{"title":"Battery Equipment","description":"\u003cp\u003e\u003cstrong\u003eBattery equipment is the physical apparatus a research or pilot-line program needs to take active materials, current collectors, and electrolytes through electrode fabrication, cell build, environmental control, and validation — and the choices you make in each station compound, because a defect introduced upstream is rarely correctable downstream.\u003c\/strong\u003e This collection groups the eight equipment families that span the full battery development workflow, in roughly the order a coupon or pilot cell moves through them.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/wet-electrode-fabrication\"\u003eWet Electrode Fabrication\u003c\/a\u003e\u003c\/strong\u003e — slurry mixers, tape casting coaters, calenders, and vacuum ovens for the solvent-cast route that still produces most lithium-ion, sodium-ion, and adjacent electrodes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/dry-electrode-fabrication\"\u003eDry Electrode Fabrication\u003c\/a\u003e\u003c\/strong\u003e — particle spheroidizers, dry mixers, asynchronous-speed presses, and laminators for the PTFE-fibrillated powder route that eliminates NMP recovery and enables thicker, higher-loading electrodes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/coin-cells-equipment\"\u003eCoin Cells\u003c\/a\u003e\u003c\/strong\u003e — disc cutters, electrolyte pipettes, and manual \/ pneumatic \/ electric crimpers for CR20XX, CR2450, and CR3032 assembly where burr-free geometry and uniform crimp pressure decide whether your cycling data is publishable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/pouch-cells-equipment\"\u003ePouch Cells\u003c\/a\u003e\u003c\/strong\u003e — slitters, sheet cutters, cup formers, Z-fold stackers, ultrasonic tab welders, heat sealers, vacuum sealers, and heat-press formation fixtures for laboratory and pilot-line pouch builds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/cylindrical-cells\"\u003eCylindrical Cells\u003c\/a\u003e\u003c\/strong\u003e — slitting and sheeting hardware plus semi-automatic and all-tab winders for 18650, 21700, 4680, and custom cylindrical formats where jelly-roll alignment sets cycle life.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/analyzers-and-testers\"\u003eAnalyzers \u0026amp; Testers\u003c\/a\u003e\u003c\/strong\u003e — cell-, module-, and pack-level cyclers, regenerative testers, constant-temperature and explosion-proof chambers, and integrated all-in-one stations for cycle-life and abuse validation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/controlled-atmosphere-systems\"\u003eControlled-Atmosphere Systems\u003c\/a\u003e\u003c\/strong\u003e — gloveboxes for sub-ppm O2\/H2O workstations and dryrooms for whole-line humidity control, the infrastructure tier that lithium-metal, sulfide solid-electrolyte, and LiPF6-based chemistries require.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/press-accessories\"\u003eAccessories\u003c\/a\u003e\u003c\/strong\u003e — milling jars and liners (zirconia, alumina, hardened stainless, agate), R2R unwind \/ rewind units, slot-die heads and adjustable doctor blades, and pouch \/ coin-cell fixtures with four-wire Kelvin contacts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are scoping a new battery lab from scratch, walk the list top-to-bottom: pick a fabrication route (wet or dry), the cell format you intend to publish in, the analyzer tier matched to that format, and finally the controlled-atmosphere envelope your chemistry demands. For the cell-internal materials these machines process, see \u003ca href=\"\/collections\/cathodes\"\u003eCathodes\u003c\/a\u003e, \u003ca href=\"\/collections\/anodes\"\u003eAnodes\u003c\/a\u003e, and \u003ca href=\"\/collections\/separators\"\u003eSeparators\u003c\/a\u003e; for the broader catalog, see \u003ca href=\"\/collections\/energy-storage\"\u003eEnergy Storage\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"esscceccp","title":"ECS-SS Electric Crimper with Controllable Pressure for Coin Cells- ESSCCECCP","description":"\u003cp\u003eAn electric coin cell crimper is a significant upgrade over manual hydraulic versions. It provides the consistent sealing pressure required to minimize contact resistance and prevent electrolyte leakage, which is especially critical when testing sensitive materials like MXenes or sulfur-based cathodes.\u003c\/p\u003e\n\u003cp\u003eElectric crimpers offer several technical benefits: (1) \u003cstrong\u003ePrecision Control\u003c\/strong\u003e: You can set the exact sealing pressure (typically in metric tons or psi). This ensures every cell in a test series is identical. (2) \u003cstrong\u003eGas-Tight Integrity\u003c\/strong\u003e: Consistent pressure ensures the gasket is deformed perfectly every time, which is vital for long-term cycling or high-temperature tests. (3) \u003cstrong\u003eErgonomics\u003c\/strong\u003e: In high-throughput labs, manual pumping leads to fatigue and inconsistent sealing toward the end of a batch. (4) \u003cstrong\u003eGlovebox Compatibility\u003c\/strong\u003e: Most electric models are designed with a compact footprint and remote control boxes to fit inside argon-filled gloveboxes without taking up excessive space.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSCCECCP (ESS-CC-ECCP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 360 W \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eThe electrical motor is compatible with Ar gas environment in glovebox\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCrimping Dies\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCell size range: φ5.0-φ35mm; Height: Max.10mm\u003c\/li\u003e\n\u003cli\u003eOne set of crimping die\u003ca href=\"http:\/\/www.mtixtl.com\/MSK-110DieSetReplacement-MSK-110-DS.aspx\"\u003e\u003c\/a\u003e for CR2032, CR2025, and CR2016 is included\u003c\/li\u003e\n\u003cli\u003eOptional die available from product option for crimping CR2325, CR2450, AG3, AG5. \u003c\/li\u003e\n\u003cli\u003eThe de-crimping dies, such as CR16, CR20, CR24, or CR30 is available upon request\u003c\/li\u003e\n\u003cli\u003eCoin cell crimping sequence:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/MSK-110-A-Positive_Assembling_Sequence_160x160.jpg?v=1737414414\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable pressure in touch screen.\u003c\/li\u003e\n\u003cli\u003eMax. 1000 kgf (recommend value is 500-700 kgf)\u003c\/li\u003e\n\u003cli\u003ePressure sensor resolution: ±0.5％ F.S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eCrimping Efficiency\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~2.5 pcs\/min (only for reference)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance during Crimping\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL300*W220*H470mm (antechamber compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~32 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eTo maintain the precision of an electric crimper:\u003c\/p\u003e\n\u003cp\u003e(1) \u003cstrong\u003eDie Cleaning\u003c\/strong\u003e: Electrolyte salts (especially LiPF6) are corrosive. If a cell leaks during crimping, the die must be cleaned immediately with ethanol or DI water to prevent pitting.\u003c\/p\u003e\n\u003cp\u003e(2) \u003cstrong\u003eCalibration\u003c\/strong\u003e: Periodically check the pressure sensor against a calibrated load cell to ensure the \"set\" pressure matches the \"actual\" force applied.\u003c\/p\u003e\n\u003cp\u003e(3) \u003cstrong\u003eGasket Alignment\u003c\/strong\u003e: Ensure the coin cell \"cup\" is centered in the die. Off-center crimping is the #1 cause of short circuits in newly assembled cells.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/app.jove.com\/t\/4104\/construction-and-testing-of-coin-cells-of-lithium-ion-batteries\"\u003eA. Kayyar, et al., Construction and Testing of Coin Cells of Lithium Ion Batteries, JOVE, DOI: 10.3791\/4104\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/11106.1629ecst\/meta\"\u003eK. S. Jiang, et al., How reliable is coin-cell-based ranking of Li anode Coulombic efficiency?, Joule, 2025, 9, 101963\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47488636584166,"sku":"ESSCCECCP","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCECCP_main_02.png?v=1776020016"},{"product_id":"esshsdspvsm","title":"ECS-SS High-Speed (1500 rpm) Dual-Shaft Planetary Vacuum Slurry Mixer (50-1000 mL)- ESSHSDSPVSM","description":"\u003cp\u003eFor battery research and electrode preparation, selecting a high-speed vacuum slurry mixer is essential to achieve a homogeneous, agglomerate-free paste. Most lab-scale planetary mixers for this application offer speeds up to 1,500 RPM, which is critical for dispersing binders and active materials without introducing air bubbles.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable style=\"height: 616px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSHSDSPVSM (ESS-HSDSPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1300 W \u003c\/li\u003e\n\u003cli\u003eA 2000W transformer can be used for AC110V operation \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eStirring Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRotation Speed: 0-1500 rpm, 3 programmable segments for automatic mode\u003c\/li\u003e\n\u003cli\u003eRevolution Speed: 0-500 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 137.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 137.2px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 137.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar volumes, such as 50 mL, 100 mL, 200 mL, 500 mL, and 1000 mL are available options. \u003c\/li\u003e\n\u003cli\u003eEffective slurry volume processing: 20%-70% is highly recommended. \u003c\/li\u003e\n\u003cli\u003eFor the 50 mL mixing jar, only single shaft was design due to limited inner space\u003c\/li\u003e\n\u003cli\u003eThe Cooling and Heating (\u003cspan\u003e≤150 °C\u003c\/span\u003e) functions are available.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_03_100x100.png?v=1774639286\" style=\"float: none;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_04_100x100.png?v=1774639294\" style=\"float: none;\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 ~ -0.09 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL435 * W330 * H625 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~50 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Mixer + 50 mL Jar","offer_id":47489014563046,"sku":"ESSHSDSPVSM50","price":3999.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 100 mL Jar","offer_id":47489014595814,"sku":"ESSHSDSPVSM100","price":4499.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 200 mL Jar","offer_id":47489014628582,"sku":"ESSHSDSPVSM200","price":4599.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 500 mL Jar","offer_id":47489014661350,"sku":"ESSHSDSPVSM500","price":4699.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 1000 mL Jar","offer_id":47489014694118,"sku":"ESSHSDSPVSM1000","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSHSDSPVSM_main.png?v=1774655342"},{"product_id":"eredspvsm","title":"ECS-R Economic Dual-Shaft Planetary Vacuum Slurry Mixer (1000 rpm, 500 mL), EREDSPVSM","description":"\u003cp\u003eFor battery research and electrode preparation, selecting a high-speed vacuum slurry mixer is essential to achieve a homogeneous, agglomerate-free paste. Most lab-scale planetary mixers for this application offer speeds up to 1,500 RPM, which is critical for dispersing binders and active materials without introducing air bubbles.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable style=\"height: 625.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEREDSPVSM (ER-EDSPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 500 W\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1000 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 145.6px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax Speed: 1000 rpm, 4 programmable segments for automatic mode\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine Speed of Stirring Shaft: 5.4 m\/s\u003c\/li\u003e\n\u003cli\u003eLine Speed of Dispersing Impeller: 5.3 m\/s\u003c\/li\u003e\n\u003cli\u003eStirring Shaft Size: Φ35 mm\u003c\/li\u003e\n\u003cli\u003eDispersing Impeller: Φ34 mm\u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: Max. 12000 cP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 min\u003c\/li\u003e\n\u003cli\u003eCycle Times: 9999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 68px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 68px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 68px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar volume: 500 mL (other volumes of 250 mL and 1 L with dual-shaft planetary design, as well as 50, 100, 150 mL with single mixing impeller are available upon request)\u003c\/li\u003e\n\u003cli\u003eThe dual-shaft design is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM_02_100x100.png?v=1779083290\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -85 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL330 * W320 * H570 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~27 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47489133052134,"sku":"ETSMSDSPVSM","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM.png?v=1779083289"},{"product_id":"etmtspvsm","title":"ECS-TM Three-Shaft (Two Mixing, One Dispersing) Planetary Vacuum Slurry Mixer (2-10 L)- ETMTSPVSM","description":"\u003cp\u003eFor high-viscosity electrode pastes and advanced battery research, a three-shaft vacuum slurry mixer (often called a planetary dispersive mixer) is the professional standard. Unlike standard mixers, these units combine low-speed planetary folding with high-speed shear dispersion to break down tough agglomerates in binders like PVDF or carboxymethyl cellulose (CMC).\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM10L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~2000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~4000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~5500 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Barrel \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 1.2-2.0 L (design volume is 3.8 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 180 mm, Depth: 150 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/8\". \u003c\/li\u003e\n\u003cli\u003eNo discharge valve at the bottom of the barrel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 2.7-5.0 L (design volume is 8.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D.240 mm, Depth: 180 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/4\". \u003c\/li\u003e\n\u003cli\u003eG1-1\/2\" discharge valve is available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 5.0-10.0 L (design volume is 16 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 310 mm, Depth: 220 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G1\/2\". \u003c\/li\u003e\n\u003cli\u003eG 1\" discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 750 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 94 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 8-76 rpm (line speed: 0.03-0.37m\/s, Planetary revolution speed: 5-52 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 6 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2-3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 1500 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 124 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 10-98 rpm (line speed: 0.06-0.60m\/s; Planetary revolution speed: 5-50 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 6.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2-3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 2200 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 161 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 10-100 rpm (line speed: 0.08-0.80m\/s; Planetary revolution speed: 5-50 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 7.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 450-4450 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.3-13 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 450-4450 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.3-13 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 2200 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 70 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 610-6100 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 2.2-22 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSpatula\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1300mm×W550mm×H1600mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1463mm×W610mm×H1770mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1500mm×W650mm×H1800mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~600 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~700 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~800 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"TOB","offers":[{"title":"2 L","offer_id":47491632562406,"sku":"ETMTSPVSM2L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"5 L","offer_id":47491632595174,"sku":"ETMTSPVSM5L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"10 L","offer_id":47491632627942,"sku":"ETMTSPVSM10L","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_main.png?v=1774655998"},{"product_id":"etsdsmdpvsm","title":"ECS-TS Dual-Shaft (Mixing + Dispersing) Planetary Vacuum Slurry Mixer (1000 mL)- ETSDSMDPVSM","description":"\u003cp\u003eFor high-viscosity laboratory slurries, a three-shaft or dual-shaft vacuum mixer is the standard for achieving a truly homogeneous, bubble-free dispersion. These systems combine low-speed \"folding\" of the bulk material with high-speed \"shearing\" to break down microscopic agglomerates.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eETSDSMDPVSM (ETS-DSMDPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~2000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMixing Barrel\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 0.7-2.1 L (design volume is 2.1 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 164 mm, Depth: 100 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/8\". \u003c\/li\u003e\n\u003cli\u003eUpper barrel section: (1) 1pcs DN50 for powder feeding port; (2) 1 pcs DN50 for observation mirror port; (3) 1 pcs 1\/2\" port for liquid feeding. (4) Vacuum port size is G1\/2\"; (5) One exhaust port for vacuum pump connection; (6) One port for digital vacuum gauge installation. \u003c\/li\u003e\n\u003cli\u003eBottom barrel section: traverse distance ≤212mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSDSMDPVSM_02_160x160.png?v=1774659514\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 550 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (1 pcs): SS304, Spiral twist type, 90° helix, diameter: 83 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 5-40 rpm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: 2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 580-58000 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.8-18 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSpatula\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for slurry viscosity is \u0026lt;1.2 million cP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500 * W350 * H320 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"TOB","offers":[{"title":"Default Title","offer_id":47489220444390,"sku":"ETSDSMDPVSM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSDSMDPVSM_main.png?v=1774659166"},{"product_id":"esmfspvsm","title":"ECS-SM Four-Shaft (Two Mixing, Two Dispersing) Planetary Vacuum Slurry Mixer (2-10 L)- ESMFSPVSM","description":"\u003cp\u003eA four-shaft planetary vacuum mixer—specifically configured with two mixing (stirring) shafts and two dispersing shafts—is the gold standard for achieving sub-micron particle distribution and bubble-free homogeneity. In this setup, the mixing shafts handle the bulk movement and \"folding\" of the paste, while the high-speed dispersing shafts provide the intense shear required to break down conductive additive agglomerates (like CNTs or Carbon Black).\u003c\/p\u003e\n\u003cp\u003eIt is a precise laboratory unit designed for complex slurry preparation. It utilizes a rotation + revolution method where all four shafts revolve around the tank while spinning on their own axes, ensuring zero \"dead zones.\" (1) \u003cstrong\u003eDispersion Power\u003c\/strong\u003e: Two high-speed shafts reaching 0–3800 RPM for aggressive particle size reduction. (2) \u003cstrong\u003eStirring Efficiency\u003c\/strong\u003e: Two low-speed twist blades (2–112 RPM) move the bulk material from the walls to the dispersers. (3) \u003cstrong\u003eIntegrated Cooling\u003c\/strong\u003e: Includes a 9L water chiller to counteract the heat generated by the high-speed shafts, protecting sensitive binders like PVDF. (4) \u003cstrong\u003eSafety\u003c\/strong\u003e: PLC control with an observation window to monitor slurry consistency in real-time\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM10L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~3000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~5000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~7000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Barrel \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~2.0 L (design volume is 3.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 180 mm, Depth: 130 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available.\u003c\/li\u003e\n\u003cli\u003eA discharge valve is designed at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~5.0 L (design volume is 8.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D.240 mm, Depth: 180 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. \u003c\/li\u003e\n\u003cli\u003eA discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~10 L (design volume is 12 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 310 mm, Depth: 220 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available.