{"title":"Mechanochemistry","description":"\u003cp\u003e\u003cstrong\u003eMechanochemistry turns a ball mill into a synthesis reactor.\u003c\/strong\u003e Instead of dissolving precursors and waiting hours for diffusion in a furnace, you load powders into a sealed jar with grinding media and let repeated high-energy impacts drive the reaction directly in the solid state. For battery and solid-electrolyte researchers, this is the workhorse route to sulfide superionics, halide conductors, and fluorinated polyanion cathodes that decompose before they melt — and increasingly the preferred path to nanostructured composite electrodes where intimate active-material \/ conductive-additive contact matters.\u003c\/p\u003e\n\n\u003cp\u003eThe equipment in this collection is built around planetary ball milling, the dominant format for laboratory mechanochemistry. Jars sit on a sun wheel and counter-rotate; centrifugal force pins the media to the wall until it detaches, crosses the jar, and impacts the opposite wall, transferring kinetic energy into the powder bed as a mix of impact and shear.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-speed planetary mills (around 1000-1200 rpm)\u003c\/strong\u003e deliver the impact energies needed for mechanical alloying, amorphization, and nano-scale particle size reduction of hard ceramics and oxides.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable speed-ratio mills\u003c\/strong\u003e decouple the sun-wheel revolution from the jar rotation so you can tune the impact-versus-shear balance independently — useful when a fixed gear ratio overheats heat-sensitive sulfide glasses or under-mills tougher oxides.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree-dimensional (3D) planetary mills\u003c\/strong\u003e add a tilting or swing axis on top of the planetary motion, breaking the caking pattern that pins material to the jar wall and improving homogeneity for viscous slurries and sticky composites.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMini and glovebox-compatible mills\u003c\/strong\u003e shrink the footprint so the same kinematics fit inside an Ar-filled glovebox, which is the operating mode for air-sensitive Li-S, Na-ion, and sulfide solid-electrolyte work.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLarger 4 x 1 L and 4 x 3 L jar formats\u003c\/strong\u003e scale a validated recipe up from screening grams to the tens or hundreds of grams needed for pouch-cell and pilot-line builds without changing the milling principle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eChoose jar and media chemistry to match your powder: zirconia is the default for hard oxide and sulfide work; stainless steel is acceptable when iron contamination is tolerable; agate suits soft phases and trace-metal-sensitive electrochemistry. If you are mechanochemically synthesizing a sulfide solid electrolyte such as Li6PS5Cl or Li7P3S11, start with a glovebox-compatible mini high-energy unit; for nano-grinding harder oxides and garnet precursors, a high-speed 1000-1200 rpm unit is the right tool; for scale-up of a proven recipe, move to the larger-jar high-energy formats. For adjacent solid-state routes, see \u003ca href=\"\/collections\/solid-state-synthesis\"\u003eSolid-State Synthesis\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"efmmhepbm","title":"ECS-FM Mini High-Energy Planetary Ball Mill (800 rpm, 4*500 mL), (Ar-Filled Glovebox-Compatible)- EFMMHEPBM","description":"\u003cp\u003eA mini high-energy planetary ball mill is a compact, benchtop instrument designed for rapid particle size reduction down to the nano-scale (\u0026lt;100 nm) and high-shear mixing. The \"high-energy\" designation typically refers to the ability to reach high rotational speeds (up to 1100 RPM), which generates the centrifugal forces necessary to break down resilient aggregates.\u003c\/p\u003e\n\u003cp\u003eIn a planetary ball mill, the grinding jars are mounted on a \"sun wheel.\" As the sun wheel rotates, the jars rotate in the opposite direction on their own axes. (1) \u003cstrong\u003eEnergy Transfer\u003c\/strong\u003e: This counter-rotation creates a powerful interaction between centrifugal and Coriolis forces. (2) \u003cstrong\u003eMedia Motion\u003c\/strong\u003e: The grinding balls are launched across the jar (cataracting) to strike the material with high impact energy, while also rolling against the walls (cascading) to provide intensive friction and shear.