{"title":"Battery Anodes","description":"\u003cp\u003e\u003cstrong\u003eAnodes set the lower voltage limit, the lithium\/sodium\/zinc inventory, and the cycle-life ceiling of every cell you build.\u003c\/strong\u003e This collection covers the active materials and pre-formed metal electrodes researchers actually swap in and out when benchmarking lithium-ion, sodium-ion, zinc-ion, and aluminum-ion chemistries — from carbon powders to alkali-metal foils to alloy chips.\u003c\/p\u003e\n\u003ch3\u003eCarbon anodes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphite (high tap density)\u003c\/strong\u003e — the workhorse Li-ion anode; spheronized natural graphite for high volumetric capacity and dense coatings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard carbon\u003c\/strong\u003e — non-graphitizable, disordered carbon with expanded interlayer spacing and micropores; the leading commercial Na-ion anode via the adsorption \/ intercalation \/ pore-filling mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft carbon\u003c\/strong\u003e — graphitizable, turbostratic carbon used in Na-ion cells where a sloping voltage profile and moderate capacity are acceptable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSilicon and oxide anodes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicon micropowder\u003c\/strong\u003e and \u003cstrong\u003eSi\/C composites\u003c\/strong\u003e — high-capacity Li-ion anodes that trade large volumetric expansion for capacities far above graphite; carbon scaffolds buffer the strain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLithium titanate (Li4Ti5O12)\u003c\/strong\u003e — a spinel-structured zero-strain anode operating around 1.55 V vs Li\/Li+, valued for safety, rate capability, and long cycle life rather than energy density.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAlkali-metal and metal anodes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLithium-coated copper foil\u003c\/strong\u003e — ultrathin Li on Cu current collector for prelithiation and Li-metal cell builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLithium alloy chips (Li-B, Li-Si, Li-In, Li-Sn, Li-Zn, Li-Mg, Li-Al)\u003c\/strong\u003e — host-stabilized lithium for dendrite-mitigated metal anodes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSodium foil\u003c\/strong\u003e — counter-electrode for half-cell screening of Na-ion cathodes and a building block for Na-metal and anode-free prototypes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZinc foil\u003c\/strong\u003e and \u003cstrong\u003ezinc-coated copper foil\u003c\/strong\u003e — substrates and pre-formed electrodes for aqueous Zn-ion cells, including carbon-interlayer designs aimed at suppressing dendrites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum electrodes (disc, sheet, roll)\u003c\/strong\u003e — Al metal anodes for Al-ion battery research, supplied in coin-cell discs and pouch-cell formats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are screening new Na-ion cathodes, start with hard carbon or sodium foil as your counter-electrode. For Li-ion energy-density work, move from graphite to Si\/C composites or Li-metal foils; for safety-first or fast-charge cells, see lithium titanate. For aqueous and post-lithium chemistries, browse the zinc and aluminum electrode formats. Pair any of these with matching \u003ca href=\"\/collections\/cathodes\"\u003eCathodes\u003c\/a\u003e, \u003ca href=\"\/collections\/electrolytes\"\u003eElectrolytes\u003c\/a\u003e, \u003ca href=\"\/collections\/separators\"\u003eSeparators\u003c\/a\u003e, and \u003ca href=\"\/collections\/current-collectors\"\u003eCurrent Collectors\u003c\/a\u003e to complete your cell.\u003c\/p\u003e","products":[{"product_id":"clibang","title":"Natural Graphite Powder for Li-Ion Battery Anode, 100-500 g\/bottle, CLIBANG","description":"\u003cp\u003e\u003cspan\u003eNatural graphite is used as a lithium-ion battery anode due to its low cost, high theoretical capacity, and stable layered structure, which allows lithium ions to be stored efficiently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100.036%; height: 196px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 32.8941%; height: 19.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.8901%; height: 19.6px;\"\u003e\u003cspan\u003eCLIBANG (C-LIB-A-NG)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 32.8941%; height: 19.6px;\"\u003e \u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.8901%; height: 19.6px;\"\u003e\u003cspan\u003eD10 = 10.7 um,   D50 = 18.0 um,    D90 = 29.8 um\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 32.8941%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.8901%; height: 19.6px;\"\u003e\u003cspan\u003e1.05 g\/cm3\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 32.8941%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Area Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.8901%; height: 19.6px;\"\u003e\u003cspan\u003e3.52 m2\/g\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 32.8941%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.8901%; height: 19.6px;\"\u003e\u003cspan\u003e365 mAh\/g\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"width: 32.8941%; height: 58.8px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.8901%; height: 58.8px;\"\u003e\u003cspan\u003e95.2% (Recommended Electrolyte: 1M LiPF6 in ECEC:DMC:EMC=1:1:1 with 1.0%VC, 1-3 cycles of formation should be done before real testing)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 32.8941%; height: 39.2px;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.8901%; height: 39.2px;\"\u003e\u003cspan\u003e100 g, 200 g, and 500 g\/bottle (a \u003cstrong\u003elarger quantity can be supplied upon request\u003c\/strong\u003e)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the natural graphite powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/adma.202206020\" target=\"_blank\"\u003eC. Sun, et al. 50C Fast-Charge Li-Ion Batteries using a Graphite Anode, Adv. Mater. 2022, 34, 2206020\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/10.1002\/anie.201904258\" rel=\"noopener\" target=\"_blank\"\u003eL. Fan, et al. Graphite Anode for a Potassium-Ion Battery with Unprecedented Performance, Angew. Chem. Int. Ed., 2019, 58, 10500-10505.\u003c\/a\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"100 g","offer_id":47913255207142,"sku":"CLIBANG100","price":49.0,"currency_code":"USD","in_stock":true},{"title":"200 g","offer_id":47913255239910,"sku":"CLIBANG200","price":89.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47913255272678,"sku":"CLIBANG500","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBANG.png?v=1763451908"},{"product_id":"clibaag","title":"Artificial Graphite Powder for Li-Ion Battery Anode, 100-500 g\/bottle, CLIBAAG","description":"\u003cp\u003e\u003cspan\u003eArtificial graphite is used as a lithium-ion battery anode due to its low cost, high theoretical capacity, and stable layered structure, which allows lithium ions to be stored efficiently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 208.4px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAAG (C-LIB-A-AG)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD10 = 6.6 um;   \u003c\/span\u003e\u003cspan\u003eD50 = 15.5 um;   D90 = 27.8 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 19.6px;\"\u003e0.87 \u003cspan\u003eg\/cm3\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 19.6px;\"\u003e2.05 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 19.6px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 19.6px;\"\u003e356 mAh\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 58.8px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 58.8px;\"\u003e95.6% \u003cspan\u003e(Recommended Electrolyte: 1M LiPF6 in ECEC:DMC:EMC=1:1:1 with 1.0%VC, 1-3 cycles of formation should be done before real testing)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 19.6px;\"\u003e\u003cem\u003ePackage Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 19.6px;\"\u003e100, 200, 500 g\/bottle (\u003cstrong\u003elarge quantity can be supplied upon request\u003c\/strong\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the graphite powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/adma.202206020\" target=\"_blank\"\u003eC. Sun, et al. 50C Fast-Charge Li-Ion Batteries using a Graphite Anode, Adv. Mater. 2022, 34, 2206020\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/10.1002\/anie.201904258\" rel=\"noopener\" target=\"_blank\"\u003eL. Fan, et al. Graphite Anode for a Potassium-Ion Battery with Unprecedented Performance, Angew. Chem. Int. Ed., 2019, 58, 10500-10505.\u003c\/a\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"100 g","offer_id":47513900450022,"sku":"CLIBAAG100","price":59.0,"currency_code":"USD","in_stock":true},{"title":"200 g","offer_id":47896550473958,"sku":"CLIBAAG200","price":109.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47513900482790,"sku":"CLIBAAG500","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAAG.png?v=1763451724"},{"product_id":"clibamcmb","title":"MesoCarbon MicroBeads (MCMB) Graphite Powder for Li-Ion Battery Anode, 100-500 g\/bottle, CLIBAMCMB","description":"\u003cp\u003eMesoCarbon MicroBeads (MCMB) are a type of advanced graphite material used as an anode in lithium-ion batteries. These microbeads are characterized by their uniform, spherical shape and high purity, which contribute to excellent electrical conductivity, charge\/discharge efficiency, and cycle stability.\u003c\/p\u003e\n\u003cp\u003eKey features of MesoCarbon MicroBeads in batteries include:\u003c\/p\u003e\n\u003cp\u003eHigh specific capacity\u003cbr\u003eLong cycle life\u003cbr\u003eFast charging capability\u003cbr\u003eEnhanced stability and performance in lithium-ion batteries\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 228px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAMCMB (C-LIB-A-MCMB)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD10 = 8.1 um;   \u003c\/span\u003e\u003cspan\u003eD50 = 17.8 um;   D90 = 33.5 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 19.6px;\"\u003e1.33 \u003cspan\u003eg\/cm3\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 19.6px;\"\u003e2.25 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 19.6px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 19.6px;\"\u003e346 mAh\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 58.8px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 58.8px;\"\u003e93.5% \u003cspan\u003e(Recommended Electrolyte: 1M LiPF6 in ECEC:DMC:EMC=1:1:1 with 1.0%VC, 1-3 cycles of formation should be done before real testing)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 33.6748%; height: 39.2px;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9655%; height: 39.2px;\"\u003e\n\u003cspan\u003e100 g, 250 g, and 500 g\/bottle (a \u003c\/span\u003e\u003cstrong\u003elarger quantity can be supplied upon request\u003c\/strong\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the graphite powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775318304828\" rel=\"noopener\" target=\"_blank\"\u003eP. Han, et al. Mesocarbon microbead based dual-carbon batteries towards low cost energy storage devices, J. Power Sources, 2018, 393, 145-151\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/10.1002\/anie.201904258\" rel=\"noopener\" target=\"_blank\"\u003eS. Yang, et al. Electrochemical performance of expanded mesocarbon microbeads as anode material for lithium-ion batteries, Electrochemistry Communications, 2006, 8, 137-142.\u003c\/a\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"100 g","offer_id":47899299578086,"sku":"CLIBAMCMB100","price":49.0,"currency_code":"USD","in_stock":true},{"title":"250 g","offer_id":47899299610854,"sku":"CLIBAMCMB250","price":99.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47899299643622,"sku":"CLIBAMCMB500","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAMCMB.png?v=1763452397"},{"product_id":"clibaeg","title":"Expanded Graphite Powder for Li-Ion Battery Anode, 100-500 g\/bottle, CLIBAEG","description":"\u003cp\u003eExpanded graphite is used as an anode material in batteries, offering improved performance over traditional graphite due to its unique, porous structure that allows for faster charging and better stability. This expanded structure, created by increasing the space between graphite layers, facilitates the insertion of ions like lithium and sodium, leading to higher capacity, faster kinetics, and more stable cycle life. \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 88.4451%; height: 90.4px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 39.6131%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.8802%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAEG (C-LIB-A-EG)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18.8875px;\"\u003e\n\u003ctd style=\"width: 39.6131%; height: 18.8875px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 59.8802%; height: 18.8875px;\"\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eD50 = 48.2 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.75px;\"\u003e\n\u003ctd style=\"width: 39.6131%; height: 35.75px;\"\u003e\u003cem\u003eExpansion Start Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.8802%; height: 35.75px;\"\u003e290 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.7625px;\"\u003e\n\u003ctd style=\"width: 39.6131%; height: 35.7625px;\"\u003e\u003cem\u003eExpansion Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.8802%; height: 35.7625px;\"\u003e\u0026gt; 200 times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 39.6131%;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.8802%;\"\u003e100 g, 200 g, and 500 g\/bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the expandable graphite powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0013468613011389\" target=\"_blank\"\u003e\u003cspan\u003eL. Bai, et al. A comparative study of electrochemical performance of graphene sheets, expanded graphite and natural graphite as anode materials for lithium-ion batteries, Electrochimica Acta, 2013, 107, 555-561.\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.nature.com\/articles\/ncomms5033\" target=\"_blank\"\u003eY. Wen, et al. Expanded graphite as superior anode for sodium-ion batteries, Nature Communications, 2014, 5, 4033.\u003c\/a\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"100 g","offer_id":47913256812774,"sku":"CLIBAEG100","price":49.0,"currency_code":"USD","in_stock":true},{"title":"200 g","offer_id":47913256845542,"sku":"CLIBAEG200","price":89.