{"title":"Mixers \u0026 Mills","description":"\u003cp\u003e\u003cstrong\u003eMixers and mills sit between raw powder and a coatable, pressable, or sinterable feedstock — and the architecture you pick at each stage decides whether your electrodes hit target capacity or pinhole through every meter of foil.\u003c\/strong\u003e This top-level section gathers every comminution and homogenization platform EChem Supplies stocks for battery, fuel-cell, and electrolyzer R\u0026amp;D, organized by where the equipment sits in a typical powder-to-slurry-to-electrode workflow.\u003c\/p\u003e\n\n\u003cp\u003eWorking upstream to downstream:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary size reduction\u003c\/strong\u003e — start with \u003ca href=\"\/collections\/crushers\"\u003eCrushers\u003c\/a\u003e for jaw-style compressive fracture of bulk lumps, sintered pellets, and recycling feedstock, then move to \u003ca href=\"\/collections\/jet-mills\"\u003eJet Mills\u003c\/a\u003e when sub-micron, contamination-free grinding under inert gas is required for cathode actives or moisture-sensitive solid electrolytes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedia-based fine milling\u003c\/strong\u003e — \u003ca href=\"\/collections\/ball-mills\"\u003eBall Mills\u003c\/a\u003e cover planetary, vibratory, attrition, and rolling formats spanning impact, shear, and gentle cascade for ceramics, sulfide electrolytes, and slurry homogenization, while \u003ca href=\"\/collections\/sand-mills\"\u003eSand Mills\u003c\/a\u003e push wet slurries into the deep-submicron range for nano-active materials, CNT dispersions, and catalyst inks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGentle and specialty grinding\u003c\/strong\u003e — \u003ca href=\"\/collections\/mortar-mills\"\u003eMortar Mills\u003c\/a\u003e automate mortar-and-pestle motion for shear-sensitive layered oxides, sulfide and halide electrolytes, and sulfur-rich Li-S cathodes where ball-mill impact would amorphize the lattice.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePowder and slurry homogenization\u003c\/strong\u003e — \u003ca href=\"\/collections\/dry-mixers\"\u003eDry Mixers\u003c\/a\u003e handle solvent-free blending and PTFE fibrillation for dry electrode workflows, while \u003ca href=\"\/collections\/wet-mixers\"\u003eWet Mixers\u003c\/a\u003e cover planetary vacuum mixers, 3D shakers, nano sand mills, and slurry filters for PVDF\/NMP and aqueous CMC\/SBR pastes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClassification and tooling\u003c\/strong\u003e — \u003ca href=\"\/collections\/sieving-machines\"\u003eSieving Machines\u003c\/a\u003e set the upper and lower particle-size cuts that protect every downstream step, and \u003ca href=\"\/collections\/press-accessories\"\u003eAccessories\u003c\/a\u003e supply the wear-part jars, media, and fixtures that govern contamination across the whole line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are building a new electrode line, start with the wet or dry mixer matched to your binder system; for raw-material preparation, work crushers into jet or ball mills, then classify on the sieving page before slurry casting.\u003c\/p\u003e\n","products":[{"product_id":"esshsdspvsm","title":"ECS-SS High-Speed (1500 rpm) Dual-Shaft Planetary Vacuum Slurry Mixer (50-1000 mL)- ESSHSDSPVSM","description":"\u003cp\u003eFor battery research and electrode preparation, selecting a high-speed vacuum slurry mixer is essential to achieve a homogeneous, agglomerate-free paste. Most lab-scale planetary mixers for this application offer speeds up to 1,500 RPM, which is critical for dispersing binders and active materials without introducing air bubbles.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable style=\"height: 616px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSHSDSPVSM (ESS-HSDSPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1300 W \u003c\/li\u003e\n\u003cli\u003eA 2000W transformer can be used for AC110V operation \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eStirring Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRotation Speed: 0-1500 rpm, 3 programmable segments for automatic mode\u003c\/li\u003e\n\u003cli\u003eRevolution Speed: 0-500 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 137.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 137.2px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 137.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar volumes, such as 50 mL, 100 mL, 200 mL, 500 mL, and 1000 mL are available options. \u003c\/li\u003e\n\u003cli\u003eEffective slurry volume processing: 20%-70% is highly recommended. \u003c\/li\u003e\n\u003cli\u003eFor the 50 mL mixing jar, only single shaft was design due to limited inner space\u003c\/li\u003e\n\u003cli\u003eThe Cooling and Heating (\u003cspan\u003e≤150 °C\u003c\/span\u003e) functions are available.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_03_100x100.png?v=1774639286\" style=\"float: none;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_04_100x100.png?v=1774639294\" style=\"float: none;\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 ~ -0.09 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL435 * W330 * H625 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~50 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Mixer + 50 mL Jar","offer_id":47489014563046,"sku":"ESSHSDSPVSM50","price":3999.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 100 mL Jar","offer_id":47489014595814,"sku":"ESSHSDSPVSM100","price":4499.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 200 mL Jar","offer_id":47489014628582,"sku":"ESSHSDSPVSM200","price":4599.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 500 mL Jar","offer_id":47489014661350,"sku":"ESSHSDSPVSM500","price":4699.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 1000 mL Jar","offer_id":47489014694118,"sku":"ESSHSDSPVSM1000","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSHSDSPVSM_main.png?v=1774655342"},{"product_id":"eredspvsm","title":"ECS-R Economic Dual-Shaft Planetary Vacuum Slurry Mixer (1000 rpm, 500 mL), EREDSPVSM","description":"\u003cp\u003eFor battery research and electrode preparation, selecting a high-speed vacuum slurry mixer is essential to achieve a homogeneous, agglomerate-free paste. Most lab-scale planetary mixers for this application offer speeds up to 1,500 RPM, which is critical for dispersing binders and active materials without introducing air bubbles.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable style=\"height: 625.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEREDSPVSM (ER-EDSPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 500 W\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1000 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 145.6px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax Speed: 1000 rpm, 4 programmable segments for automatic mode\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine Speed of Stirring Shaft: 5.4 m\/s\u003c\/li\u003e\n\u003cli\u003eLine Speed of Dispersing Impeller: 5.3 m\/s\u003c\/li\u003e\n\u003cli\u003eStirring Shaft Size: Φ35 mm\u003c\/li\u003e\n\u003cli\u003eDispersing Impeller: Φ34 mm\u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: Max. 12000 cP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 min\u003c\/li\u003e\n\u003cli\u003eCycle Times: 9999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 68px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 68px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 68px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar volume: 500 mL (other volumes of 250 mL and 1 L with dual-shaft planetary design, as well as 50, 100, 150 mL with single mixing impeller are available upon request)\u003c\/li\u003e\n\u003cli\u003eThe dual-shaft design is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM_02_100x100.png?v=1779083290\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -85 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL330 * W320 * H570 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~27 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47489133052134,"sku":"ETSMSDSPVSM","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM.png?v=1779083289"},{"product_id":"etmtspvsm","title":"ECS-TM Three-Shaft (Two Mixing, One Dispersing) Planetary Vacuum Slurry Mixer (2-10 L)- ETMTSPVSM","description":"\u003cp\u003eFor high-viscosity electrode pastes and advanced battery research, a three-shaft vacuum slurry mixer (often called a planetary dispersive mixer) is the professional standard. Unlike standard mixers, these units combine low-speed planetary folding with high-speed shear dispersion to break down tough agglomerates in binders like PVDF or carboxymethyl cellulose (CMC).\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM10L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~2000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~4000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~5500 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Barrel \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 1.2-2.0 L (design volume is 3.8 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 180 mm, Depth: 150 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/8\". \u003c\/li\u003e\n\u003cli\u003eNo discharge valve at the bottom of the barrel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 2.7-5.0 L (design volume is 8.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D.240 mm, Depth: 180 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/4\". \u003c\/li\u003e\n\u003cli\u003eG1-1\/2\" discharge valve is available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 5.0-10.0 L (design volume is 16 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 310 mm, Depth: 220 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G1\/2\". \u003c\/li\u003e\n\u003cli\u003eG 1\" discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 750 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 94 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 8-76 rpm (line speed: 0.03-0.37m\/s, Planetary revolution speed: 5-52 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 6 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2-3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 1500 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 124 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 10-98 rpm (line speed: 0.06-0.60m\/s; Planetary revolution speed: 5-50 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 6.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2-3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 2200 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 161 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 10-100 rpm (line speed: 0.08-0.80m\/s; Planetary revolution speed: 5-50 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 7.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 450-4450 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.3-13 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 450-4450 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.3-13 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 2200 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 70 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 610-6100 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 2.2-22 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSpatula\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1300mm×W550mm×H1600mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1463mm×W610mm×H1770mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1500mm×W650mm×H1800mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~600 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~700 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~800 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"TOB","offers":[{"title":"2 L","offer_id":47491632562406,"sku":"ETMTSPVSM2L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"5 L","offer_id":47491632595174,"sku":"ETMTSPVSM5L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"10 L","offer_id":47491632627942,"sku":"ETMTSPVSM10L","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_main.png?v=1774655998"},{"product_id":"etsdsmdpvsm","title":"ECS-TS Dual-Shaft (Mixing + Dispersing) Planetary Vacuum Slurry Mixer (1000 mL)- ETSDSMDPVSM","description":"\u003cp\u003eFor high-viscosity laboratory slurries, a three-shaft or dual-shaft vacuum mixer is the standard for achieving a truly homogeneous, bubble-free dispersion. These systems combine low-speed \"folding\" of the bulk material with high-speed \"shearing\" to break down microscopic agglomerates.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eETSDSMDPVSM (ETS-DSMDPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~2000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMixing Barrel\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 0.7-2.1 L (design volume is 2.1 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 164 mm, Depth: 100 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/8\". \u003c\/li\u003e\n\u003cli\u003eUpper barrel section: (1) 1pcs DN50 for powder feeding port; (2) 1 pcs DN50 for observation mirror port; (3) 1 pcs 1\/2\" port for liquid feeding. (4) Vacuum port size is G1\/2\"; (5) One exhaust port for vacuum pump connection; (6) One port for digital vacuum gauge installation. \u003c\/li\u003e\n\u003cli\u003eBottom barrel section: traverse distance ≤212mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSDSMDPVSM_02_160x160.png?v=1774659514\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 550 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (1 pcs): SS304, Spiral twist type, 90° helix, diameter: 83 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 5-40 rpm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: 2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 580-58000 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.8-18 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSpatula\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for slurry viscosity is \u0026lt;1.2 million cP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500 * W350 * H320 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"TOB","offers":[{"title":"Default Title","offer_id":47489220444390,"sku":"ETSDSMDPVSM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSDSMDPVSM_main.png?v=1774659166"},{"product_id":"esmfspvsm","title":"ECS-SM Four-Shaft (Two Mixing, Two Dispersing) Planetary Vacuum Slurry Mixer (2-10 L)- ESMFSPVSM","description":"\u003cp\u003eA four-shaft planetary vacuum mixer—specifically configured with two mixing (stirring) shafts and two dispersing shafts—is the gold standard for achieving sub-micron particle distribution and bubble-free homogeneity. In this setup, the mixing shafts handle the bulk movement and \"folding\" of the paste, while the high-speed dispersing shafts provide the intense shear required to break down conductive additive agglomerates (like CNTs or Carbon Black).\u003c\/p\u003e\n\u003cp\u003eIt is a precise laboratory unit designed for complex slurry preparation. It utilizes a rotation + revolution method where all four shafts revolve around the tank while spinning on their own axes, ensuring zero \"dead zones.