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMMHEPBM (EFM-MHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 800 rpm (adjustable). The corresponding revolution speed is 400 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL430 * W490 * H420 mm (Ar-filled glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~92 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47534743159014,"sku":"EFMMHEPBM","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMMHEPBM_main.png?v=1776068665"},{"product_id":"eflhepbm","title":"ECS-FL High-Energy Planetary Ball Mill (800 rpm, 4*1000 mL) - EFLHEPBM","description":"\u003cp\u003eA high-energy planetary ball mill is a compact, benchtop instrument designed for rapid particle size reduction down to the nano-scale (\u0026lt;100 nm) and high-shear mixing. The \"high-energy\" designation typically refers to the ability to reach high rotational speeds (up to 1100 RPM), which generates the centrifugal forces necessary to break down resilient aggregates.\u003c\/p\u003e\n\u003cp\u003eIn a planetary ball mill, the grinding jars are mounted on a \"sun wheel.\" As the sun wheel rotates, the jars rotate in the opposite direction on their own axes. (1) \u003cstrong\u003eEnergy Transfer\u003c\/strong\u003e: This counter-rotation creates a powerful interaction between centrifugal and Coriolis forces. (2) \u003cstrong\u003eMedia Motion\u003c\/strong\u003e: The grinding balls are launched across the jar (cataracting) to strike the material with high impact energy, while also rolling against the walls (cascading) to provide intensive friction and shear.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLHEPBM (EFL-HEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 800 rpm (adjustable). The corresponding revolution speed is 400 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflamj1000?variant=47537924276454\"\u003eEFLAMJ1000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-SS304_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Nylon_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-PTFE_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-ZrO2_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-WC_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Agate_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavmj500?variant=47537998921958\"\u003eEFLAVMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e        \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W500 * H500 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~106 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538007179494,"sku":"EFLHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLHEPBM_main.png?v=1776144504"},{"product_id":"efmhsppbm","title":"ECS-FM High-Speed \u0026 Powerful Planetary Ball Mill (1200 rpm, 4*500 mL)- EFMHSPPBM","description":"\u003cp\u003eA high-speed unit typically operates between 800 and 1100 RPM, generating the massive G-forces required for nano-milling and mechanical alloying.\u003c\/p\u003e\n\u003cp\u003eIn a planetary mill, the jars rotate in the opposite direction to the sun wheel. As you increase the RPM, the energy delivered to your material increases exponentially. (1) \u003cstrong\u003eImpact Energy\u003c\/strong\u003e: At 1000 RPM, the grinding balls (typically Zirconia) are launched with enough kinetic energy to break the primary crystal bonds of hard ceramic electrolytes like YSZ or BZCYYb. (2) \u003cstrong\u003eShear Intensity\u003c\/strong\u003e: The high rotational velocity creates intense friction between the balls and the jar wall. This is critical for unbundling Carbon Nanotubes (CNTs) and achieving a perfect \"percolating network\" in your NMP-based slurries.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMHSPPBM (EFM-HSPPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1200 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall milling in vacuum or inert gas environment is feasible. \u003c\/li\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eJar Number Upgrade (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIf customer want to upgrade the jar number from 4 to 6, we can supply it as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_04_100x100.png?v=1776183857\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_05_100x100.png?v=1776183857\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~326 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538084446438,"sku":"EFMHSPPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_main.png?v=1776148300"},{"product_id":"eflhsppbm","title":"ECS-FL High-Speed \u0026 Powerful Planetary Ball Mill (1200 rpm, 4*1000 mL), EFLHSPPBM","description":"\u003cp\u003eA high-speed unit typically operates between 800 and 1100 RPM, generating the massive G-forces required for nano-milling and mechanical alloying.\u003c\/p\u003e\n\u003cp\u003eIn a planetary mill, the jars rotate in the opposite direction to the sun wheel. As you increase the RPM, the energy delivered to your material increases exponentially. (1) \u003cstrong\u003eImpact Energy\u003c\/strong\u003e: At 1000 RPM, the grinding balls (typically Zirconia) are launched with enough kinetic energy to break the primary crystal bonds of hard ceramic electrolytes like YSZ or BZCYYb. (2) \u003cstrong\u003eShear Intensity\u003c\/strong\u003e: The high rotational velocity creates intense friction between the balls and the jar wall. This is critical for unbundling Carbon Nanotubes (CNTs) and achieving a perfect \"percolating network\" in your NMP-based slurries.