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47913256878310,"sku":"CLIBAEG500","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAEG.png?v=1763452513"},{"product_id":"clibasioc","title":"Silicon Monoxide (SiO) Powder with Carbon Coating for Li-Ion Battery Anode, 100 g\/bottle, CLIBASiOC","description":"\u003cp\u003eSiO is a promising alternative to traditional graphite due to its high theoretical capacity, which can significantly increase battery energy density.\u003c\/p\u003e\n\u003cp\u003eKey features of SiO-based batteries:\u003c\/p\u003e\n\u003cp\u003eHigh capacity: SiO can provide higher specific capacity (up to 2,200 mAh\/g) compared to graphite (370 mAh\/g)\u003cbr\u003eVolume expansion management: SiO undergoes less volume change than pure silicon, improving cycle stability\u003cbr\u003ePotential for advanced energy storage: Ideal for applications demanding higher energy densities like electric vehicles and portable electronics\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 303.6px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBASiOC (C-LIB-A-SiO@C)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD10 = 3.2 um;   \u003c\/span\u003e\u003cspan\u003eD50 = 5.6 um;   D90 = 9.0 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e1.32 \u003cspan\u003eg\/cm3\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e1.17 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 154px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 154px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 154px;\"\u003e\n\u003cp\u003e1230 mAh\/g\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ECS-LIB-A-SiO-Charge-Discharge_Curve_160x160.jpg?v=1761545289\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 39.2px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 39.2px;\"\u003e90.9% \u003cspan\u003e(1-3 cycles of formation should be done before real testing)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.040406jes\/meta\" target=\"_blank\"\u003eJ. K. Lee, et al. Kinetics of Reaction Products of Silicon Monoxide with Controlled Amount of Li-Ion Insertion at Various Current Densities for Li-Ion Batteries, J. Electrochem. Soc. 2014, 161, A927\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.2c15455\" rel=\"noopener\" target=\"_blank\"\u003eL. Zhang, et al. Optimal Microstructure of Silicon Monoxide as the Anode for Lithium-Ion Batteries, ACS Appl. Mater. Interfaces, 2022, 14, 51965–51974\u003c\/a\u003e. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":46786589655270,"sku":"CLIBASiOC","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBASiOC.png?v=1763454742"},{"product_id":"clibafcg","title":"Fast Charging Graphite Powder for Li-Ion Battery Anode, 100-500 g\/bottle, CLIBAFCG","description":"\u003cp\u003eBeside the high electrical conductivity and high ionic accessibility, this type of graphite powder has appropriate small particle size that has a short Li diffusion pathway, as well as enlarged interlayer spacing for facilitating the Li+ intercalation kinetics.\u003c\/p\u003e\n\u003ctable style=\"width: 100.036%; height: 319.8px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 25.7102%; height: 19.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.0741%; height: 19.6px;\"\u003eCLIBAFCG (C-LIB-A-FCG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 25.7102%; height: 39.2px;\"\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.0741%; height: 39.2px;\"\u003eD10 = 5.4 um, D50 = 9.0 um, D90 = 15.5 um\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 25.7102%; height: 19.6px;\"\u003eTap Density\u003c\/td\u003e\n\u003ctd style=\"width: 74.0741%; height: 19.6px;\"\u003e1.05 g\/cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 25.7102%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Area Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.0741%; height: 19.6px;\"\u003e3.40 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 163px;\"\u003e\n\u003ctd style=\"width: 25.7102%; height: 163px;\"\u003e\u003cem\u003eFirst Discharge Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.0741%; height: 163px;\"\u003e\n\u003cp\u003e345 mAh\/g\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ECS-LIB-A-FCG-Charge-Discharge_Curve_160x160.jpg?v=1761713598\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ECS-LIB-A-FCG-Cycling_Stability_160x160.jpg?v=1761713844\" alt=\"\" style=\"float: none;\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"width: 25.7102%; height: 58.8px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.0741%; height: 58.8px;\"\u003e92.0% (Recommended Electrolyte: 1M LiPF6 in ECEC:DMC:EMC=1:1:1 with 1.0%VC, 1-3 cycles of formation should be done before real testing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 25.7102%;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.0741%;\"\u003e\n\u003cspan\u003e100 g, 200 g, and 500 g\/bottle (a \u003c\/span\u003e\u003cstrong\u003elarger quantity can be supplied upon request\u003c\/strong\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the fast-charging graphite powder in a dry area (glovebox is preferred); (2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsnano.2c05428\"\u003eJ. Qian, et al. Insights into the Enhanced Reversibility of Graphite Anode Upon Fast Charging Through Li Reservoir, ACS Nano, 2022, 16, 20197–20205\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/adfm.202506190\"\u003eY. Dong, et al. Review on Graphite Anodes for Fast-Charging Lithium-Ion Batteries: Mechanism, Modification and Characterizations, Adv. Funct. Mater., 2025, DOI: 10.1002\/adfm.202506190\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"100 g","offer_id":47913270575334,"sku":"CLIBAFCG100","price":59.0,"currency_code":"USD","in_stock":true},{"title":"200 g","offer_id":47913270608102,"sku":"CLIBAFCG200","price":109.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47913270640870,"sku":"CLIBAFCG500","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAFCG.png?v=1763452934"},{"product_id":"clibausi","title":"Silicon (Si) Micropowder for Li-Ion Battery Anode, 100 g\/bottle, CLIBAuSi","description":"\u003cp\u003ePolycrystalline silicon powder with micron size (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eno coating\u003c\/span\u003e) is an excellent high-energy density lithium-ion battery anode\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100.036%; height: 125.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAuSi (C-LIB-A-uSi)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD10 = 1.4 um,   D50 = 5.2 um,    D90 = 10.5 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e\n\u003cp\u003e~3600 mAh\/g\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ECS-LIB-A-uSi-Charge-Discharge_Curve_160x160.jpg?v=1761715978\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 30.8px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 30.8px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 30.8px;\"\u003e82.4 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.nature.com\/articles\/s41467-023-43093-6\" rel=\"noopener\" target=\"_blank\"\u003eY. F. Tian, et al. Tailoring chemical composition of solid electrolyte interphase by selective dissolution for long-life micron-sized silicon anode, Nature Communications, 2023, 14, 7247\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsaem.3c00951\"\u003eY. Ma, et al. Low-Cost Micron-Scale Silicon-Based Anodes for High-Performance Lithium-Ion Batteries, ACS Appl. Energy Interfaces, 2023, 6, 7545–7555\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Default Title","offer_id":46802204459238,"sku":"CLIBAuSi","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAuSi.png?v=1763453188"},{"product_id":"clibansi","title":"Silicon (Si) Nanopowder for Li-Ion Battery Anode, 50-500 g\/bottle, CLIBAnSi","description":"\u003cp\u003ePolycrystalline silicon powder with nano-size (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eno coating\u003c\/span\u003e) is an excellent high-energy density lithium-ion battery anode\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100.036%; height: 345.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAnSi (C-LIB-A-nSi)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eMonodisperse size is in 80-100 nm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003eSpecific Surface Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e45 m2\/g\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003eXRD\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAnSi_XRD_160x160.jpg?v=1779718995\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 203.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 203.2px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 203.2px;\"\u003e\n\u003cp\u003e~3500 mAh\/g\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-nSi-Charge-Discharge_Curve_160x160.jpg?v=1762480369\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003eRecommended slurry formula: nano-size silicon: SP: PAALi = 70:15:15\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/am401642c\" rel=\"noopener\" target=\"_blank\"\u003eC. Erk, et al. Toward Silicon Anodes for Next-Generation Lithium Ion Batteries: A Comparative Performance Study of Various Polymer Binders and Silicon Nanopowders, ACS Appl. Mater. Interfaces, 2013, 5, 7299–7307\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/aenm.202102181\"\u003eH. Li, et al. Revisiting the Preparation Progress of Nano-Structured Si Anodes toward Industrial Application from the Perspective of Cost and Scalability, Adv. Energy Mater., 2022, 12, 2102181\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"50 g","offer_id":47713962819814,"sku":"CLIBAnSi50","price":79.0,"currency_code":"USD","in_stock":true},{"title":"100 g","offer_id":47713962852582,"sku":"CLIBAnSi100","price":129.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47713962885350,"sku":"CLIBAnSi500","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAnSi_main.png?v=1779717897"},{"product_id":"clibansic","title":"Silicon Nanoparticle\/Porous Carbon (Si\/C) Composite Powder for Li-Ion Battery Anode, 100-500 g\/bottle, CLIBAnSiC","description":"\u003cp\u003eSilicon-carbon (Si\/C) composite anodes represent a significant advancement in battery technology, particularly for lithium-ion batteries. These materials leverage the high theoretical capacity of silicon (~4200 mAh\/g) while addressing its challenges, such as significant volume expansion during charge and discharge cycles, by integrating carbon.\u003c\/p\u003e\n\u003cp\u003eThe CVD process for depositing carbon on silicon anodes involves the introduction of organic gas into the pores of porous carbon particles, followed by high-temperature pyrolysis to deposit silicon nanoparticles. \u003c\/p\u003e\n\u003ctable style=\"width: 100.036%; height: 261.75px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAnSiC (C-LIB-A-nSi@C)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eChemical Composition\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eSi : C = 48wt% : 52wt%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 15.2px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 15.2px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD 10 = 4.0 um,  D50 = 8.0 um,   D90 = 13.0 um\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003eSpecific Surface Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e~8.0 m2\/g\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003e1.4 g\/cm3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 180.15px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 180.15px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 180.15px;\"\u003e\n\u003cp\u003e~1816 mAh\/g (0.1 C, 0.005V-1.5 V)\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-nSiC-charge-discharge_160x160.jpg?v=1762475753\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e93.8 %\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e100 g, 200 g, and 500 g\/bottle\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/am401642c\" target=\"_blank\"\u003eC. Erk, et al. Toward Silicon Anodes for Next-Generation Lithium Ion Batteries: A Comparative Performance Study of Various Polymer Binders and Silicon Nanopowders, ACS Appl. Mater. Interfaces, 2013, 5, 7299–7307\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/aenm.202102181\"\u003eH. Li, et al. Revisiting the Preparation Progress of Nano-Structured Si Anodes toward Industrial Application from the Perspective of Cost and Scalability, Adv. Energy Mater., 2022, 12, 2102181\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"100 g","offer_id":47899271004390,"sku":"CLIBAnSiC100","price":69.0,"currency_code":"USD","in_stock":true},{"title":"200 g","offer_id":47899271037158,"sku":"CLIBAnSiC200","price":119.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47899271069926,"sku":"CLIBAnSiC500","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAnSiC.png?v=1763453377"},{"product_id":"clibansig","title":"Silicon Nanoparticle\/Conductive Graphite (Si\/G) Composite Powder for Li-Ion Battery Anode, 100g\/bottle, CLIBAnSiG","description":"\u003cp\u003eThe C-LIB-A-nSi\/G anode is prepared by mechanical milling of silicon nanopowder and conductive graphite. The mass ratio of Si : Graphite is 1:9.  \u003c\/p\u003e\n\u003cp\u003eConductive graphite is the commercial anode (≈372 mAh\/g) with good cycle life and volumetric density; adding a controlled amount of Si (~10wt%) raises specific and volumetric capacity without the severe mechanical failure of pure Si electrodes.\u003c\/p\u003e\n\u003cp\u003eThis composite improved gravimetric and volumetric energy density compared with pure graphite, better initial coulombic efficiency than pure nano-Si when Si is limited and well-integrated, easier scale-up using existing graphite electrode processes.