\" (1) \u003cstrong\u003eDispersion Power\u003c\/strong\u003e: Two high-speed shafts reaching 0–3800 RPM for aggressive particle size reduction. (2) \u003cstrong\u003eStirring Efficiency\u003c\/strong\u003e: Two low-speed twist blades (2–112 RPM) move the bulk material from the walls to the dispersers. (3) \u003cstrong\u003eIntegrated Cooling\u003c\/strong\u003e: Includes a 9L water chiller to counteract the heat generated by the high-speed shafts, protecting sensitive binders like PVDF. (4) \u003cstrong\u003eSafety\u003c\/strong\u003e: PLC control with an observation window to monitor slurry consistency in real-time\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM10L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~3000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~5000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~7000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Barrel \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~2.0 L (design volume is 3.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 180 mm, Depth: 130 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available.\u003c\/li\u003e\n\u003cli\u003eA discharge valve is designed at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~5.0 L (design volume is 8.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D.240 mm, Depth: 180 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. \u003c\/li\u003e\n\u003cli\u003eA discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~10 L (design volume is 12 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 310 mm, Depth: 220 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available.\u003c\/li\u003e\n\u003cli\u003eA discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 2-112 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed:2-112 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 2-110 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-3800 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-6900 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-6000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSpatula\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSlurry Viscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL930mm×W1120mm×H1400mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL960mm×W1150mm×H2050mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL990mm×W1200mm×H2000mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~360 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~550 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~650 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"2 L","offer_id":47491649274086,"sku":"ESMFSPVSM2L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"5 L","offer_id":47491649306854,"sku":"ESMFSPVSM5L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"10 L","offer_id":47491649339622,"sku":"ESMFSPVSM10L","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_main.png?v=1774759233"},{"product_id":"essvsf","title":"ECS-SS Vacuum Slurry Filter (500mL or 2L), ESSVSF","description":"\u003cp\u003eFor laboratory battery research, a vacuum slurry filter is used immediately after mixing to remove agglomerates, undissolved gels, and extraneous particles. This ensures a \"narrow\" particle size distribution, which is critical for achieving a uniform, defect-free coating on your current collectors.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSVSF (ESS-VSF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 5-12 W\u003c\/li\u003e\n\u003cli\u003eA DC12V converter is included. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry Tank Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTank material is made of SS304\u003c\/li\u003e\n\u003cli\u003eCapacity has two versions: 750 mL and 2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMesh Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMesh 100 and 200 are included.\u003c\/li\u003e\n\u003cli\u003eMesh 150, 250, 300, 400, and 500 are available upon request. \u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e-65 KPa (a small dry-air vacuum pump is included.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL150 * W150 * H200 mm for 500 mL version\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eL150 * W150* H200 mm for 500 mL version for 2 L version\u003c\/li\u003e\n\u003cli\u003eVacuum pump size: L140 * W70* H150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL710 * W560 * H550 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~4 kg for 500 mL version\u003c\/li\u003e\n\u003cli\u003e~7 kg for 2 L version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/0957-4484\/20\/23\/235203\/meta\"\u003eJ. H. Lee, et al., Tin nanoparticle thin film electrodes fabricated by the vacuum filtration method for enhanced battery performance, Nanotechnology, 2009, 20, 235203\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.iecr.3c03586\"\u003eM. H. Jeong, et al., High-Speed Li-Ion Battery Manufacturing Process Applying the Dewatering Concept, Ind. Eng. Chem. Res. 2024, 63, 10, 4408–4419\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"500 mL","offer_id":47507923960038,"sku":"ESSVSF500","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"2 L","offer_id":47507923992806,"sku":"ESSVSF2000","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSVSF_main.png?v=1775176470"},{"product_id":"essdbehsdm","title":"ECS-SS High-Speed (10000 rpm, 150 mL) Dry Mixer with Water Cooling Jacket for Dry Battery Electrode- ESSDBEHSDM","description":"\u003cp\u003eFor Dry Battery Electrode (DBE) technology, the High-Speed Dry Mixer replaces the traditional NMP-based planetary mixer. Its primary function is no longer just \"blending\" but \"Fibrillation\"—the mechanical process of stretching PTFE (Polytetrafluoroethylene) binder particles into a microscopic 3D web that binds the active material together.\u003c\/p\u003e\n\u003cp\u003eDry electrode mixing relies on high-shear collision. (1) \u003cstrong\u003eDry Powder Loading\u003c\/strong\u003e: Active material (NMC\/LFP), conductive carbon (Super P\/CNTs), and PTFE binder are loaded as dry powders (typically 5–10% binder). (2) \u003cstrong\u003eShear Force\u003c\/strong\u003e: High-speed impellers (running at 3,000 to 10,000 RPM) create intense mechanical shear. (3) \u003cstrong\u003ePTFE Activation\u003c\/strong\u003e: Under this shear and the heat generated by friction, the spherical PTFE particles undergo a phase transition, \"uncoiling\" into ultra-fine fibrils.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSDBEHSDM (ESS-DBE-HSDM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 600 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMixing Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMixing Speed: 10000 rpm (adjustable)\u003c\/li\u003e\n\u003cli\u003eMixing Time: 0-30 min (adjustable)\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the mixing speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMixing Tank Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eProcessing Volume: Max. 150 mL (suggested)\u003c\/li\u003e\n\u003cli\u003eA sharp blade set is in the mixing tank. If the powder is not enough, then the blade may not be touching the bottom powder. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSDBEHSDM_02_100x100.png?v=1775776440\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA water chiller (eg: \u003ca href=\"https:\/\/echemsupplies.com\/products\/eadtcwc?variant=47528488698086\"\u003eEADTCWC\u003c\/a\u003e) should be connected with the cooling jacket to maintain10-15 °C for partial fibrillation of PTFE. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/eadtcwc?variant=47528488698086\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EADTCWC_main_100x100.png?v=1775781572\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL350 * W280 * H480 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~16 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S037877532300842X\"\u003eA. Yonaga, et al., Effects of dry powder mixing on electrochemical performance of lithium-ion battery electrode using solvent-free dry forming process, J. Power Sources, 2023, 581, 233466\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/full\/10.1021\/acsaem.2c03755\"\u003eA. Gyulai, et al., Dry Electrode Manufacturing in a Calender: The Role of Powder Premixing for Electrode Quality and Electrochemical Performance, ACS Appl. Energy Mater. 2023, 6, 10, 5122–5134\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47527263895782,"sku":"ESSDBEHSDM","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSDBEHSDM_main.png?v=1775776424"},{"product_id":"eadtcwc","title":"Digital Temperature-Controlled Water Chiller with High Cooling Capacity (870W-3750W), EADTCWC","description":"\u003cp\u003eIn a battery R\u0026amp;D environment, a Small Industrial Water Chiller is an essential piece of support infrastructure. It is the \"thermal sink\" that protects your high-end fabrication equipment and ensures that the heat generated by your processes doesn't skew your experimental data.\u003c\/p\u003e\n\u003cp\u003e(1) \u003cstrong\u003eHigh-Speed Dry Mixers\u003c\/strong\u003e: Friction from the 10,000 RPM impellers generates massive heat. If the powder exceeds 70°C, the PTFE binder can \"over-cure\" and fail. The chiller circulates cold water through the mixer's jacketed tank to keep the \"battery dough\" at a stable 25°C – 30°C.\u003c\/p\u003e\n\u003cp\u003e(2) \u003cstrong\u003eHot Rolling Presses (Calendering)\u003c\/strong\u003e: While the rollers are heated, the hydraulic system and the bearings must be cooled to prevent oil degradation and mechanical expansion that would ruin your ±1 um gap precision. Cools the hydraulic fluid and prevents heat creep from the rollers into the machine's structural frame.\u003c\/p\u003e\n\u003cp\u003e(3) \u003cstrong\u003eSlot-Die Coater (UV Curing or Condensation)\u003c\/strong\u003e: If you are using UV-curing for your ion-exchange membranes, the UV lamps generate intense infrared heat that can melt your thin films. It cools the UV lamp housings and the \"chill roll\" used to stabilize the web temperature before rewinding.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px; width: 100.036%;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9791%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEADTCWC5000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEADTCWC5300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEADTCWC6000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or AC220V±10%, single phase, 50\/60Hz, ~500W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~1200W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~1800W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003cem\u003eCooling Capacity\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e870W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1750W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e3750W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003cem\u003eCompressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.34 P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.8 P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1.5 P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003cem\u003eWater Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e30W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e88W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e88w\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003cem\u003eWater Tank Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e6 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e9 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e16 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003cem\u003eFlow Rate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e13 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e25 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e25 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003cem\u003ePump Lift\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e13 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e25 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e25 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL560 * W285 * H470 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL465 * W350 * H400 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL630 * W475 * H880 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9791%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6329%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~10 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~32 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.3164%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~65 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"JGLSJ","offers":[{"title":"CW5000","offer_id":47528488698086,"sku":"EADTCWC5000","price":599.0,"currency_code":"USD","in_stock":true},{"title":"CW5300","offer_id":47528488730854,"sku":"EADTCWC5300","price":799.0,"currency_code":"USD","in_stock":true},{"title":"CW6000","offer_id":47528709357798,"sku":"EADTCWC6000","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EADTCWC_main.png?v=1775781572"},{"product_id":"esldbehsdm","title":"ECS-SL High-Speed Dry Mixer (Max. 6000 rpm, 5 L) with Water Cooling Jacket for Dry Battery Electrode- ESLDBEHSDM","description":"\u003cp\u003eFor Dry Battery Electrode (DBE) technology, the High-Speed Dry Mixer replaces the traditional NMP-based planetary mixer. Its primary function is no longer just \"blending\" but \"Fibrillation\"—the mechanical process of stretching PTFE (Polytetrafluoroethylene) binder particles into a microscopic 3D web that binds the active material together.\u003c\/p\u003e\n\u003cp\u003eDry electrode mixing relies on high-shear collision. (1) \u003cstrong\u003eDry Powder Loading\u003c\/strong\u003e: Active material (NMC\/LFP), conductive carbon (Super P\/CNTs), and PTFE binder are loaded as dry powders (typically 5–10% binder). (2) \u003cstrong\u003eShear Force\u003c\/strong\u003e: High-speed impellers (running at 3,000 to 10,000 RPM) create intense mechanical shear. (3) \u003cstrong\u003ePTFE Activation\u003c\/strong\u003e: Under this shear and the heat generated by friction, the spherical PTFE particles undergo a phase transition, \"uncoiling\" into ultra-fine fibrils.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLDBEHSDM (ESL-DBE-HSDM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, three-phases, 50\/60Hz, 3000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMixing Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMixing Rotation Speed: Max. 6000 rpm (adjustable), which corresponds the line speed of 56 m\/s\u003c\/li\u003e\n\u003cli\u003eMixing Time: 0-30 min (adjustable)\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the mixing speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMixing Tank Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMixing Tank Volume: Max. 5 L (tank size: D200mm * H200mm)\u003c\/li\u003e\n\u003cli\u003eTwo sets of sharp blades are designed in the mixing tank. The powder amount should cover the blade surface to achieve high mixing quality. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLDBEHSDM_02_100x100.png?v=1775795599\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA water chiller (eg: \u003ca href=\"https:\/\/echemsupplies.com\/products\/eadtcwc?variant=47528488698086\"\u003eEADTCWC\u003c\/a\u003e) with flow rate (≥60 L\/min) should be connected with the cooling jacket to maintain10-15 °C for partial fibrillation of PTFE. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/eadtcwc?variant=47528488698086\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EADTCWC_main_100x100.png?v=1775781572\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to provide a gas pressure of 60-80 psi for pneumatic sealing operation \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL800 * W600 * H1250 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~160 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S037877532300842X\"\u003eA. Yonaga, et al., Effects of dry powder mixing on electrochemical performance of lithium-ion battery electrode using solvent-free dry forming process, J. Power Sources, 2023, 581, 233466\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/full\/10.1021\/acsaem.2c03755\"\u003eA. Gyulai, et al., Dry Electrode Manufacturing in a Calender: The Role of Powder Premixing for Electrode Quality and Electrochemical Performance, ACS Appl. Energy Mater. 