\u003c\/li\u003e\n\u003cli\u003eA discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 2-112 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed:2-112 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 2-110 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-3800 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-6900 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-6000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSpatula\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSlurry Viscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL930mm×W1120mm×H1400mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL960mm×W1150mm×H2050mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL990mm×W1200mm×H2000mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~360 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~550 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~650 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"2 L","offer_id":47491649274086,"sku":"ESMFSPVSM2L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"5 L","offer_id":47491649306854,"sku":"ESMFSPVSM5L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"10 L","offer_id":47491649339622,"sku":"ESMFSPVSM10L","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_main.png?v=1774759233"},{"product_id":"esstcchvb","title":"ECS-SS Tape Casting Coater with Heating Vacuum Bed (L200*W120 mm, 120℃), ESSTCCHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSTCCHVB (ESS-TCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 280 W \u003c\/li\u003e\n\u003cli\u003eA DC24V converter is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L200*W120mm, which enable the effective coating area is L190mm * W100 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-48 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eBottom Heating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(253, 8, 8);\"\u003eOptional\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Four Side Film Applicator with Fixed Gap\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            The standard one (effective coating width of 80mm) has four-side\u003c\/p\u003e\n\u003cp\u003e            gap of 100 um, 150 um, 200 um, and 250 um. Other options can\u003c\/p\u003e\n\u003cp\u003e            be found here (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003eESSAFSFAFG\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_02_160x160.png?v=1774764406\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003eESSAFAW80\u003c\/a\u003e)\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width is 80 mm and adjustable gap is 0-3 mm (resolution: 5 um).  \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_03_160x160.png?v=1774765217\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn individual pump with DC24V power input is included \u003c\/li\u003e\n\u003cli\u003e8 mm O.D. tubing connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL360 * W220 * H210 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~20 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Coater + Four-Side Film Applicator with Fix Gap","offer_id":47491696754918,"sku":"ESSTCCHVBFS","price":3499.0,"currency_code":"USD","in_stock":true},{"title":"Coater + Standard Film Applicator with Adjustable Gap","offer_id":47491696787686,"sku":"ESSTCCHVBS","price":3799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_main.png?v=1774767247"},{"product_id":"essmtccihcvb","title":"ECS-SS Multifunctional Tape Casting Coater (Doctor Blade, Slot Die, and Wire Rod) with Infrared Heating Cover (120℃) and Vacuum Bed (L230*W120 mm), ESSMTCCIHCVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), a tape casting coater with an infrared (IR) heating cover and vacuum bed provides a dual-advantage: the vacuum bed ensures the substrate stays perfectly flat during the stroke, while the IR cover enables rapid, uniform drying from the surface down. This is particularly effective for thick electrodes or ceramic tapes where \"skinning\" (trapped solvent under a dried surface layer) is a common defect\u003cspan style=\"font-size: 0.875rem;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSMTCCIHCVB (ESS-MTCCIHCVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1300 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be customized upon request or equipped with a 2000W transformer.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L230*W120mm, which enable the effective coating area is L220mm * W100 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1-30 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIR heating cover: Max. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eResistance heating bottom: Max. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eRealizing the simultaneous heating at the top and bottom. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(253, 8, 8);\"\u003eOptional\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Four Side Film Applicator with Fixed Gap\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            The standard one (effective coating width of 80mm) has four-side\u003c\/p\u003e\n\u003cp\u003e            gap of 100 um, 150 um, 200 um, and 250 um. Other options can\u003c\/p\u003e\n\u003cp\u003e            be found here (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003eESSAFSFAFG\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_02_100x100.png?v=1774764406\" alt=\"\" style=\"float: none;\" width=\"86\" height=\"86\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap, \u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003eESSAFAW80\u003c\/a\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width is 100 mm and adjustable gap is 0-3 mm (resolution: 5 um).  \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003cimg height=\"91\" width=\"91\" style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_03_100x100.png?v=1774765217\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 3\u003c\/strong\u003e: Hybrid Fim Applicator (Doctor + Slot Die), \u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47492745986278\"\u003eESSAHFAW80\u003c\/a\u003e  \u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width for the doctor blade is 100 mm and adjustable gap is 0-6 mm (resolution: 5 um)\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width for the slot die head is 80mm. The inside channel volume is 2 mL. The shims with thickness of 0.1, 0.2, 0.3, 0.4, 0.5 mm are included.  \u003c\/div\u003e\n \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 4\u003c\/strong\u003e: Wire Rod (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essawrw100?variant=47492793827558\"\u003eESSAWRW100\u003c\/a\u003e) \u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe maximum coating width for the wire rod (D=10mm) is 100 mm. \u003cstrong\u003eThe wire groove diameter \u003c\/strong\u003e(determine the coating width, not the physical rod diameter):  6 um, 8 um, 10 um, 12 um, 15 um, 20 um, 25 um, 30 um, 40 um, 50 um, 60 um, 80 um, 100 um, 150 um, and 200 um are available.\u003ca href=\"https:\/\/echemsupplies.com\/products\/essawrw100?variant=47492793827558\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCIHCVB_03_160x160.png?v=1774808616\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn individual vacuum pump is included for sucking the substrate on vacuum bed \u003c\/li\u003e\n\u003cli\u003e8 mm O.D. tubing connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL470 * W420 * H360 mm for main coater (\u003cstrong\u003eglovebox-compatible\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eL200 * W170 * H150 mm for vacuum pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~42 kg (36 kg for coater and 6 kg for vacuum pump)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/full\/10.1002\/ente.202000259\"\u003eR Diehm, et al., High-Speed Coating of Primer Layer for Li-Ion Battery Electrodes by Using Slot-Die Coating, Energy Technology, 2020, 8, 2000259\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eM. S. Kim, et al., Multifunctional Separator Coatings for High-Performance \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eLithium–Sulfur Batteries, Adv. Mater. Interfaces, 2016, 3, 1600450\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Coater + Four-Side Film Applicator with Fix Gap","offer_id":47492678254822,"sku":"ESSMTCCIHCVBFS","price":3899.0,"currency_code":"USD","in_stock":true},{"title":"Coater + Standard Film Applicator with Adjustable Gap","offer_id":47492678287590,"sku":"ESSMTCCIHCVDS","price":3999.0,"currency_code":"USD","in_stock":true},{"title":"Coater + Slot Die","offer_id":47492727210214,"sku":"ESSMTCCIHCVBSD","price":4399.0,"currency_code":"USD","in_stock":true},{"title":"Coater + Wire Rod","offer_id":47492727242982,"sku":"ESSMTCCIHCVBWR","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMTCCIHCVB_main.png?v=1774809795"},{"product_id":"esmtccihcvb","title":"ECS-SM Tape Casting Coater with Infrared Heating Cover (120℃) and Vacuum Bed (L270*W200 mm), ESMTCCIHCVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), a tape casting coater with an infrared (IR) heating cover and vacuum bed provides a dual-advantage: the vacuum bed ensures the substrate stays perfectly flat during the stroke, while the IR cover enables rapid, uniform drying from the surface down. This is particularly effective for thick electrodes or ceramic tapes where \"skinning\" (trapped solvent under a dried surface layer) is a common defect\u003cspan style=\"font-size: 0.875rem;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMTCCIHCVB (ESM-TCCIHCVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2200 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be customized upon request or equipped with a 3000W transformer.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L300*W200mm, which enable the effective coating area is L270mm * W150 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e20-120 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIR heating cover: Max. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eNo resistance heating at bottom, which is good for cooling process for double-side coating (after one side coating)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFilm Applicator with an Adjustable Width, \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmafaacw?variant=47492852416742\"\u003eESMAFAACW\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe maximum coating width is 150 mm, and adjustable coating width can be realized by moving the central plate. \u003c\/li\u003e\n\u003cli\u003eAdjustable gap: 0-3 mm (mechanical gauge, 10 um resolution). The digital gauge can be upgraded upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmafaacw?variant=47492852416742\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCIHCVB_02_100x100.png?v=1774820283\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn vacuum pump is built-in for sucking the substrate on vacuum bed \u003c\/li\u003e\n\u003cli\u003eVacuum level: -84 KPa, Max. flow rate: 30 L\/min, 120 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL670 * W370 * H370 mm for main coater (\u003cstrong\u003eglovebox-compatible\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eL540 * W260 * H430 mm for control box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~100 kg (70 kg for coater and 30 kg for control box)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eM. S. Kim, et al., Multifunctional Separator Coatings for High-Performance \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eLithium–Sulfur Batteries, Adv. Mater. Interfaces, 2016, 3, 1600450\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47492825940198,"sku":"ESMTCCIHCVB","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCIHCVB_main.png?v=1774819591"},{"product_id":"esmmtcchvb","title":"ECS-SM Multifunctional Tape Casting Coater (Doctor Blade + Wire Rod + Slot Die) with Heated Vacuum Bed (L200*W200 mm, 160°C), ESMMTCCHVB","description":"\u003cp\u003eA 3-in-1 (multifunctional) tape casting coater is designed to support doctor blade, wire rod, and slot die coating methods on a single machine. This versatility is perfect for labs that need to switch between high-viscosity battery pastes and ultra-thin, low-viscosity functional coatings.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMMTCCHVB (ESM-MTCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1000 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be customized upon request or equipped with a 1500W transformer.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe vacuum bed supports a coating area of L200*W200mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-70 mm\/s (adjustable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eBottom Resistance Heating\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBottom Heating Temperature: Max. 160 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eSmall vacuum holes: φ3 mm\u003c\/li\u003e\n\u003cli\u003eSurface Flatness: ≤5um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Film Applicator with an Adjustable Width, \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmafaacw?variant=47492852416742\"\u003eESMAFAACW\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe maximum coating width is 150 mm, and adjustable coating width can be realized by moving the central plate. \u003c\/li\u003e\n\u003cli\u003eAdjustable gap: 0-3 mm (mechanical gauge, 10 um resolution). The digital gauge can be upgraded upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmafaacw?variant=47492852416742\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCIHCVB_02_100x100.png?v=1774820283\" style=\"margin-bottom: 16px; float: none;\" width=\"84\" height=\"84\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e(2) Wire Rod (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esmawrw200?variant=47492903174374\"\u003eESMAWRW200\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e) \u003c\/span\u003e\u003cbr\u003e\n\u003cdiv\u003eThe maximum coating width for the wire rod (D=10mm) is 200 mm (other coating widths also can be supplied upon request).\u003cspan\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eThe wire groove diameter\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(determine the coating width, not the physical rod diameter):  6 um, 8 um, 10 um, 12 um, 15 um, 20 um, 25 um, 30 um, 40 um, 50 um, 60 um, 80 um, 100 um, 150 um, and 200 um are available. Only \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eTheoretically the dry coating thickness T = 0.5 * (wire groove diameter) * (transfer coefficient) * (solid-state content); Normally the transfer coefficient is in 0.5-0.7 and we will choose 0.6 as a typical value. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmawrw200?variant=47492903174374\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCDWHVB_02_100x100.png?v=1774827354\" width=\"77\" height=\"77\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e(3) Slot Die (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47501068566758\"\u003eESSAHFASD200\u003c\/a\u003e)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e           The maximum slot die coating width is 200 mm. An economic syringe pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcepsp?variant=47501234307302\"\u003eEASDCEPSP\u003c\/a\u003e) can be used as the slurry feeder. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSAHFA_main_100x100.png?v=1776022370\" style=\"margin-bottom: 16px; float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCEPSP_main_100x100.png?v=1781726902\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn vacuum pump is externally connected for sucking the substrate on vacuum bed \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500 * W320 * H240 mm for main coater (\u003cstrong\u003eglovebox-compatible\u003c\/strong\u003e)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~40 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eM. S. Kim, et al., Multifunctional Separator Coatings for High-Performance \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eLithium–Sulfur Batteries, Adv. Mater. Interfaces, 2016, 3, 1600450\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Doctor Blade","offer_id":47492927422694,"sku":"ESMMTCCHVBDB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Wire Rod","offer_id":47492927455462,"sku":"ESMMTCCHVBWR","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Doctor Blade+ Wire Rod","offer_id":47492927520998,"sku":"ESMMTCCHVBDBWR","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Doctor Blade + Wire Rod + Slot Die","offer_id":47899143274726,"sku":"ESMMTCCHVBDBWRSD","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCDWHVB_03.png?v=1774828337"},{"product_id":"esssdchvb","title":"ECS-SS Slot Die Coater with Heating Vacuum Bed (L150*W130 mm, 120℃), ESSSDCHVB","description":"\u003cp\u003eFor high-precision laboratory coating, a slot-die coater paired with a heated vacuum bed offers the most advanced control over film uniformity and drying kinetics. Unlike a doctor blade, a slot-die head is a closed system, which prevents solvent evaporation during the process and allows for a \"pre-metered\" coating where the thickness is determined by the pump's flow rate rather than a mechanical gap.\u003c\/p\u003e\n\u003cp\u003eThe key advantages for slot die coating: (1) \u003cstrong\u003eZero-Waste Coating\u003c\/strong\u003e: The closed-head design of a slot-die ensures that almost 100% of your slurry is deposited onto the substrate, which is vital when working with expensive materials like specialized catalysts or solid-state electrolytes. (2) \u003cstrong\u003ePrecision Drying\u003c\/strong\u003e: The vacuum bed prevents the substrate from warping under the heat of the IR or convection dryer, maintaining a perfectly flat plane for the slot-die head to glide over (typically at a height of 10-100µm). (3) \u003cstrong\u003eScalability\u003c\/strong\u003e: Because slot-die coating is a flow-rate-dependent process, the parameters you develop on these lab-scale heated beds can be directly translated to industrial production lines.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSSDCHVB (ESS-SDCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 280 W \u003c\/li\u003e\n\u003cli\u003eA DC24V converter is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L150*W130mm, which enable the effective coating area of L100mm * W100 mm with included slot die head\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.05-20 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eBottom Heating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eSlot Die Head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSSDCHVB_02_100x100.png?v=1774847446\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA slot die head with a 100 mm width is included\u003c\/li\u003e\n\u003cli\u003eFour pieces of shims, such as 0.1, 0.2, 0.3, 0.4 mm are included\u003c\/li\u003e\n\u003cli\u003eThe coating width within 100 mm can be realized by customized the opening mouth of the shims. \u003c\/li\u003e\n\u003cli\u003eInside channel volume is around 2.6 mL\u003c\/li\u003e\n\u003cli\u003eThe gap between the slot die tip and vacuum bed can be adjusted in 0-5 mm by rotating the digital gauges (resolution:1 um)\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry Feeding Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne 20 mL stainless steel syringe with a plastic plunger is included., which can be mounted at the side. A large syringe (eg: 60 mL) can be supplied upon request). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSSDCHVB_03_100x100.png?v=1774848495\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry feeding speed: 0.05-5 mL\/s \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA small vacuum pump is built-in for sucking the coating substrates \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL450 * W360 * H350 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~20 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/full\/10.1002\/ente.202200684\"\u003eS. Spiegel, et al., Thin cathode for thermal batteries using a tape-casting proces, Energy Technology, 2023, 11, 2200684\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47493680070886,"sku":"ESSSDCHVB","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSSDCHVB_main.png?v=1774847432"},{"product_id":"esmsdchvb","title":"ECS-SM Slot Die Coater with Heating Vacuum Bed (L360*W250 mm, 100℃), ESMSDCHVB","description":"\u003cp\u003eFor high-precision laboratory coating, a slot-die coater paired with a heated vacuum bed offers the most advanced control over film uniformity and drying kinetics. Unlike a doctor blade, a slot-die head is a closed system, which prevents solvent evaporation during the process and allows for a \"pre-metered\" coating where the thickness is determined by the pump's flow rate rather than a mechanical gap.\u003c\/p\u003e\n\u003cp\u003eThe key advantages for slot die coating: (1) \u003cstrong\u003eZero-Waste Coating\u003c\/strong\u003e: The closed-head design of a slot-die ensures that almost 100% of your slurry is deposited onto the substrate, which is vital when working with expensive materials like specialized catalysts or solid-state electrolytes. (2) \u003cstrong\u003ePrecision Drying\u003c\/strong\u003e: The vacuum bed prevents the substrate from warping under the heat of the IR or convection dryer, maintaining a perfectly flat plane for the slot-die head to glide over (typically at a height of 10-100µm). (3) \u003cstrong\u003eScalability\u003c\/strong\u003e: Because slot-die coating is a flow-rate-dependent process, the parameters you develop on these lab-scale heated beds can be directly translated to industrial production lines.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMSDCHVB (ESM-SDCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 500 W \u003c\/li\u003e\n\u003cli\u003eA DC24V converter is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L360*W250mm, which enable the effective coating area of L300mm * W200 mm with included slot die head\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.05-20 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eBottom Heating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100 ℃ (single-point control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eSlot Die Head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSSDCHVB_02_100x100.png?v=1774847446\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA slot die head with a 200 mm width is included\u003c\/li\u003e\n\u003cli\u003eFour pieces of shims, such as 0.1, 0.2, 0.3, 0.4 mm are included\u003c\/li\u003e\n\u003cli\u003eThe coating width within 200 mm can be realized by customized the opening mouth of the shims. \u003c\/li\u003e\n\u003cli\u003eInside channel volume is around 8.0 mL\u003c\/li\u003e\n\u003cli\u003eThe gap between the slot die tip and vacuum bed can be adjusted in 0-5 mm by rotating the digital gauges (resolution:1 um)\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry Feeding Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne 60 mL stainless steel syringe with a plastic plunger is included., which can be mounted at the side. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMSDCHVB_02_100x100.png?v=1774853240\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry feeding speed: 0.1-1.5 mm\/s \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA small vacuum pump is built-in for sucking the coating substrates \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eUpgrade Version (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor melting-slot die extrusion process, such as polymer-based solid-state electrolyte, the feed syringe and slot die head with heating jacket (100 ℃) can be supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMSDCHVB_03_160x160.png?v=1774854036\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL450 * W360 * H350 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~20 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/full\/10.1002\/ente.202200684\"\u003eS. Spiegel, et al., Thin cathode for thermal batteries using a tape-casting process, Energy Technology, 2023, 11, 2200684\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47493742133478,"sku":"ESMSDCHVB","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMSDCHVB_main.png?v=1774853240"},{"product_id":"esmr2reficcc","title":"ECS-SM Lab-Scale Roll-to-Roll Electrode Fabrication with Integrated Coater, Calender, and Cutter, ESMR2REFICCC","description":"\u003cp\u003eFor lab-scale roll-to-roll (R2R) electrode fabrication, the process is typically divided into three primary stages: precision coating, densification (calendering), and final shaping (slitting\/cutting). Transitioning to R2R allows you to simulate industrial production while maintaining the flexibility of a research environment.\u003c\/p\u003e\n\u003cp\u003eThe lab-scale roll-to-roll electrode fabrication unit integrated the coating, rolling press, and die cutting to continuously obtain round electrode disk and electrode sheet for coin cell and pouch cell, respectively. \u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMR2REFICCC (ESM-R2REF-ICCC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower Source\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 5500 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be realized by using a high power transformer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Source\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-0.8 MPa for pneumatic operation \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eGuiding Roller Width: 100 mm\u003c\/li\u003e\n\u003cli\u003eMax. substrate roll and coating width is 80 and 60 mm, respectively. A four-side film applicator is included. \u003c\/li\u003e\n\u003cli\u003eWeb Speed: 0.01-1.0 m\/min\u003c\/li\u003e\n\u003cli\u003eCoating Speed: 0.2 m\/min (based on graphite anode slurry, viscosity is 2000 cP, solid content is 45% and dry film thickness of 90 um)\u003c\/li\u003e\n\u003cli\u003eCoating thickness uniformity: ±3μm\u003c\/li\u003e\n\u003cli\u003eManual slurry loading. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDrying Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eConvection heating mode, single chamber length: 0.5 m\u003c\/li\u003e\n\u003cli\u003eElectric heating with a power of 2400 W\u003c\/li\u003e\n\u003cli\u003eMax. heating temperature: 130℃ \u003c\/li\u003e\n\u003cli\u003eVentilation: centrifugal fan with air flow of 570 m3\/h. The outlet port size is 120 mm to connect a 5\" aluminum pipe.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eRolling Press Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCold Calender with a size of Φ100 x L90mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRoller hardness: ≥HRC55\u003c\/li\u003e\n\u003cli\u003eRolling gap: 0-1.5 mm, adjustable with mechanical gauge\u003c\/li\u003e\n\u003cli\u003eMax. rolling press force: 5 T (unchangeable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eElectrode Cutting Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTraverse distance for cutting: Max. 16 mm \u003c\/li\u003e\n\u003cli\u003eFor coin cell, the cutting die is available in φ8～φ24mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTension Control \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-40 N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLoading Roll\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWinding\/Unwinding Roll Diameter: Max. Ф250mm\u003c\/li\u003e\n\u003cli\u003eCardboard Size: I.D. 3\" \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL2000 * W750 * H850 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~500 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2405829720301641\"\u003eD. L. Wood III, et al., Perspectives on the relationship between materials chemistry and roll-to-roll electrode manufacturing for high-energy lithium-ion batteries, Energy Storage Materials, 2020, 29, 254-265\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.nature.com\/articles\/s44359-024-00018-w\"\u003eR. Tao, et al., Advanced electrode processing for lithium-ion battery manufacturing, Nature Reviews Clean Technology, 2025, 1, 116–131\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47493881069798,"sku":"ESMR2REFICCC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMR2REFICCC_main.png?v=1774858221"},{"product_id":"essccmdec","title":"ECS-SS Precise Manual Disk Electrode Cutter for Coin Cells, ESSCCMDEC","description":"\u003cp\u003eFor precise electrode disc preparation, the choice between a manual punch and an automated cutter depends on your throughput and the physical properties of your coated \"tapes.\" For coin cell assembly (CR2016, CR2025, CR2032), the edges must be perfectly burr-free to prevent internal short circuits.\u003c\/p\u003e\n\u003cp\u003eFor the manual disk electrode cutter, which uses a spring-loaded plunger and a hardened steel die to \"punch\" the disc out of the foil. The standard diameters are normally 12, 15, 16, 18, 19, and 20 mm dies. Typically, the cathode is cut to 14–15 mm and the anode to 15–16 mm to ensure complete coverage and account for slight misalignment during assembly. Compact to pneumatic or electric one, it can be transferred to the glovebox antechamber and no power is required for operation. \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 482.4px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSCCMDEC (ESS-CC-MDEC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePunching Force\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e200 kg force\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 16 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 51.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 51.2px;\"\u003e\n\u003cp\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/esacd?variant=47734190801126\"\u003e\u003cimg height=\"77\" width=\"77\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESACD_main_100x100.jpg?v=1780381699\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 51.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eφ3～φ24, regular sizes of φ8,  φ10, φ12, φ14, φ15, φ16, φ19, and φ20 can be supplied quickly, while other sizes also can be provided with slightly long lead time. \u003c\/li\u003e\n\u003cli\u003eStandard cutting dies of \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eφ14 and φ16\u003c\/span\u003e are included in the package. \u003c\/li\u003e\n\u003cli\u003ePlease select needed cutting die sizes when purchase the disk cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBefore the installation of die sets, please check the part number (eg. A30612) of pushing rod and bottom plate is consistent.\u003c\/li\u003e\n\u003cli\u003eThe alignment for pushing rod and bottom plate is critical. Normally the bottom plate should be loose until the pushing rod constantly goes through the hole smoothly. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL140 * W200 * H400 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~16 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47495388725478,"sku":"ESSCCMDEC","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMDEC_main.png?v=1774899958"},{"product_id":"esscchtpdec","title":"ECS-SS High-Throughput Pneumatic Disk Electrode Cutter (D=15, 16, 19 mm) for Coin Cells, ESSCCHTPDEC","description":"\u003cp\u003eFor high-throughput coin cell electrode preparation, pneumatic disc cutters are the industry standard due to their speed, repeatability, and ability to handle delicate or brittle materials without the mechanical \"stutter\" of manual punches.\u003c\/p\u003e\n\u003cp\u003eThe high-throughput pneumatic disk cutter has the following features: (1) \u003cstrong\u003eBurr-Free Edges\u003c\/strong\u003e: Pneumatic systems provide a consistent, high-velocity vertical force that shears the foil cleanly. This is vital to prevent microscopic metal \"burrs\" that could pierce the separator and cause cell failure during cycling. (2) \u003cstrong\u003eGlovebox Safety\u003c\/strong\u003e: Most high-throughput models are purely pneumatic. Because they use no electricity, they eliminate the risk of sparks and heat generation inside the volatile atmosphere of a glovebox. (3) \u003cstrong\u003eLow Material Waste\u003c\/strong\u003e: High-throughput dies are often arranged in optimized patterns to maximize the number of discs per square centimeter of your coated tape.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSCCHTPDEC (ESS-CC-HTPDEC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Force\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 1 T (for electrode cutting, 500 kg force is recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003cli\u003eVertical Bur: ≤12μm, Horizontal Bur: ≤20μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard φ15, φ16, and φ19 cutting dies are included.\u003c\/li\u003e\n\u003cli\u003eOther Sizes, φ8,  φ10, φ12, φ14, and φ20 can be supplied upon request\u003c\/li\u003e\n\u003cli\u003e1-to-8 pieces are produced. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCHTPDEC_02_100x100.png?v=1774907225\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor or a gas tank is required to provide 60-80 psi to support the pneumatic operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL370 * W245 * H245 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~38 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47496377696486,"sku":"ESSCCHTPDEC","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCHTPDEC_main.png?v=1774907072"},{"product_id":"esspcpesc","title":"ECS-SS Pneumatic Electrode Sheet Cutter (L120mm x W80mm) for Pouch Cells, ESSPCPESC","description":"\u003cp\u003eFor high-throughput pouch cell production, a pneumatic pouch cell cutter (also known as a pneumatic die cutting machine) is used to precisely cut the rectangular shapes from coated electrode sheets. Unlike coin cell cutters, which use simple circular dies, pouch cell cutters must handle larger areas and provide specific tabs for current collection.\u003c\/p\u003e\n\u003cp\u003eThe key features of pneumatic pouch cell cutter are: (1) \u003cstrong\u003ePrecision Die Sets\u003c\/strong\u003e: These machines use specialized \"male-female\" die sets made of hardened tungsten steel or Cr12MoV. This ensures the edges are burr-free (\u0026lt;15 um), which is critical to prevent internal short circuits in stacked or folded pouch cells. (2) \u003cstrong\u003ePneumatic Actuation\u003c\/strong\u003e: By using compressed air (typically 0.5–0.8 MPa), the cutter provides a consistent, high-velocity vertical force that is far superior to manual lever-arm cutters for repeatability. (3) \u003cstrong\u003eSafety Interlocks\u003c\/strong\u003e: Most professional units feature a light curtain or a dual-button start system to ensure the operator's hands are clear of the cutting zone. (4) \u003cstrong\u003eGlovebox Compatibility\u003c\/strong\u003e: Many models are designed with a compact footprint to be placed inside an argon-filled glovebox for cutting moisture-sensitive anodes or specialized solid-state electrolytes.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCPESC (ESS-PC-PESC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Force\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 1 T (for electrode cutting, 500 kg force is recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003cli\u003eVertical Bur: ≤12μm, Horizontal Bur: ≤20μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_02_100x100.png?v=1774909824\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard cutting dies: 58mm*45mm for anode, and 56mm*43mm for cathode.\u003c\/li\u003e\n\u003cli\u003eFor any customization, please indicate the following parameters: \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_160x160.png?v=1774910247\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) or a gas tank is required to provide 60-80 psi to support the pneumatic operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL370 * W245 * H245 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~38 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47496420557030,"sku":"ESSPCPESC","price":3299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCHTPDEC_main.png?v=1774907072"},{"product_id":"esmecpccrp","title":"ECS-SM Pressure-Control Cold Rolling Press (W200mm) for Electrode Calendering, ESMECPCCRP","description":"\u003cp\u003eFor high-precision electrode calendering, transitioning from simple gap-control (setting the distance between rollers) to pressure-control is the key to achieving consistent energy density and ionic conductivity. In a pressure-controlled system, the machine uses hydraulic or servo-actuators to apply a specific, measurable force (typically in metric tons) regardless of slight variations in the initial coating thickness.\u003c\/p\u003e\n\u003cp\u003eWhen using a pressure-control press, your goal is to optimize the Packing Density (PD) = m\/(A*t). Where m is the mass of active material, A is the area, and t is the post-calendering thickness. (1) \u003cstrong\u003e10% Rule\u003c\/strong\u003e: For most lithium-ion cathodes (NMC\/LFP), aim for a thickness reduction of approximately 10–20% per pass. Attempting more can cause \"spring-back\" or delamination. (2) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: Calendering at 60-100 °C reduces the yield strength of the PVDF binder, allowing for higher density at lower pressures and reducing the risk of foil cracking. (3) \u003cstrong\u003eLinear Pressure\u003c\/strong\u003e: In production, pressure is often reported as N\/mm (force divided by the width of the electrode). Lab machines that report total \"Tons\" should be converted to linear pressure for academic reporting.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMECPCCRP (ESM-EC-PCCRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCold Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ100 x 215mm (effective width: 200 mm)\u003c\/li\u003e\n\u003cli\u003eRoller is made of Cr12Mo1V1 and surface plated with Cr layer\u003c\/li\u003e\n\u003cli\u003eSurface Hardness: HRC58～60, surface coating thickness: ≥10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 5T, adjustable in HMI touch screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.3-2.5m \/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-2.0 mm, manually adjust\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eOptional\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe roller surface with PTFE coating can be customized for sticky Li\/Na metal calendering and lamination. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL644 * W355 * H595 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~160 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process,Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47496509817062,"sku":"ESMECPCCRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMECPCCRP.png?v=1774914208"},{"product_id":"essccmhc","title":"ECS-SS Manual Hydraulic Crimper (CR20XX) for Coin Cells, ESSCCMHC","description":"\u003cp\u003eFor manual coin cell assembly, a hydraulic manual crimper is the standard \"workhorse\" for laboratory research. It uses a hand-pumped hydraulic jack to provide the high, uniform pressure needed to deform the coin cell gasket and create a gas-tight seal.\u003c\/p\u003e\n\u003cp\u003eThe critical specifications for the manual hydraulic crimper are: (1) \u003cstrong\u003eDie Compatibility\u003c\/strong\u003e: Most units come with a universal die for CR2016, CR2025, and CR2032. Optional dies are required for larger cells like CR2450 or CR3032. (2) \u003cstrong\u003eSealing Pressure\u003c\/strong\u003e: For CR20XX series cells, the recommended sealing pressure is typically 800–1000 psi (approximately 50–70 kg\/cm2). (3) \u003cstrong\u003ePTFE Anti-Corrosion Core\u003c\/strong\u003e: High-quality crimpers use a PTFE core to prevent the coin cell from short-circuiting against the steel die during the crimping process. (4) \u003cstrong\u003eWeight\u003c\/strong\u003e: If you plan to move the unit in and out of a glovebox frequently, look for \"Compact\" or \"Lite\" versions which weigh 12–25 kg, compared to standard versions which can reach 40 kg.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSCCMHC (ESS-CC-MHC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoin Cell Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: φ5.0-φ35mm, \u003c\/li\u003e\n\u003cli\u003eMax. Height: 10mm\u003c\/li\u003e\n\u003cli\u003eA standard crimping die set for CR20XX is included.\u003c\/li\u003e\n\u003cli\u003eOther sizes in the φ13mm~φ35mm can be customized. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCrimping Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. Pressure: 8 T\u003c\/li\u003e\n\u003cli\u003eFor CR20XX coin cell series, the recommended pressure is 800-1000 psi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_03_100x100.png?v=1774978063\" alt=\"\" style=\"float: none;\"\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_04_100x100.png?v=1774978063\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e20 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDe-crimping Die (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe De-crimping can be found here, which will be used to disassemble the coin cell for post-analysis. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_05_100x100.png?v=1774978301\"\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_02_100x100.png?v=1774977964\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eOperation Environment\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe crimper should be placed inside a glovebox or a dryroom for operation due to electrolyte sensitivity. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL230 * W180 * H330 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~27 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ad2731\/meta\"\u003eC. Soulen, et al., Bridging the Gap Between Pouch and Coin Cell Electrochemical Performance in Lithium Metal Batteries, J. Electrochem. Soc., 2024, 171, 020535\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mdpi.com\/1996-1073\/15\/21\/7949\"\u003eP. M .Luc, et al., Reproducible Production of Lithium-Ion Coin Cells, Energies, 2022, 15, 7949\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47496751907046,"sku":"ESSCCMHC","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_main.png?v=1774916678"},{"product_id":"essccpc","title":"ECS-SS Pneumatic Crimper (CR20XX) for Coin Cells, ESSCCPC","description":"\u003cp\u003eFor coin cell assembly inside a glovebox, a pneumatic crimper is often considered the optimal balance between the speed of an electric unit and the reliability of a manual hydraulic one. Since it uses compressed gas (Ar or N2) to drive the sealing die, it eliminates the risk of hydraulic oil leaks and the potential for electrical arcing in an Argon atmosphere.\u003c\/p\u003e\n\u003cp\u003eThe advantages compared to other types of crimpers are summarized below: (1) \u003cstrong\u003evs. Manual Hydraulic\u003c\/strong\u003e: No risk of oil leaking into your sensitive Argon environment. It is also significantly faster and less fatiguing for high-throughput batches. (2) vs. \u003cstrong\u003eElectric\u003c\/strong\u003e: Generally more robust and less susceptible to the \"arcing\" issues that some 24V DC motors face in high-purity Argon. (3) \u003cstrong\u003evs. Pneumatic-Hydraulic Hybrid\u003c\/strong\u003e: Pure pneumatic systems are lighter (typically 25–30 kg) and easier to pass through the glovebox antechamber.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSCCPC (ESS-CC-PC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoin Cell Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: φ5.0-φ35mm, \u003c\/li\u003e\n\u003cli\u003eMax. Height: 10mm\u003c\/li\u003e\n\u003cli\u003eA standard crimping die set for CR20XX is included.\u003c\/li\u003e\n\u003cli\u003eOther sizes in the φ13mm~φ35mm can be customized. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_03_100x100.png?v=1774978063\" alt=\"\" style=\"float: none;\"\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_04_100x100.png?v=1774978063\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCrimping Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. Pressure: 1 MPa (manually adjust the input pressure)\u003c\/li\u003e\n\u003cli\u003eFor CR20XX coin cell series, the recommended pressure is 800-1000 psi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e20 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGlovebox Operation\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough is included for gas ventilation\u003c\/li\u003e\n\u003cli\u003eGas consumption amount\/each time is 490 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDe-crimping Die (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe De-crimping can be found here, which will be used to disassemble the coin cell for post-analysis. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_05_100x100.png?v=1774978301\"\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_02_100x100.png?v=1774977964\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL370 * W245 * H350 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~30 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ad2731\/meta\"\u003eC. Soulen, et al., Bridging the Gap Between Pouch and Coin Cell Electrochemical Performance in Lithium Metal Batteries, J. Electrochem. Soc., 2024, 171, 020535\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mdpi.com\/1996-1073\/15\/21\/7949\"\u003eP. M .Luc, et al., Reproducible Production of Lithium-Ion Coin Cells, Energies, 2022, 15, 7949\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47499629363430,"sku":"ESSCCPC","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCPC_main.png?v=1774979601"},{"product_id":"erstcchvb","title":"ECS-RS Tape Casting Coater with Top\/Bottom Heating (130℃) and Vacuum Bed (L250*W150 mm), ERSTCCHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable style=\"height: 1412.6px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSTCCHVB (ERS-TCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 650 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum alloy vacuum bed area is L415*W200mm, which enable the effective coating area is L300mm * W150 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTraverse Distance is 300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-120 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 538.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 538.8px;\"\u003e\u003cem\u003eHeating Model \u0026amp; Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 538.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 150 ℃ (±1°C, single-point control)\u003c\/li\u003e\n\u003cli\u003eMax. heating rate: 10 °C\/min, resistance heating mechanism\u003c\/li\u003e\n\u003cli\u003eThere are three types of heating models:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            (1) Top-Cover Heating\u003c\/p\u003e\n\u003cp\u003e                  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_02_100x100.png?v=1775014151\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e            (2) Bottom Plate Heating\u003c\/p\u003e\n\u003cp\u003e             \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_03_100x100.png?v=1775017282\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e           (3) TOP Cover + Bottom Plate Heating\u003cbr\u003e              \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_04_100x100.png?v=1775017619\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 414.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 414.6px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not included\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 414.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Four Side Film Applicator with Fixed Gap\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            The standard one (effective coating width of 80mm) has four-side\u003c\/p\u003e\n\u003cp\u003e            gap of 100 um, 150 um, 200 um, and 250 um. Other options can\u003c\/p\u003e\n\u003cp\u003e            be found here (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003eESSAFSFAFG\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_02_100x100.png?v=1774764406\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47500878053606\"\u003eETCCAFA\u003c\/a\u003e)\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width of 50 ,100 or 150 mm can be used for this coater.  \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETCCAFA_main_100x100.png?v=1775016251\"\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump is built-in for operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500 * W350 * H320 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~40 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"RSC","offers":[{"title":"Top-Cover Heating","offer_id":47500920127718,"sku":"ERSTCCTHVB","price":3599.0,"currency_code":"USD","in_stock":true},{"title":"Bottom-Plate Heating","offer_id":47500920160486,"sku":"ERSTCCBHVB","price":3599.0,"currency_code":"USD","in_stock":true},{"title":"Top Cover + Bottom Plate Heating","offer_id":47500920193254,"sku":"ERSTCCTBHVB","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_02.png?v=1775014151"},{"product_id":"etmtcchvb","title":"ECS-TM Economic Tape Casting Coater with Top\/Bottom Heating (130℃) and Vacuum Bed (L300*W250 mm), ETMTCCHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eETMTCCHVB (ETM-TCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1500 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum alloy vacuum bed area is L415*W300mm, which enable the effective coating area is L300mm * W250 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-120 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Model \u0026amp; Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 130 ℃ (±1°C, single-point control)\u003c\/li\u003e\n\u003cli\u003eMax. heating rate: 10 °C\/min, resistance heating mechanism\u003c\/li\u003e\n\u003cli\u003eThere are three types of heating models:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            (1) Top-Cover Heating (default is electric resistance heating, but \u003c\/p\u003e\n\u003cp\u003e                  IR heating is available upon request)\u003c\/p\u003e\n\u003cp\u003e                  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_02_100x100.png?v=1775014151\"\u003e\u003c\/p\u003e\n\u003cp\u003e            (2) Bottom Plate Heating\u003c\/p\u003e\n\u003cp\u003e             \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_03_100x100.png?v=1775017282\"\u003e\u003c\/p\u003e\n\u003cp\u003e           (3) TOP Cover + Bottom Plate Heating\u003cbr\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_04_100x100.png?v=1775017619\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not included\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47500878053606\"\u003eETCCAFA\u003c\/a\u003e). The recommended coating width is less than 250 mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETCCAFA_main_100x100.png?v=1775016251\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Hybrid film applicator (slot die + doctor blade) \u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47501068435686\"\u003eESSAHFA.\u003c\/a\u003e The recommend slot die coating width is less than 250 mm.  For slot die coating, the syringe pumps (\u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcepsp?variant=47501234307302\"\u003eEASDCEPSP\u003c\/a\u003e or \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdclssp?variant=47501457785062\"\u003eEASDCLSSP\u003c\/a\u003e can be considered) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMTCCIHCVB_06_100x100.png?v=1775022058\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump is built-in for operation \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL550 * W450 * H320 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"TOB","offers":[{"title":"Top-Cover Heating","offer_id":47500948373734,"sku":"ETMTCCTHVB","price":4499.0,"currency_code":"USD","in_stock":true},{"title":"Bottom-Plate Heating","offer_id":47500948406502,"sku":"ETMTCCBHVB","price":4499.0,"currency_code":"USD","in_stock":true},{"title":"Top Cover + Bottom Plate Heating","offer_id":47500948439270,"sku":"ETMTCCTBHVB","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTCCHVB_main.png?v=1775024196"},{"product_id":"erltcchvb","title":"ECS-RL Tape Casting Coater with Top\/Bottom Heating (130℃) and Vacuum Bed (L800*W150 mm), ERLTCCHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERLTCCHVB (ERL-TCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 2000 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum alloy vacuum bed area is L900*W200mm, which enable the effective coating area is L800mm * W150 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-200 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Model \u0026amp; Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 130 ℃ (±1°C, single-point control)\u003c\/li\u003e\n\u003cli\u003eMax. heating rate: 10 °C\/min, resistance heating mechanism\u003c\/li\u003e\n\u003cli\u003eThere are three types of heating models:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            (1) Top-Cover Heating (default is electric resistance heating, but \u003c\/p\u003e\n\u003cp\u003e                  IR heating is available upon request)\u003c\/p\u003e\n\u003cp\u003e            (2) Bottom Plate Heating\u003c\/p\u003e\n\u003cp\u003e            (3) TOP Cover + Bottom Plate Heating\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not included\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: \u003cspan\u003eFour Side Film Applicator with Fixed Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003eESSAFSFAFG\u003c\/a\u003e)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e          \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_02_100x100.png?v=1774771839\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47500878053606\"\u003eETCCAFA\u003c\/a\u003e). The recommended doctor blade coating width is 50 mm, 100 mm, and 150 mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETCCAFA_main_100x100.png?v=1775016251\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 3\u003c\/strong\u003e: Hybrid film applicator (slot die + doctor blade) \u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47501068435686\"\u003eESSAHFA.\u003c\/a\u003e The recommend slot die coating head is Slot Die (100 mm) + Doctor Blade (150 mm).  For slot die coating, the syringe pumps (\u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcepsp?variant=47501234307302\"\u003eEASDCEPSP\u003c\/a\u003e or \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdclssp?variant=47501457785062\"\u003eEASDCLSSP\u003c\/a\u003e can be considered) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMTCCIHCVB_06_100x100.png?v=1775022058\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump is externally connected for operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL550 * W450 * H320 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"RSC","offers":[{"title":"Top-Cover Heating","offer_id":47502052819174,"sku":"ERLTCCTHVB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Bottom-Plate Heating","offer_id":47502052851942,"sku":"ERLTCCBHVB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Top Cover + Bottom Plate Heating","offer_id":47502052884710,"sku":"ERLTCCTBHVB","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETLTCCHVB_main.png?v=1775055391"},{"product_id":"ersccmdec","title":"ECS-RS Economic Manual Disk Electrode Cutter for Coin Cells, ERSCCMDEC","description":"\u003cp\u003eFor precise electrode disc preparation, the choice between a manual punch and an automated cutter depends on your throughput and the physical properties of your coated \"tapes.\" For coin cell assembly (CR2016, CR2025, CR2032), the edges must be perfectly burr-free to prevent internal short circuits.\u003c\/p\u003e\n\u003cp\u003eFor the manual disk electrode cutter, which uses a spring-loaded plunger and a hardened steel die to \"punch\" the disc out of the foil. The standard diameters are normally 12, 15, 16, 18, 19, and 20 mm dies. Typically, the cathode is cut to 14–15 mm and the anode to 15–16 mm to ensure complete coverage and account for slight misalignment during assembly. Compact to pneumatic or electric one, it can be transferred to the glovebox antechamber and no power is required for operation. \u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSCCMDEC (ERS-CC-MDEC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.005-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 25 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard cutting dies of \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eφ15 and φ19\u003c\/span\u003e are included in the package\u003c\/li\u003e\n\u003cli\u003eφ8～φ24, regular sizes of φ8,  φ10, φ12, φ14, φ15, φ16, φ19, and φ20 can be supplied quickly, while other sizes also can be provided with slightly long lead time. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlease select needed cutting die sizes when purchase the disk cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe alignment for pushing rod and bottom plate is critical. Normally the bottom plate should be loose until the pushing rod constantly goes through the hole smoothly. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL110 * W150 * H235 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47503534588134,"sku":"ERSCCMDEC","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSCCMDEC_main.png?v=1775089118"},{"product_id":"ersefmp","title":"ECS-RS Mechanical Pipette for Electrolyte Filling, ERSEFMP","description":"\u003cp\u003eFor precise electrolyte filling in battery research, the choice of pipetting tool depends on the viscosity of your electrolyte (e.g., standard LiPF6 in carbonates vs. thick ionic liquids) and whether you are working inside an argon-filled glovebox. Because electrolytes are often corrosive, volatile, and sensitive to moisture, standard laboratory pipettes require specific configurations to maintain accuracy and tool longevity.\u003c\/p\u003e\n\u003ctable style=\"width: 49.5\u0026lt;p\u0026gt;For precise electrolyte filling in battery research, the choice of pipetting tool depends on the viscosity of your electrolyte (e.g., standard LiPF6 in carbonates vs. thick ionic liquids) and whether you are working inside an argon-filled glovebox. Because electrolytes are often corrosive, volatile, and sensitive to moisture, standard laboratory pipettes require specific configurations to maintain accuracy and tool longevity.\u0026lt;\/p\u0026gt;\u0026lt;table style=;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117.637px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 675.363px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSEFMP (ERS-EF-MP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117.637px;\"\u003e\u003cem\u003ePipette Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 675.363px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.1 uL to 10 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117.637px;\"\u003e\u003cem\u003ePipette Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 675.363px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.1-2.5 uL\u003c\/li\u003e\n\u003cli\u003e0.5-10 uL\u003c\/li\u003e\n\u003cli\u003e2-20 uL\u003c\/li\u003e\n\u003cli\u003e5-50 uL\u003c\/li\u003e\n\u003cli\u003e10-100 uL\u003c\/li\u003e\n\u003cli\u003e20-200 uL\u003c\/li\u003e\n\u003cli\u003e50-200 uL\u003c\/li\u003e\n\u003cli\u003e100-1000 uL\u003c\/li\u003e\n\u003cli\u003e200-1000 uL\u003c\/li\u003e\n\u003cli\u003e1000-5000 uL\u003c\/li\u003e\n\u003cli\u003e2-10 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePipette Parameters\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSEFMP_02_480x480.png?v=1775091183\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.0121910jes\/meta\"\u003eF. J. Günter, et al., Influence of the Electrolyte Quantity on Lithium-Ion Cells, J. Electrochem. Soc., 2019, 166, A1709\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.1171902jes\/meta\"\u003eV. Murray, et al., A Guide to Full Coin Cell Making for Academic Researchers, J. Electrochem. Soc., 2019, 166, A329\u003c\/a\u003e.\u003c\/p\u003e","brand":"RSC","offers":[{"title":"0.1-2.5 uL","offer_id":47503622635750,"sku":"ERSEFMP01","price":99.0,"currency_code":"USD","in_stock":true},{"title":"0.5-10 uL","offer_id":47503622668518,"sku":"ERSEFMP02","price":99.0,"currency_code":"USD","in_stock":true},{"title":"2-20 uL","offer_id":47503622701286,"sku":"ERSEFMP03","price":99.0,"currency_code":"USD","in_stock":true},{"title":"5-50 uL","offer_id":47503622734054,"sku":"ERSEFMP04","price":99.0,"currency_code":"USD","in_stock":true},{"title":"10-100 uL","offer_id":47503622766822,"sku":"ERSEFMP05","price":99.0,"currency_code":"USD","in_stock":true},{"title":"20-200 uL","offer_id":47503622799590,"sku":"ERSEFMP06","price":99.0,"currency_code":"USD","in_stock":true},{"title":"50-200 uL","offer_id":47503622832358,"sku":"ERSEFMP07","price":99.0,"currency_code":"USD","in_stock":true},{"title":"100-1000 uL","offer_id":47503622865126,"sku":"ERSEFMP08","price":99.0,"currency_code":"USD","in_stock":true},{"title":"200-1000 uL","offer_id":47503622897894,"sku":"ERSEFMP09","price":99.0,"currency_code":"USD","in_stock":true},{"title":"1000-5000 uL","offer_id":47503622930662,"sku":"ERSEFMP10","price":99.0,"currency_code":"USD","in_stock":true},{"title":"2-10 mL","offer_id":47503622963430,"sku":"ERSEFMP11","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSEFMP_main.png?v=1775090574"},{"product_id":"esefepds","title":"ECS-S Electronic Pipette with Digital Screen for Electrolyte Filling, ESEFEPDS","description":"\u003cp\u003eFor precise electrolyte filling in battery research, the choice of pipetting tool depends on the viscosity of your electrolyte (e.g., standard LiPF6 in carbonates vs. thick ionic liquids) and whether you are working inside an argon-filled glovebox. Because electrolytes are often corrosive, volatile, and sensitive to moisture, standard laboratory pipettes require specific configurations to maintain accuracy and tool longevity.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESEFEPDS (ES-EF-EPDS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMagnetic charging (USB cable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_03_100x100.png?v=1775103895\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_04_160x160.png?v=1775104103\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePipette Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5 uL to 1 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePipette Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-10 uL\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10-200 uL\u003c\/li\u003e\n\u003cli\u003e30-300 uL\u003c\/li\u003e\n\u003cli\u003e50-1000 uL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eOperation Mode\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSample Transfer Mode (P-H)\u003c\/li\u003e\n\u003cli\u003eSample Homogenize Mode (P-Y)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDigital Screen \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_02_100x100.png?v=1775103821\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePipette Parameters\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_05_480x480.png?v=1775104856\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.0121910jes\/meta\"\u003eF. J. Günter, et al., Influence of the Electrolyte Quantity on Lithium-Ion Cells, J. Electrochem. Soc., 2019, 166, A1709\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.1171902jes\/meta\"\u003eV. Murray, et al., A Guide to Full Coin Cell Making for Academic Researchers, J. Electrochem. Soc., 2019, 166, A329\u003c\/a\u003e.\u003c\/p\u003e","brand":"MKSYS","offers":[{"title":"0.1-2.5 uL","offer_id":47505527275750,"sku":"ESEFEPDS01","price":199.0,"currency_code":"USD","in_stock":true},{"title":"10-200 uL","offer_id":47505527308518,"sku":"ESEFEPDS02","price":199.0,"currency_code":"USD","in_stock":true},{"title":"30-300 uL","offer_id":47505527341286,"sku":"ESEFEPDS03","price":199.0,"currency_code":"USD","in_stock":true},{"title":"50-1000 uL","offer_id":47505527374054,"sku":"ESEFEPDS04","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_main.png?v=1775103629"},{"product_id":"ersccmhc","title":"ECS-RS Economic Manual Hydraulic Crimper (CR20XX) for Coin Cells, ERSCCMHC","description":"\u003cp\u003eFor manual coin cell assembly, a hydraulic manual crimper is the standard \"workhorse\" for laboratory research. It uses a hand-pumped hydraulic jack to provide the high, uniform pressure needed to deform the coin cell gasket and create a gas-tight seal.\u003c\/p\u003e\n\u003cp\u003eThe critical specifications for the manual hydraulic crimper are: (1) \u003cstrong\u003eDie Compatibility\u003c\/strong\u003e: Most units come with a universal die for CR2016, CR2025, and CR2032. Optional dies are required for larger cells like CR2450 or CR3032. (2) \u003cstrong\u003eSealing Pressure\u003c\/strong\u003e: For CR20XX series cells, the recommended sealing pressure is typically 800–1000 psi (approximately 50–70 kg\/cm2). (3) \u003cstrong\u003ePTFE Anti-Corrosion Core\u003c\/strong\u003e: High-quality crimpers use a PTFE core to prevent the coin cell from short-circuiting against the steel die during the crimping process. (4) \u003cstrong\u003eWeight\u003c\/strong\u003e: If you plan to move the unit in and out of a glovebox frequently, look for \"Compact\" or \"Lite\" versions which weigh 12–25 kg, compared to standard versions which can reach 40 kg.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSCCMHC (ERS-CC-MHC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoin Cell Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA standard crimping die set for CR20XX is included.\u003c\/li\u003e\n\u003cli\u003eOptional die available from product option for crimping CR2325, CR2450, AG3, AG5\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCrimping Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. Pressure: 200 kg\/cm2\u003c\/li\u003e\n\u003cli\u003eFor CR20XX coin cell series, the recommended pressure is 80-100 kg\/cm2. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e20 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDe-crimping Die (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe De-crimping can be found here, which will be used to disassemble the coin cell for post-analysis. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_05_100x100.png?v=1774978301\" alt=\"\" style=\"float: none;\"\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_02_100x100.png?v=1774977964\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eOperation Environment\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe crimper should be placed inside a glovebox or a dryroom for operation due to electrolyte sensitivity. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL230 * W170 * H330 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~28 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ad2731\/meta\"\u003eC. Soulen, et al., Bridging the Gap Between Pouch and Coin Cell Electrochemical Performance in Lithium Metal Batteries, J. Electrochem. Soc., 2024, 171, 020535\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mdpi.com\/1996-1073\/15\/21\/7949\"\u003eP. M .Luc, et al., Reproducible Production of Lithium-Ion Coin Cells, Energies, 2022, 15, 7949\u003c\/a\u003e.\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47505613160678,"sku":"ERSCCMHC","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSCCMHC_main.png?v=1775107615"},{"product_id":"ersccpc","title":"ECS-RS Pneumatic Crimper (CR20XX) for Coin Cells, ERSCCPC","description":"\u003cp\u003eFor coin cell assembly inside a glovebox, a pneumatic crimper is often considered the optimal balance between the speed of an electric unit and the reliability of a manual hydraulic one. Since it uses compressed gas (Ar or N2) to drive the sealing die, it eliminates the risk of hydraulic oil leaks and the potential for electrical arcing in an Argon atmosphere.