\u003c\/p\u003e\n\u003ctable style=\"width: 100.036%; height: 261.75px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAnSiG (C-LIB-A-nSi\/G)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 15.2px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 15.2px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD 10 = 4.2 um,  D50 = 10.4 um,   D90 = 24.0 um\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003eSpecific Surface Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e~2.0 m2\/g\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003e1.02 g\/cm3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 180.15px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 180.15px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 180.15px;\"\u003e\n\u003cp\u003e~446.6 mAh\/g (0.1 C, 0.005V-1.5 V)\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-nSiC-G-charge-discharge_curve_160x160.jpg?v=1762485837\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e91.4 %\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.1261807jes\/meta\"\u003eM, Wetjen, et al. Morphological Changes of Silicon Nanoparticles and the Influence of Cutoff Potentials in Silicon-Graphite Electrodes, J. Electrochem. Soc., 2018, 165 A1503\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/anie.201902085\"\u003eS. Chae, et al. Integration of Graphite and Silicon Anodes for the Commercialization of High-Energy Lithium-Ion Batteries, Angew Chem Int Ed, 2020, 59, 110-135\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Default Title","offer_id":46841689407718,"sku":"CLIBAnSiG","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAnSiG.png?v=1763453490"},{"product_id":"clibalto","title":"Lithium Titanate (Li4Ti5O12) Powder (Pristine or Carbon Coating) for Li-Ion Battery Anode, 100 g\/bottle, CLIBALTO","description":"\u003cp\u003eLithium titanate (Li4Ti5O12) a spinel-structured anode material for lithium-ion batteries, which is used as the active material in place of traditional graphite. It possesses the following key features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating potential ≈1.55 V vs Li+\/Li (above plating potential) — greatly reduces lithium dendrite risk.\u003c\/li\u003e\n\u003cli\u003eExcellent structural stability with negligible volume change (~0.2%) on lithiation — exceptional cycle life.\u003c\/li\u003e\n\u003cli\u003eGood rate capability (fast Li+ diffusion in the spinel structure) and safety.\u003cbr\u003eModerate specific capacity ≈175 mAh\/g (theoretical ~175 mAh\/g, practical ~150–170 mAh\/g).\u003c\/li\u003e\n\u003cli\u003eHigh first-cycle coulombic efficiency and long calendar life.\u003c\/li\u003e\n\u003cli\u003eLower cell-level energy density because the higher anode potential reduces full-cell voltage versus graphite.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"100%\" style=\"width: 102.354%; height: 261.75px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40.0988%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.5147%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBALTO (C-LIB-A-LTO)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40.0988%;\"\u003e\u003cem\u003eChemical Formula\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.5147%;\"\u003e\n\u003cp\u003e\u003cspan\u003eLi4Ti5O12 (pristine) or \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003eLi4Ti5O12@C (carbon coated)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.2px;\"\u003e\n\u003ctd style=\"width: 40.0988%; height: 15.2px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 59.5147%; height: 15.2px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD 10 = 0.6 um,  D50 = 1.3 um,  D90 = 12.0 um\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 40.0988%; height: 35.6px;\"\u003e\u003cem\u003eSpecific Surface Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.5147%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e~6.0 m2\/g\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40.0988%;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.5147%;\"\u003e\n\u003cp\u003e\u003cspan\u003e0.65 g\/cm3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 180.15px;\"\u003e\n\u003ctd style=\"width: 40.0988%; height: 180.15px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.5147%; height: 180.15px;\"\u003e\n\u003cp\u003e~160 mAh\/g (1.0 C)\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-LTO-P-Charge-Dsicharge_160x160.jpg?v=1762501892\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-LTO-C-Charge-Dsicharge_160x160.jpg?v=1762501934\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 40.0988%;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 59.5147%;\"\u003e\n\u003cp\u003e95.0 %\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3519070\/meta\" rel=\"noopener\" target=\"_blank\"\u003eG. N. Zhu, et al. A Comprehensive Study of Effects of Carbon Coating on Li4Ti5O12 Anode Material for Lithium-Ion Batteries, J. Electrochem. Soc., 2011, 158, A102\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775312008312\" rel=\"noopener\" target=\"_blank\"\u003eX. Guo, et al. Carbon coating of Li4Ti5O12 using amphiphilic carbonaceous material for improvement of lithium-ion battery performance, J. Power Sources, 2012, 214, 107-112\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Pristine","offer_id":46844115878118,"sku":"CLIBALTOP","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Carbon Coating","offer_id":46844115910886,"sku":"CLIBALTOC","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBALTOP_main.png?v=1777373731"},{"product_id":"clibaelc","title":"Lithium Chips (D=12-16.0 mm, T = 0.2-1.0 mm) as Anode Electrode for Li-Ion Battery, 5 g\/bottle, CLIBAELC","description":"\u003cp\u003eLithium metal has been demonstrated as promising anode material with high energy density compared to the conventional graphite anode. The chip shape is good for coin cell assembling and testing.\u003c\/p\u003e\n\u003cp\u003eThe main features are shown below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely high specific capacity: 3,860 mAh\/g (highest among common anode materials).\u003c\/li\u003e\n\u003cli\u003eVery low electrochemical potential: ~0 V vs Li+\/Li, maximizing cell voltage.\u003cbr\u003eLow density: enables high gravimetric energy density.\u003c\/li\u003e\n\u003cli\u003eSimple single‑element electrode: enables thin, minimal‑mass anode designs (anode‑free options).\u003c\/li\u003e\n\u003cli\u003eReactivity: highly reactive with electrolytes\/air—forms SEI and requires careful handling.\u003c\/li\u003e\n\u003cli\u003eDendrite propensity: prone to dendritic\/plating instabilities that can cause short circuits and safety risks.\u003c\/li\u003e\n\u003cli\u003eLarge volumetric\/structural changes during plating\/stripping: causes loss of contact and capacity fade if not accommodated.\u003c\/li\u003e\n\u003cli\u003eRequires interface\/electrolyte engineering: stable SEI, protective layers, solid electrolytes, or structured hosts are essential for practical cycling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable style=\"width: 100.036%; height: 550.875px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAELC (C-LIB-AE-LC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 45.275px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 45.275px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 45.275px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.9% for Lithium content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003eColor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eSilver (slight grey may appear)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 106.8px;\"\u003e\u003cem\u003eLi Chip Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 106.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003e(1) Φ12 mm, T1.0 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(2) Φ12.5 mm, T0.55 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(3) Φ14 mm, T0.3, 0.45, 0.6, and 1.0 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(4) Φ15 mm, T0.5, and 1.0 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(5) Φ16 mm, T0.2, 0.6, and 1.0 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 197.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 197.6px;\"\u003e\u003cem\u003eBottle Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 197.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e~5 g\/bottle for all chip sizes (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e10g, 20 g, 50 g, and 100 g\/bottle grade also can be supplied upon request\u003c\/span\u003e)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTake Φ16 mm Li chip as an example:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e0.2 mm thickness:  ~240 pcs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e0.6 mm thickness: ~80 pcs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.0 mm thickness: ~50 pcs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOther chip thickness, such as 0.4mm, 0.8 mm, 1.2 mm, and 1.5 mm can be supplied upon request\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 55.2px;\"\u003e\u003cem\u003eSample Package\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 55.2px;\"\u003e\n\u003cp\u003eThe lithium chips are sealed in an aluminum can that is further sealed with a vacuum bag.    \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 74.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 74.8px;\"\u003e\u003cem\u003eAttention\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 74.8px;\"\u003e\n\u003cp\u003eThe aluminum can with lithium chips must be opened inside a glove box with Argon Gas and moisture less than 1%RH (0.1 ppm is better).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.nature.com\/articles\/s41560-018-0199-8\" target=\"_blank\"\u003eS. Jiao, et al. Stable cycling of high-voltage lithium metal batteries in ether electrolytes, Nature Energy, 2018, 3, 739–746\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.nature.com\/articles\/nnano.2017.16\" target=\"_blank\"\u003eD. Lin, et al. Reviving the lithium metal anode for high-energy batteries, Nature Technology, 2017, 12, 194–206\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"KLD","offers":[{"title":"Φ12 mm \u0026 T1.0 mm","offer_id":47714045133030,"sku":"CLIBAELCD12T10","price":119.0,"currency_code":"USD","in_stock":true},{"title":"Φ12.5 mm \u0026 T0.55 mm","offer_id":47717706957030,"sku":"CLIBAELCD125T055","price":119.0,"currency_code":"USD","in_stock":true},{"title":"Φ14 mm \u0026 T0.3 mm","offer_id":47714045165798,"sku":"CLIBAELCD14T03","price":129.0,"currency_code":"USD","in_stock":true},{"title":"Φ14 mm \u0026 T0.45 mm","offer_id":47714045198566,"sku":"CLIBAELCD14T045","price":129.0,"currency_code":"USD","in_stock":true},{"title":"Φ14 mm \u0026 T0.6 mm","offer_id":47714045231334,"sku":"CLIBAELCD14T06","price":129.0,"currency_code":"USD","in_stock":true},{"title":"Φ14 mm \u0026 T1.0 mm","offer_id":47714045264102,"sku":"CLIBAELCD14T10","price":129.0,"currency_code":"USD","in_stock":true},{"title":"Φ15 mm \u0026 T0.5 mm","offer_id":47717712888038,"sku":"CLIBAELCD15T05","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Φ15 mm \u0026 T1.0 mm","offer_id":47717712920806,"sku":"CLIBAELCD15T10","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Φ15.6 mm \u0026 T0.45 mm","offer_id":47717712953574,"sku":"CLIBAELCD156T045","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Φ16 mm \u0026 T0.2 mm","offer_id":46844172992742,"sku":"CLIBAELCD16T02","price":149.0,"currency_code":"USD","in_stock":true},{"title":"Φ16 mm \u0026 T0.6 mm","offer_id":46844173025510,"sku":"CLIBAELCD16T06","price":149.0,"currency_code":"USD","in_stock":true},{"title":"Φ16 mm \u0026 T1.0 mm","offer_id":46844173058278,"sku":"CLIBAELCD16T10","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-LiC-main.jpg?v=1762835939"},{"product_id":"clibaelixc","title":"Lithium Alloy (LiX, X= B, In, Sn, Zn, Mg, Al) Chips (D=16.0 mm, T=0.6 mm) as Anode Electrode for Li-Ion Battery, 10 g\/bottle, CLIBAELiXC","description":"\u003cp\u003eA lithium alloy battery anode is a composite material designed to improve the performance of lithium metal anodes by mitigating issues like dendrite formation and reactivity with electrolytes. It typically consists of a host structure, such as a 3D scaffold, made of other metals like aluminum, indium, or zinc, which holds and interacts with metallic lithium. This alloy structure helps provide a more stable and uniform lithium deposition during charging, which leads to enhanced cycling stability, safety, and a higher energy density compared to pure lithium metal anodes, while still outperforming conventional graphite anodes. \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100.036%; height: 415.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAELiXC (C-LIB-AE-LiXC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 159.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 159.2px;\"\u003e\u003cem\u003eChemical Composition\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 159.2px;\"\u003e\n\u003cp\u003e\u003cspan\u003eLi-B  (Li: ~99%, B: ~1%)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLi-In  (Li: ~50%, In: ~50%)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLi-Sn (Li: ~95%, Sn: ~5%)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLi-Zn  (Li: ~97%, Sn: ~3%)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLi-Mg  (Li: ~75%, Mg: ~25%)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLi-Al  (Li: ~99.5%, Al: ~0.5%)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 90.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 90.8px;\"\u003e\u003cem\u003eBottle Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 90.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003e10 g\/bottle (\u003c\/span\u003e\u003cspan\u003e~100-150 pcs)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOther chip diameters within 6 mm to 25 mm and thickness in 0.2 mm to 1.0 mm can be provided upon request. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 55.2px;\"\u003e\u003cem\u003eSample Package\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 55.2px;\"\u003e\n\u003cp\u003eThe lithium chips are sealed in an aluminum can that is further sealed with a vacuum bag.    \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 74.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 74.8px;\"\u003e\u003cem\u003eAttention\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 74.8px;\"\u003e\n\u003cp\u003eThe aluminum can with lithium alloy chips must be opened inside a glove box with Argon Gas and moisture less than 1%RH (0.1 ppm is better).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acb38c\/meta\" rel=\"noopener\" target=\"_blank\"\u003eS. Tan, et al. Multiple Modifications of Li-B Alloy Anodes for Primary Batteries, J. Electrochem. Soc., 2023, 170, 010531\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2019\/nr\/c9nr03986d\/unauth\"\u003eG. Wang, et al. New insights into Li diffusion in Li–Si alloys for Si anode materials: role of Si microstructures, Nanoscale, 2019, 11, 14042-14049\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/pubs.acs.org\/doi\/full\/10.1021\/acsenergylett.3c02274\" target=\"_blank\"\u003eJ. Aspinall, et al. Effect of Microstructure on the Cycling Behavior of Li–In Alloy Anodes for Solid-State Batteries, ACS Energy Letter, 2024, 9, 578–585\u003c\/a\u003e. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Li-B","offer_id":46846359503078,"sku":"CLIBAELiBC","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Li-In","offer_id":46846359568614,"sku":"CLIBAELiInC","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Li-Sn","offer_id":46846519869670,"sku":"CLIBAELiSnC","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Li-Zn","offer_id":46846519902438,"sku":"CLIBAELiZnC","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Li-Mg","offer_id":46846519935206,"sku":"CLIBAELiMgC","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Li-Al","offer_id":46846519967974,"sku":"CLIBAELiAlC","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-LiC-main.jpg?v=1762835939"},{"product_id":"clibaelf","title":"Lithium Foil (W= 50-100mm, T = 5-200 um) as Anode Electrode for Li-Ion Battery, CLIBAELF","description":"\u003cp\u003eThin lithium metal foil can be used as battery anode for fabricating lab-scale pouch cell (typically 20–500 µm thick), microbatteries, or as Li source for plating.\u003c\/p\u003e\n\u003cp\u003eThe main features are shown below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh areal and gravimetric capacity (3,860 mAh\/g).\u003c\/li\u003e\n\u003cli\u003eVery low potential (~0 V vs Li+\/Li).\u003c\/li\u003e\n\u003cli\u003eExtremely reactive to air\/moisture — oxidizes\/tarnishes and forms contaminants if exposed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable style=\"width: 100.036%; height: 323.275px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAELF (C-LIB-AE-LF)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 15.275px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 15.275px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 15.275px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.9% for Lithium content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003eColor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eSilver (slight grey may appear)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 142.4px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 142.4px;\"\u003e\u003cem\u003eLi Foil Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 142.4px;\"\u003e\n\u003cp\u003e\u003cspan\u003eAll sizes are 10 g\/pack\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(1) T 5um * W 80mm * L 2m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(2) T 20um * W 80mm * L 2m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(3) T 30um * W 80mm * L 8m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(4) T 50um * W 80mm * L 2m \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(5) T 50um * W 80mm * L 5m \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(6) T 50um * W 100mm * L 4m  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(7) T 100um * W 60mm * L 3m \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e(8) \u003cspan\u003eT 100um * W 80mm * L 2m \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(9) T 200um * W 80mm * L 2m \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOther customized sizes (thickness, width, and length) and bulk quantity can be supplied upon request. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 55.2px;\"\u003e\u003cem\u003eSample Package\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 55.2px;\"\u003e\n\u003cp\u003eThe lithium foil roll is sealed in an aluminum can that is further sealed in a vacuum bag.    \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 74.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 74.8px;\"\u003e\u003cem\u003eAttention\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 74.8px;\"\u003e\n\u003cp\u003eThe aluminum can with lithium foil roll must be opened inside a glove box with Argon Gas and moisture less than 1%RH (0.1 ppm is better).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.nature.com\/articles\/s41467-023-41514-0\" rel=\"noopener\" target=\"_blank\"\u003eS. Huang, et al. Interfacial friction enabling ≤ 20 μm thin free-standing lithium strips for lithium metal batteries, Nature Communications, 2023, 14, 5678\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S1385894724086923?casa_token=9kY5IzU2hHAAAAAA:p-7PSAEeqU1h1xrDS8u-u-NVorI7GmcxYuEJ_kEi92H5_wVcgiu-u9c5b8XSioGwyW5mh-iutw\" target=\"_blank\"\u003eR. Yi, et al. Roll-to-roll Prelithiation of Li-ion Batteries Anodes Using Ultrathin Lithium Strips, Chemical Engineering Journal, 2024, 500, 157201\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"LRXC","offers":[{"title":"T 5um * W 80mm * L 2m","offer_id":46849707016422,"sku":"CLIBAELFT5W80L2","price":699.0,"currency_code":"USD","in_stock":true},{"title":"T 20um * W 80mm * L 2m","offer_id":46847875383526,"sku":"CLIBAELFT20W80L2","price":499.0,"currency_code":"USD","in_stock":true},{"title":"T 30um * W 80mm * L 8m","offer_id":47720434434278,"sku":"CLIBAELFT30W80L8","price":349.0,"currency_code":"USD","in_stock":true},{"title":"T 50um * W 80mm * L 2m","offer_id":47720362016998,"sku":"CLIBAELFT50W80L2","price":229.0,"currency_code":"USD","in_stock":true},{"title":"T 50um * W 80mm * L 5m","offer_id":46847875350758,"sku":"CLIBAELFT50W80L5","price":369.0,"currency_code":"USD","in_stock":true},{"title":"T 50um * W 100mm * L 4m","offer_id":47720434467046,"sku":"CLIBAELFT50W100L4","price":329.0,"currency_code":"USD","in_stock":true},{"title":"T 100um * W 60mm * L 3m","offer_id":47762478334182,"sku":"CLIBAELFT100W60L3","price":289.0,"currency_code":"USD","in_stock":true},{"title":"T 100um * W 80mm * L 2m","offer_id":47762478366950,"sku":"CLIBAELFT100W80L2","price":399.0,"currency_code":"USD","in_stock":true},{"title":"T 200um * W 80mm * L 2m","offer_id":47762478399718,"sku":"CLIBAELFT200W80L2","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-LF-main.jpg?v=1762663720"},{"product_id":"clibaelcl","title":"Lithium Coated Copper Foil as Anode Electrode for Li-Ion Battery, 1-10 m\/pack, CLIBAELCL","description":"\u003cp\u003eLithium-coated copper foil represents a pinnacle architecture for the negative electrode in next-generation Anode-Free Lithium Metal Batteries (AFLMBs) and thin-film All-Solid-State Batteries (ASSBs). By pre-depositing an ultra-thin layer of metallic lithium (\u0026lt; 20 um) onto a high-conductivity copper current collector, this composite architecture bridges the gap between traditional graphite anodes and the idealized, pure \"anode-free\" configuration. It provides a strategic lithium reservoir to compensate for irreversible capacity loss during early cycling while maintaining high volumetric and gravimetric energy densities.\u003c\/p\u003e\n\u003cp\u003eTo effectively replace standard bulk lithium foil (which is typically 50 to 150 um thick and introduces heavy volumetric dead weight), engineered lithium-coated copper foils must meet precise geometric and chemical targets: (1) \u003cem\u003eCopper Substrate Thickness\u003c\/em\u003e: Typically 4.5\\ um to 9 um. Ultra-thin, battery-grade rolled-annealed (RA) or electrodeposited (ED) copper foil is preferred to maximize energy density. (2) \u003cem\u003eLithium Coating Thickness\u003c\/em\u003e: Typically customized from 1um to 20um depending on the specific capacity matching requirements of the cathode. (3) \u003cem\u003eCapacity Contribution\u003c\/em\u003e: A 1um thick layer of pure lithium corresponds to an areal capacity density of approximately 0.206 mAh cm^{-2}. Therefore, a 10 um coating delivers ~2.06 mAh cm^{-2}, aligning perfectly with commercial lean-lithium protocols.\u003c\/p\u003e\n\u003ctable style=\"width: 100.036%; height: 295.275px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 22.875px;\"\u003e\n\u003ctd style=\"width: 34.1558%; height: 22.875px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.4487%; height: 22.875px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBAELCL (C-LIB-AE-LCL)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 142.4px;\"\u003e\n\u003ctd style=\"width: 34.1558%; height: 142.4px;\"\u003e\u003cem\u003eFoil Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.4487%; height: 142.4px;\"\u003e\n\u003cp\u003e\u003cspan\u003e(1) 20um*80mm Li + 6um*100mm Cu (Single Side, Central), L 1m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e(2) 5\u003cspan\u003e0um*80mm Li + 6um*100mm Cu (Single Side, Central), L 1m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(3) 20um*80mm Li + 6um*100mm Cu + 20um*80mm Li (Double Side, Central), L 1m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(4) 50um*80mm Li + 6um*100mm Cu + 50um*80mm Li (Double Side, Central), L 1m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(5) 50um*65mm Li + 8um*80mm Cu (Single Side, Central), L 14m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(6) 20um*90mm Li + 8um*120mm Cu + 20um*90mm Li (Double Side, Central), L 10m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(7) 50um*90mm Li + 6um*120mm Cu + 50um*90mm Li (Double Side, Central), L 8m\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOther customized sizes (eg: single\/double coating, coating width and thickness, and current collector thickness) can be supplied upon request.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.2px;\"\u003e\n\u003ctd style=\"width: 34.1558%; height: 55.2px;\"\u003e\u003cem\u003eSample Package\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.4487%; height: 55.2px;\"\u003e\n\u003cp\u003eThe lithium coated copper foil roll is sealed in an aluminum can that is further sealed in a vacuum bag.    \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 74.8px;\"\u003e\n\u003ctd style=\"width: 34.1558%; height: 74.8px;\"\u003e\u003cem\u003eAttention\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.4487%; height: 74.8px;\"\u003e\n\u003cp\u003eThe aluminum can with lithium coated copper foil roll must be opened inside a glove box with Argon Gas and moisture less than 1%RH (0.1 ppm is better).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/smll.201905620\"\u003eS. Cui, et al. Large-Scale Modification of Commercial Copper Foil with Lithiophilic Metal Layer for Li Metal Battery, Small, 2020, 16, 1905620\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acbfe6\/meta\"\u003eS. H. Yang, et al. Lithiation and Delithiation Behavior of Porous Li-Cu Anode in Li-ion Battery Systems, J. Electrochem. Soc., 2023, 170, 030516\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"20um*80mm Li + 6um*100mm Cu (Single Side\/Central) L1m","offer_id":46849722351846,"sku":"CLIBAELCLSST20W80","price":569.0,"currency_code":"USD","in_stock":true},{"title":"20um*80mm Li + 6um*100mm Cu + 20um*80mm Li (Double Side\/Central) L1m","offer_id":47757492617446,"sku":"CLIBAELCLDST20W80","price":659.0,"currency_code":"USD","in_stock":true},{"title":"50um*80mm Li + 6um*100mm Cu (Single Side\/Central) L1m","offer_id":46849734082790,"sku":"CLIBAELCLSST50W80","price":519.0,"currency_code":"USD","in_stock":true},{"title":"50um*80mm Li + 6um*100mm Cu + 50um*80mm Li (Double Side\/Central) L1m","offer_id":47757499039974,"sku":"CLIBAELCLDST50W80","price":619.0,"currency_code":"USD","in_stock":true},{"title":"50um*65mm Li + 8um*80mm Cu (Single Side\/Central) L14m","offer_id":47757501104358,"sku":"CLIBAELCLSST50W65","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"20um*90mm Li + 8um*120mm Cu + 20um*90mm Li (Double Side\/Central) L10m","offer_id":47757501137126,"sku":"CLIBAELCLDST20W90","price":2499.0,"currency_code":"USD","in_stock":true},{"title":"50um*90mm Li + 6um*120mm Cu + 50um*90mm Li (Double Side\/Central) L8m","offer_id":47757533708518,"sku":"CLIBAELCLDST50W90","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-LCLF-main.jpg?v=1762664571"},{"product_id":"clibabhc","title":"Biomass-Derived Hard Carbon Powder for Li-Ion Battery Anode, 100 g\/bottle, CLIBABHC","description":"\u003cp\u003eHard carbon is a non-graphitizable, amorphous material. Its structure is highly disordered and random, which creates larger interlayer spacing and internal micropores for ion-intercalation and migration.\u003c\/p\u003e\n\u003cp\u003eThe biomass-derived hard carbon (BHC) has been applied as lithium-ion battery anode due to its unique \"house of cards\" structure that can store lithium in two ways: (1) Intercalation (in its small graphitic regions); (2) Pore-filling (in its micropores). This dual-storage mechanism can lead to theoretical capacities higher than graphite's 372 mAh\/g. Some research has shown capacities over 600 mAh\/g.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 55.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCLIBABHC (C-LIB-A-BHC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD10 = 3.0 um;   \u003c\/span\u003e\u003cspan\u003eD50 = 4.7 um;   D90 = 7.5 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e1.12 \u003cspan\u003eg\/cm3\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e1.9 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e~360 mAh\/g\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-BHC-Charge-Dsicharge_160x160.jpg?v=1762767590\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e~82.0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the hard carbon powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/smll.201907602\" rel=\"noopener\" target=\"_blank\"\u003eY. Shen, et al. Chemically Prelithiated Hard-Carbon Anode for High Power and High Capacity Li-Ion Batteries, Small. 2020, 16, 1907602\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.9b21417\"\u003eX. Zhang, et al. Fast and Controllable Prelithiation of Hard Carbon Anodes for Lithium-Ion Batteries, ACS Applied Material Interfaces, 2020, 12, 11589–11599\u003c\/a\u003e. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Default Title","offer_id":46853180522726,"sku":"CLIBABHC","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBABHC.png?v=1763455032"},{"product_id":"csibahc","title":"Hard Carbon Powder for Na-Ion Battery Anode, 100-500 g\/bottle, CSIBAHC","description":"\u003cp\u003eHard carbon is a non-graphitizable, amorphous material. Its structure is highly disordered and random, which creates larger interlayer spacing and internal micropores for ion-intercalation and migration.\u003c\/p\u003e\n\u003cp\u003eThe sodium storage is described as the following three-step \"adsorption-intercalation-filling\" mechanism:\u003c\/p\u003e\n\u003cp\u003e(1) Adsorption (High Voltage): Sodium ions first attach (adsorb) to the surfaces and defect sites on the hard carbon particles.\u003c\/p\u003e\n\u003cp\u003e(2) Intercalation (Sloping Voltage): The ions then slide in between the disordered graphitic layers, similar to how lithium enters graphite but in a more chaotic environment.\u003c\/p\u003e\n\u003cp\u003e(3) Pore-Filling (Low Voltage): Finally, the ions cluster together and fill the material's internal nanopores. This step is responsible for a large portion of hard carbon's high capacity.\u003c\/p\u003e\n\u003cp\u003eTherefore, Hard carbon delivers a high reversible capacity, often in the range of 300-400 mAh\/g, which is even higher than graphite's theoretical capacity for lithium (372 mAh\/g).\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 55.