2023, 6, 10, 5122–5134\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47529517187302,"sku":"ESLDBEHSDM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLDBEHSDM_main.png?v=1775795232"},{"product_id":"efsmpbm","title":"ECS-FS Mini Planetary Ball Mill (1000 rpm, 4*100 mL), (Ar-Filled Glovebox-Compatible)- EFSMPBM","description":"\u003cp\u003ea Mini Planetary Ball Mill is a foundational too that used to reduce the particle size of active materials (like LFP or NMC) and to ensure a truly homogeneous dispersion of conductive additives (CNTs\/Carbon Black) before the coating process. In a planetary mill, the grinding jars are arranged \"planetarily\" on a rotating sun wheel. The jars rotate in the opposite direction to the sun wheel, creating high-energy centrifugal forces that result in intensive mixing and grinding.\u003c\/p\u003e\n\u003cp\u003eTraditional ball mills rely on gravity, which is too slow for nano-scale battery materials. Planetary mills provide: (1) \u003cstrong\u003eHigh Energy Densit\u003c\/strong\u003ey: The acceleration can exceed 20g to 50g allowing you to achieve sub-micron particle sizes in minutes rather than hours. (2) \u003cstrong\u003eMechanical Alloying\u003c\/strong\u003e: It is excellent for \"coating\" active material particles with conductive carbon. (3) \u003cstrong\u003eUniformity\u003c\/strong\u003e: The multidimensional motion prevents material from \"settling\" at the bottom of the jar.\u003c\/p\u003e\n\u003cp\u003eBasical working mechanism for planetary ball mill:\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSMPBM_02_160x160.png?v=1776023914\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSMPBM (EFS-MPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 150 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 1000 rpm (adjustable). The corresponding revolution speed is 500 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 100 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 400 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide, PTFE, Nylon, Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003eEFSAMJ100\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-SS304_100x100.png?v=1776052645\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-WC_100x100.png?v=1776052645\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-ZrO2_100x100.png?v=1776052645\"\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-PTFE_100x100.png?v=1776052645\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Nylon_100x100.png?v=1776052645\"\u003e  \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Agate_100x100.png?v=1776052645\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavmj50?variant=47534580728038\"\u003eEFSAVMJ50\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-SS304_100x100.png?v=1776057829\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Nylon_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-PTFE_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e       \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-ZrO2_100x100.png?v=1776057940\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-WC_100x100.png?v=1776057940\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Agate_100x100.png?v=1776057829\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 2 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL300 * W370 * H300 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47534093238502,"sku":"EFSMPBM","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSMPBM_main.png?v=1776023914"},{"product_id":"efsamj100","title":"100 mL Milling Jars for Mini Planetary Ball Mill (EFSMPBM)- EFSAMJ100","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSAMJ100 (EFS-A-MJ100)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eJar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e100 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eJar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Milling Jar \u003c\/li\u003e\n\u003cli\u003e(3) PTFE Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) Tungsten Carbide (WC) Milling Jar\u003c\/li\u003e\n\u003cli\u003e(6) Agate Milling Jar \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e      The milling ball material is the same with that of the milling jar. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are for mini planetary ball mill \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsmpbm?variant=47534093238502\"\u003eEFSMPBM\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Milling Jar","offer_id":47534558740710,"sku":"EFSAMJ100SS304","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Nylon Milling Jar","offer_id":47534558839014,"sku":"EFSAMJ100N","price":159.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Milling Jar","offer_id":47534558806246,"sku":"EFSAMJ100PTFE","price":159.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Milling Jar","offer_id":47534558675174,"sku":"EFSAMJ100ZrO2","price":659.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Milling Jar","offer_id":47534558707942,"sku":"EFSAMJ100WC","price":1099.0,"currency_code":"USD","in_stock":true},{"title":"Agate Milling Jar","offer_id":47534558773478,"sku":"EFSAMJ100A","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-WC.png?v=1776052645"},{"product_id":"efshmpbm","title":"ECS-FS Horizontal Mini Planetary Ball Mill (1000 rpm, 4*100 mL), (Ar-Filled Glovebox-Compatible)- EFSHMPBM","description":"\u003cp\u003eA Horizontal Planetary Ball Mill represents a structural evolution of the traditional vertical planetary mill. While vertical mills are the standard for benchtop R\u0026amp;D, horizontal configurations are often preferred for larger-scale pilot production or when dealing with slurries that have a high tendency to settle, such as the high-solids NMP-based cathode slurries. In a horizontal mill, the grinding jars are placed horizontally on the sun wheel. As the system rotates, the force of gravity is constantly changing direction relative to the centrifugal forces, creating a unique \"3D\" grinding path.\u003c\/p\u003e\n\u003cp\u003eThe horizontal orientation solves several specific issues encountered during the preparation of advanced battery materials: (1) \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eElimination of Sedimentation\u003c\/strong\u003e: In vertical jars, heavy active material particles (like NMC or LFP) can settle at the bottom of the jar during long milling cycles, leading to non-uniform grinding. In a horizontal mill, gravity prevents \"dead zones\" at the bottom, ensuring the entire batch is processed equally\u003c\/span\u003e. (2) \u003cstrong\u003eEnhanced Mixing Energy\u003c\/strong\u003e: The combination of the planetary motion and the constant \"tumbling\" caused by the horizontal axis creates higher kinetic energy. This is particularly effective for dispersing Carbon Nanotubes (CNTs), which are notoriously difficult to unbundle. (3) \u003cstrong\u003eThermal Management\u003c\/strong\u003e: Horizontal designs often allow for easier integration of liquid cooling systems across the jars, which is critical when processing temperature-sensitive ion-exchange membranes or PTFE-based dry powders.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSHMPBM (EFS-HMPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 150 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eMain feature: \u003cstrong\u003eElimination of Sedimentation\u003c\/strong\u003e during ball milling process\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 1000 rpm (adjustable). The corresponding revolution speed is 500 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 100 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 400 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003eEFSAMJ100\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-SS304_100x100.png?v=1776052645\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-WC_100x100.png?v=1776052645\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-ZrO2_100x100.png?v=1776052645\"\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-PTFE_100x100.png?v=1776052645\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Nylon_100x100.png?v=1776052645\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Agate_100x100.png?v=1776052645\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavmj50?variant=47534580728038\"\u003eEFSAVMJ50\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-SS304_100x100.png?v=1776057829\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Nylon_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-PTFE_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-ZrO2_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-WC_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Agate_100x100.png?v=1776057829\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 2 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL300 * W350 * H420 mm (Ar-filled glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47534572667110,"sku":"EFSHMPBM","price":3199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSHMPBM_main.png?v=1776064107"},{"product_id":"efsavmj50","title":"50 mL Vacuum Milling Jars for Mini Planetary Ball Mill- EFSAVMJ50","description":"\u003cp\u003eA Vacuum Milling Jar is a specialized version of the standard grinding jar, designed to maintain a hermetically sealed environment. It allows to process materials that are highly sensitive to oxygen and moisture without the need to house the entire ball mill inside a glovebox.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSAVMJ50 (EFS-A-VMJ50)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Milling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eVacuum Milling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Vacuum Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Vacuum Milling Jar \u003c\/li\u003e\n\u003cli\u003e(3) PTFE Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Zirconia (ZrO2) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) Tungsten Carbide (WC) Vacuum Milling Jar\u003c\/li\u003e\n\u003cli\u003e(6) Agate Vacuum Milling Jar \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e      Normally the milling ball material is the same with that of the milling jar. As for the Nylon, PTFE, Agate milling jar, the ZrO2 milling balls are provided. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are for mini planetary ball mill \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsmpbm?variant=47534093238502\"\u003eEFSMPBM\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Vacuum Milling Jar","offer_id":47534580728038,"sku":"EFSAVMJ50SS304","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Nylon Vacuum Milling Jar","offer_id":47534580760806,"sku":"EFSAVMJ50N","price":659.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Vacuum Milling Jar","offer_id":47534580793574,"sku":"EFSAVMJ50PTFE","price":659.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Vacuum Milling Jar","offer_id":47534580826342,"sku":"EFSAVMJ50ZrO2","price":1199.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Vacuum Milling Jar","offer_id":47534580859110,"sku":"EFSAVMJ50WC","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Agate Vacuum Milling Jar","offer_id":47534580891878,"sku":"EFSAVMJ50A","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-SS304.png?v=1776057829"},{"product_id":"efmmhepbm","title":"ECS-FM Mini High-Energy Planetary Ball Mill (800 rpm, 4*500 mL), (Ar-Filled Glovebox-Compatible)- EFMMHEPBM","description":"\u003cp\u003eA mini high-energy planetary ball mill is a compact, benchtop instrument designed for rapid particle size reduction down to the nano-scale (\u0026lt;100 nm) and high-shear mixing. The \"high-energy\" designation typically refers to the ability to reach high rotational speeds (up to 1100 RPM), which generates the centrifugal forces necessary to break down resilient aggregates.\u003c\/p\u003e\n\u003cp\u003eIn a planetary ball mill, the grinding jars are mounted on a \"sun wheel.\" As the sun wheel rotates, the jars rotate in the opposite direction on their own axes. (1) \u003cstrong\u003eEnergy Transfer\u003c\/strong\u003e: This counter-rotation creates a powerful interaction between centrifugal and Coriolis forces. (2) \u003cstrong\u003eMedia Motion\u003c\/strong\u003e: The grinding balls are launched across the jar (cataracting) to strike the material with high impact energy, while also rolling against the walls (cascading) to provide intensive friction and shear.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMMHEPBM (EFM-MHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 800 rpm (adjustable). The corresponding revolution speed is 400 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL430 * W490 * H420 mm (Ar-filled glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~92 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47534743159014,"sku":"EFMMHEPBM","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMMHEPBM_main.png?v=1776068665"},{"product_id":"efmamj500","title":"500 mL Milling Jars for High-Energy Planetary Ball Mill, EFMAMJ500","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMAMJ500 (EFM-A-MJ500)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eJar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e500 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eJar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Milling Jar \u003c\/li\u003e\n\u003cli\u003e(3) PTFE Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) Tungsten Carbide (WC) Milling Jar\u003c\/li\u003e\n\u003cli\u003e(6) Agate Milling Jar \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e      The milling ball material is the same with that of the milling jar. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are for mini planetary ball mill EFMMHEPBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Milling Jar","offer_id":47534771077350,"sku":"EFMAMJ500SS304","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Nylon Milling Jar","offer_id":47534771110118,"sku":"EFMAMJ500N","price":239.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Milling Jar","offer_id":47534771142886,"sku":"EFMAMJ500PTFE","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Milling Jar","offer_id":47534771175654,"sku":"EFMAMJ500ZrO2","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Milling Jar","offer_id":47534771208422,"sku":"EFMAMJ500WC","price":2899.0,"currency_code":"USD","in_stock":true},{"title":"Agate Milling Jar","offer_id":47534771241190,"sku":"EFMAMJ500A","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304.png?v=1776066642"},{"product_id":"efmavmj250","title":"250 mL Vacuum Milling Jars for High-Energy Planetary Ball Mill- EFMAVMJ250","description":"\u003cp\u003eA Vacuum Milling Jar is a specialized version of the standard grinding jar, designed to maintain a hermetically sealed environment. It allows to process materials that are highly sensitive to oxygen and moisture without the need to house the entire ball mill inside a glovebox.