\u003c\/p\u003e\n\u003cp\u003eThe advantages compared to other types of crimpers are summarized below: (1) \u003cstrong\u003evs. Manual Hydraulic\u003c\/strong\u003e: No risk of oil leaking into your sensitive Argon environment. It is also significantly faster and less fatiguing for high-throughput batches. (2) vs. \u003cstrong\u003eElectric\u003c\/strong\u003e: Generally more robust and less susceptible to the \"arcing\" issues that some 24V DC motors face in high-purity Argon. (3) \u003cstrong\u003evs. Pneumatic-Hydraulic Hybrid\u003c\/strong\u003e: Pure pneumatic systems are lighter (typically 25–30 kg) and easier to pass through the glovebox antechamber.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSCCPC (ERS-CC-PC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoin Cell Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA standard crimping die set for CR20XX is included.\u003c\/li\u003e\n\u003cli\u003eOptional die available from product option for crimping CR2325, CR2450, AG3, AG5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCrimping Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. Pressure: 1 MPa (manually adjust the input gas pressure)\u003c\/li\u003e\n\u003cli\u003eFor CR20XX coin cell series, the recommended pressure is 0.7 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGlovebox Operation\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough is included for gas ventilation\u003c\/li\u003e\n\u003cli\u003eGas consumption amount\/each time is 490 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSCCPC_03_160x160.png?v=1775114870\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDe-crimping Die (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe De-crimping can be found here, which will be used to disassemble the coin cell for post-analysis. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_05_100x100.png?v=1774978301\"\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_02_100x100.png?v=1774977964\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL290 * W205 * H330 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~25 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ad2731\/meta\"\u003eC. Soulen, et al., Bridging the Gap Between Pouch and Coin Cell Electrochemical Performance in Lithium Metal Batteries, J. Electrochem. Soc., 2024, 171, 020535\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mdpi.com\/1996-1073\/15\/21\/7949\"\u003eP. M .Luc, et al., Reproducible Production of Lithium-Ion Coin Cells, Energies, 2022, 15, 7949\u003c\/a\u003e.\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47505646813414,"sku":"ERSCCPC","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSCCPC_main.png?v=1782151339"},{"product_id":"erscceccp","title":"ECS-RS Electric Crimper with Controllable Pressure in Touch-Screen for Coin Cells- ERSCCECCP","description":"\u003cp\u003eAn electric coin cell crimper is a significant upgrade over manual hydraulic versions. It provides the consistent sealing pressure required to minimize contact resistance and prevent electrolyte leakage, which is especially critical when testing sensitive materials like MXenes or sulfur-based cathodes.\u003c\/p\u003e\n\u003cp\u003eElectric crimpers offer several technical benefits: (1) \u003cstrong\u003ePrecision Control\u003c\/strong\u003e: You can set the exact sealing pressure (typically in metric tons or psi). This ensures every cell in a test series is identical. (2) \u003cstrong\u003eGas-Tight Integrity\u003c\/strong\u003e: Consistent pressure ensures the gasket is deformed perfectly every time, which is vital for long-term cycling or high-temperature tests. (3) \u003cstrong\u003eErgonomics\u003c\/strong\u003e: In high-throughput labs, manual pumping leads to fatigue and inconsistent sealing toward the end of a batch. (4) \u003cstrong\u003eGlovebox Compatibility\u003c\/strong\u003e: Most electric models are designed with a compact footprint and remote control boxes to fit inside argon-filled gloveboxes without taking up excessive space.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eETSCCECCP (ETS-CC-ECCP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 100 W \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eThe electrical motor is compatible with Ar gas environment in glovebox\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCrimping Dies\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne set of crimping die\u003ca href=\"http:\/\/www.mtixtl.com\/MSK-110DieSetReplacement-MSK-110-DS.aspx\"\u003e\u003c\/a\u003e for CR2032, CR2025, and CR2016 is included\u003c\/li\u003e\n\u003cli\u003eOptional die available from product option for crimping CR2325, CR2450, AG3, AG5. \u003c\/li\u003e\n\u003cli\u003eThe de-crimping dies, such as CR16, CR20, CR24, or CR30 is available upon request\u003c\/li\u003e\n\u003cli\u003eCoin cell crimping sequence:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0638\/4664\/6008\/files\/MSK-110-A-Positive_Assembling_Sequence_160x160.jpg?v=1737414414\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable pressure in touch screen.\u003c\/li\u003e\n\u003cli\u003eMax. 1200 kgf (recommend value is 700-800 kgf)\u003c\/li\u003e\n\u003cli\u003ePressure sensor resolution: ±0.5％ F.S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance during Crimping\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e20 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDe-crimping Die (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe De-crimping can be found here, which will be used to disassemble the coin cell for post-analysis. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e               \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_05_100x100.png?v=1774978301\"\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCMHC_02_100x100.png?v=1774977964\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL250*W185*H450mm (antechamber and glovebox compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~30 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eTo maintain the precision of an electric crimper:\u003c\/p\u003e\n\u003cp\u003e(1) \u003cstrong\u003eDie Cleaning\u003c\/strong\u003e: Electrolyte salts (especially LiPF6) are corrosive. If a cell leaks during crimping, the die must be cleaned immediately with ethanol or DI water to prevent pitting.\u003c\/p\u003e\n\u003cp\u003e(2) \u003cstrong\u003eCalibration\u003c\/strong\u003e: Periodically check the pressure sensor against a calibrated load cell to ensure the \"set\" pressure matches the \"actual\" force applied.\u003c\/p\u003e\n\u003cp\u003e(3) \u003cstrong\u003eGasket Alignment\u003c\/strong\u003e: Ensure the coin cell \"cup\" is centered in the die. Off-center crimping is the #1 cause of short circuits in newly assembled cells.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/app.jove.com\/t\/4104\/construction-and-testing-of-coin-cells-of-lithium-ion-batteries\"\u003eA. Kayyar, et al., Construction and Testing of Coin Cells of Lithium Ion Batteries, JOVE, DOI: 10.3791\/4104\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/11106.1629ecst\/meta\"\u003eK. S. Jiang, et al., How reliable is coin-cell-based ranking of Li anode Coulombic efficiency?, Joule, 2025, 9, 101963\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ol\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47506020532454,"sku":"ERSCCECCP","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSCCECCP_main.png?v=1782151573"},{"product_id":"ersecgchrp","title":"ECS-RS Gap-Control Hot Rolling Press (W100mm, 130°C) for Electrode Calendering, ERSECGCHRP","description":"\u003cp\u003eFor high-precision electrode calendering, transitioning from simple gap-control (setting the distance between rollers) to pressure-control is the key to achieving consistent energy density and ionic conductivity. In a pressure-controlled system, the machine uses hydraulic or servo-actuators to apply a specific, measurable force (typically in metric tons) regardless of slight variations in the initial coating thickness.\u003c\/p\u003e\n\u003cp\u003eWhen using a pressure-control press, your goal is to optimize the Packing Density (PD) = m\/(A*t). Where m is the mass of active material, A is the area, and t is the post-calendering thickness. (1) \u003cstrong\u003e10% Rule\u003c\/strong\u003e: For most lithium-ion cathodes (NMC\/LFP), aim for a thickness reduction of approximately 10–20% per pass. Attempting more can cause \"spring-back\" or delamination. (2) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: Calendering at 60-100 °C reduces the yield strength of the PVDF binder, allowing for higher density at lower pressures and reducing the risk of foil cracking. (3) \u003cstrong\u003eLinear Pressure\u003c\/strong\u003e: In production, pressure is often reported as N\/mm (force divided by the width of the electrode). Lab machines that report total \"Tons\" should be converted to linear pressure for academic reporting.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSECGCHRP (ERS-EC-GCHRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHot Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ96 x 100 mm (effective width for hot rolling: 80-90 mm)\u003c\/li\u003e\n\u003cli\u003eRoller is made of Cr12Mo1V1 and surface plated with Cr layer\u003c\/li\u003e\n\u003cli\u003eSurface Hardness: HRC62, surface coating thickness: ≥10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRolling Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 130 \u003cspan\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-40 mm\/s, digital display, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-2.0 mm, manually adjust\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRoll-to-Roll Integration (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA roll-to-roll unit can be integrated with the hot rolling press for electrode roll calendering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSECGCHRP_02_01_100x100.png?v=1775757331\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL670 * W225 * H300 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process, Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47506853986534,"sku":"ERSECGCHRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSECGCHRP_main_01.png?v=1782234261"},{"product_id":"ersbpedvo","title":"ECS-RS Vacuum Oven (250°C, 50 L) for Battery Powder and Electrode Drying, ERSBPEDVO","description":"\u003cp\u003eIn battery research, a vacuum oven is critical for removing trace moisture from powders (active materials) and electrodes (coated foils) without causing oxidation. For lithium-ion systems, the goal is typically to achieve moisture levels below 50 ppm for electrodes and below 10 ppm for finished cells.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSBPEDVO (ERS-BPED-VO)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1400 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTemperature Range\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 250 °C (resolution: ±0.5℃)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e≤-0.1 MPa (≤133 Pa) (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ethe vacuum pump is not included, which should be additionally purchased\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003ePlease consider the vacuum pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL415 * W345* H370 mm\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Material\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSS304 (2 shelves included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eChamber Door\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eToughened Bulletproof Double Glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL710 * W560 * H550 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/chemistry-europe.onlinelibrary.wiley.com\/doi\/full\/10.1002\/batt.202100088\"\u003eF. Huttner, et al., Design of Vacuum Post-Drying Procedures for Electrodes of Lithium-Ion Batteries, Batteries \u0026amp; Supercaps, 2021, 4, 1499-1515\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591020306690\"\u003eF. Zhao, et al., A novel online moisture monitoring method for vacuum drying of lithium ion battery powder, Powder Technology, 2020, 375, 244-248\u003c\/a\u003e.\u003c\/p\u003e","brand":"TOB","offers":[{"title":"Default Title","offer_id":47506980143334,"sku":"ERSBPEDVO","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSBPEDVO_main.png?v=1782235255"},{"product_id":"essvsf","title":"ECS-SS Vacuum Slurry Filter (500mL or 2L), ESSVSF","description":"\u003cp\u003eFor laboratory battery research, a vacuum slurry filter is used immediately after mixing to remove agglomerates, undissolved gels, and extraneous particles. This ensures a \"narrow\" particle size distribution, which is critical for achieving a uniform, defect-free coating on your current collectors.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSVSF (ESS-VSF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 5-12 W\u003c\/li\u003e\n\u003cli\u003eA DC12V converter is included. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry Tank Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTank material is made of SS304\u003c\/li\u003e\n\u003cli\u003eCapacity has two versions: 750 mL and 2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMesh Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMesh 100 and 200 are included.\u003c\/li\u003e\n\u003cli\u003eMesh 150, 250, 300, 400, and 500 are available upon request. \u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e-65 KPa (a small dry-air vacuum pump is included.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL150 * W150 * H200 mm for 500 mL version\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eL150 * W150* H200 mm for 500 mL version for 2 L version\u003c\/li\u003e\n\u003cli\u003eVacuum pump size: L140 * W70* H150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL710 * W560 * H550 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~4 kg for 500 mL version\u003c\/li\u003e\n\u003cli\u003e~7 kg for 2 L version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/0957-4484\/20\/23\/235203\/meta\"\u003eJ. H. Lee, et al., Tin nanoparticle thin film electrodes fabricated by the vacuum filtration method for enhanced battery performance, Nanotechnology, 2009, 20, 235203\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.iecr.3c03586\"\u003eM. H. Jeong, et al., High-Speed Li-Ion Battery Manufacturing Process Applying the Dewatering Concept, Ind. Eng. Chem. Res. 2024, 63, 10, 4408–4419\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"500 mL","offer_id":47507923960038,"sku":"ESSVSF500","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"2 L","offer_id":47507923992806,"sku":"ESSVSF2000","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSVSF_main.png?v=1775176470"},{"product_id":"emscggps","title":"ECS-M Single-Chamber Glovebox with Gas Purification System (O2\/H2O \u003c1 ppm), EMSCGGPS","description":"\u003cp\u003eFor battery research and air-sensitive chemistry, a single-chamber glovebox is the standard workstation. It provides a controlled, inert atmosphere (typically Argon or Nitrogen) to keep moisture (H2O) and oxygen (O2) levels below 1 ppm. This ultra-dry, inert environment (typically Argon) is non-negotiable for handling lithium metal, specialized electrolytes (like LiPF6), and moisture-sensitive solid-state materials.\u003c\/p\u003e\n\u003cp\u003eWhen selecting a single-station glovebox for electrochemical research, the following configurations are standard: (1) \u003cstrong\u003eAtmosphere Control\u003c\/strong\u003e: Integrated purification column (Copper catalyst for O2 and Molecular Sieve for H2O) with a circulation blower. (2) \u003cstrong\u003eMaterial\u003c\/strong\u003e: 304 Stainless Steel chamber with a tempered glass or polycarbonate front window. Avoid acrylic if you are using solvents like NMP, as they can craze the plastic over time. (3) \u003cstrong\u003eAntechambers\u003c\/strong\u003e: A large cylindrical antechamber (e.g., Φ360 * 600 mm) for equipment like coaters or crimpers, and a mini-antechamber (Φ150 * 300 mm) for rapid sample and tool transfer. (4) \u003cstrong\u003eSolvent Trap\u003c\/strong\u003e: Essential if you are doing any electrolyte filling or coating. This prevents electrolyte vapors (DMC, DEC, EC) from poisoning the purification catalyst.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEMSCGGPS (EM-SCGGPS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 1500 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eBox Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eInner Dimension: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eL1220 x D750 x H900 mm (For dual-side operation, the depth is 1000 mm)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBox Frame: SS304, 3mm thickness \u003c\/li\u003e\n\u003cli\u003eFront Glass Door: 8mm\u003c\/li\u003e\n\u003cli\u003eButyl Gloves, thickness of 0.4 mm, D=7-8\"\u003c\/li\u003e\n\u003cli\u003eFilters: 0.3 um, one at gas inlet and one at the gas outlet\u003c\/li\u003e\n\u003cli\u003eTwo layers of shelves with adjustable height\u003c\/li\u003e\n\u003cli\u003eLED light inside and multiple DN40KF ports at backside. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EMSCGGPS_02_100x100.png?v=1777371170\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EMSCGGPS_03_100x100.png?v=1777371170\" alt=\"\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EMDCGGPS_03_100x100.png?v=1777398069\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePurification System\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003ePurification Materials: 5 kg Cu catalyst and 5 kg molecular sieve. \u003c\/li\u003e\n\u003cli\u003ePurification Capacity: 60 L O2 and 2 kg H2O\u003c\/li\u003e\n\u003cli\u003eO2 \u0026amp; H2O level: ＜1ppm (O2 measure level: 0-1000 cP, while H2O measure level: 500 cP)\u003c\/li\u003e\n\u003cli\u003eCirculation Capacity: integrated blower flow: 90m³\/h (even large one with 145 m³\/h and 180 m³\/h can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003ePLC controlled regeneration with 5%H2\/Ar\u003c\/li\u003e\n\u003cli\u003eVacuum pump with a flow rate of 12 m3\/h (included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eTransfer Chamber\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eLarge antechamber size: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eD=360 mm, L=600 mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eSmall transfer chamber size: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eD=150 mm, L=300 mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eSliding Tray is available on both transfer chamber\u003c\/li\u003e\n\u003cli\u003eA vacuum gauge is available for pressure display. \u003c\/li\u003e\n\u003cli\u003eThe rectangular transfer chamber is available upon request. The size for small and large transfer chambers are 120*150 mm and 250*300 mm, respectively. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EMDCGGPS_04_100x100.png?v=1777398372\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Function (\u003cspan\u003eOptional\u003c\/span\u003e): The heating unit with a maximum heating temperature of\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e 200°C\u003c\/span\u003e can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eControl System\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSiemens PLC touch screen\u003c\/li\u003e\n\u003cli\u003eFoot pedal to adjust the box pressure\u003c\/li\u003e\n\u003cli\u003eData recording and can be log out for analysis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1820 * W750 * H1810mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~700-800 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.202500591\"\u003eP. Ayyanusamy, et al., Real-Time Phase Monitoring of Solid-State Electrolytes: A Glovebox-Integrated In Situ Wide-Angle X-Ray Scattering, Energy Technology, 2025 ,13, 2500591\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/chemistry-europe.onlinelibrary.wiley.com\/doi\/full\/10.1002\/celc.202101161\"\u003eD. Martín-Yerga, et al., Scanning Electrochemical Cell Microscopy in a Glovebox: Structure-Activity Correlations in the Early Stages of Solid-Electrolyte Interphase Formation on Graphite, ChemElectroChem, 2021, 8, 4240-4251\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"MIKROUNA","offers":[{"title":"Singe-Side One Station","offer_id":47584595902694,"sku":"EMSCGGPSSS","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Dual-Side Two Stations","offer_id":47584595935462,"sku":"EMSCGGPSDS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EMSCGGPS_main.png?v=1775203968"},{"product_id":"esmpcpesc","title":"ECS-SM Pneumatic Electrode Sheet Cutter (L200mm x W200mm) for Pouch Cells, ESMPCPESC","description":"\u003cp\u003eFor high-throughput pouch cell production, a pneumatic pouch cell cutter (also known as a pneumatic die cutting machine) is used to precisely cut the rectangular shapes from coated electrode sheets. Unlike coin cell cutters, which use simple circular dies, pouch cell cutters must handle larger areas and provide specific tabs for current collection.\u003c\/p\u003e\n\u003cp\u003eThe key features of pneumatic pouch cell cutter are: (1) \u003cstrong\u003ePrecision Die Sets\u003c\/strong\u003e: These machines use specialized \"male-female\" die sets made of hardened tungsten steel or Cr12MoV. This ensures the edges are burr-free (\u0026lt;15 um), which is critical to prevent internal short circuits in stacked or folded pouch cells. (2) \u003cstrong\u003ePneumatic Actuation\u003c\/strong\u003e: By using compressed air (typically 0.5–0.8 MPa), the cutter provides a consistent, high-velocity vertical force that is far superior to manual lever-arm cutters for repeatability. (3) \u003cstrong\u003eSafety Interlocks\u003c\/strong\u003e: Most professional units feature a light curtain or a dual-button start system to ensure the operator's hands are clear of the cutting zone. (4) \u003cstrong\u003eGlovebox Compatibility\u003c\/strong\u003e: Many models are designed with a compact footprint to be placed inside an argon-filled glovebox for cutting moisture-sensitive anodes or specialized solid-state electrolytes.