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLHSPPBM (EFL-HSPPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1200 rpm\u003c\/span\u003e (adjustable, the corresponding maximum revolution speed is 600 rpm). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall milling in vacuum or inert gas environment is feasible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavmj500?variant=47537998921958\"\u003eEFLAVMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 20 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~336 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539057098982,"sku":"EFLHSPPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLHSPPBM_main.png?v=1776183614"},{"product_id":"efel3dhepbm","title":"ECS-FEL Three-Dimensional (3D) High-Energy Planetary Ball Mill (650 rpm, 4 × 3L), EFEL3DHEPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFEL3DHEPBM (EFEL-3DHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 650 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 3-10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 3L\/each (2 or 4 for operation balance). The maximum processing capacity is 12 L. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, Zirconia, Tungsten Carbide (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efelamj3000?variant=47539455262950\"\u003eEFELAMJ3000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-SS304_100x100.png?v=1776201842\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-Nylon_100x100.png?v=1776201842\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-ZrO2_100x100.png?v=1776201842\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-WC_100x100.png?v=1776201842\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1120 * W685 * H780 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~282 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539377799398,"sku":"EFEL3DHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFEL3DHEPBM_main.png?v=1776210346"},{"product_id":"ecmasrhepbm","title":"ECS-CM Adjustable Speed-Ratio High-Energy Planetary Ball Mill (1600 rpm, 4*500 mL), ECMASRHEPBM","description":"\u003cp\u003eAn Adjustable Speed-Ratio High-Energy Planetary Ball Mill represents the most advanced evolution of planetary milling. While standard planetary mills have a fixed gear ratio (usually 1:-2, meaning the sun wheel and jars rotate in a fixed proportion), an adjustable ratio mill allows you to decouple these speeds.\u003c\/p\u003e\n\u003cp\u003eIn a planetary mill, the jars are mounted on a \"sun wheel.\" The jars rotate around the sun wheel's axis while simultaneously spinning on their own axes in the opposite direction. (1) \u003cstrong\u003eRevolution (Sun Wheel)\u003c\/strong\u003e: Generates centrifugal force that pins the media to the wall. (2) \u003cstrong\u003eRotation (Jar)\u003c\/strong\u003e: Generates the force that causes the media to detach and fly across the jar. (3) \u003cstrong\u003eThe \"Adjustable\" Advantage\u003c\/strong\u003e: By changing the speed ratio (e.g., from 1:-2 to 1:-3.5), you can alter the trajectory of the grinding balls. High Ratio: Increases impact energy (better for fracturing hard crystals). Low Ratio: Increases friction\/shear (better for surface activation and coating conductive carbon onto active materials).\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eECMASRHEPBM (ECM-ASRHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 4000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar self-rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1200 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSun-wheel revolution speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e400 pm\u003c\/span\u003e (adjustable)\u003c\/li\u003e\n\u003cli\u003eCentrifugal force: 136 g\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003cli\u003eThe cooling function (-10°C) with semiconductor refrigerant module can be supplied upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. Other milling jar volumes, such as 100 mL, 250 mL, are also available upon request. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Polyurethane, Zirconia, Alumina, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling Jars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003cli\u003eThe real milling effects depends on the intrinsic properties of feeding materials, milling ball, milling time, and others. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~245 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"CSKJ","offers":[{"title":"Default Title","offer_id":47547499118822,"sku":"ECMASRHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ECMASRHEPBM_main.png?v=1776445181"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/EFMMHEPBM_main_e0557cd9-0086-4162-b563-bc8ac9dade84.png?v=1777058912","url":"https:\/\/echemsupplies.com\/collections\/mechanochemistry.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}