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMAVMJ250 (EFM-A-VMJ250)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Milling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e250 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eVacuum Milling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Vacuum Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Vacuum Milling Jar \u003c\/li\u003e\n\u003cli\u003e(3) PTFE Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Zirconia (ZrO2) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) Tungsten Carbide (WC) Vacuum Milling Jar\u003c\/li\u003e\n\u003cli\u003e(6) Agate Vacuum Milling Jar \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e      Normally the milling ball material is the same with that of the milling jar. As for the Nylon, PTFE, milling jar, the ZrO2 milling balls are provided. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are for mini planetary ball mill \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmmhepbm?variant=47534743159014\"\u003eEFMMHEPBM\u003c\/a\u003e, \u003ca href=\"https:\/\/echemsupplies.com\/products\/efm3dhepbm?variant=47535512158438\"\u003eEFM3DHEPBM\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Vacuum Milling Jar","offer_id":47534833139942,"sku":"EFSAVMJ50SS304","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Nylon Vacuum Milling Jar","offer_id":47534833172710,"sku":"EFSAVMJ50N","price":659.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Vacuum Milling Jar","offer_id":47534833205478,"sku":"EFSAVMJ50PTFE","price":659.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Vacuum Milling Jar","offer_id":47534833238246,"sku":"EFSAVMJ50ZrO2","price":1199.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Vacuum Milling Jar","offer_id":47534833271014,"sku":"EFSAVMJ50WC","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Agate Vacuum Milling Jar","offer_id":47534833303782,"sku":"EFSAVMJ50A","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304.png?v=1776067691"},{"product_id":"efm3dhepbm","title":"ECS-FM Three-Dimensional (3D) High-Energy Planetary Ball Mill (800 rpm, 4*500 mL)- EFM3DHEPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFM3DHEPBM (EFM-3DHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 870 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): Max. 800 rpm (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 3-10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1120 * W685 * H780 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~233 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47535512158438,"sku":"EFM3DHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFM3DHEPBM_main.png?v=1776095626"},{"product_id":"efmhhepbm","title":"ECS-FM Horizontal High-Energy Planetary Ball Mill (800 rpm, 4*500 mL)- EFMHHEPBM","description":"\u003cp\u003eA Horizontal Planetary Ball Mill represents a structural evolution of the traditional vertical planetary mill. While vertical mills are the standard for benchtop R\u0026amp;D, horizontal configurations are often preferred for larger-scale pilot production or when dealing with slurries that have a high tendency to settle, such as the high-solids NMP-based cathode slurries. In a horizontal mill, the grinding jars are placed horizontally on the sun wheel. As the system rotates, the force of gravity is constantly changing direction relative to the centrifugal forces, creating a unique \"3D\" grinding path.\u003c\/p\u003e\n\u003cp\u003eThe horizontal orientation solves several specific issues encountered during the preparation of advanced battery materials: (1) \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eElimination of Sedimentation\u003c\/strong\u003e: In vertical jars, heavy active material particles (like NMC or LFP) can settle at the bottom of the jar during long milling cycles, leading to non-uniform grinding. In a horizontal mill, gravity prevents \"dead zones\" at the bottom, ensuring the entire batch is processed equally\u003c\/span\u003e. (2) \u003cstrong\u003eEnhanced Mixing Energy\u003c\/strong\u003e: The combination of the planetary motion and the constant \"tumbling\" caused by the horizontal axis creates higher kinetic energy. This is particularly effective for dispersing Carbon Nanotubes (CNTs), which are notoriously difficult to unbundle. (3) \u003cstrong\u003eThermal Management\u003c\/strong\u003e: Horizontal designs often allow for easier integration of liquid cooling systems across the jars, which is critical when processing temperature-sensitive ion-exchange membranes or PTFE-based dry powders.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMHHEPBM (EFM-HHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eThe jars are horizontally placed (planetary moving along Y-axis), which is able to \u003cstrong\u003eEliminate the sedimentation in \"dead area\"\u003c\/strong\u003e during ball milling process. \u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. 800 rpm (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 400 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W560 * H510 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~106 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47535800778982,"sku":"EFMHHEPBM","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHHEPBM_main.png?v=1776100649"},{"product_id":"eflamj1000","title":"1000 mL Milling Jars for Large High-Energy Planetary Ball Mill- EFLAMJ1000","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLAMJ1000 (EFL-A-MJ1000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eJar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e500 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eJar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Milling Jar \u003c\/li\u003e\n\u003cli\u003e(3) PTFE Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) Tungsten Carbide (WC) Milling Jar\u003c\/li\u003e\n\u003cli\u003e(6) Agate Milling Jar \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e      The milling ball material is the same with that of the milling jar. For nylon and PTFE milling jars, the milling balls are ZrO2 material.  \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are for large planetary ball mill EFLHEPBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Milling Jar","offer_id":47537924276454,"sku":"EFLAMJ1000SS304","price":299.0,"currency_code":"USD","in_stock":true},{"title":"Nylon Milling Jar","offer_id":47537924309222,"sku":"EFLAMJ1000N","price":349.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Milling Jar","offer_id":47537924341990,"sku":"EFLAMJ1000PTFE","price":469.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Milling Jar","offer_id":47537924374758,"sku":"EFLAMJ1000ZrO2","price":2299.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Milling Jar","offer_id":47537924407526,"sku":"EFLAMJ1000WC","price":3999.0,"currency_code":"USD","in_stock":true},{"title":"Agate Milling Jar","offer_id":47537924440294,"sku":"EFLAMJ1000A","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-SS304.png?v=1776140326"},{"product_id":"eflavmj500","title":"500 mL Vacuum Milling Jars for Large High-Energy Planetary Ball Mill- EFLAVMJ500","description":"\u003cp\u003eA Vacuum Milling Jar is a specialized version of the standard grinding jar, designed to maintain a hermetically sealed environment. It allows to process materials that are highly sensitive to oxygen and moisture without the need to house the entire ball mill inside a glovebox.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLAVMJ500 (EFL-A-VMJ500)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Milling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e500 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eVacuum Milling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Vacuum Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Vacuum Milling Jar \u003c\/li\u003e\n\u003cli\u003e(3) PTFE Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Zirconia (ZrO2) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) Tungsten Carbide (WC) Vacuum Milling Jar\u003c\/li\u003e\n\u003cli\u003e(6) Agate Vacuum Milling Jar \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e      Normally the milling ball material is the same with that of the milling jar. As for the Nylon, PTFE, milling jar, the ZrO2 milling balls are provided. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are for mini planetary ball mill EFLHEPBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Vacuum Milling Jar","offer_id":47537998921958,"sku":"EFLAVMJ500SS304","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Nylon Vacuum Milling Jar","offer_id":47537998954726,"sku":"EFLAVMJ500N","price":889.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Vacuum Milling Jar","offer_id":47537998987494,"sku":"EFLAVMJ500PTFE","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Vacuum Milling Jar","offer_id":47537999020262,"sku":"EFLAVMJ500ZrO2","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Vacuum Milling Jar","offer_id":47537999053030,"sku":"EFLAVMJ500WC","price":3699.0,"currency_code":"USD","in_stock":true},{"title":"Agate Vacuum Milling Jar","offer_id":47537999085798,"sku":"EFLAVMJ500A","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304.png?v=1776141855"},{"product_id":"eflhepbm","title":"ECS-FL High-Energy Planetary Ball Mill (800 rpm, 4*1000 mL) - EFLHEPBM","description":"\u003cp\u003eA high-energy planetary ball mill is a compact, benchtop instrument designed for rapid particle size reduction down to the nano-scale (\u0026lt;100 nm) and high-shear mixing. The \"high-energy\" designation typically refers to the ability to reach high rotational speeds (up to 1100 RPM), which generates the centrifugal forces necessary to break down resilient aggregates.\u003c\/p\u003e\n\u003cp\u003eIn a planetary ball mill, the grinding jars are mounted on a \"sun wheel.\" As the sun wheel rotates, the jars rotate in the opposite direction on their own axes. (1) \u003cstrong\u003eEnergy Transfer\u003c\/strong\u003e: This counter-rotation creates a powerful interaction between centrifugal and Coriolis forces. (2) \u003cstrong\u003eMedia Motion\u003c\/strong\u003e: The grinding balls are launched across the jar (cataracting) to strike the material with high impact energy, while also rolling against the walls (cascading) to provide intensive friction and shear.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLHEPBM (EFL-HEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 800 rpm (adjustable). The corresponding revolution speed is 400 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflamj1000?variant=47537924276454\"\u003eEFLAMJ1000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-SS304_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Nylon_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-PTFE_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-ZrO2_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-WC_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Agate_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavmj500?variant=47537998921958\"\u003eEFLAVMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e        \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W500 * H500 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~106 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538007179494,"sku":"EFLHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLHEPBM_main.png?v=1776144504"},{"product_id":"efl3dhepbm","title":"ECS-FL Three-Dimensional (3D) High-Energy Planetary Ball Mill (800 rpm, 4*1000 mL)- EFL3DHEPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFL3DHEPBM (EFL-3DHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 870 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): Max. 800 rpm (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 3-10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflamj1000?variant=47537924276454\"\u003eEFLAMJ1000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-SS304_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Nylon_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-PTFE_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-ZrO2_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-WC_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Agate_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1120 * W685 * H780 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~242 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538032410854,"sku":"EFL3DHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFL3DHEPBM_main.png?v=1776146264"},{"product_id":"eflhhepbm","title":"ECS-FL Horizontal High-Energy Planetary Ball Mill (800 rpm, 4*1000 mL)- EFLHHEPBM","description":"\u003cp\u003eA Horizontal Planetary Ball Mill represents a structural evolution of the traditional vertical planetary mill. While vertical mills are the standard for benchtop R\u0026amp;D, horizontal configurations are often preferred for larger-scale pilot production or when dealing with slurries that have a high tendency to settle, such as the high-solids NMP-based cathode slurries. In a horizontal mill, the grinding jars are placed horizontally on the sun wheel. As the system rotates, the force of gravity is constantly changing direction relative to the centrifugal forces, creating a unique \"3D\" grinding path.\u003c\/p\u003e\n\u003cp\u003eThe horizontal orientation solves several specific issues encountered during the preparation of advanced battery materials: (1) \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eElimination of Sedimentation\u003c\/strong\u003e: In vertical jars, heavy active material particles (like NMC or LFP) can settle at the bottom of the jar during long milling cycles, leading to non-uniform grinding. In a horizontal mill, gravity prevents \"dead zones\" at the bottom, ensuring the entire batch is processed equally\u003c\/span\u003e. (2) \u003cstrong\u003eEnhanced Mixing Energy\u003c\/strong\u003e: The combination of the planetary motion and the constant \"tumbling\" caused by the horizontal axis creates higher kinetic energy. This is particularly effective for dispersing Carbon Nanotubes (CNTs), which are notoriously difficult to unbundle. (3) \u003cstrong\u003eThermal Management\u003c\/strong\u003e: Horizontal designs often allow for easier integration of liquid cooling systems across the jars, which is critical when processing temperature-sensitive ion-exchange membranes or PTFE-based dry powders.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLHHEPBM (EFL-HHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eThe jars are horizontally placed (planetary moving along Y-axis), which is able to \u003cstrong\u003eEliminate the sedimentation in \"dead area\"\u003c\/strong\u003e during ball milling process. \u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. 800 rpm (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflamj1000?variant=47537924276454\"\u003eEFLAMJ1000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-SS304_100x100.png?v=1776140326\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Nylon_100x100.png?v=1776140326\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-PTFE_100x100.png?v=1776140326\"\u003e\u003c\/p\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-ZrO2_100x100.png?v=1776140326\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-WC_100x100.png?v=1776140326\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Agate_100x100.png?v=1776140326\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavmj500?variant=47537998921958\"\u003eEFLAVMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W560 * H510 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~115 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538052497638,"sku":"EFLHHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLHHEPBM_main.png?v=1776146251"},{"product_id":"efmhsppbm","title":"ECS-FM High-Speed \u0026 Powerful Planetary Ball Mill (1200 rpm, 4*500 mL)- EFMHSPPBM","description":"\u003cp\u003eA high-speed unit typically operates between 800 and 1100 RPM, generating the massive G-forces required for nano-milling and mechanical alloying.