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCSIBAHC (C-SIB-A-HC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eD50 = 7.1 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e\u003cspan\u003e0.88 g\/cm3\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e3.87 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e~298 mAh\/g\u003c\/p\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-HC-Charge-Dsicharge.jpg?v=1762794036\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-HC-Charge-Dsicharge_160x160.jpg?v=1762794036\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/a\u003e\u003cbr\u003e\n\u003cp\u003eElectrolyte: 1.0M NaClO4 in EC:DEC=1:1 vol% with 5%FEC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e~88%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eCycling Stability \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-HC-Cycling_Stability.jpg?v=1762794035\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-HC-Cycling_Stability_160x160.jpg?v=1762794035\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e100 g, 200 g, and 500 g\/bottle\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the hard carbon powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.8b00645\" target=\"_blank\"\u003eZ. Li, et al. Defective Hard Carbon Anode for Na-Ion Batteries, Chem. Mater., 2018, 30, 4536–4542\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2014\/ta\/c4ta02068e\/unauth\" rel=\"noopener\" target=\"_blank\"\u003eK. Hong, et al. Biomass derived hard carbon used as a high performance anode material for sodium ion batteries, J. Mater. Chem. A, 2014, 2, 12733-12738\u003c\/a\u003e. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"100 g","offer_id":47896557093094,"sku":"CSIBAHC100","price":89.0,"currency_code":"USD","in_stock":true},{"title":"200 g","offer_id":47896557125862,"sku":"CSIBAHC200","price":169.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47896557158630,"sku":"CSIBAHC500","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CSIBAHC.png?v=1763455169"},{"product_id":"csibakhc","title":"Kuraray Hard Carbon (Type 2) Powder for Na-Ion Battery Anode, 100 g\/bottle, CSIBAKHCT2","description":"\u003cp\u003eHard carbon is a non-graphitizable, amorphous material. Its structure is highly disordered and random, which creates larger interlayer spacing and internal micropores for ion-intercalation and migration.\u003c\/p\u003e\n\u003cp\u003eThe sodium storage is described as the following three-step \"adsorption-intercalation-filling\" mechanism:\u003c\/p\u003e\n\u003cp\u003e(1) Adsorption (High Voltage): Sodium ions first attach (adsorb) to the surfaces and defect sites on the hard carbon particles.\u003c\/p\u003e\n\u003cp\u003e(2) Intercalation (Sloping Voltage): The ions then slide in between the disordered graphitic layers, similar to how lithium enters graphite but in a more chaotic environment.\u003c\/p\u003e\n\u003cp\u003e(3) Pore-Filling (Low Voltage): Finally, the ions cluster together and fill the material's internal nanopores. This step is responsible for a large portion of hard carbon's high capacity.\u003c\/p\u003e\n\u003cp\u003eUnlike most hard carbons, which can be derived from petroleum coke or coal tar, Kuraray's hard carbon is manufactured from plant-based biomass, specifically coconut shells with features of eco-friendly and complex process. It has a wider interlayer spacing (the gaps between the carbon layers, noted as d002 \u0026gt; 0.38 nm) to host large sodium ion compared to the tight spacing in graphite.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 55.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCSIBAKHC (C-SIB-A-KHC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eD50 = 5.0 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e1.48 \u003cspan\u003eg\/cm3\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e6.0 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e~300 mAh\/g\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-KHC-Charge-Dsicharge_160x160.jpg?v=1762793019\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003eElectrolyte: 1.0 M NaPF6 in EC:DMC:EMC = 1:1:1 with 1.0wt% FEC.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e~89.3%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eCycling Stability \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-KHC-Cycling_Stability_160x160.jpg?v=1762793027\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the hard carbon powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.8b00645\" rel=\"noopener\" target=\"_blank\"\u003eZ. Li, et al. Defective Hard Carbon Anode for Na-Ion Batteries, Chem. Mater., 2018, 30, 4536–4542\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2014\/ta\/c4ta02068e\/unauth\" target=\"_blank\"\u003eK. Hong, et al. Biomass derived hard carbon used as a high performance anode material for sodium ion batteries, J. Mater. Chem. A, 2014, 2, 12733-12738\u003c\/a\u003e. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Default Title","offer_id":46853810749670,"sku":"CSIBAKHC","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CSIBAKHC.png?v=1763455283"},{"product_id":"csibasc","title":"Soft Carbon Powder for Na-Ion Battery Anode, 100-500 g\/bottle, CSIBASC","description":"\u003cp\u003eSoft carbon is a specific type of amorphous carbon used as an anode material, particularly in sodium-ion batteries (SIBs). Unlike hard carbon, which is \"non-graphitizable,\" soft carbon is \"graphitizable.\" This means that while it has a disordered structure, it will convert into ordered, crystalline graphite if heated to very high temperatures (e.g., above 2500°C). It is typically produced from precursors like petroleum coke or coal tar.\u003c\/p\u003e\n\u003cp\u003eSoft carbon normally has a unique \"turbostratic\" (disordered, layered) structure, like a messy and incomplete stack of paper. The layers are not perfectly aligned, creating more space than in graphite. When the battery is charged, sodium ions force their way between these disordered layers. This process expands the spacing between the carbon layers (e.g., from ~3.6 Å to ~4.2 Å). The \"electrochemically expandable\" structure enables the expansion is highly reversible. When the battery is discharged, the sodium ions exit, and the layers contract, allowing for a stable and long cycle life.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 552.8px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCSIBASC (C-SIB-A-SC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e D10 = 4.0 um,  \u003c\/span\u003e\u003cspan\u003eD50 = 8.5 um,  D90 = 16.0 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e\u003cspan\u003e0.8 g\/cm3\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e3.0 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 250.8px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 250.8px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 250.8px;\"\u003e\n\u003cp\u003e~300 mAh\/g\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-SC-Charge-Dsicharge_160x160.jpg?v=1762796635\"\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cp\u003eElectrolyte: 1.0M NaPF6 in EC:DEC: EMC=1:1:1 vol% with 1%FEC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e~84%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 172px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 172px;\"\u003e\u003cem\u003eCycling Stability \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 172px;\"\u003e\n\u003cp\u003e95% capacity retention after 500 cycles\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-SC-Cycling_Stability_160x160.jpg?v=1762796635\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e100 g, 200 g, and 500 g\/bottle\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the soft carbon powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.6b05474\" target=\"_blank\"\u003eZ. Jian, et al. Insights on the Mechanism of Na-Ion Storage in Soft Carbon Anode, Chem. Mater., 2017, 29, 2314–2320\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2211285524006281\" rel=\"noopener\" target=\"_blank\"\u003eW. Wu, et al. A soft carbon materials with engineered composition and microstructure for sodium battery anodes, Nano Energy, 2024, 128, 109880\u003c\/a\u003e. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"100 g","offer_id":47911421640934,"sku":"CSIBASC100","price":69.0,"currency_code":"USD","in_stock":true},{"title":"200 g","offer_id":47911421673702,"sku":"CSIBASC200","price":129.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47911421706470,"sku":"CSIBASC500","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CSIBASC.png?v=1763455389"},{"product_id":"czibaezc","title":"Zinc Chips (D=12.0 or 16.0 mm, T = 0.1 mm) as Anode Electrode for Zn-Ion Battery, 50 pcs\/bag, CZIBAEZC","description":"\u003cp\u003eZinc metal is a highly promising anode material for aqueous zinc-ion batteries (AZIBs). The round disc shape is suitable for coin cell assembly and testing in zinc-ion battery application. \u003c\/p\u003e\n\u003cp\u003eThe main features of ZIBs are shown below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eHigh Safety:\u003c\/b\u003e Zinc batteries often use water-based (aqueous) electrolytes, which are non-flammable. This is a major advantage over lithium-ion batteries, which use flammable organic electrolytes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eLow Cost \u0026amp; Abundance:\u003c\/b\u003e Zinc is an abundant, common, and inexpensive metal, making it much cheaper than lithium and cobalt.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh Capacity:\u003c\/b\u003e\u003cspan class=\"citation-15 citation-end-15\"\u003e Zinc has a high theoretical capacity, meaning it can store a good amount of energy.\u003csup data-turn-source-index=\"5\" class=\"superscript\"\u003e\u003c!----\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c!----\u003e\u003c!----\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEco-Friendly:\u003c\/b\u003e Zinc is less toxic and easier to recycle than the materials in many other batteries.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"100%\" style=\"width: 100.036%; height: 100.8px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCZIBAZC (C-ZIB-A-ZC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 10px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 10px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.99% for zinc content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 90.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 90.8px;\"\u003e\u003cem\u003eSample Dimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 90.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003eDiameter: 12.0 mm or 16.0 mm\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThickness: 0.1 mm (other thickness such as 0.2-1.0 mm are also available upon request)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.science.org\/doi\/full\/10.1126\/sciadv.adn2265\"\u003eS. Chen, et al. Ordered planar plating\/stripping enables deep cycling zinc metal batteries, Science Advances, 2024, 10, eadn2265\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2025\/ee\/d5ee05063d\"\u003eJ. F. Koons, et al. Resting but not idle: unveiling the mechanistic origin of resting losses for zinc anodes, 2025, 10.1039\/D5EE05063D6\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"12.0 mm","offer_id":46855962558694,"sku":"CZIBAEZC12","price":59.0,"currency_code":"USD","in_stock":true},{"title":"16.0 mm","offer_id":46855962591462,"sku":"CZIBAEZC16","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-ZIB-A-ZC-main.jpg?v=1762835776"},{"product_id":"czibaezfr","title":"Zinc Foil Roll (T=0.01-0.1 mm, W=100 mm, L=1000 mm) as Anode Electrode for Zn-Ion Battery, 1 m\/roll, CZIBAEZFR","description":"\u003cp\u003eZinc metal is a highly promising anode material for aqueous zinc-ion batteries (AZIBs). The foil shape is suitable as substrate for electrode preparation, as well as for pouch cell fabrication. \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100.036%; height: 100.8px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCZIBAEZFR (C-ZIB-AE-ZFR)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 10px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 10px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.99% for zinc content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 90.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 90.8px;\"\u003e\u003cem\u003eSample Dimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 90.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003eThickness: 0.01 mm and 0.1 mm (other thickness in the range of 0.01 to 1.0 mm are also available upon request)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWidth: 100 mm (other width of 150 mm is also available upon request)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLength: 1.0 m\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.science.org\/doi\/full\/10.1126\/sciadv.adn2265\"\u003eS. Chen, et al. Ordered planar plating\/stripping enables deep cycling zinc metal batteries, Science Advances, 2024, 10, eadn2265\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2025\/ee\/d5ee05063d\"\u003eJ. F. Koons, et al. Resting but not idle: unveiling the mechanistic origin of resting losses for zinc anodes, 2025, 10.1039\/D5EE05063D6\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"0.01 mm","offer_id":46856527020262,"sku":"CZIBAEZFR001","price":59.0,"currency_code":"USD","in_stock":true},{"title":"0.10 mm","offer_id":46856527053030,"sku":"CZIBAZFR005","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-ZIB-A-ZF-main.jpg?v=1762838714"},{"product_id":"czibaezfs","title":"Zinc Foam Sheet (T=0.5 or 1.0 mm, 100*100 mm) as Anode Electrode for Zn-Ion Battery, 1 pcs\/pack, CZIBAEZFS","description":"\u003cp\u003eZinc metal is a highly promising anode material for aqueous zinc-ion batteries (AZIBs). The 3D foam has a \"sponge-like\" structure with interconnected pores, which provide advantages of stable structure, high surface area, and dendrite suppression for delivering excellent battery performance. \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100.036%; height: 100.8px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCZIBAEZFS (C-ZIB-AE-ZFS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 10px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 10px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.99% for zinc content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 90.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 90.8px;\"\u003e\u003cem\u003eSample Dimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 90.