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMPCPESC (ESM-PC-PESC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 60 W\u003c\/li\u003e\n\u003cli\u003eA DC24V adaptor is included \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Force\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 3 T\u003c\/li\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) with 60-80 psi is required for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003cli\u003eVertical Bur: ≤12μm, Horizontal Bur: ≤20μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_02_100x100.png?v=1774909824\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard cutting dies: 58mm*45mm for anode, and 56mm*43mm for cathode.\u003c\/li\u003e\n\u003cli\u003eFor any customization, please indicate the following parameters:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_100x100.png?v=1774910247\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1-to-2 is normally recommended, but the maximum is 1-to-8 pieces. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCPESC_02_100x100.png?v=1775235254\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time. \u003c\/li\u003e\n\u003cli\u003eIf customer want to place the die cutter into glovebox for cutting H2O\/O2 sensitive materials, a glovebox-compatible version is available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCPESC_03_100x100.png?v=1775235766\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCPESC_04_100x100.png?v=1775236044\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL710 * W540 * H830 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~210 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47508899987686,"sku":"ESMPCPESC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCPESC_main.png?v=1775234751"},{"product_id":"eslpcpesc","title":"ECS-SL Pneumatic Electrode Sheet Cutter (L380mm x W250mm) for Pouch Cells, ESLPCPESC","description":"\u003cp\u003eFor high-throughput pouch cell production, a pneumatic pouch cell cutter (also known as a pneumatic die cutting machine) is used to precisely cut the rectangular shapes from coated electrode sheets. Unlike coin cell cutters, which use simple circular dies, pouch cell cutters must handle larger areas and provide specific tabs for current collection.\u003c\/p\u003e\n\u003cp\u003eThe key features of pneumatic pouch cell cutter are: (1) \u003cstrong\u003ePrecision Die Sets\u003c\/strong\u003e: These machines use specialized \"male-female\" die sets made of hardened tungsten steel or Cr12MoV. This ensures the edges are burr-free (\u0026lt;15 um), which is critical to prevent internal short circuits in stacked or folded pouch cells. (2) \u003cstrong\u003ePneumatic Actuation\u003c\/strong\u003e: By using compressed air (typically 0.5–0.8 MPa), the cutter provides a consistent, high-velocity vertical force that is far superior to manual lever-arm cutters for repeatability. (3) \u003cstrong\u003eSafety Interlocks\u003c\/strong\u003e: Most professional units feature a light curtain or a dual-button start system to ensure the operator's hands are clear of the cutting zone. (4) \u003cstrong\u003eGlovebox Compatibility\u003c\/strong\u003e: Many models are designed with a compact footprint to be placed inside an argon-filled glovebox for cutting moisture-sensitive anodes or specialized solid-state electrolytes.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLPCPESC (ESL-PC-PESC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 10 W \u003c\/li\u003e\n\u003cli\u003eA DC24V adaptor is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Force\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 5 T (adjustable)\u003c\/li\u003e\n\u003cli\u003eA gas compressor (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNot Included\u003c\/strong\u003e\u003c\/span\u003e) with 60-80 psi is required for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003cli\u003eVertical Bur: ≤12μm, Horizontal Bur: ≤20μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eNo standard cutting die is included, customer should provide the electrode drawing for making the cutting die. \u003c\/li\u003e\n\u003cli\u003eFor any customization, please indicate the following parameters: \u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_100x100.png?v=1774910247\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e1-to-X is available upon request (we will evaluate the X numbers based on the individual electrode size)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eGas Compressor (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor pneumatic operation of the die cutter, a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSafety Feature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIR sensors were built-in for door safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time.    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL580 * W480 * H1120 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~299 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47508923220198,"sku":"ESLPCPESC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLPCPESC_main.png?v=1775237939"},{"product_id":"esspcbas","title":"ECS-SS Benchtop Automatic Stacker (L100mm x W90mm) for Pouch Cells, ESSPCBAS","description":"\u003cp\u003eFor pouch cell research, an automatic stacking machine is the most critical tool for transitioning from single-layer prototypes to multi-layer high-energy cells. These machines automate the precise \"Z-fold\" layering of cathodes, anodes, and separators, ensuring the alignment and tension required for high-performance electrochemical testing. The separator is supplied as a continuous web from a tension-controlled roll, while pre-cut anode and cathode sheets are inserted into the folds from opposite sides. This creates a compact, interconnected stack that is superior to simple manual layering.\u003c\/p\u003e\n\u003cp\u003eAs for the sheet-type solid-state electrolyte, a piece-by-piece stacking machine is able to continuously pick up the electrode and electrolyte to assemble a multiple-layer solid-state pouch cell.   \u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCBAS (ESS-PC-BAS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, 50\/60Hz, 400 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eAcceptable Electrode Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe standard stacking die size is L62mm*W46mm (anode: 58*45mm, cathode: 56*43mm, separator width is 60 mm)\u003c\/li\u003e\n\u003cli\u003eL: 40-110 mm, W 40-90 mm (tab is not included). Normally a max tab length is 15 mm\u003c\/li\u003e\n\u003cli\u003eAny customized electrodes are supposed to disclose the electrode\/tab size and layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_100x100.png?v=1774910247\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eStacking Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStacking Mode: Regular \u003cstrong\u003eZ-fold\u003c\/strong\u003e or \u003cstrong\u003eLayer-by-Layer stacking\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e           \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_02_100x100.png?v=1775241692\"\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_03_100x100.png?v=1775241692\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor hybrid Z-folding and layer-by-layer pouch cell stacker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_06_160x160.png?v=1775244610\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. stacking layers: 100\u003c\/li\u003e\n\u003cli\u003eMax. stacking cell thickness: 15 mm\u003c\/li\u003e\n\u003cli\u003eStacking alignment accuracy: ±0.3 mm\u003c\/li\u003e\n\u003cli\u003eStacking Speed: 4-6 s\/layer\u003c\/li\u003e\n\u003cli\u003eA vacuum pump is built-in for sucking electrodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLoading Separator Roll\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCardboard core size: 3\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. Roll diameter: 250 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSafety Feature (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn acrylic frame cover \u0026amp; door can be customized to improve operation safety.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen the stacker is placed inside a dryroom or regular room, a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank with second-stage regulator is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.   \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL790 * W610 * H720 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~120 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0007850612001035\"\u003eJ. Kurfer, et al., Production of large-area lithium-ion cells – Preconditioning, cell stacking and quality assurance, CIRP Annals, 2012, 61, 1-4\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2017\/sc\/c8ee00546j\/unauth\"\u003eB. Evanko, et al., Stackable bipolar pouch cells with corrosion-resistant current collectors enable high-power aqueous electrochemical energy storage, Energy Environ. Sci., 2018,11, 2865-2875\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Regular Z-fold","offer_id":47509287141606,"sku":"ESSPCBASZ","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Hybrid Z-fold + Layer-by-Layer","offer_id":47509287174374,"sku":"ESSPCBASH","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_main.png?v=1775244469"},{"product_id":"esmhas","title":"ECS-SM Hybrid Automatic Stacker (L200mm x W150mm) for Pouch Cells, ESMHAS","description":"\u003cp\u003eFor pouch cell research, an automatic stacking machine is the most critical tool for transitioning from single-layer prototypes to multi-layer high-energy cells. These machines automate the precise \"Z-fold\" layering of cathodes, anodes, and separators, ensuring the alignment and tension required for high-performance electrochemical testing. The separator is supplied as a continuous web from a tension-controlled roll, while pre-cut anode and cathode sheets are inserted into the folds from opposite sides. This creates a compact, interconnected stack that is superior to simple manual layering.\u003c\/p\u003e\n\u003cp\u003eAs for the sheet-type solid-state electrolyte, a piece-by-piece stacking machine is able to continuously pick up the electrode and electrolyte to assemble a multiple-layer solid-state pouch cell.   \u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMHAS (ESM-HAS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 400 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eAcceptable Electrode Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 100-200 mm, W 50-150 mm (tab is not counted). Normally a max tab length is 15 mm\u003c\/li\u003e\n\u003cli\u003eAny customized electrodes are supposed to disclose the electrode\/tab size and layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_100x100.png?v=1774910247\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eStacking Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStacking Mode: Regular \u003cstrong\u003eZ-fold\u003c\/strong\u003e or \u003cstrong\u003eLayer-by-Layer stacking\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e           \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_02_100x100.png?v=1775241692\"\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_03_100x100.png?v=1775241692\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor hybrid Z-folding and layer-by-layer pouch cell stacker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMHAS_02_160x160.png?v=1775251380\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. stacking layers: ~200\u003c\/li\u003e\n\u003cli\u003eMax. stacking cell thickness: 15 mm\u003c\/li\u003e\n\u003cli\u003eStacking alignment accuracy: ±0.3 mm\u003c\/li\u003e\n\u003cli\u003eStacking Speed: 4-6 s\/layer\u003c\/li\u003e\n\u003cli\u003eA vacuum pump is built-in for sucking electrodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLoading Separator Roll\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCardboard core size: 3\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. Roll diameter: 250 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSafety Feature (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn acrylic frame cover \u0026amp; door can be customized to improve operation safety.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.   \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1220 * W610 * H720 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~180 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0007850612001035\"\u003eJ. Kurfer, et al., Production of large-area lithium-ion cells – Preconditioning, cell stacking and quality assurance, CIRP Annals, 2012, 61, 1-4\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2017\/sc\/c8ee00546j\/unauth\"\u003eB. Evanko, et al., Stackable bipolar pouch cells with corrosion-resistant current collectors enable high-power aqueous electrochemical energy storage, Energy Environ. Sci., 2018,11, 2865-2875\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47509310996710,"sku":"ESMHAS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMHAS_main.png?v=1775252011"},{"product_id":"espcuwtsc","title":"ECS-S Ultrasonic Welder (800-6000W) with Touch Screen Controller for Pouch Cells, ESPCUWTSC","description":"\u003cp\u003eFor high-precision pouch cell assembly, an ultrasonic metal welder with a PLC touch screen controller is the standard for welding the current collector tabs (Al and Cu) to the multi-layer electrode stacks. Unlike manual or basic models, a touch screen interface allows you to program and save specific \"recipes\" for different layer counts, ensuring consistent bond strength without tearing the fragile foils.\u003c\/p\u003e\n\u003cp\u003eThe advantage of the touch screen controller: (1) \u003cstrong\u003eRecipe Management\u003c\/strong\u003e: The specific parameters can be saved for \"10-layer NMC\" or \"20-layer LFP,\" allowing different researchers to achieve identical weld quality. (2) \u003cstrong\u003eQuality Monitoring\u003c\/strong\u003e: The screen displays the welding curve (Power vs. Time). A sudden spike or dip can indicate a misaligned tab or a dirty welding horn. (3) \u003cstrong\u003eSelf-Diagnostics\u003c\/strong\u003e: Modern controllers will alert you if the air pressure is too low or if the ultrasonic transducer is overheating, preventing damage to the equipment.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESPCUWTSC800 (ES-PC-UWTSC800)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESPCUWTSC3000 (ES-PC-UWTSC3000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESPCUWTSC6000 (ES-PC-UWTSC6000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 800 W\u003c\/li\u003e\n\u003cli\u003eAC110V and AC220V can be switched in control box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single-phase, 50\/60Hz, 3000 W\u003c\/li\u003e\n\u003cli\u003eAC110V and AC220V can be switched in control box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC380V±10%, three phases, 50\/60Hz, 6000 W\u003c\/li\u003e\n\u003cli\u003e(AC220V±10%, three phases can be customized upon request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eWelding Heads\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Head Shape: Cross, single-point\u003c\/li\u003e\n\u003cli\u003eWelding Area: 3*6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESPCUWTSC_02_100x100.png?v=1775257476\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA customized welding head with various shapes and area can be supplied upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Head Shape: Axe-type, two-sides\u003c\/li\u003e\n\u003cli\u003eWelding Area: 4*8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESPCUWTSC_03_100x100.png?v=1775258226\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA customized welding head with various shapes and area can be supplied upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Head Shape: Axe-type, two-sides\u003c\/li\u003e\n\u003cli\u003eWelding Area: 4*12 mm\u003c\/li\u003e\n\u003cli\u003eA customized welding head with various shapes and area can be supplied upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003eWelding Power\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50-800W (0-100% Amplitude)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50-3000W (0-100% Amplitude)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50-6000W (0-100% Amplitude)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eWelding Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026lt;0.4 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026lt;0.4 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026lt;1.0 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eWelding Layers\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 20 layers (0.1 mm Al tab with 16 um Al foil or 0.1 mm Ni tab with 9 um Cu foil)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 40 layers (0.1 mm Al tab with 16 um Al foil or 0.1 mm Ni tab with 9 um Cu foil)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 70 layers (0.1 mm Al tab with 16 um Al foil or 0.1 mm Ni tab with 9 um Cu foil)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eGas Pressure Source\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Part: L570 * W320 * H300 mm\u003c\/li\u003e\n\u003cli\u003eController: L530 * W200 * H380 mm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Part: L570 * W320 * H300 mm\u003c\/li\u003e\n\u003cli\u003eController: L530 * W200 * H380 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Part: L570 * W320 * H300 mm\u003c\/li\u003e\n\u003cli\u003eController: L570 * W40 * H500 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~53 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~58 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~60 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2352152X15000055\"\u003eM. J. Brand , et al., Welding techniques for battery cells and resulting electrical contact resistances, Journal of Energy Storage, 2015, 1, 7-14\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.e-jwj.org\/journal\/view.php?doi=10.5781\/JWJ.2023.41.6.6\"\u003eM. Kim, et al., Review on Ultrasonic and Laser Welding Technologies of Multi-Layer Thin Foils for the Lithium-Ion Pouch Cell Manufacturing, Journal of Welding and Joining 2023; 41(6): 462-474\u003c\/a\u003e..\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"800 W","offer_id":47510124724454,"sku":"ESPCUWTSC800","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"3000 W","offer_id":47510124757222,"sku":"ESPCUWTSC3000","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"6000 W","offer_id":47510124789990,"sku":"ESPCUWTSC6000","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESPCUWTSC_main.png?v=1775254966"},{"product_id":"esauwh800","title":"ECS-S 800W Ultrasonic Welding Heads (ESPCUWTSC800), ESAUWH800","description":"\u003cp\u003eFor pouch cell and battery tab welding, the ultrasonic welding head (comprising the horn\/sonotrode and the anvil) is the most critical consumable. Because battery materials like copper and aluminum have different hardness levels and thicknesses, the \"knurling\" pattern (the teeth on the head) must be specifically matched to the application to ensure a robust molecular bond without tearing the foil.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESAUWH800 (ES-A-UWH800)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eWelding Head Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Cross-Type, Single Rectangle (Four-Side)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e                (a) 4mm * 4mm\u003c\/p\u003e\n\u003cp\u003e                  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH800-01_100x100.png?v=1775284178\" alt=\"\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003cp\u003e                 (b) 3mm * 6mm  \u003c\/p\u003e\n\u003cp\u003e                  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH800-02_100x100.png?v=1775284178\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e                 (c) 6mm * 3mm\u003c\/p\u003e\n\u003cp\u003e                  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH800-03_100x100.png?v=1775284178\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Axe-Type, Single Rectangle (Two-Side), 4*15 mm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e                \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH800-04_100x100.png?v=1775319932\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Hoe-Type, Single Rectangle (Two-Side), 3*5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e               \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH800-05_100x100.png?v=1775320174\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Square-Type (Four-Side), \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eFor Cylindrical Electrodes\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e                (a)  Single Long Strip, 3*25 mm\u003c\/p\u003e\n\u003cp\u003e                \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH800-06_100x100.png?v=1775321123\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e               (b)  Three Points at Each Side, 3*3 mm\u003c\/p\u003e\n\u003cp\u003e               \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH800-07_100x100.png?v=1775321435\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col class=\"cus-ref-zone__list\"\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2352152X15000055\" target=\"_blank\"\u003eM. J. Brand , et al., Welding techniques for battery cells and resulting electrical contact resistances, Journal of Energy Storage, 2015, 1, 7-14\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.e-jwj.org\/journal\/view.php?doi=10.5781\/JWJ.2023.41.6.6\" target=\"_blank\"\u003eM. Kim, et al., Review on Ultrasonic and Laser Welding Technologies of Multi-Layer Thin Foils for the Lithium-Ion Pouch Cell Manufacturing, Journal of Welding and Joining 2023; 41(6): 462-474\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"Cross-Type Single Rectangle (Four-Side) 4mm*4mm","offer_id":47510836609254,"sku":"ESAUWH800C44","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Cross-Type Single Rectangle (Four-Side) 3mm*6mm","offer_id":47510836642022,"sku":"ESAUWH800C36","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Cross-Type Single Rectangle (Four-Side) 6mm*3mm","offer_id":47510836674790,"sku":"ESAUWH800C63","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Axe-Type Single Rectangle (Two-Side) 4*15 mm","offer_id":47510840279270,"sku":"ESAUWH800A415","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Hoe-Type Single Rectangle (Two-Side) 3*5 mm","offer_id":47510840312038,"sku":"ESAUWH800H35","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Square-Type Long Strip (Four-Side) 3*25 mm","offer_id":47510983704806,"sku":"ESAUWH800S325","price":699.0,"currency_code":"USD","in_stock":true},{"title":"Square-Type Three Points (Four-Side) 3*3 mm","offer_id":47510983737574,"sku":"ESAUWH800S33","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH800-03.png?v=1775284178"},{"product_id":"esauwh3000","title":"ECS-S 3000W Ultrasonic Welding Heads (ESPCUWTSC3000), ESAUWH3000","description":"\u003cp\u003eFor pouch cell and battery tab welding, the ultrasonic welding head (comprising the horn\/sonotrode and the anvil) is the most critical consumable. Because battery materials like copper and aluminum have different hardness levels and thicknesses, the \"knurling\" pattern (the teeth on the head) must be specifically matched to the application to ensure a robust molecular bond without tearing the foil.