\u003c\/p\u003e\n\u003cp\u003eIn a planetary mill, the jars rotate in the opposite direction to the sun wheel. As you increase the RPM, the energy delivered to your material increases exponentially. (1) \u003cstrong\u003eImpact Energy\u003c\/strong\u003e: At 1000 RPM, the grinding balls (typically Zirconia) are launched with enough kinetic energy to break the primary crystal bonds of hard ceramic electrolytes like YSZ or BZCYYb. (2) \u003cstrong\u003eShear Intensity\u003c\/strong\u003e: The high rotational velocity creates intense friction between the balls and the jar wall. This is critical for unbundling Carbon Nanotubes (CNTs) and achieving a perfect \"percolating network\" in your NMP-based slurries.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMHSPPBM (EFM-HSPPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1200 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall milling in vacuum or inert gas environment is feasible. \u003c\/li\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eJar Number Upgrade (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIf customer want to upgrade the jar number from 4 to 6, we can supply it as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_04_100x100.png?v=1776183857\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_05_100x100.png?v=1776183857\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~326 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538084446438,"sku":"EFMHSPPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_main.png?v=1776148300"},{"product_id":"efsuhsmpbm","title":"ECS-FS Ultra-High-Speed Mini Planetary Ball Mill (2200 rpm, 2*100 mL) (Ar-Filled Glovebox Compatible), EFSUHSMPBM","description":"\u003cp\u003eA planetary ball mill reaching 2200 RPM represents the extreme upper limit of mechanical milling technology. While standard high-speed mills typically top out at 1100 RPM, a 2200 RPM system is a specialized \"Ultra-High Energy\" instrument designed for mechano-chemistry, nano-phase synthesis, and rapid mechanical alloying.\u003c\/p\u003e\n\u003cp\u003eAt 2200 RPM, the centrifugal acceleration can reach over 100g (100 times the force of gravity). (1) \u003cstrong\u003eImpact Power\u003c\/strong\u003e: The kinetic energy (Ek =1\/2mv^2) increases with the square of the velocity. Doubling the speed from 1100 to 2200 RPM results in four times the impact energy. (2) \u003cstrong\u003eMilling Time\u003c\/strong\u003e: Processes that take 4 hours in a standard mill can often be completed in 15–30 minutes, significantly increasing your R\u0026amp;D throughput.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSUHSMPBM (EFS-UHSPPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or AC220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e2200 rpm\u003c\/span\u003e (adjustable, the corresponding revolution speed is 1100 rpm).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: 100 mL\/each (2 jars for operation balance). The maximum processing capacity is 200 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall milling in vacuum or inert gas environment is feasible. \u003c\/li\u003e\n\u003cli\u003eSealed or Vacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsasmj?variant=47538252546278\"\u003eEFSASMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e     \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ100-SS304_100x100.png?v=1776154853\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ80-PTFE_100x100.png?v=1776154853\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ80-ZrO2_100x100.png?v=1776154854\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ80-WC_100x100.png?v=1776154854\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 2 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL360 * W480 * H340 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~45 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538114855142,"sku":"EFSUHSMPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSUHSMPBM_main.png?v=1776155690"},{"product_id":"efsasmj","title":"Sealed Milling Jars (80 or 100 mL) for Ultra-High-Speed Mini Planetary Ball Mill- EFSASMJ","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSASMJ (EFS-A-SMJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eJar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e80 or 100 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eJar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) PTFE Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(3) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Tungsten Carbide (WC) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe milling ball material is the same with that of the milling jar. For PTFE milling jars, the milling balls are ZrO2 material.  \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for ultra-high-speed mini planetary ball mill EFSUHSMPBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"100 mL Stainless Steel (SS304) Milling Jar","offer_id":47538252546278,"sku":"EFSASMJ100SS304","price":499.0,"currency_code":"USD","in_stock":true},{"title":"80 mL PTFE Milling Jar","offer_id":47538252611814,"sku":"EFSASMJ80PTFE","price":599.0,"currency_code":"USD","in_stock":true},{"title":"80 mL Zirconia (ZrO2) Milling Jar","offer_id":47538252644582,"sku":"EFSASMJ80ZrO2","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"80 mL Tungsten Carbide (WC) Milling Jar","offer_id":47538252677350,"sku":"EFSASMJ80WC","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ100-SS304.png?v=1776156169"},{"product_id":"efsm3dpbm","title":"ECS-FS Mini Three-Dimensional (3D) Planetary Ball Mill (900 rpm, 4*100 mL), EFSM3DPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSM3DPBM (EFS-M3DPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 370 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 900 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 100 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003eEFSAMJ100\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-SS304_100x100.png?v=1776052645\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-WC_100x100.png?v=1776052645\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-ZrO2_100x100.png?v=1776052645\"\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-PTFE_100x100.png?v=1776052645\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Nylon_100x100.png?v=1776052645\"\u003e  \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Agate_100x100.png?v=1776052645\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavmj50?variant=47534580728038\"\u003eEFSAVMJ50\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-SS304_100x100.png?v=1776057829\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Nylon_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-PTFE_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-ZrO2_100x100.png?v=1776057940\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-WC_100x100.png?v=1776057940\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Agate_100x100.png?v=1776057829\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 2 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W500 * H500 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~66 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538966659302,"sku":"EFSM3DPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSM3DPBM_main.png?v=1776182327"},{"product_id":"eflhsppbm","title":"ECS-FL High-Speed \u0026 Powerful Planetary Ball Mill (1200 rpm, 4*1000 mL), EFLHSPPBM","description":"\u003cp\u003eA high-speed unit typically operates between 800 and 1100 RPM, generating the massive G-forces required for nano-milling and mechanical alloying.\u003c\/p\u003e\n\u003cp\u003eIn a planetary mill, the jars rotate in the opposite direction to the sun wheel. As you increase the RPM, the energy delivered to your material increases exponentially. (1) \u003cstrong\u003eImpact Energy\u003c\/strong\u003e: At 1000 RPM, the grinding balls (typically Zirconia) are launched with enough kinetic energy to break the primary crystal bonds of hard ceramic electrolytes like YSZ or BZCYYb. (2) \u003cstrong\u003eShear Intensity\u003c\/strong\u003e: The high rotational velocity creates intense friction between the balls and the jar wall. This is critical for unbundling Carbon Nanotubes (CNTs) and achieving a perfect \"percolating network\" in your NMP-based slurries.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLHSPPBM (EFL-HSPPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1200 rpm\u003c\/span\u003e (adjustable, the corresponding maximum revolution speed is 600 rpm). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall milling in vacuum or inert gas environment is feasible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavmj500?variant=47537998921958\"\u003eEFLAVMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 20 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~336 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539057098982,"sku":"EFLHSPPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLHSPPBM_main.png?v=1776183614"},{"product_id":"efmplipbm","title":"ECS-FM Light-Illuminated Planetary Ball Mill (900 rpm, 4*500 mL) for Photocatalysis, EFMPLIPBM","description":"\u003cp\u003eA Light-Illuminated Planetary Ball Mill (often called a Photo-Planetary Mill) is a specialized instrument that merges mechanochemistry with photocatalysis. For a researcher focused on advanced energy materials, this setup allows to drive chemical reactions through the simultaneous application of high-energy mechanical impact and photon excitation.\u003c\/p\u003e\n\u003cp\u003eWhile a standard planetary mill uses centrifugal force to provide kinetic energy, the illuminated version introduces an optical path into the grinding chamber. (1) \u003cstrong\u003eMechanical Activation\u003c\/strong\u003e: The high-speed rotation (typically up to 1100 RPM) creates fresh, highly reactive \"nascent\" surfaces on the catalyst particles by constantly breaking and reforming chemical bonds. (2) \u003cstrong\u003ePhoto-Excitation\u003c\/strong\u003e: Integrated LED or fiber-optic light sources (ranging from UV to Visible Light) provide the photons necessary to excite electrons from the valence band to the conduction band of your photocatalyst (e.g., TiO2, g-C3N4). (3) \u003cstrong\u003eSynergy\u003c\/strong\u003e: The milling prevents the \"shielding effect\" where surface-reacted layers block light from reaching the bulk material. Constant tumbling ensures 100% of the material is exposed to the light source.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMPLIPBM (EFM-P-LIPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding under light illumination\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e900 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLight Source\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe LED light sources with various wavelengths, such as blue, green, yellow, infrared, UV, and white, are available. Please specific the light source types and intensity. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMPLIPBM_02_100x100.png?v=1776192430\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Tempered glass, \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling Balls: ZrO2 and agate can be supplied.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMPLIPBM_03_100x100.png?v=1776192711\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL570 * W570 * H420 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~92 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/10.1021\/acsami.0c19945\"\u003eH. Li, et al., Highly Selective Photocatalytic CO2 Reduction to CH4 by Ball-Milled Cubic Silicon Carbide Nanoparticles under Visible-Light Irradiation, ACS Appl. Mater. Interfaces 2021, 13, 4, 5073–5078\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S1385894725010332\"\u003eR. Ma, et al., Enhanced photocatalytic hydrogen evolution via ball-milled PtO2\/TiO2 \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S1385894725010332\"\u003eheterojunction photocatalyst: An alternative approach for efficient energy production, Chem. Engineering J., 2023, 34, 104004\u003c\/a\u003e. \u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539269828838,"sku":"EFMPLIPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMPLIPBM_main.png?v=1776192430"},{"product_id":"efmcpbm","title":"ECS-FM Cryogenic Planetary Ball Mill (-20°C, 900 rpm, 4*500 mL), EFMCPBM","description":"\u003cp\u003eA Cryogenic Planetary Ball Mill (also known as a Cryo-Mill) is a specialized tool used to process materials that are either heat-sensitive, prone to oxidation, or too \"rubbery\" to grind at room temperature.\u003c\/p\u003e\n\u003cp\u003eIn a high-speed planetary mill, the friction between the balls and the jar can easily push internal temperatures above 100°C. For certain battery components, this is destructive: (1) \u003cstrong\u003ePolymer Electrolytes \u0026amp; Binders\u003c\/strong\u003e: Materials like PEO or specialized ionomers become \"gummy\" when heated. At cryogenic temperatures (below -100°C), they reach their \"glass transition temperature\" (Tg) and become brittle, allowing them to be pulverized into fine powders forDry Battery Electrode (DBE) process. (2) \u003cstrong\u003ePreventing Thermal Degradation\u003c\/strong\u003e: High-energy milling can cause \"phase transitions\" in active materials. Cryo-milling preserves the original crystalline structure of sensitive cathodes or Solid Oxide precursors. (3) \u003cstrong\u003eControlling Reactivity\u003c\/strong\u003e: For high-surface-area materials like nano-silicon, the cold environment slows down oxidation during the milling process.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMCPBM (EFM-CPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or AC220V±10%, single phase, 50\/60Hz, 2000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e900 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCryogenic Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe minimum low temperature is down to -20°C\u003c\/li\u003e\n\u003cli\u003eRefrigerating Capacity: 1800 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e             \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL600 * W670 * H880 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~128 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsaem.0c02209\"\u003eQ. Yan, et al., Cryogenic Milling Method to Fabricate Nanostructured Anodes, ACS Appl. Energy Mater. 2020, 3, 11, 11285–11292\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2213343721009945\"\u003eJ. Liu, et al., Efficient liberation of electrode materials in spent lithium-ion batteries using a cryogenic ball mill, Journal of Environmental Chemical Engineering, 2021, 9, 106017\u003c\/a\u003e. \u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539306430694,"sku":"EFMCPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMCPBM_main.png?v=1776194074"},{"product_id":"efmwscpbm","title":"ECS-FM Water-Spray Cooling Planetary Ball Mill (900 rpm, 4*500 mL), EFMWSCPBM","description":"\u003cp\u003eIn high-energy milling, especially at speeds reaching 1100–2200 RPM, the friction between the grinding media and the jar walls converts nearly all mechanical energy into heat. A Water-Spray Cooling Planetary Ball Mill is a specialized design that uses an atomized water mist or direct spray within the grinding chamber to manage these extreme thermal loads.