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003eThickness: 0.5 mm and 1.0 mm (other thickness 1.5 and 2.0 mm are also available upon request)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLength\/Width: 100*100 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eSurface Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003e350±25 g\/m2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePore Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003e100 PPI\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2020\/ta\/d0ta02791j\/unauth\"\u003eY. Zhou, et al. 3D confined zinc plating\/stripping with high discharge depth and excellent high-rate reversibility, J. Mater. Chem. A, 2020, 8, 11719-11727\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S1385894724058844?casa_token=j5Ad4dr57Q4AAAAA:Sd5C-n0BvTUt_fHeUQT0tYDpuUMmaDIriPI5YQI5nab3F8smCwb5p737IL_GHJmpqkTxOCowwQ\"\u003eX. Wu, et al. Dual plating zinc foam of three-dimensional reconstruction as a high-flux and stable zinc metal anode for aqueous zinc-ion batteries, Chem. Engineering J 2024, 497,154395\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"L100*W100*T0.5 mm","offer_id":46857623306470,"sku":"CZIBAEZFS05","price":149.0,"currency_code":"USD","in_stock":true},{"title":"L100*W100*T1.0 mm","offer_id":46857706307814,"sku":"CZIBAEZFS10","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-ZIB-A-ZFS-main.jpg?v=1762886317"},{"product_id":"czibaezcc","title":"Single-Side Zinc Coated Electrode Sheet (100*100 mm) for Aqueous Zn-Ion Battery Anode, 5 pcs\/pack, CZIBAEZCC","description":"\u003cp\u003eThis is a composite electrode where the active zinc material is deposited onto a carbon-coated copper foil current collector. This structure is designed to solve the \"dendrite problem\" that often kills standard zinc batteries\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100.036%; height: 100.8px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCZIBAZCC (C-ZIB-A-ZCC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 10px;\"\u003e\u003cem\u003eCurrent Collector\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 10px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCarbon-coated copper foil (9 um copper foil + 1 um carbon coating layer)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eCoating Material\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eZinc powder as active material\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 90.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 90.8px;\"\u003e\u003cem\u003eSample Dimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 90.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003eTotal thickness: 11 um (zinc coating layer thickness is 1 um, current collector thickness is 10 um)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLength\/Width: 100*100 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eCoating Layer Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003e15 mg\/cm2 (other loading density can be customized upon request, but minimal order is 5 packs)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eCompaction Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003e3.0 g\/cm3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/aenm.202003931\"\u003eQ. Li, et al. Calendar Life of Zn Batteries Based on Zn Anode with Zn Powder\/Current Collector Structure, Adv. Energy Mater., 2021, 11, 2003931\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/adfm.202400839\"\u003eG. Weng, et al. Critical Criteria Depicting the Rational Design of Zn Anode Current Collector, Adv. Funct. Mater., 2024, 34, 2400839\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Default Title","offer_id":46858728800486,"sku":"CZIBAEZCC","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-ZIB-A-ZnCCu-main.jpg?v=1762929089"},{"product_id":"cmibame","title":"Magnesium Electrodes (Disc, Sheet, Roll) with A Thickness of 0.05-0.1 mm for Mg-Ion Battery Anode, CMIBAME","description":"\u003cp\u003eMagnesium metal is a highly promising anode material for magnesium-ion batteries (MIBs). The round disc shape is suitable for coin cell assembly and testing in magnesium-ion battery application (especially for CR20XX coin cell), while the sheet and roll shape are more suitable for pouch and cylindrical cells. \u003c\/p\u003e\n\u003cp\u003eThe main features of MIBs are shown below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe \"Divalent\" character enable one magnesium ion (Mg2+) carries two electrons, whereas lithium ion (Li+) only carries one. Theoretically, this allows for very high volumetric energy density.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDendrite-Free (mostly): Unlike lithium and zinc, magnesium tends to deposit much more smoothly during charging. It is naturally resistant to forming dendrites, which makes it inherently safer.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAbundance: Magnesium is the 8th most abundant element in the Earth's crust, making it significantly cheaper and more sustainable than lithium\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable style=\"width: 100.036%; height: 100.8px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCMIBAME (C-MIB-A-ME)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 10px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 10px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.99% for magnesium content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 90.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 90.8px;\"\u003e\u003cem\u003eElectrode Dimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 90.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003eThe thickness for all the three shapes is 0.05 or 0.1 mm \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRound disc: Diameter: 10\/12\/14\/16 mm, T=0.05 mm (50 pcs\/pack)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRectangle Sheet: T0.05 * W100 * L100 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRoll: T0.1* W100 * L1000 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsenergylett.1c01243\"\u003eY. Zhao, et al. A Bismuth-Based Protective Layer for Magnesium Metal Anode in Noncorrosive Electrolytes, ACS Energy Lett., 2021, 6, 2594–2601\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/adma.201904987\"\u003eK. Tang, et al. A Stable Solid Electrolyte Interphase for Magnesium Metal Anode Evolved from a Bulky Anion Lithium Salt, Adv. Mater., 2020, 32,1904987\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Disc","offer_id":46858883891430,"sku":"CMIBAMED","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Sheet","offer_id":46858883924198,"sku":"CMIBAMES","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Roll","offer_id":46862103478502,"sku":"CMIBAMER","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-ZIB-A-ZC-main.jpg?v=1762835776"},{"product_id":"caibae","title":"Aluminum Electrodes (Disc, Sheet, Roll) with A Thickness of 0.1 mm for Al-Ion Battery Anode, CAIBAE","description":"\u003cp\u003eAluminum metal is a highly promising anode material for aluminum-ion batteries (AIBs). The round disc shape is suitable for coin cell assembly and testing in aluminum-ion battery application (especially for CR20XX coin cell), while the sheet or roll shapes can be used for pouch cells. \u003c\/p\u003e\n\u003cp\u003eThe main features of AIBs are shown below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe \"Trivalent\" character enable one aluminum ion (Al3+) carries three electrons, whereas lithium ion (Li+) only carries one. Theoretically, this allows for very high volumetric energy density (theoretical 8000 mAh\/cm3).\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIt is the most abundant metal in the Earth's crust, making it far cheaper and more sustainable than lithium or copper.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable style=\"width: 100.036%; height: 100.8px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eCAIBAE (C-AIB-AE)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 10px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 10px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.99% for aluminum content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 90.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 90.8px;\"\u003e\u003cem\u003eElectrode Dimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 90.8px;\"\u003e\n\u003cp\u003eThe thickness for both disc and sheet is 0.1 mm (other thickness in the range of 0.01 to 0.3 mm is available upon request).\u003c\/p\u003e\n\u003cp\u003eRound disk D15 mm (50 pcs\/pack)\u003c\/p\u003e\n\u003cp\u003eRectangle sheet: 100 *100 mm (5 pcs\/pack) \u003c\/p\u003e\n\u003cp\u003eRoll: W100 mm * L1 m \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.nanolett.2c05077\"\u003eY. Meng, et al. Reversible, Dendrite-Free, High-Capacity Aluminum Metal Anode Enabled by Aluminophilic Interface Layer, Nano Letter, 2023, 23, 2295–2303\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/jacs.2c04820\"\u003eC. Yan, et al. Reversible Al Metal Anodes Enabled by Amorphization for Aqueous Aluminum Batteries, J. Am. Chem. Soc., 2022, 144, 11444–11455\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Disc","offer_id":46860047384806,"sku":"CAIBAEAD","price":49.0,"currency_code":"USD","in_stock":true},{"title":"Sheet","offer_id":46862051115238,"sku":"CAIBAEAS","price":49.0,"currency_code":"USD","in_stock":true},{"title":"Roll","offer_id":46873085772006,"sku":"CAIBAEAR","price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-ZIB-A-ZC-main.jpg?v=1762835776"},{"product_id":"csibaesc","title":"Sodium Chips (D=8-18 mm, T = 0.45 mm) for Li-Ion Battery Anode, 100 pcs\/bottle, CSIBAESC","description":"\u003cp\u003eSodium metal has been demonstrated as promising anode material with high energy density for sodium-ion battery. The chip shape is good for coin cell assembling and testing.\u003c\/p\u003e\n\u003cp\u003eThe main features and applications are shown below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eHalf-Cell Testing:\u003c\/b\u003e Researchers use them as a counter-electrode to test the performance of new \u003cb\u003ecathode\u003c\/b\u003e materials (like Prussian Blue analogues or layered oxides) without the interference of a complex anode.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eSodium Metal Batteries (SMBs):\u003c\/b\u003e Development of high-energy-density batteries that use a pure metal anode instead of an intercalation material (like carbon).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eAnode-Free Prototypes:\u003c\/b\u003e Testing concepts where the sodium is plated directly onto a current collector during charging.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the sodium chips, there are two kinds of sodium chips, (1) one is pure sodium where both side is covered by the transparent protection membrane; (2) the other type has aluminum support, in which aluminum side is covered by a blue protection membrane and sodium side is covered by a transparent protection membrane.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable style=\"width: 100.036%; height: 246.475px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCSIBAESC (C-SIB-AE-SC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 45.275px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 45.275px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 45.275px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.9% for Sodium content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eSodium Chip Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003eD=8, 10, 12, 14, 15.6, and 18 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eT=0.45 mm (other chip thicknesses, such as \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e0.05, 0.1, 0.2, 0.3, 0.5, 0.6, 0.7, and 0.8 mm\u003c\/span\u003e can be supplied upon request)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.621%;\"\u003e\u003cem\u003eChip Support\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%;\"\u003e\n\u003cp\u003e\u003cspan\u003ePure or Al support\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003eBottle Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e~100 pcs\/bottle\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 55.2px;\"\u003e\u003cem\u003eSample Package\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 55.2px;\"\u003e\n\u003cp\u003eThe sodium chips with or without aluminum support are firstly sealed in plastic container and further vacuum sealed in a aluminum-laminated bag. Finally, it was placed in a black container for safety transport. \u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-SC-03-main_160x160.jpg?v=1763055774\" width=\"233\" height=\"48\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 74.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 74.8px;\"\u003e\u003cem\u003eAttention\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 74.8px;\"\u003e\n\u003cp\u003eThe whole package with sodium chips should be opened and operated inside a glove box with Argon Gas and moisture less than 1%RH (0.1 ppm is better).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlehtml\/2023\/ee\/d2ee02606f\"\u003eC. Gong, et al. The role of an elastic interphase in suppressing gas evolution and promoting uniform electroplating in sodium metal anodes, Energy Environ. Sci., 2023, 16, 535-545\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.0161914jes\/meta\"\u003eR. Rupp, et al. On the Reliability of Sodium Metal Anodes: The Influence of Neglected Parameters, J. Electrochem. Soc., 2019, 166, A3122\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"D= 8mm \u0026 T0.45mm (Pure)","offer_id":46864925065446,"sku":"CSIBAESCD8T045","price":119.0,"currency_code":"USD","in_stock":true},{"title":"D= 10mm \u0026 T0.45mm (Pure)","offer_id":47719476789478,"sku":"CSIBAESCD10T045","price":129.0,"currency_code":"USD","in_stock":true},{"title":"D=12mm \u0026 T0.45 mm (Pure)","offer_id":47719476822246,"sku":"CSIBAESCD12T045","price":129.0,"currency_code":"USD","in_stock":true},{"title":"D=14mm \u0026 T0.45 mm (Pure)","offer_id":47719476855014,"sku":"CSIBAESCD14T045","price":129.0,"currency_code":"USD","in_stock":true},{"title":"D=15.6mm \u0026 T0.45 mm (Pure)","offer_id":47719476887782,"sku":"CSIBAESCD156T045","price":149.0,"currency_code":"USD","in_stock":true},{"title":"D=15.6mm \u0026 T0.45 mm (Al Support)","offer_id":46864925098214,"sku":"CSIBAESCAlD156T045","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-SC-main.jpg?v=1763096625"},{"product_id":"csibaesf","title":"Sodium Foil (W= 80 mm, T = 0.45 mm, L = 350 mm) as Anode Electrode for Sodium-Ion Battery, CSIBAESF","description":"\u003cp\u003eSodium metal has been demonstrated as promising anode material with high energy density for sodium-ion battery. \u003c\/p\u003e\n\u003cp\u003eThe main features and applications are shown below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eHalf-Cell Testing:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eResearchers use them as a counter-electrode to test the performance of new\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ecathode\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ematerials (like Prussian Blue analogues or layered oxides) without the interference of a complex anode.