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESAUWH3000 (ES-A-UWH3000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eWelding Head Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Cross-Type, Single Rectangle (Four-Side), 3*6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH3000-01_100x100.png?v=1775328821\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Horn-Type, Single Rectangle (Two-Side)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e               (a) Horizontal Orientation, 3*6 mm\u003c\/p\u003e\n\u003cp\u003e                \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH3000-02_100x100.png?v=1775329075\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e               (b) Vertical Orientation, 6*3 mm\u003c\/p\u003e\n\u003cp\u003e               \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH3000-03_100x100.png?v=1775329846\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Square-Type, Long Strip (Two-Side), 3*25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e               \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH3000-04_100x100.png?v=1775330053\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col class=\"cus-ref-zone__list\"\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2352152X15000055\" target=\"_blank\"\u003eM. J. Brand , et al., Welding techniques for battery cells and resulting electrical contact resistances, Journal of Energy Storage, 2015, 1, 7-14\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.e-jwj.org\/journal\/view.php?doi=10.5781\/JWJ.2023.41.6.6\" target=\"_blank\"\u003eM. Kim, et al., Review on Ultrasonic and Laser Welding Technologies of Multi-Layer Thin Foils for the Lithium-Ion Pouch Cell Manufacturing, Journal of Welding and Joining 2023; 41(6): 462-474\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"SZKJ","offers":[{"title":"Cross-Type Single Rectangle (Four-Side) 3mm*4mm","offer_id":47511125786854,"sku":"ESAUWH3000C34","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Horn-Type Horizontal Rectangle (Two-Side) 3*6 mm","offer_id":47511125917926,"sku":"ESAUWH3000HH36","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Horn-Type Vertical Rectangle (Two-Side) 6*3 mm","offer_id":47511125950694,"sku":"ESAUWH3000HV63","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Square-Type Long Strip (Two-Side) 3*25 mm","offer_id":47511125983462,"sku":"ESAUWH3000S325","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESAUWH3000-01.png?v=1775328821"},{"product_id":"esspcppfm","title":"ECS-SS Pneumatic Pouch Forming Machine (L80mm x W65mm) for Pouch Cells, ESSPCPPFM","description":"\u003cp\u003eIn pouch cell fabrication, a pneumatic pouch forming machine is used to punch the \"cup\" or \"pit\" into Aluminum Laminated Film (ALF). This cup holds the electrode stack and electrolyte. Pneumatic models are the standard for laboratory R\u0026amp;D because they are cleaner, more compact, and require less maintenance than hydraulic systems, making them ideal for use inside a dry room or glovebox.\u003c\/p\u003e\n\u003cp\u003eThe distinct features of the pneumatic pouch forming machine: (1) \u003cstrong\u003eAdjustable Pressure\u003c\/strong\u003e: The pressure can be fine-tuned so it is high enough to form the cup but not so high that it shears the aluminum layer. (2) \u003cstrong\u003ePunching Speed\u003c\/strong\u003e: Pneumatic cylinders provide a fast, consistent stroke that often yields cleaner corners than slow manual lever punches. (3) \u003cstrong\u003eDie Quality\u003c\/strong\u003e: High-end suppliers use R-angle (rounded) corners on the punch to distribute stress during the drawing process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking Mechanism Diagram\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_02_240x240.png?v=1775335272\" alt=\"\"\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCPPFM (ESS-PC-PPFM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003ePunching Die Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dual-Holes, Fold, Air Bag, L40*W35mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_03_160x160.png?v=1775335913\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eA≤160mm, B≤125mm, C≤80mm, D≤65mm, E≤50mm, H≤6mm\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Single-Hole, Fold, Air Bag, L61*W47mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_04_160x160.png?v=1775335913\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eA≤160mm, B≤125mm, C≤61mm, D≤47mm, E≤50mm, H≤6mm\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Single-Hole, Four-Side Sealing, Air Bag, L80*W35mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_05_160x160.png?v=1775335913\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eA≤160mm, B≤125mm, C≤80mm, D≤35mm, E≤50mm, H≤6mm \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Single-Hole, Four-Side Sealing, No Air Bag, L80*W65mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_06_160x160.png?v=1775335913\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe standard punching die for making 46mm*62mm (single hole, fold, no air bag) is included for making 4662 pouch cell, which is matched with anode (58mm*45mm) and cathode (56mm*43mm). \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003ePunching Depth\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe punching depth can be adjustable by replacing blocking dies with various height. \u003c\/li\u003e\n\u003cli\u003eThere are standard blocking dies for making pouch cell case with depth of 3 mm, 4 mm, 5 mm, and 6 mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_07_160x160.png?v=1775338072\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOther customized blocking die set for depth of 1 mm, 2.5 mm, 3.5 mm, 4.5 mm, and 5.5 mm are also available here. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003ePouch Cell Case\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum laminated film for feeding material can be found here: \u003ca href=\"https:\/\/echemsupplies.com\/products\/cpccalfs?variant=47049435873510\"\u003eCPCCALFS\u003c\/a\u003e, \u003ca href=\"https:\/\/echemsupplies.com\/products\/cpccalfr?variant=47049067462886\"\u003eCPCCALFR\u003c\/a\u003e, \u003ca href=\"https:\/\/echemsupplies.com\/products\/cpccalfrdnp?variant=47049343893734\"\u003eCPCCALFRDNP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) or a gas tank is required to provide 80-110 psi to support the pneumatic operation. \u003c\/li\u003e\n\u003cli\u003eFor 5mm and 6mm punching depth, at least 95 psi is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL370 * W245 * H236 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~45 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775325015824\"\u003eC. Moon, et al., Formability of PET\/PA\/Al\/PP laminated composite pouch for Li-ion battery: Analysis based on experiments and modeling,J. Power Sources, 2025, 653, 237746\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/link.springer.com\/article\/10.1007\/s12206-017-0519-0\"\u003eM. S. Yu, et al., Effect of film properties on formability of aluminum pouch for secondary battery, Journal of Mechanical Science and Technology, 2017, 31, 2759–2763\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47511338549478,"sku":"ESSPCPPFM","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_main.png?v=1775334259"},{"product_id":"esmpctsshs","title":"ECS-SM Heat Sealer (Max. 190 mm) for Top\/Side Sealing of Pouch Cells, ESMPCTSSHS","description":"\u003cp\u003eFor laboratory pouch cell assembly, a heat sealer (also known as a compact pouch sealer) is used to create the final hermetic seals on the top and sides of the Aluminum Laminated Film (ALF). This process requires precise control over temperature, pressure, and sealing time to melt the internal polypropylene (PP) layer of the film without damaging the metal tabs or causing \"electrolyte leakage\" paths.\u003c\/p\u003e\n\u003cp\u003eTop Sealing (Tab Sealing): This is the critical failure point. The sealer must bond the ALF to the tab sealant (the small strip of plastic pre-attached to your Al\/Cu tabs). Always use a soft-face (silicone) bottom blade for top sealing to \"wrap\" the film around the square edges of the tabs.\u003c\/p\u003e\n\u003cp\u003eSide Sealing: Usually involves two layers of ALF (Polypropylene to Polypropylene). This is the easiest seal to achieve and can be done at a slightly lower temperature.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCTSSHS_02_240x240.png?v=1775340877\"\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMPCTSSHS (ESM-PCTSS-HS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 900 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Length: Max. 190 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 3.2 mm (customized width can be up to 8 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003c\/li\u003e\n\u003cli\u003eIf the stacking cell layers are over 50 layers (total tab thickness\u0026gt;5 mm, then the hard sealing with slotting should be adopted) \u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003c\/li\u003e\n\u003cli\u003eHeating duration is adjustable in 0-99 seconds.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCell Fixture\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cell fixture is designed to fix the pouch cell for stable sealing.\u003c\/li\u003e\n\u003cli\u003eThe bar inside the cell fixture can be adjustable to match with various pouch cell sizes. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCTSSHS_03_100x100.png?v=1775342189\" alt=\"\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor\u003cspan\u003e (\u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/EUQOFGC\"\u003eEUQOFGC\u003c\/a\u003e\u003cspan\u003e) \u003c\/span\u003eor a gas tank is required to provide 80-110 psi to support the pneumatic operation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL320 * W320 * H485 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~32 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions,J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47511645946086,"sku":"ESMPCTSSHS","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCTSSHS_main.png?v=1775358988"},{"product_id":"eslpctsshs","title":"ECS-SL Heat Sealer (Max. 370 mm) for Top\/Side Sealing of Pouch Cells, ESLPCTSSHS","description":"\u003cp\u003eFor laboratory pouch cell assembly, a heat sealer (also known as a compact pouch sealer) is used to create the final hermetic seals on the top and sides of the Aluminum Laminated Film (ALF). This process requires precise control over temperature, pressure, and sealing time to melt the internal polypropylene (PP) layer of the film without damaging the metal tabs or causing \"electrolyte leakage\" paths.\u003c\/p\u003e\n\u003cp\u003eTop Sealing (Tab Sealing): This is the critical failure point. The sealer must bond the ALF to the tab sealant (the small strip of plastic pre-attached to your Al\/Cu tabs). Always use a soft-face (silicone) bottom blade for top sealing to \"wrap\" the film around the square edges of the tabs.\u003c\/p\u003e\n\u003cp\u003eSide Sealing: Usually involves two layers of ALF (Polypropylene to Polypropylene). This is the easiest seal to achieve and can be done at a slightly lower temperature.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCTSSHS_02_240x240.png?v=1775340877\"\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLPCTSSHS (ESL-PCTSS-HS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 1200 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Length: Max. 370 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 6.0 mm (customized width can be up to 10 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003c\/li\u003e\n\u003cli\u003eIf the stacking cell layers are over 50 layers (total tab thickness\u0026gt;5 mm, then the hard sealing with slotting should be adopted) \u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003c\/li\u003e\n\u003cli\u003eHeating duration is adjustable in 0-99 seconds.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCell Fixture\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cell fixture is designed to fix the pouch cell for stable sealing.\u003c\/li\u003e\n\u003cli\u003eThe bar inside the cell fixture can be adjustable to match with various pouch cell sizes. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCTSSHS_03_100x100.png?v=1775342189\" alt=\"\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"EUQOFGC\"\u003eEUQOFGC\u003c\/a\u003e) or a gas tank is required to provide 80-110 psi to support the pneumatic operation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL550 * W350 * H530 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~90 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions, J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47511710302438,"sku":"ESLPCTSSHS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLPCTSSHS_main.png?v=1775363596"},{"product_id":"esspcmvs","title":"ECS-SS Multifunctional Vacuum Sealer (L100 * W100 mm) for Pouch Cells, ESSPCMVS","description":"\u003cp\u003eFor pouch cell fabrication, vacuum sealers are specialized pieces of equipment used after electrolyte injection to ensure an air-free environment and prevent leakage. The standard feature of vacuum sealer are shown below: (1) \u003cstrong\u003eVacuum Standing (Diffusion)\u003c\/strong\u003e: This feature allows the cell to sit under vacuum before sealing. This \"standing\" time is critical to force the electrolyte to thoroughly saturate (wet) the electrode pores and separator. (2) \u003cstrong\u003eAdjustable Pump-Down Rate\u003c\/strong\u003e: If the vacuum is pulled too quickly, the electrolyte can boil or be sucked out of the pouch (spillage). High-end units have electronic regulators to control this rate. (3) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: Look for units capable of reaching -95 kPa to -99 kPa (or ~10 Torr) to ensure no moisture or air pockets remain, which would otherwise cause swelling during cycling.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCMVS (ESS-PC-MVS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 800 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCMVS_02_160x160.png?v=1775367157\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Length: Max. 100 mm (Max. cell size: 100mm*100mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 4.0 mm (customized width can be up to 10 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Pressure: ~400 N (~0.04 L gas will be consumed for each sealing)\u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe multifunctional sealing includes top\/side sealing, vacuum standing, vacuum sealing, and gas purge (solid-state battery) functions. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Level for Standing\/Sealing: Max. -95 kPa\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum Standing Time: 0-900 s\u003c\/li\u003e\n\u003cli\u003eVacuum Standing\/Sealing Time: 0-90 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGlovebox Operation Compatibility\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough is included to connect the controller box (outside glovebox) with the sealer part (inside glovebox). \u003c\/li\u003e\n\u003cli\u003eThe mini sealer part is antechamber compatible, so transfer it in\/out won't break the glovebox atmosphere (low O2\/H2O). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is required to provide high vacuum for standing and sealing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor the vacuum sealer placed inside glovebox, an Ar gas tank (60-80 psi) is required to connect with sealer through KF40 feedthrough.\u003c\/li\u003e\n\u003cli\u003eWhen the vacuum sealer placed inside a dryroom, then a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) can be used. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealer: L400 * W330 * H290 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003cli\u003eController: L230 * W230 * H290 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~25 kg in total (~16 kg for sealer, 9 kg for controller)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions,J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47512184684774,"sku":"ESSPCMVS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCMVS_main.png?v=1775365135"},{"product_id":"esmpcmvs","title":"ECS-SM Multifunctional Vacuum Sealer (L180 * W160 mm) for Pouch Cells, ESMPCMVS","description":"\u003cp\u003eFor pouch cell fabrication, vacuum sealers are specialized pieces of equipment used after electrolyte injection to ensure an air-free environment and prevent leakage. The standard feature of vacuum sealer are shown below: (1) \u003cstrong\u003eVacuum Standing (Diffusion)\u003c\/strong\u003e: This feature allows the cell to sit under vacuum before sealing. This \"standing\" time is critical to force the electrolyte to thoroughly saturate (wet) the electrode pores and separator. (2) \u003cstrong\u003eAdjustable Pump-Down Rate\u003c\/strong\u003e: If the vacuum is pulled too quickly, the electrolyte can boil or be sucked out of the pouch (spillage). High-end units have electronic regulators to control this rate. (3) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: Look for units capable of reaching -95 kPa to -99 kPa (or ~10 Torr) to ensure no moisture or air pockets remain, which would otherwise cause swelling during cycling.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable style=\"height: 1032.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMPCMVS (ESM-PC-MVS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 700 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 263.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 263.2px;\"\u003e\n\u003cp\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 263.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Length: Max. 180 mm (Max. cell size: 180mm*160mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 4.0 mm (customized width can be up to 10 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Pressure: ~7 kgf\/cm2 (~100 psi) (~0.04 L gas will be consumed for each sealing)\u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe multifunctional sealing includes top\/side sealing, vacuum standing, vacuum sealing, and gas purge (solid-state battery) functions. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Level for Standing\/Sealing: Max. -95 kPa\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum Standing Time: 0-900 s\u003c\/li\u003e\n\u003cli\u003eVacuum Standing\/Sealing Time: 0-90 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eGlovebox Operation Compatibility\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough with gas tubing and power cable is included to connect the outside vacuum pump and gas pressure tank.\u003c\/li\u003e\n\u003cli\u003eThe medium-size vacuum sealer is glovebox compatible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 172.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 172.6px;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 172.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is required to provide high vacuum for standing and sealing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor the vacuum sealer placed inside glovebox, an Ar gas tank (60-80 psi) is required to connect with sealer through KF40 feedthrough.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhen the vacuum sealer is placed inside a dryroom, then a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL455 * W390 * H600 mm (glovebox-compatible)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~82 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions,J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47512299274470,"sku":"ESMPCMVS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCMVS_main.png?v=1775367892"},{"product_id":"eslpcmvs","title":"ECS-SL Multifunctional Vacuum Sealer (L330 * W330 mm) for Pouch Cells, ESLPCMVS","description":"\u003cp\u003eFor pouch cell fabrication, vacuum sealers are specialized pieces of equipment used after electrolyte injection to ensure an air-free environment and prevent leakage. The standard feature of vacuum sealer are shown below: (1) \u003cstrong\u003eVacuum Standing (Diffusion)\u003c\/strong\u003e: This feature allows the cell to sit under vacuum before sealing. This \"standing\" time is critical to force the electrolyte to thoroughly saturate (wet) the electrode pores and separator. (2) \u003cstrong\u003eAdjustable Pump-Down Rate\u003c\/strong\u003e: If the vacuum is pulled too quickly, the electrolyte can boil or be sucked out of the pouch (spillage). High-end units have electronic regulators to control this rate. (3) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: Look for units capable of reaching -95 kPa to -99 kPa (or ~10 Torr) to ensure no moisture or air pockets remain, which would otherwise cause swelling during cycling.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLPCMVS (ESL-PC-MVS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 1300 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Blade Length: 345 mm, Effective sealing width: 330 mm (Max. cell size: 330mm*330mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 6.0 mm (customized width can be up to 15 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Pressure: ~140 kgf (~0.6 MPa) (~0.18 L gas will be consumed for each sealing)\u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe multifunctional sealing includes top\/side sealing, vacuum standing, vacuum sealing, and gas purge (solid-state battery) functions. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Level for Standing\/Sealing: Max. -95 kPa\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum Standing Time: 0-900 s\u003c\/li\u003e\n\u003cli\u003eVacuum Standing\/Sealing Time: 0-90 s (the recommended vacuum sealing time is 4-5 s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGlovebox Operation Compatibility\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough with gas tubing and power cable is included to connect the outside vacuum pump and gas pressure tank.\u003c\/li\u003e\n\u003cli\u003eThe large-size vacuum sealer is glovebox compatible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is required to provide high vacuum for standing and sealing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor the vacuum sealer placed inside glovebox, an Ar gas tank (60-80 psi) is required to connect with sealer through KF40 feedthrough.\u003c\/li\u003e\n\u003cli\u003eWhen the vacuum sealer placed inside a dryroom, then a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) can be used. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL540 * W500 * H590 mm (glovebox-compatible)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~89 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions,J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47512435228902,"sku":"ESLPCMVS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLPCMVS_main.png?v=1775371765"},{"product_id":"esovp","title":"Small Oilless Vacuum Pump (113 L\/min), ESOVP","description":"\u003cp\u003eFor battery research, a small oilless (dry) vacuum pump is critical to prevent oil vapor from contaminating your battery materials or interfering with the electrolyte. Since you are likely working within a glovebox or a small lab bench, portability and chemical resistance are key.\u003c\/p\u003e\n\u003ctable style=\"height: 105.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESOVP (E-SOVP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 430 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 10px;\"\u003e\u003cem\u003eVacuum Flow Rate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 10px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e113 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e-0.093 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eConnection Tubing\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e5*8 mm (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL270 * W230 * H130 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~10 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TY","offers":[{"title":"Default Title","offer_id":47512544542950,"sku":"ESOVP","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESOVP_main.png?v=1775407970"},{"product_id":"edsrvvp","title":"Double Stage Rotary Vane Vacuum Pump (132-156 L\/min), EDSRVVP","description":"\u003cp\u003eA double-stage rotary vane vacuum pump is the go-to choice when you need a significantly deeper vacuum (10^{-3} to 10^{-4} mbar) and higher pumping speeds at a lower cost. In battery research, these are typically used for large-scale vacuum drying ovens or backing glovebox purification systems rather than the sealing machine itself, due to the risk of oil back-streaming.\u003c\/p\u003e\n\u003cp\u003eA rotary vane pump uses centrifugal force to move vanes within a cylindrical housing, trapping and compressing air. A \"Double Stage\" pump essentially connects two of these mechanisms in series. \u003cstrong\u003eStage 1 (High Vacuum Stage)\u003c\/strong\u003e: Takes in the gas from the inlet at low pressure and compresses it. \u003cstrong\u003eStage 2 (Low Vacuum Stage)\u003c\/strong\u003e: Takes the exhaust from the first stage and compresses it further to atmospheric pressure for discharge.\u003c\/p\u003e\n\u003cp\u003eThe key features of a double-stage rotary vane vacuum pump are show below: (1) \u003cstrong\u003eUltimate Vacuum\u003c\/strong\u003e: It can reach pressures as low as 10^{-3} mbar. This is orders of magnitude deeper than a standard diaphragm pump, which is essential for removing deep-seated moisture in electrode materials. (2) \u003cstrong\u003eGas Ballast\u003c\/strong\u003e: The gas ballast can leak a small amount of dry air\/nitrogen into the second stage to prevent vapors (like water or electrolyte) from condensing into the pump oil. (3) \u003cstrong\u003eAnti-Suckback Valve\u003c\/strong\u003e: A critical safety feature. If the power fails, this internal valve prevents the pump oil from being sucked back into your vacuum chamber or pouch cell sealer.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 495.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEDSRVVP (E-DSRVVP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, ~400 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Flow Rate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50 Hz: 8 m3\/h (132 L\/min)\u003c\/li\u003e\n\u003cli\u003e60 Hz: 9.6 m3\/h (156 L\/min)\u003c\/li\u003e\n\u003cli\u003eHigher vacuum rates, such as 312 L\/min, 474 L\/min, 594 L\/min can be supplied upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 4*10^(-3) Torr\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eInlet\/Outlet Port\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eKF25 (KF16 is available upon request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eOil Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.6-1.0 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMotor Rotation Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1440\/1720 rpm (50\/60 Hz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eNoise Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e≤52 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL445 * W144 * H217 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~21 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FY","offers":[{"title":"Default Title","offer_id":47513025282278,"sku":"EDSRVVP","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main.png?v=1775410712"},{"product_id":"euqofgc","title":"Ultra-Quiet Oil-Free Gas Compressor (120 psi, 220 L\/min), EUQOFGC","description":"\u003cp\u003eAn ultra-quiet oi-free gas compressor can power the pneumatic actuators on vacuum sealer or stacker, which provides clean, dry gas without the risk of oil aerosols contaminating electrolyte or electrodes.\u003c\/p\u003e\n\u003cp\u003eThe oil-free feature provides advantages: (1) \u003cstrong\u003eChemical Purity\u003c\/strong\u003e: Pneumatic sealers often \"exhaust\" a small amount of air near the machine. If that air contains oil mist, it can settle on your aluminum laminate film, preventing a proper heat seal or contaminating the electrolyte. (2) \u003cstrong\u003eMaintenance\u003c\/strong\u003e: Oil-lubricated compressors require oil changes and mist separators. Oil-free units use permanent self-lubricating seals (usually PTFE\/Teflon), which significantly reduces the maintenance burden in a clean-room environment.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 495.6px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEUQOFGC (E-UQOFGC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~3180 W \u003c\/li\u003e\n\u003cli\u003eAn 5000W transformer can be used for AC110V operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eGas Flow Rate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~220 L\/min\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eRotation Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e3880 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eCompress Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.8 MPa (~120 psi)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eGas Tank Volume \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e30 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eNoise Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e40 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL610 * W350 * H600 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~23 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"JP","offers":[{"title":"Default Title","offer_id":47513044156646,"sku":"EUQOFGC","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main.png?v=1775414665"},{"product_id":"esspchpfm","title":"ECS-SS Heat Press Formation Machine (L120*W80 mm, Same-Side Tabs) for Pouch Cells, ESSPCHPFM","description":"\u003cp\u003ethe Heat Press Formation Machine (also known as a Hot Press Formation Fixture) is used during the most critical stage of the battery's \"birth\": the initial charging (Formation). Heat press formation applies simultaneous temperature and mechanical pressure to the cell face. This ensures the Solid Electrolyte Interphase (SEI) layer forms uniformly, which is the \"secret sauce\" for long cycle life and high safety.\u003c\/p\u003e\n\u003cp\u003eDuring the first charge, lithium ions react with the electrolyte to form the SEI layer on the anode. Using a heat press offers three distinct advantages: (1) \u003cstrong\u003eUniform SEI Formation\u003c\/strong\u003e: Pressure ensures the electrode layers are perfectly flat and in intimate contact, preventing \"islands\" of uneven SEI that can lead to lithium plating (dendrites). (2) \u003cstrong\u003eGas Management\u003c\/strong\u003e: Pressure forces the gases generated during the SEI reaction (like CO2, H2, and C2H4) into the \"gas bag\" or \"side pocket\" of the pouch, preventing bubbles from getting trapped between the electrode layers. (3)\u003cstrong\u003e Improved Wetting\u003c\/strong\u003e: The heat reduces the viscosity of the electrolyte, helping it penetrates deep into the nanopores of the electrodes.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 1392.6px; width: 120.185%;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCHPFM8H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCHPFM16H \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCHPFM32H \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCHPFM64H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 106.4px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1000 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2000 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2500 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 3500 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 86.8px;\"\u003e\n\u003cp\u003e\u003cem\u003eWorking Pressure\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e20~1000kg, ±5kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e20~2000kg, ±5kg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e20~2000kg, ±5kg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e20~2000kg, ±5kg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 106.4px;\"\u003e\u003cem\u003eHeating Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-90 °C, ± 3 °C\u003c\/li\u003e\n\u003cli\u003eHeating Rate: 80°C in 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-90 °C, ± 3 °C\u003c\/li\u003e\n\u003cli\u003eHeating Rate: 80°C in 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-90 °C, ± 3 °C\u003c\/li\u003e\n\u003cli\u003eHeating Rate: 80°C in 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-90 °C, ± 3 °C\u003c\/li\u003e\n\u003cli\u003eHeating Rate: 80°C in 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 47.6px;\"\u003e\u003cem\u003eGas Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.25-0.8 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.25-0.8 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.25-0.8 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.25-0.8 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 126px;\"\u003e\u003cem\u003eAcceptable Pouch Cell Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 40-120mm, W: 40-80mm (\u003cspan\u003eTabs at the same side\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eMax. 8 cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e     \u003cimg height=\"70\" width=\"111\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_01-1_100x100.png?v=1775424140\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 40-120mm, W: 40-80mm (\u003cspan\u003eTabs at the same side\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eMax. 16 cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_02-1_160x160.png?v=1775424255\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 40-120mm, W: 40-80mm (\u003cspan\u003eTabs at the same side\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eMax. 32 cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: start;\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_03-1_100x100.png?v=1775424459\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 40-120mm, W: 40-80mm (\u003cspan\u003eTabs at the same side\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eMax. 64 cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_04-1_100x100.png?v=1775424459\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 357.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 357.6px;\"\u003e\u003cem\u003eBattery Analyzer (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 357.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA battery analyzer with 8 channels is required for synchronous operation.\u003c\/li\u003e\n\u003cli\u003eThe integration of battery analyzer with the heat press can be supplied upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 357.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTwo battery analyzers (16 channels in total) are required for synchronous operation.\u003c\/li\u003e\n\u003cli\u003eThe integration of battery analyzer with the heat press can be supplied upon request. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 357.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFour battery analyzers (32 channels in total) are required for synchronous operation.\u003c\/li\u003e\n\u003cli\u003eThe integration of battery analyzer with the heat press can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 357.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEight battery analyzers (64 channels in total) are required for synchronous operation.\u003c\/li\u003e\n\u003cli\u003eThe integration of battery analyzer with the heat press can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 214.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 214.6px;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 214.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required for pneumatic operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 214.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 214.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 214.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 184.8px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 184.8px;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL860 * W600 * H600 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1150 * W600 * H700 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1650 * W700 * H1600 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1650 * W1200 * H600 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~135 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~150 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~250 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~350 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201900118\"\u003eH. H. Heimes, et al., The Effects of Mechanical and Thermal Loads during Lithium-Ion Pouch Cell Formation and Their Impacts on Process Time, Energy Technology, 2020, 8, 1900118\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ab68d6\/meta\"\u003eC. Bommier, et al., Operando Acoustic Monitoring of SEI Formation and Long-Term Cycling in NMC\/SiGr Composite Pouch Cells, J. Electrochem. Soc., 2020, 167, 020517\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"8 Channels","offer_id":47513131745510,"sku":"ESSPCHPFM8H","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"16 Channels","offer_id":47513131778278,"sku":"ESSPCHPFM16H","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"32 Channels","offer_id":47513131811046,"sku":"ESSPCHPFM32H","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"64 Channels","offer_id":47513131843814,"sku":"ESSPCHPFM64H","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_01.png?v=1775422356"},{"product_id":"enct4008q5v100ma","title":"Neware CT-4008Q 5V100mA Battery Testing System, ENCT4008Q5V100mA","description":"\u003cp\u003eThe Neware CT-4008Q is a high-precision battery testing system specifically designed for R\u0026amp;D labs and quality control, particularly for small-format cells like the pouch cells, coin cells, and 18650s you are working with. The \"Q\" in the model name stands for Quintuple (5) ranges, meaning each channel can automatically switch between five different current scales to maintain extreme accuracy from micro-amps up to the full rated current.\u003c\/p\u003e\n\u003cp\u003eThe CT-4008Q series is the \"low-current\" high-precision branch of Neware's 4000 series. (1) \u003cstrong\u003eVoltage Range\u003c\/strong\u003e: Typically 0V to 5V (standard for Lithium chemistries). (2) \u003cstrong\u003eCurrent Ranges\u003c\/strong\u003e: Most common configurations are 5V 10mA, 100mA, 1A, 6A, or 12A. (3) \u003cstrong\u003eAccuracy\u003c\/strong\u003e: 0.05% of Full Scale (FS). Because of the multi-range switching, it remains accurate even when testing at very low C-rates. (4) \u003cstrong\u003eData Acquisition\u003c\/strong\u003e: Sampling rates up to 10Hz (100ms per point), which is essential for capturing the voltage plateaus during SEI formation or Pulse tests.\u003c\/p\u003e\n\u003cp\u003eIt can be mainly used for: (1) \u003cstrong\u003eDCIR Testing (Direct Current Internal Resistance)\u003c\/strong\u003e: The software can automatically calculate the internal resistance of your pouch cells, which is a primary indicator of how well your tabs were welded and how well your electrolyte has wetted the electrodes. (2) \u003cstrong\u003eCycle Life Testing\u003c\/strong\u003e: You can program thousands of \"Charge-Rest-Discharge-Rest\" loops to see how your battery degrades over months of use. (3) \u003cstrong\u003eC-Rate Characterization\u003c\/strong\u003e: Easily test how your pouch cell performs under high power (fast discharge) versus high energy (slow discharge). (4) \u003cstrong\u003ed(Q)\/d(V) Analysis\u003c\/strong\u003e: The high precision of the 4008Q allows you to perform Differential Capacity Analysis. This helps you identify specific electrochemical reactions and phase transitions occurring inside your cell that aren't visible on a standard voltage curve.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eENCT4008Q5V100mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 40 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eVoltage Features\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e10 mV ~ 5V\u003c\/li\u003e\n\u003cli\u003eAccuracy: ± 0.01% of F.S.\u003c\/li\u003e\n\u003cli\u003eStability: ± 0.02% of F.S.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCurrent Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eThere are four current ranges:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          Range 1: (0.2 uA - 0.1 mA) \u003c\/p\u003e\n\u003cp\u003e          Range 2: (0.1 mA - 1.0 mA)\u003c\/p\u003e\n\u003cp\u003e          Range 3: (1.0 mA - 10 mA)\u003c\/p\u003e\n\u003cp\u003e          Range 4: (10 mA - 100 mA)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccuracy: ± 0.01% of F.S.\u003c\/li\u003e\n\u003cli\u003eCV Cut-Off Current: 0.1μA\/1μA\/10μA\/0.1mA\u003c\/li\u003e\n\u003cli\u003eStability: ± 0.02% of F.S.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eOutput Power\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0.5 W\/channel\u003c\/li\u003e\n\u003cli\u003eStability: ± 0.1% of F.S.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eTime\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent Response Time: ≤1 ms\u003c\/li\u003e\n\u003cli\u003eWorking Step Time: ≤(365*24) h\/step\u003cbr\u003eTime format-00: 00: 00.000 (h、m、s、ms)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eData Logging\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMinimum time interval: 100 ms\u003c\/li\u003e\n\u003cli\u003eRecord frequency: 10 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMain Test Functions\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eConstant current charging\/discharging (CCC\/CCD)\u003c\/li\u003e\n\u003cli\u003eConstant voltage charging\/discharging (CVC\/CVD)\u003c\/li\u003e\n\u003cli\u003eConstant power charging\/discharging (CPC\/CPD)\u003c\/li\u003e\n\u003cli\u003eConstant current constant voltage charging\/discharging (CCCVC\/CCCVD)\u003c\/li\u003e\n\u003cli\u003eDCIR\u003c\/li\u003e\n\u003cli\u003ePulse Simulation Test\u003c\/li\u003e\n\u003cli\u003eGITT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eClip Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Crocodile fixture\u003c\/li\u003e\n\u003cli\u003e(2) Polymer fixture\u003c\/li\u003e\n\u003cli\u003e(3) PCB buckle fixture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENCT4008Q5V100mA_01_100x100.png?v=1775429172\" alt=\"\"\u003e     \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENCT4008Q5V100mA_02_100x100.png?v=1775429172\" alt=\"\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENCT4008Q5V100mA_03_100x100.png?v=1775429172\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eIntegration Options (Optional)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMultiple testing units can be integrated with upper controller on a rack. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENCT4008Q5V100mA_04_100x100.png?v=1775429684\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL443 * W310 * H43 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~10 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/full\/10.1002\/eem2.12615\"\u003eY. Son, et al., Analysis of Differences in Electrochemical Performance Between Coin and Pouch Cells for Lithium-Ion Battery Applications, Energy Environmental Materials, 2024, 7, e12615\u003c\/a\u003e.\u003c\/p\u003e","brand":"Neware","offers":[{"title":"Default Title","offer_id":47513157009638,"sku":"ENCT4008Q5V100mA","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENCT4008Q5V100mA_main.png?v=1775429074"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/ESSPCBAS_main_b394ee14-c89f-4e29-aa14-40df2f1e81c8.png?v=1776817516","url":"https:\/\/echemsupplies.com\/collections\/battery-equipment.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}