\u003c\/p\u003e\n\u003cp\u003eUnlike \"jacketed jars\" (which require complex rotary unions for water flow), the spray cooling system treats the entire grinding chamber as a heat exchanger. (1) \u003cstrong\u003eAtomization\u003c\/strong\u003e: Nozzles located inside the mill's lid or side walls spray a fine mist of chilled water directly onto the rotating jars. (2) \u003cstrong\u003eEvaporative Cooling\u003c\/strong\u003e: As the mist hits the hot surface of the Zirconia or Stainless Steel jars, it absorbs heat and evaporates, rapidly lowering the surface temperature. (3) \u003cstrong\u003eDrainage \u0026amp; Recirculation\u003c\/strong\u003e: The water is collected at the bottom of the chamber, filtered, and sent back to your small industrial water chiller to be recooled.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMWSCPBM (EFM-WSCPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or AC220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e900 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eWater Spray Cooling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThere is a water spray nozzle installed on the \"wall\".\u003c\/li\u003e\n\u003cli\u003eSpray water will quickly take away the generated heats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMWSCPBM_02_100x100.png?v=1776195898\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\"\u003e\u003c\/p\u003e\n\u003cp\u003e             \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL600 * W540 * H880 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~118 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsaem.0c02209\"\u003eQ. Yan, et al., Cryogenic Milling Method to Fabricate Nanostructured Anodes, ACS Appl. Energy Mater. 2020, 3, 11, 11285–11292\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2213343721009945\"\u003eJ. Liu, et al., Efficient liberation of electrode materials in spent lithium-ion batteries using a cryogenic ball mill, Journal of Environmental Chemical Engineering, 2021, 9, 106017\u003c\/a\u003e. \u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539335692518,"sku":"EFMWSCPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMWSCPBM_main.png?v=1776195898"},{"product_id":"efel3dhepbm","title":"ECS-FEL Three-Dimensional (3D) High-Energy Planetary Ball Mill (650 rpm, 4 × 3L), EFEL3DHEPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFEL3DHEPBM (EFEL-3DHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 650 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 3-10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 3L\/each (2 or 4 for operation balance). The maximum processing capacity is 12 L. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, Zirconia, Tungsten Carbide (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efelamj3000?variant=47539455262950\"\u003eEFELAMJ3000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-SS304_100x100.png?v=1776201842\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-Nylon_100x100.png?v=1776201842\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-ZrO2_100x100.png?v=1776201842\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-WC_100x100.png?v=1776201842\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1120 * W685 * H780 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~282 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539377799398,"sku":"EFEL3DHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFEL3DHEPBM_main.png?v=1776210346"},{"product_id":"efelamj3000","title":"3 L Milling Jars for High-Energy Planetary Ball Mill, EFELAMJ3000","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFELAMJ3000 (EFEL-A-MJ3000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eJar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 L\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eJar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Milling Jar \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(3) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Tungsten Carbide (WC) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNormally The milling ball material is the same with that of the milling jar. For the nylon milling jar, the milling ball is ZrO2. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are for mini planetary ball mill EFEL3DHEPBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Milling Jar","offer_id":47539455262950,"sku":"EFELAMJ3000SS304","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Nylon Milling Jar","offer_id":47539455295718,"sku":"EFELAMJ3000N","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Milling Jar","offer_id":47539455361254,"sku":"EFELAMJ3000ZrO2","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Milling Jar","offer_id":47539455394022,"sku":"EFELAMJ3000WC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-SS304.png?v=1776201842"},{"product_id":"efssjhevbm","title":"ECS-FS Single Jar High-Energy Vibratory Ball Mill (1700 rpm, 80 mL), EFSSJHEVBM","description":"\u003cp\u003eA High-Energy Vibratory Ball Mill (also known as a Shaker Mill or Mixer Mill) operates on a fundamentally different kinetic principle than planetary mills. Instead of using centrifugal force, the grinding jar undergoes high-frequency, small-amplitude oscillations—typically in a \"figure-eight\" or linear path.\u003c\/p\u003e\n\u003cp\u003eIn a vibratory mill, the grinding media (balls) and the material are subjected to intense accelerations caused by the high-frequency vibration of the jar (usually 15 to 30 Hz or 900 to 1800 cycles\/min). (1) \u003cstrong\u003eImpact Dominance\u003c\/strong\u003e: Unlike the rolling and shearing motion of a planetary mill, the vibratory mill is dominated by frontal impacts. The balls strike the end-caps of the jar with immense force. (2) \u003cstrong\u003eKinetic Energy\u003c\/strong\u003e: The energy transferred is proportional to the frequency and the mass of the grinding balls. This makes it exceptionally effective at breaking down the crystalline structure of brittle materials.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSSJHEVBM (EFS-SJHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 250 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in three-dimension for the milling jar\u003c\/li\u003e\n\u003cli\u003eMilling jar speed: Max. 1700 rpm (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 80 mL (single jar). The maximum processing capacity is 80 mL. \u003c\/li\u003e\n\u003cli\u003eMinimum processing sample amount: 1 g\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmmj?variant=47539880624358\"\u003eEFSAVBMMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ80-SS304_100x100.png?v=1776233252\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ50-ZrO2_100x100.png?v=1776233166\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ50-WC_100x100.png?v=1776233166\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmvmj?variant=47539971981542\"\u003eEFSAVBMVMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ80-SS304_100x100.png?v=1776234172\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ50-ZrO2_100x100.png?v=1776234172\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ50-WC_100x100.png?v=1776234173\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 1 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL430 * W318 * H268 mm (Ar-filled Glovebox Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539835732198,"sku":"EFSSJHEVBM","price":4499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSSJHEVBM_main.png?v=1776235883"},{"product_id":"efsavbmmj","title":"Milling Jars (50 or 80 mL) for Vibratory Ball Mill, EFSAVBMMJ","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSAVBMMJ50 (EFS-A-VBM-MJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50 or 80 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Zirconia (ZrO2) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(3) Tungsten Carbide (WC) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The milling ball material is the same with that of the milling jar. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for small vibratory ball mill EFSSJHEVBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"50 mL Stainless Steel (SS304) Milling Jar","offer_id":47539880624358,"sku":"EFSAVBMMJ50SS304","price":279.0,"currency_code":"USD","in_stock":true},{"title":"80 mL Stainless Steel (SS304) Milling Jar","offer_id":47539880657126,"sku":"EFSAVBMMJ80SS304","price":299.0,"currency_code":"USD","in_stock":true},{"title":"50 mL Zirconia (ZrO2) Milling Jar","offer_id":47539880722662,"sku":"EFSAVPMMJ50ZrO2","price":999.0,"currency_code":"USD","in_stock":true},{"title":"50 mL Tungsten Carbide (WC) Milling Jar","offer_id":47539880755430,"sku":"EFSAVBMMJ50WC","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ80-SS304.png?v=1776267989"},{"product_id":"efsavbmvmj","title":"Vacuum Milling Jars (50 or 80 mL) for Vibratory Ball Mill, EFSAVBMVMJ","description":"\u003cp\u003eA Vacuum Milling Jar is a specialized version of the standard grinding jar, designed to maintain a hermetically sealed environment. It allows to process materials that are highly sensitive to oxygen and moisture without the need to house the entire ball mill inside a glovebox.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSAVBMVMJ (EFS-A-VBM-VMJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50 or 80 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Zirconia (ZrO2) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(3) Tungsten Carbide (WC) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The milling ball material is the same with that of the milling jar. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for small vibratory ball mill EFSSJHEVBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"50 mL Stainless Steel (SS304) Vacuum Milling Jar","offer_id":47539971981542,"sku":"EFSAVBMMJ50SS304","price":349.0,"currency_code":"USD","in_stock":true},{"title":"80 mL Stainless Steel (SS304) Vacuum Milling Jar","offer_id":47539972014310,"sku":"EFSAVBMVMJ80SS304","price":349.0,"currency_code":"USD","in_stock":true},{"title":"50 mL Zirconia (ZrO2) Vacuum Milling Jar","offer_id":47539972047078,"sku":"EFSAVBMVMJ50ZrO2","price":999.0,"currency_code":"USD","in_stock":true},{"title":"50 mL Tungsten Carbide (WC) Vacuum Milling Jar","offer_id":47539972079846,"sku":"EFSAVBMVMJ50WC","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMVMJ50-SS304.png?v=1776268060"},{"product_id":"efsdjhevbm","title":"ECS-FS Dual Jars High-Energy Vibratory Ball Mill (1700 rpm, 2*80 mL), EFSDJHEVBM","description":"\u003cp\u003eA High-Energy Vibratory Ball Mill (also known as a Shaker Mill or Mixer Mill) operates on a fundamentally different kinetic principle than planetary mills. Instead of using centrifugal force, the grinding jar undergoes high-frequency, small-amplitude oscillations—typically in a \"figure-eight\" or linear path.\u003c\/p\u003e\n\u003cp\u003eIn a vibratory mill, the grinding media (balls) and the material are subjected to intense accelerations caused by the high-frequency vibration of the jar (usually 15 to 30 Hz or 900 to 1800 cycles\/min). (1) \u003cstrong\u003eImpact Dominance\u003c\/strong\u003e: Unlike the rolling and shearing motion of a planetary mill, the vibratory mill is dominated by frontal impacts. The balls strike the end-caps of the jar with immense force. (2) \u003cstrong\u003eKinetic Energy\u003c\/strong\u003e: The energy transferred is proportional to the frequency and the mass of the grinding balls. This makes it exceptionally effective at breaking down the crystalline structure of brittle materials.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSDJHEVBM (EFS-DJHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in three-dimension for the milling jar\u003c\/li\u003e\n\u003cli\u003eMilling jar speed: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1700 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 80 mL\/each (dual jars). The maximum processing capacity is 160 mL. \u003c\/li\u003e\n\u003cli\u003eMinimum processing sample amount in each jar: 1 g\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmmj?variant=47539880624358\"\u003eEFSAVBMMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ80-SS304_100x100.png?v=1776233252\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ50-ZrO2_100x100.png?v=1776233166\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ50-WC_100x100.png?v=1776233166\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmvmj?variant=47539971981542\"\u003eEFSAVBMVMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ80-SS304_100x100.png?v=1776234172\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ50-ZrO2_100x100.png?v=1776234172\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ50-WC_100x100.png?v=1776234173\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 1 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL620 * W320 * H268 mm (Ar-filled Glovebox Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~68 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47541849882854,"sku":"EFSDJHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSDJHEVBM_main.png?v=1776266104"},{"product_id":"efsmsjvbm","title":"ECS-FS Mini Single Jar Vibratory Ball Mill (3000 CPM, 15 mL) (Ar-Filled Glovebox-Compatible), EFSMSJVBM","description":"\u003cp\u003eA mini single-jar vibratory ball mill is a specialized piece of laboratory equipment designed for high-energy grinding, mixing, and mechanochemical alloying on a small scale. Unlike planetary ball mills that use centrifugal force, vibratory mills use high-frequency oscillations to impact the grinding media against the material.\u003c\/p\u003e\n\u003cp\u003eThe \"mini\" designation typically refers to a tabletop unit designed for small batch sizes, often ranging from 5 ml to 50 ml. (1) \u003cstrong\u003eVibratory Motion\u003c\/strong\u003e: The jar is mounted on a high-speed motor shaft that generates a circular or elliptical vibration. This causes the grinding balls to collide with the sample and the jar walls at high frequencies (up to 3,000 RPM or 50 Hz). (2) \u003cstrong\u003eHigh Energy\u003c\/strong\u003e: The kinetic energy transferred is intense, making these mills ideal for producing nano-sized powders and achieving uniform homogenization in a fraction of the time required by traditional roller mills. (3) \u003cstrong\u003eSingle Jar Setup\u003c\/strong\u003e: This configuration is streamlined for R\u0026amp;D where cross-contamination must be avoided and only one sample needs processing at a time.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSMSJVBM (EFS-MSJVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 30 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in three-dimension for the milling jar\u003c\/li\u003e\n\u003cli\u003eMilling jar frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 3000 cycles\/min\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotion range: 12 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 15 mL (single jar). The maximum processing capacity is 15 mL. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmmj15?variant=47541995733222\"\u003eEFSAVBMMJ15\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-SS304_100x100.png?v=1776268980\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-PTFE_100x100.png?v=1776268979\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-ZrO2_100x100.png?v=1776268979\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-WC_100x100.png?v=1776268979\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 6 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL150 * W210 * H220 mm (Ar-filled Glovebox Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47541949038822,"sku":"EFSMSJVBM","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSMSJVBM_main.png?v=1776269586"},{"product_id":"efsavbmmj15","title":"Milling Jars (15 mL) for Vibratory Ball Mill, EFSAVBMMJ15","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSAVBMMJ15 (EFS-A-VBM-MJ15)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e15 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) PTFE Milling Jar\u003c\/li\u003e\n\u003cli\u003e(3) Zirconia (ZrO2) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Tungsten Carbide (WC) Vacuum Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The milling ball material is the same with that of the milling jar. For PTFE jar, the milling ball is ZrO2. \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for small vibratory ball mill EFSMSJVBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Milling Jar","offer_id":47541995733222,"sku":"EFSAVBMMJ15SS304","price":399.