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eSodium Metal Batteries (SMBs):\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eDevelopment of high-energy-density batteries that use a pure metal anode instead of an intercalation material (like carbon).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eAnode-Free Prototypes:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eTesting concepts where the sodium is plated directly onto a current collector during charging.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the sodium foil, which not only can be used for cutting into disc for coin-cell application, but also can be used as anode electrode for pouch cell assembling and testing. There are two kinds of sodium foils, (1) one is pure sodium foil where both side is covered by the transparent protection membrane; (2) the other type has aluminum support, in which aluminum side is covered by a blue protection membrane and sodium side is covered by a transparent protection membrane.\u003c\/p\u003e\n\u003ctable style=\"width: 100.036%; height: 237.6px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCSIBAESF (C-SIB-AE-SF)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 35.6px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e99.9% for sodium content\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 36.4px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 36.4px;\"\u003e\u003cem\u003eSample Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 36.4px;\"\u003e\n\u003cp\u003e\u003cspan\u003e1 roll\/pack. Each roll is L350 mm*W80mm*T0.45mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eType 1: Pure sodium foil (0.45 mm thickness)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eType 2: Composite sodium foil with aluminum support (450 mm thickness for sodium and 30 um thickness for Al)\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.2px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 55.2px;\"\u003e\u003cem\u003eSample Package\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 55.2px;\"\u003e\n\u003cp\u003eSodium foil with or without aluminum support are firstly sealed in plastic container and further vacuum sealed in a aluminum-laminated bag. Finally, it was placed in a black container for safety transport.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-SIB-A-SC-03-main_160x160.jpg?v=1763055774\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 74.8px;\"\u003e\n\u003ctd style=\"width: 33.621%; height: 74.8px;\"\u003e\u003cem\u003eAttention\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 65.9835%; height: 74.8px;\"\u003e\n\u003cp\u003eThe sodium foil roll must be opened and operated inside a glove box with Argon Gas and moisture less than 1%RH (0.1 ppm is better).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlehtml\/2023\/ee\/d2ee02606f\"\u003eC. Gong, et al. The role of an elastic interphase in suppressing gas evolution and promoting uniform electroplating in sodium metal anodes, Energy Environ. Sci., 2023, 16, 535-545\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.0161914jes\/meta\"\u003eR. Rupp, et al. On the Reliability of Sodium Metal Anodes: The Influence of Neglected Parameters, J. Electrochem. Soc., 2019, 166, A3122\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Echem Supplies","offers":[{"title":"Pure Sodium Foil","offer_id":46863542747366,"sku":"CSIBAESF","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Sodium Foil with AI Support","offer_id":46863542780134,"sku":"CSIBAESFAI","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/C-LIB-A-LF-main.jpg?v=1762663720"},{"product_id":"cbaaifs","title":"Indium (In) Foil Sheet (T 0.02-0.1 mm, L 100mm * W 100mm) for Fabricating Battery Anode Li-In Alloy, CBAAIFS","description":"\u003cp\u003eIndium foil undergoes a lithiation process to form a Lithium-Indium (Li-In) alloy, which is preferred over pure lithium for several critical reasons:\u003c\/p\u003e\n\u003cp\u003e(1)\u003cstrong\u003e Stable Redox Plateau\u003c\/strong\u003e: The Li-In alloy operates at a very stable potential of approximately 0.62 V vs Li\/Li+. This makes it an ideal reference electrode for testing new solid electrolytes.\u003c\/p\u003e\n\u003cp\u003e(2) \u003cstrong\u003eFast Kinetics\u003c\/strong\u003e: Indium has an exceptionally low migration energy barrier. The lithium diffusion coefficient in the LiIn phase is roughly 5.5 * 10^(-7) cm^2\/s, which is significantly faster than many other alloys, enabling fast charging (some research shows 5-minute charge cycles).\u003c\/p\u003e\n\u003cp\u003e(3) \u003cstrong\u003eDendrite Suppression\u003c\/strong\u003e: Pure lithium tends to form \"fingers\" (dendrites) that pierce solid electrolytes and cause shorts. Indium alloys promote uniform deposition and have a \"self-healing\" mechanical softness that maintains contact with the electrolyte.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 242.438px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 45.2125px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 45.2125px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 45.2125px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCBAAIFS (C-BAA-IFS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 40.05px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 40.05px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 40.05px;\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026gt;99.99%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 157.175px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 157.175px;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 157.175px;\"\u003e\n\u003cp\u003e(1) T 0.02mm * W 100mm * L 100mm\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e(2) T 0.05mm * W 100mm * L 100mm\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e(3) T 0.10mm * W 100mm * L 100mm\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eOther sheet dimensions can also be supplied upon request. \u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"WDKYJS","offers":[{"title":"T 0.02mm * W 100mm * L 100mm","offer_id":47233284341990,"sku":"CBAAIFST002","price":59.0,"currency_code":"USD","in_stock":true},{"title":"T 0.05mm * W 100mm * L 100mm","offer_id":47233284440294,"sku":"CBAAIFST005","price":59.0,"currency_code":"USD","in_stock":true},{"title":"T 0.10mm * W 100mm * L 100mm","offer_id":47233284473062,"sku":"CBAAIFST010","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CBAAIFS.png?v=1767052805"},{"product_id":"clibahtdg","title":"High Tap Density Graphite Powder for Li-Ion Battery Anode, 100-500 g\/bottle, CLIBAHTDG","description":"\u003cp\u003eHigh-tap-density graphite is essential for maximizing the volumetric energy density of lithium-ion batteries. In industrial production, achieving high tap density (typically \u0026gt;1.0 g\/cm^3) involves specific material selection and particle engineering. The tap density of graphite powder is primarily a function of particle morphology and size distribution.\u003c\/p\u003e\n\u003cp\u003e(1) \u003cstrong\u003eSpheronization\u003c\/strong\u003e: Natural flake graphite is mechanically \"rounded\" into potato-like spheres. This reduces the specific surface area and allows particles to pack more tightly. Rounded natural graphite can reach tap densities near 1.0 g\/cm^3 compared to \u0026lt;0.5 g\/cm^3 for raw flakes.\u003c\/p\u003e\n\u003cp\u003e(2) \u003cstrong\u003eSecondary Particle Granulation\u003c\/strong\u003e: Small synthetic graphite grains are often clustered into larger, denser secondary particles. This \"cluster\" approach mimics the benefits of spherical shapes while maintaining the structural stability of synthetic graphite.\u003c\/p\u003e\n\u003cp\u003e(3) \u003cstrong\u003eParticle Size Distribution (PSD) Tuning\u003c\/strong\u003e: A bimodal or multimodal distribution (mixing larger and smaller particles) increases density. The smaller \"fine\" particles fill the interstitial voids between the larger \"coarse\" particles, reducing the overall volume occupied by the powder.\u003c\/p\u003e\n\u003cp\u003e(4) \u003cstrong\u003ePitch Coating\u003c\/strong\u003e: Coating spherical graphite with a thin layer of amorphous carbon (from coal tar or petroleum pitch) smoothens the particle surface, further increasing tap density and improving electrolyte compatibility.\u003c\/p\u003e\n\u003ctable style=\"width: 100.036%; height: 443.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 29.2752%; height: 19.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 70.509%; height: 19.6px;\"\u003eCLIBAHTDG (C-LIB-A-HTDG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 142px;\"\u003e\n\u003ctd style=\"width: 29.2752%; height: 142px;\"\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 70.509%; height: 142px;\"\u003e\n\u003cp\u003eD10 = 6.55 um, D50 = 14.63 um, D90 = 28.85 um\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAHTDG_PSD_160x160.png?v=1769930765\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 29.2752%; height: 19.6px;\"\u003eTap Density\u003c\/td\u003e\n\u003ctd style=\"width: 70.509%; height: 19.6px;\"\u003e1.10 g\/cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 29.2752%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Area Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 70.509%; height: 19.6px;\"\u003e1.65 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 29.2752%; height: 19.6px;\"\u003e\u003cem\u003eWater Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 70.509%; height: 19.6px;\"\u003e\u0026lt;0.07 wt%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 183.6px;\"\u003e\n\u003ctd style=\"width: 29.2752%; height: 183.6px;\"\u003e\u003cem\u003eFirst Discharge Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 70.509%; height: 183.6px;\"\u003e\n\u003cp\u003e358.4 mAh\/g \u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAHTDG_Charging_Test_160x160.png?v=1769930763\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003eAnode recipe: Graphite: SP : SBR: CMC = 91: 5: 2.4: 1.6 \u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003eElectrolyte: 1M LiPF6 in EC\/EMC (1:1)\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003eDischarge: 0.1C to 0.001 V\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003eCharging: 0.1C to 2 V (cut off current 0.01C)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 29.2752%; height: 19.6px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 70.509%; height: 19.6px;\"\u003e93.2% \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 29.2752%; height: 19.6px;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 70.509%; height: 19.6px;\"\u003e\n\u003cspan\u003e100 g, 200 g, and 500 g\/bottle (a \u003c\/span\u003e\u003cstrong\u003elarger quantity can be supplied upon request\u003c\/strong\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the high tap density graphite powder in a dry area (glovebox is preferred); (2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S1872580521600513\"\u003eJ. P. Zhang, et al. A wet granulation method to prepare graphite particles with a high tap density for high volumetric energy density lithium-ion storage, New Carbon Materials, 2022, 37, 402-410\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0013468615006192\"\u003eH. Han, et al. Microstructure control of the graphite anode with a high density for Li ion batteries with high energy density, Electrochimica Acta, 2015, 166, 367-371\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"100 g","offer_id":47913277784294,"sku":"CLIBAHTDG100","price":69.0,"currency_code":"USD","in_stock":true},{"title":"200 g","offer_id":47913277817062,"sku":"CLIBAHTDG200","price":119.0,"currency_code":"USD","in_stock":true},{"title":"500 g","offer_id":47913277849830,"sku":"CLIBAHTDG500","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CLIBAHTDG_main.png?v=1769929913"},{"product_id":"csibakhct1","title":"Kuraray Hard Carbon (Type 1) Powder for Na-Ion Battery Anode, 100 g\/bottle, CSIBAKHCT1","description":"\u003cp\u003eKURANODE™ Type 1 is Kuraray's high-capacity, plant-based (renewable precursor) hard carbon anode material designed for secondary batteries. While traditionally utilized to boost power, life, and low-temperature performance in Lithium-ion batteries (LIBs) and Lithium-ion capacitors (LICs), its specific physical properties make it an exceptionally strong candidate for Sodium-ion batteries (SIBs) and emerging solid-state architectures.\u003c\/p\u003e\n\u003cp\u003eKuraray segments the KURANODE line into Type 1 (focused on maximizing reversible capacity) and Type 2 (focused on optimized particle sizing, faster kinetics, and ultra-high moisture resistance).  \u003c\/p\u003e\n\u003cp\u003eThe performance profile of Type 1 is dictated by its distinct, isotropic disordered structure, which follows the classic \"falling cards\" or house-of-cards model: (1) \u003cstrong\u003eDual-Mechanism Storage\u003c\/strong\u003e: Thanks to its structure, it utilizes a two-step insertion mechanism: intercalation between the wide graphene layers (\u0026gt;0.380 nm spacing) at higher potentials, followed by adsorption\/condensation into internal isolated nanopores (cavities) near 0 V. (2) \u003cstrong\u003eHigh-Capacity Design\u003c\/strong\u003e: Type 1 optimizes the ratio of these internal cavities and graphene edges to push the reversible capacity past 400 mAh\/g under slow C-rates without triggering dangerous metallic plating. (3) \u003cstrong\u003eStructural Stability\u003c\/strong\u003e: Because ion storage relies heavily on filling internal nanopores and sliding into wide layers, the macroscopic lattice expansion during cycling is significantly lower than that of graphite. This isotropic nature translates to excellent cycle life and minimal electrode breathing.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 357.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCSIBAKHCT1 (C-SIB-A-KHCT1)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eD50 = 9.0 um\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CSIBAKHCT1_PSD_160x160.png?v=1780036694\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e1.48 \u003cspan\u003eg\/cm3\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 10px;\"\u003e\u003cem\u003eD002\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 10px;\"\u003e0.38 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e4.0 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 217.2px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 217.2px;\"\u003e\u003cem\u003eCell Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 217.2px;\"\u003e\n\u003cp\u003eCharge: ~460 mAh\/g\u003c\/p\u003e\n\u003cp\u003eDischarge: 405 mAh\/g\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CSIBAKHCT1_Electrochemical_Test_100x100.png?v=1780036694\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003eElectrolyte: 1.0 M LiClO4 in PC:DME = 1:1 (vol), half cell, 96% active portion in electrode\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 19.6px;\"\u003e\u003cem\u003eFirst Columbic Efficiency\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 19.6px;\"\u003e~88.0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the hard carbon powder in a dry area (glovebox is preferred); \u003c\/span\u003e\u003cspan\u003e(2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca rel=\"noopener\" href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.8b00645\" target=\"_blank\"\u003eZ. Li, et al. Defective Hard Carbon Anode for Na-Ion Batteries, Chem. Mater., 2018, 30, 4536–4542\u003c\/a\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2014\/ta\/c4ta02068e\/unauth\" rel=\"noopener\" target=\"_blank\"\u003eK. Hong, et al. Biomass derived hard carbon used as a high performance anode material for sodium ion batteries, J. Mater. Chem. A, 2014, 2, 12733-12738\u003c\/a\u003e.  \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ASM","offers":[{"title":"Default Title","offer_id":47723652120806,"sku":"CSIBAKHCT1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CSIBAKHCT1_main.png?v=1780036696"},{"product_id":"casibantp","title":"NaTiPO4 (NTP) Powder for Aqueous Na-Ion Battery Anode, 20 g\/bottle, CASIBANTP","description":"\u003cp\u003eNaTi2(PO4)3 (NTP)—often written broadly as NaTiPO4 when discussing its generic polyanionic titanium phosphate framework—is one of the premier anode (negative electrode) materials for sodium-ion batteries, particularly celebrated for its exceptional performance in aqueous sodium-ion batteries (ASIBs).\u003c\/p\u003e\n\u003cp\u003eNaTi2(PO4)3 crystallizes into a rhombohedral structure (space group R3c). (1) \u003cstrong\u003eStructural Cage\u003c\/strong\u003e: The skeleton of the material is built from corner-sharing [TiO6] octahedra and [PO4] tetrahedra. Each [TiO6] unit is linked to six [PO4] units, creating an open, robust 3D interconnected network. (2) \u003cstrong\u003eLarge Diffusion Tunnels\u003c\/strong\u003e: This open framing hosts large interstitial cavities (specifically the Na(1) and {Na(2) sites) that act as wide highways for Na+ ions. The activation energy for sodium migration through these tunnels is exceptionally low, enabling rapid ion intercalation and deintercalation. (3) \u003cstrong\u003eZero-Strain Intercalation\u003c\/strong\u003e: Because the covalent polyanionic framework is remarkably rigid, the total volume change during complete sodiation\/desodiation is \u0026lt; 1%. This \"zero-strain\" nature prevents structural collapse, particle pulverization, and mechanical peeling over thousands of cycles.\u003c\/p\u003e\n\u003cp\u003eIn an aqueous (water-based) electrolyte, the thermodynamic stability window of water is narrow (1.23 V, though practically extended to ~1.5 V - 2.0 V due to overpotentials). If an anode's operating voltage is too low (like graphite or metallic sodium at ~0 V), it will trigger severe hydrogen evolution reactions (HER), decomposing the water, building up gas pressure, and destroying the cell. At ~ 0.4 V vs. Standard Hydrogen Electrode (SHE) (which equates to its position in aqueous testing), NTP sits perfectly within the stable electrochemical window of water, effectively suppressing hydrogen gas generation while maximizing the overall cell voltage.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 511.175px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 53.275px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 53.275px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 53.275px;\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eCASIBANTP (C-ASIB-A-NTP)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 38.2125px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 38.2125px;\"\u003e\u003cem\u003eChemical Formula\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 38.2125px;\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eNaTiPO4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003eChemical Composition\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eNa: 5.5 wt%  Ti: 22.6 wt%   PO4: 69.0 wt%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\n\u003cstrong\u003e \u003c\/strong\u003e\u003cem\u003eParticle Size Distribution\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eD10: 1.6 um,  D50 =4.8 um,  D90: 9.1 um \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 21.1375px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 21.1375px;\"\u003e\u003cem\u003eTap Density\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 21.1375px;\"\u003e1.50 g\/cm3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 23.6625px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 23.6625px;\"\u003e\u003cem\u003eSpecific Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 23.6625px;\"\u003e0.48 m2\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.6331%;\"\u003e\u003cem\u003epH\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%;\"\u003e10.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 56.663px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 56.663px;\"\u003e\u003cem\u003eXRD\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 56.663px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CASIBANTP_XRD_160x160.png?v=1782028272\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 201.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 201.6px;\"\u003e\u003cem\u003eFirst Discharging Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 201.6px;\"\u003e\n\u003cp\u003e~110 mAh\/g (0.1 C)\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CASIBANTP_Charge-Discharge_160x160.png?v=1782028272\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.6331%; height: 35.6px;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.0072%; height: 35.6px;\"\u003e\n\u003cp\u003e20 g\/bottle\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e: (1) Please store the NTP powder in a dry area (glovebox is preferred); (2) The battery powder is highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.2c00029\"\u003e\u003cspan\u003eS. Y. Louis, et al. Accurate Prediction of Voltage of Battery Electrode Materials Using Attention-Based Graph Neural Networks, ACS Appl. Mater. Interfaces 2022, 14, 23, 26587–26594\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2405829725001564\"\u003eC. Xu, et al. A novel KTP-type NaTiPO4F electrode material for high-performance Na-ion batteries, A novel KTP-type NaTiPO4F electrode material for high-performance Na-ion batteries, 2025, 76, 104156\u003c\/a\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"LNDC","offers":[{"title":"Default Title","offer_id":47906705047782,"sku":"CASIBANTP","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CASIBANTP_main.png?v=1782028272"},{"product_id":"cbaaii","title":"Indium (In) Ingots for Fabricating Battery Anode Li-In Alloy, 25-100 g\/pack, CBAAII","description":"\u003cp\u003eFor High-Temperature Metallurgical Melt Method to fabricate the Li-In alloy, an ingot is ideal because you can cleanly slice and weigh the target stoichiometric mass into a tantalum or molybdenum crucible before melting it with lithium at 350°C to 400°C. \u003c\/p\u003e\n\u003cp\u003eThe basic fabrication procedures are shown below: (1) \u003cstrong\u003eStoichiometric Calculation\u003c\/strong\u003e: Weigh high-purity lithium granules and indium ingots matching your exact targeted atomic ratio. For the standard reference phase (LiIn), use a strict 1:1 molar ratio (5.7 wt% Li and 94.3 wt In). (2) \u003cstrong\u003eCrucible Selection\u003c\/strong\u003e: Place the metals inside a tantalum, molybdenum, or glassy carbon crucible. \u003cem\u003eCritical Warning\u003c\/em\u003e: Do not use conventional quartz, alumina (Al2O3), or silica crucibles. Molten lithium is extremely corrosive and will violently reduce these materials at high temperatures, ruining both the sample and the vessel. (3) \u003cstrong\u003eThermal Profiling\u003c\/strong\u003e: Seal the crucible inside a quartz tube under a high-purity argon atmosphere or a high vacuum. Heat the mixture to 350°C to 400°C—well above the melting points of indium (156.6°C) and lithium (180.5°C). Hold at this plateau for 2 to 4 hours to ensure complete convective and diffusional mixing of the liquid phase. (4) \u003cstrong\u003eQuenching \u0026amp; Processing\u003c\/strong\u003e: Quench or furnace-cool the tube to room temperature. The resulting intermetallic compound is inherently brittle. Transfer it back into the glove box, where it can be easily crushed into a fine powder using a mortar and pestle or an agate ball mill. (5) \u003cstrong\u003eAnode Composite Compaction\u003c\/strong\u003e: Blend the synthesized Li-In alloy powder with the solid electrolyte powder (e.g., a 70:30 weight ratio of alloy to electrolyte) to extend the three-dimensional ionic\/electronic contact networks, then co-press it with the pure separator layer inside your testing die.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 85px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCBAAII (C-BAA-II)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 35.6px;\"\u003e\u003cem\u003eCAS\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e7440-74-6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 13.8px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 13.8px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 13.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026gt;99.995%\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCd≤ 5 ppm,  Cu≤ 3 ppm,  Al≤ 3 ppm,   Ti≤ 5 ppm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSn≤ 5 ppm,  Fe≤ 3 ppm,  Pb≤ 5 ppm, Pb≤ 3 ppm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.2374%;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%;\"\u003e\n\u003cp\u003e\u003cspan\u003e25 g, 50 g and 100 g\/pack\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SSDJSCL","offers":[{"title":"25 g","offer_id":47927116103910,"sku":"CBAAII25","price":79.0,"currency_code":"USD","in_stock":true},{"title":"50 g","offer_id":47927116005606,"sku":"CBAAII50","price":149.0,"currency_code":"USD","in_stock":true},{"title":"100 g","offer_id":47927116038374,"sku":"CBAAII100","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CBAAII_main.jpg?v=1782610836"},{"product_id":"cbaaig","title":"Indium (In) Granules for Fabricating Battery Anode Li-In Alloy, 25-100 g\/pack, CBAAIG","description":"\u003cp\u003eFor High-Temperature Metallurgical Melt Method to fabricate the Li-In alloy, an granule form is ideal because the user can cleanly slice and weigh the target stoichiometric mass into a tantalum or molybdenum crucible before melting it with lithium at 350°C to 400°C. \u003c\/p\u003e\n\u003cp\u003eThe basic fabrication procedures are shown below: (1) \u003cstrong\u003eStoichiometric Calculation\u003c\/strong\u003e: Weigh high-purity lithium granules and indium granules matching your exact targeted atomic ratio. For the standard reference phase (LiIn), use a strict 1:1 molar ratio (5.7 wt% Li and 94.3 wt In). (2) \u003cstrong\u003eCrucible Selection\u003c\/strong\u003e: Place the metals inside a tantalum, molybdenum, or glassy carbon crucible. \u003cem\u003eCritical Warning\u003c\/em\u003e: Do not use conventional quartz, alumina (Al2O3), or silica crucibles. Molten lithium is extremely corrosive and will violently reduce these materials at high temperatures, ruining both the sample and the vessel. (3) \u003cstrong\u003eThermal Profiling\u003c\/strong\u003e: Seal the crucible inside a quartz tube under a high-purity argon atmosphere or a high vacuum. Heat the mixture to 350°C to 400°C—well above the melting points of indium (156.6°C) and lithium (180.5°C). Hold at this plateau for 2 to 4 hours to ensure complete convective and diffusional mixing of the liquid phase. (4) \u003cstrong\u003eQuenching \u0026amp; Processing\u003c\/strong\u003e: Quench or furnace-cool the tube to room temperature. The resulting intermetallic compound is inherently brittle. Transfer it back into the glove box, where it can be easily crushed into a fine powder using a mortar and pestle or an agate ball mill. (5) \u003cstrong\u003eAnode Composite Compaction\u003c\/strong\u003e: Blend the synthesized Li-In alloy powder with the solid electrolyte powder (e.g., a 70:30 weight ratio of alloy to electrolyte) to extend the three-dimensional ionic\/electronic contact networks, then co-press it with the pure separator layer inside your testing die.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 85px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCBAAIG (C-BAA-IG)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 35.6px;\"\u003e\u003cem\u003eCAS\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003e7440-74-6\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 13.8px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 13.8px;\"\u003e\u003cem\u003ePurity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 13.8px;\"\u003e\n\u003cp\u003e\u003cspan\u003e\u0026gt;99.995%\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCd≤ 5 ppm,  Cu≤ 3 ppm,  Al≤ 3 ppm,   Ti≤ 5 ppm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSn≤ 5 ppm,  Fe≤ 3 ppm,  Pb≤ 5 ppm, Pb≤ 3 ppm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.2374%;\"\u003e\u003cem\u003ePackage Grade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%;\"\u003e\n\u003cp\u003e\u003cspan\u003e25 g, 50 g and 100 g\/pack\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SSDJSCL","offers":[{"title":"25 g","offer_id":47927117283558,"sku":"CBAAIG25","price":89.0,"currency_code":"USD","in_stock":true},{"title":"50 g","offer_id":47927117316326,"sku":"CBAAIG50","price":159.0,"currency_code":"USD","in_stock":true},{"title":"100 g","offer_id":47927117349094,"sku":"CBAAIG100","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CBAAIG_main.jpg?v=1782611825"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/Battery_Anode_Summary.jpg?v=1767592675","url":"https:\/\/echemsupplies.com\/collections\/anodes.oembed?page=2","provider":"EChem Supplies","version":"1.0","type":"link"}