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Milling Jar","offer_id":47542020341990,"sku":"EFSAVBMMJ15PTFE","price":399.0,"currency_code":"USD","in_stock":false},{"title":"Zirconia (ZrO2) Milling Jar","offer_id":47541995798758,"sku":"EFSAVBMMJ15ZrO2","price":1299.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Milling Jar","offer_id":47541995831526,"sku":"EFSAVBMMJ15WC","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-SS304.png?v=1776268980"},{"product_id":"efsnohevbm","title":"ECS-FS Nano High-Energy Vibratory Ball Mill (1800 rpm, 2*125 mL), EFSNOHEVBM","description":"\u003cp\u003eTo achieve true \u003cb data-path-to-node=\"0\" data-index-in-node=\"16\"\u003enanosize-output\u003c\/b\u003e, a high-energy vibratory ball mill must operate at significantly higher frequencies than standard mixers. For research in advanced battery electrodes or solid electrolytes, these mills are used to reduce particles from micrometer scales down to the \u003cb data-path-to-node=\"0\" data-index-in-node=\"281\"\u003e10–100 nm\u003c\/b\u003e range through intensive impact and friction.\u003c\/p\u003e\n\u003cp\u003eIn a high-energy vibratory mill, the jar undergoes high-frequency, small-amplitude oscillations. This creates a \"chaotic\" movement of the grinding media, where the balls strike each other and the jar walls with high kinetic energy (Ek = 1\/2mv^2). (1) \u003cstrong\u003eImpact Force\u003c\/strong\u003e: Breaks down brittle crystalline structures. (2) \u003cstrong\u003eShear Force\u003c\/strong\u003e: Essential for exfoliating layered materials (like graphite) and refining particle size. (3) \u003cstrong\u003eMechanochemical Activation\u003c\/strong\u003e: The energy is often high enough to trigger chemical reactions or phase changes at the surface of the particles.\u003c\/p\u003e\n\u003cp\u003eTo reach the nanometer scale, the system must be optimized far beyond standard \"mixing\" protocols:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrinding Media (Balls):\u003c\/strong\u003e It is highly recommended to use micro-media (0.1 mm to 1.0 mm) for the final stages. Smaller balls provide a much higher frequency of contact points per volume. Normally Yttrium-stabilized Zirconia (YSZ) is the gold standard due to its high density (6.0 g\/cm3) and extreme wear resistance, preventing sample contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency and Amplitude\u003c\/strong\u003e: High-energy units typically operate at 30–60 Hz (1,800–3,600 RPM). Amplitude: Usually set between 1–10 mm. For nanosizing, a smaller amplitude at a higher frequency is often more effective at generating the necessary shear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlurry vs. Dry Milling\u003c\/strong\u003e: Wet milling is highly recommended for nanosizing. Using a solvent (ethanol, NMP, or DI water) prevents particle agglomeration (where small particles stick back together due to Van der Waals forces).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSNOHEVBM (EFS-NOHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in horizontal arc shape back and forth\u003c\/li\u003e\n\u003cli\u003eMilling jar vibration frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1800 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time: 10-60 s\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 125 mL\/each (dual jar). The maximum processing capacity is 250 mL. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-30 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsanohevbmmj125?variant=47542060876006\"\u003eEFSANOHEVBMMJ125\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-WC_100x100.png?v=1776271879\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-PTFE_100x100.png?v=1776271928\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-ZrO2_100x100.png?v=1776271928\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-SS304_100x100.png?v=1776271879\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsanohevbmvmj125?variant=47542083059942\"\u003eEFSANOHEVBMVMJ125\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMVMJ125-ZrO2_100x100.png?v=1776272498\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMVMJ125-PTFE_100x100.png?v=1776272498\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMVMJ125-WC_100x100.png?v=1776272498\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e~100 nm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLow Temperature Version (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIf the low-temperature (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e-50°C\u003c\/span\u003e) vibratory ball mill is required, the integration with a liquid nitrogen or cooling water is available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOHEVBM_04_100x100.png?v=1776273661\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Version (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIf the milling jars need to be operated at the high temperature (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 200°C, 1200 W\u003c\/span\u003e), the heating version can be supplied upon request.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOHEVBM_05_100x100.png?v=1776273805\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOHEVBM_06_100x100.png?v=1776273804\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL680 * W540 * H320 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~95 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47542047146214,"sku":"EFSNOHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOHEVBM_main.png?v=1776273446"},{"product_id":"efsanohevbmmj125","title":"Milling Jars (125 mL) for Nano High-Energy Vibratory Ball Mill, EFSANOHEVBMMJ125","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSANOHEVBMMJ125 (EFS-A-NOHEVBM-MJ125)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e125 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) PTFE Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(3) Tungsten Carbide (WC) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The milling ball material is the same with that of the milling jar. The PTFE mill jar is equipped with ZrO2 milling balls\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for small vibratory ball mill EFSNOHEVBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Milling Jar","offer_id":47542060876006,"sku":"EFSANOHEVBMMJ125SS304","price":749.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Milling Jar","offer_id":47542060908774,"sku":"EFSANOHEVBMMJ125PTFE","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Milling Jar","offer_id":47542060941542,"sku":"EFSANOHEVBMMJ125ZrO2","price":2399.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Milling Jar","offer_id":47542060974310,"sku":"EFSANOHEVBMMJ125WC","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-SS304.png?v=1776271879"},{"product_id":"efsanohevbmvmj125","title":"Vacuum Milling Jars (125 mL) for Nano High-Energy Vibratory Ball Mill, EFSANOHEVBMVMJ125","description":"\u003cp\u003eA Vacuum Milling Jar is a specialized version of the standard grinding jar, designed to maintain a hermetically sealed environment. It allows to process materials that are highly sensitive to oxygen and moisture without the need to house the entire ball mill inside a glovebox.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSANOHEVBMVMJ125 (EFS-A-NOHEVBM-VMJ125)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Milling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e125 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eVacuum Milling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) PTFE Milling Jar\u003c\/li\u003e\n\u003cli\u003e(2) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(3) Tungsten Carbide (WC) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The milling ball material is the same with that of the milling jar. The PTFE mill jar is equipped with ZrO2 milling balls\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for small vibratory ball mill EFSNOHEVBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"PTFE Vacuum Milling Jar","offer_id":47542083059942,"sku":"EFSANOHEVBMVMJ125PTFE","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Vacuum Milling Jar","offer_id":47542083092710,"sku":"EFSANOHEVBMVMJ125ZrO2","price":2799.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Vacuum Milling Jar","offer_id":47542083125478,"sku":"EFSANOHEVBMVMJ125WC","price":2799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMVMJ125-PTFE.png?v=1776272498"},{"product_id":"efshtnohevbm","title":"ECS-FS High-Throughput Nano High-Energy Vibratory Ball Mill (1800 rpm, 12*10 mL), EFSHTNOHEVBM","description":"\u003cp\u003eTo achieve true \u003cb data-index-in-node=\"16\" data-path-to-node=\"0\"\u003enanosize-output\u003c\/b\u003e, a high-energy vibratory ball mill must operate at significantly higher frequencies than standard mixers. For research in advanced battery electrodes or solid electrolytes, these mills are used to reduce particles from micrometer scales down to the \u003cb data-index-in-node=\"281\" data-path-to-node=\"0\"\u003e10–100 nm\u003c\/b\u003e range through intensive impact and friction.\u003c\/p\u003e\n\u003cp\u003eIn a high-energy vibratory mill, the jar undergoes high-frequency, small-amplitude oscillations. This creates a \"chaotic\" movement of the grinding media, where the balls strike each other and the jar walls with high kinetic energy (Ek = 1\/2mv^2). (1) \u003cstrong\u003eImpact Force\u003c\/strong\u003e: Breaks down brittle crystalline structures. (2) \u003cstrong\u003eShear Force\u003c\/strong\u003e: Essential for exfoliating layered materials (like graphite) and refining particle size. (3) \u003cstrong\u003eMechanochemical Activation\u003c\/strong\u003e: The energy is often high enough to trigger chemical reactions or phase changes at the surface of the particles.\u003c\/p\u003e\n\u003cp\u003eTo reach the nanometer scale, the system must be optimized far beyond standard \"mixing\" protocols:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrinding Media (Balls):\u003c\/strong\u003e It is highly recommended to use micro-media (0.1 mm to 1.0 mm) for the final stages. Smaller balls provide a much higher frequency of contact points per volume. Normally Yttrium-stabilized Zirconia (YSZ) is the gold standard due to its high density (6.0 g\/cm3) and extreme wear resistance, preventing sample contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency and Amplitude\u003c\/strong\u003e: High-energy units typically operate at 30–60 Hz (1,800–3,600 RPM). Amplitude: Usually set between 1–10 mm. For nanosizing, a smaller amplitude at a higher frequency is often more effective at generating the necessary shear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlurry vs. Dry Milling\u003c\/strong\u003e: Wet milling is highly recommended for nanosizing. Using a solvent (ethanol, NMP, or DI water) prevents particle agglomeration (where small particles stick back together due to Van der Waals forces).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSHTNOHEVBM (EFS-HTNOHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in horizontal arc shape back and forth\u003c\/li\u003e\n\u003cli\u003eMilling jar vibration frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1800 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time: 10-60 s\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 10 mL\/each (maximum jar numbers are 12). The maximum processing capacity is 120 mL. The smaller jars, such as 2 mL and 5 mL, are also available upon request.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-30 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsahtnohevbmmj10?variant=47542666133734\"\u003eEFSAHTNOHEVBMMJ10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-SS304_100x100.png?v=1776280731\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-Nylon_100x100.png?v=1776280778\" alt=\"\" style=\"float: none;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-ZrO2_100x100.png?v=1776280778\" alt=\"\" style=\"float: none;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-WC_100x100.png?v=1776280731\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e~100 nm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL680 * W540 * H320 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~98 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884212003318\"\u003eT.P. Yadav, et al., Synthesis of nanocrystalline cerium oxide by high energy ball milling, Ceramics International, 2012, 38, 5783-5789\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.3367\/UFNe.2019.06.038581\/meta\"\u003eA I Gusev, et al., High-energy ball milling of nonstoichiometric compounds, Phys.-Usp., 2020, 63, 342\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47542583787750,"sku":"EFSHTNOHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSHTNOHEVBM_main.png?v=1776281517"},{"product_id":"efsahtnohevbmmj10","title":"Milling Jars (10 mL) for High-Throughput Nano High-Energy Vibratory Ball Mill, EFSAHTNOHEVBMMJ10","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSAHTNOHEVBMMJ10 (EFS-A-HTNOHEVBM-MJ10)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Milling Jar\u003c\/li\u003e\n\u003cli\u003e(3) PTFE Milling Jar\u003c\/li\u003e\n\u003cli\u003e(4) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) Tungsten Carbide (WC) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The milling ball material is the same with that of the milling jar. The Nylon and PTFE mill jars are equipped with ZrO2 milling balls\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for small vibratory ball mill EFSHTNOHEVBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884212003318\"\u003eT.P. Yadav, et al., Synthesis of nanocrystalline cerium oxide by high energy ball milling, Ceramics International, 2012, 38, 5783-5789\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.3367\/UFNe.2019.06.038581\/meta\"\u003eA I Gusev, et al., High-energy ball milling of nonstoichiometric compounds, Phys.-Usp., 2020, 63, 342\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Stainless Steel (SS304) Milling Jar","offer_id":47542666133734,"sku":"EFSAHTNOHEVBMMJ10SS304","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Nylon Milling Jar","offer_id":47542685630694,"sku":"EFSAHTNOHEVBMMJ10N","price":199.0,"currency_code":"USD","in_stock":true},{"title":"PTFE Milling Jar","offer_id":47542666166502,"sku":"EFSAHTNOHEVBMMJ10PTFE","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Zirconia (ZrO2) Milling Jar","offer_id":47542666199270,"sku":"EFSAHTNOHEVBMMJ10ZrO2","price":929.0,"currency_code":"USD","in_stock":true},{"title":"Tungsten Carbide (WC) Milling Jar","offer_id":47542666232038,"sku":"EFSAHTNOHEVBMMJ10WC","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-SS304.png?v=1776280731"},{"product_id":"efschevbm","title":"ECS-FS Cryogenic High-Energy Vibratory Ball Mill (1800 rpm, 2*50 mL), EFSCHEVBM","description":"\u003cp\u003eFor reaching the nanometer scale with thermally sensitive or ductile materials—such as sulfur-based composites (SPAN), polymers, or biological samples—a Cryogenic High-Energy Vibratory Ball Mill is the definitive tool. Cryomilling prevents the \"cold-welding\" and thermal degradation that typically occur during high-energy impact, keeping the sample brittle and facilitating efficient fracture into the 10–100 nm range.\u003c\/p\u003e\n\u003cp\u003eIn standard milling, the kinetic energy of the grinding media is converted into heat upon impact. For materials with a low glass transition temperature (Tg), this causes the particles to soften, deform, or agglomerate rather than shatter. (1) \u003cstrong\u003eEmbrittlement\u003c\/strong\u003e: Liquid nitrogen (LN2) cools the sample to approximately -196°C. At these temperatures, even ductile polymers and soft metals become brittle, allowing for rapid size reduction. (2) \u003cstrong\u003eStructural Preservation\u003c\/strong\u003e: For electrochemical materials like SPAN (Sulfurized Polyacrylonitrile), maintaining the chemical bond integrity is crucial. Cryomilling prevents the localized \"hot spots\" that could trigger premature desulfurization. (3) \u003cstrong\u003ePrevention of Agglomeration\u003c\/strong\u003e: By suppressing the surface energy increases caused by heat, particles are less likely to fuse back together during the process.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 627.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSCHEVBM (EFS-CHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 150 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 165.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 165.2px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 165.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in horizontal arc shape back and forth\u003c\/li\u003e\n\u003cli\u003eMilling jar vibration frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1800 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time: 10-60 s\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLiquid N2 Tank: 30 L\u003c\/li\u003e\n\u003cli\u003eLowest temperature detection: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e-200°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 137.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 137.2px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 137.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 30 or 50 mL\/each (dual jars). The maximum processing capacity is 100 mL. Smaller jar with 2 mL, 5 mL are also available upon request.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-25 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Cryogenic Milling Jars: \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsachevbmmj?variant=47542761226470\"\u003eEFSACHEVBMMJ \u003c\/a\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSACNOHEVBMMJ50-Nylon_100x100.png?v=1776300887\" style=\"float: none;\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 8 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e~5 um\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL470 * W360 * H250 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~48 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47542754607334,"sku":"EFSCHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSCHEVBM_main.png?v=1776302460"},{"product_id":"efsachevbmmj","title":"Milling Jars (30-50 mL) for Cryogenic High-Energy Vibratory Ball Mill, EFSACHEVBMMJ","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSACHEVBMMJ (EFS-A-CHEVBM-MJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e30 or 50 mL\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Milling Jar\u003c\/li\u003e\n\u003cli\u003e(3) PTFE Milling Jar\u003c\/li\u003e\n\u003cli\u003e(4) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(5) Tungsten Carbide (WC) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The milling ball material is the same with that of the milling jar. The Nylon and PTFE mill jars are equipped with ZrO2 milling balls\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for small vibratory ball mill EFSCHEVBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884212003318\"\u003eT.P. Yadav, et al., Synthesis of nanocrystalline cerium oxide by high energy ball milling, Ceramics International, 2012, 38, 5783-5789\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.3367\/UFNe.2019.06.038581\/meta\"\u003eA I Gusev, et al., High-energy ball milling of nonstoichiometric compounds, Phys.-Usp., 2020, 63, 342\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"50 mL Stainless Steel (SS304) Milling Jar","offer_id":47542761226470,"sku":"EFSACHEVBMMJ50SS304","price":349.0,"currency_code":"USD","in_stock":true},{"title":"50 mL Nylon Milling Jar","offer_id":47543235543270,"sku":"EFSACHEVBMMJ50N","price":349.0,"currency_code":"USD","in_stock":true},{"title":"50 mL PTFE Milling Jar","offer_id":47543235576038,"sku":"EFSACHEVBMMJ50PTFE","price":349.0,"currency_code":"USD","in_stock":true},{"title":"30 mL Zirconia (ZrO2) Milling Jar","offer_id":47542761324774,"sku":"EFSACHEVBMMJ30ZrO2","price":1099.0,"currency_code":"USD","in_stock":true},{"title":"30 mL Tungsten Carbide (WC) Milling Jar","offer_id":47542761357542,"sku":"EFSACHEVBMMJ30WC","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSACHEVBMMJ50-SS304.png?v=1776301773"},{"product_id":"efsnouhevbm","title":"ECS-FS Nano Ultra-High-Energy Vibratory Ball Mill (2000 rpm, 2*125 mL), EFSNOUHEVBM","description":"\u003cp\u003eTo achieve true \u003cb data-index-in-node=\"16\" data-path-to-node=\"0\"\u003enanosize-output\u003c\/b\u003e, a high-energy vibratory ball mill must operate at significantly higher frequencies than standard mixers. For research in advanced battery electrodes or solid electrolytes, these mills are used to reduce particles from micrometer scales down to the \u003cb data-index-in-node=\"281\" data-path-to-node=\"0\"\u003e10–100 nm\u003c\/b\u003e range through intensive impact and friction.\u003c\/p\u003e\n\u003cp\u003eIn a high-energy vibratory mill, the jar undergoes high-frequency, small-amplitude oscillations. This creates a \"chaotic\" movement of the grinding media, where the balls strike each other and the jar walls with high kinetic energy (Ek = 1\/2mv^2). (1) \u003cstrong\u003eImpact Force\u003c\/strong\u003e: Breaks down brittle crystalline structures. (2) \u003cstrong\u003eShear Force\u003c\/strong\u003e: Essential for exfoliating layered materials (like graphite) and refining particle size. (3) \u003cstrong\u003eMechanochemical Activation\u003c\/strong\u003e: The energy is often high enough to trigger chemical reactions or phase changes at the surface of the particles.\u003c\/p\u003e\n\u003cp\u003eTo reach the nanometer scale, the system must be optimized far beyond standard \"mixing\" protocols:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrinding Media (Balls):\u003c\/strong\u003e It is highly recommended to use micro-media (0.1 mm to 1.0 mm) for the final stages. Smaller balls provide a much higher frequency of contact points per volume. Normally Yttrium-stabilized Zirconia (YSZ) is the gold standard due to its high density (6.0 g\/cm3) and extreme wear resistance, preventing sample contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency and Amplitude\u003c\/strong\u003e: High-energy units typically operate at 30–60 Hz (1,800–3,600 RPM). Amplitude: Usually set between 1–10 mm. For nanosizing, a smaller amplitude at a higher frequency is often more effective at generating the necessary shear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlurry vs. Dry Milling\u003c\/strong\u003e: Wet milling is highly recommended for nanosizing. Using a solvent (ethanol, NMP, or DI water) prevents particle agglomeration (where small particles stick back together due to Van der Waals forces).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ctable style=\"height: 679.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSNOUHEVBM (EFS-NOUHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in horizontal arc shape back and forth\u003c\/li\u003e\n\u003cli\u003eMilling jar vibration frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 2000 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time can be set in 99h: 99m: 99s. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 285.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 285.6px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 285.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 125 mL\/each (dual jar). The maximum processing capacity is 250 mL. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-30 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsanohevbmmj125?variant=47542060876006\"\u003eEFSANOHEVBMMJ125\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-WC_100x100.png?v=1776271879\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-PTFE_100x100.png?v=1776271928\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-ZrO2_100x100.png?v=1776271928\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-SS304_100x100.png?v=1776271879\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 5 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u0026lt;80 nm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 10px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 10px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL520 * W520 * H380 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~128 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47543465115878,"sku":"EFSNOUHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOUHEVBM_main.png?v=1776314477"},{"product_id":"eflsjrbm","title":"ECS-FL Single Jar Rolling Ball Mill (900 rpm, 3 L), EFLSJRBM","description":"\u003cp\u003eA single-jar rolling ball mill (often called a drum mill or jar mill) operates on a completely different principle than the high-energy vibratory or planetary mills we've discussed. It is a low-energy, long-duration milling solution. Instead of high-frequency vibration, it relies on the gravity-driven cascading motion of grinding media inside a rotating horizontal jar.\u003c\/p\u003e\n\u003cp\u003eIn a rolling ball mill, the jar is placed on two or more motorized rollers. As the rollers turn, the jar rotates, and the grinding balls are lifted by centrifugal force and friction until they reach a certain height, after which they \"cascade\" or fall back down onto the sample. (1) \u003cstrong\u003eImpact\u003c\/strong\u003e: Occurs at the \"toe\" of the charge where balls fall. (2) \u003cstrong\u003eAttrition\/Shear\u003c\/strong\u003e: Occurs between the sliding balls and the jar wall. (3) \u003cstrong\u003eCritical Speed (nc)\u003c\/strong\u003e: This is the most vital parameter. If the jar rotates too slowly, the balls just slide (no grinding). If it rotates too fast, centrifugal force pins the balls to the wall (no grinding). The ideal operating speed is typically 65% to 80% of the critical speed.\u003c\/p\u003e\n\u003ctable style=\"height: 736.4px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLSJRBM (EFS-SJRBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/mixing with friction\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRubber roller rotation speed: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 900 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe rollers were covered with PU coating. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 305.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 305.2px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 305.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 3L (single jar). The maximum processing capacity is 3 L. The other jar volumes, such as 250 mL, 500 mL, and 1000 mL are also available upon request.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-30 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflarbmlmj?variant=47543491264742\"\u003eEFLARBMLMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ3L-SS304_100x100.png?v=1776316331\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ3L-Nylon_100x100.png?v=1776316331\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ1L-ZrO2_100x100.png?v=1776316331\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ1L-WC_100x100.png?v=1776316331\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 5 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1-20 um\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL410 * W470 * H310 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col class=\"cus-ref-zone__list\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ceat.201600508\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eM. V. C. Machado, et al., Experimental and Numerical Study of Grinding Media Flow in a Ball Mill, Chemical Engineering Technology, 2017, 40, 1835-1843\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591021002047\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eD. Li, et al., Numerical study on the effect of drum on the flow behavior of binary-size particles in rotating drums, Powder Technology, 2021, 386,  108-119\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47543539859686,"sku":"EFLSJRBM","price":3399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLSJRBM_main.png?v=1776319125"},{"product_id":"eflarbmlmj","title":"Large Milling Jars (3 L) for Rolling Ball Mill, EFLARBMLMJ","description":"\u003cp\u003eThe choice of milling jar material is a critical variable. For high-precision components for pouch cell fabrication, selecting a material with the correct hardness and chemical resistance is essential to prevent contamination from \"wear debris.\u003c\/p\u003e\n\u003cp\u003eThe options of milling jar materials are shown below:\u003c\/p\u003e\n\u003cp\u003e(1) Zirconia (ZrO2): Zirconia is the most popular choice for lithium-ion battery R\u0026amp;D (NCM, LFP, Graphite).\u003c\/p\u003e\n\u003cp\u003e(2) Alumina (Al2O3): Alumina is often used for the materials science side of your work, particularly for SOFC\/SOEC components.\u003c\/p\u003e\n\u003cp\u003e(3) Stainless Steel (SUS304\/316): SS is a standard and economical option, but cross-contamination is a big risk for battery material milling.\u003c\/p\u003e\n\u003cp\u003e(4) Agate (Natural Quartz): It is featured as \"Zero Metallic Contamination\" since Agate is a natural, non-metallic material preferred for ultra-pure chemical synthesis.\u003c\/p\u003e\n\u003cp\u003e(5) Tungsten Carbide (WC): It is normally used when maximum impact energy is required.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLARBMLMJ (EFL-A-RBM-LMJ)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 L or 3 L\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Jar Material Options\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Stainless Steel (SS304) Milling Jar \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Nylon Milling Jar\u003c\/li\u003e\n\u003cli\u003e(3) Zirconia (ZrO2) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(4) Tungsten Carbide (WC) Milling Jar\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe milling ball material is the same with that of the milling jar. The Nylon mill jar is equipped with ZrO2 milling balls\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe above milling jars are used for small vibratory ball mill EFLSJRBM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S235271021530005X\"\u003eM. V. C. Machado, et al., Experimental and Numerical Study of Grinding Media Flow in a Ball Mill, Chemical Engineering Technology, 2017, 40, 1835-1843\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591021002047\"\u003eD. Li, et al., Numerical study on the effect of drum on the flow behavior of binary-size particles in rotating drums, Powder Technology, 2021, 386,  108-119\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"3 L Stainless Steel (SS304) Milling Jar","offer_id":47543491264742,"sku":"EFLARBMLMJ3LSS304","price":579.0,"currency_code":"USD","in_stock":true},{"title":"3 L Nylon Milling Jar","offer_id":47543491297510,"sku":"EFLARBMLMJ3LN","price":579.0,"currency_code":"USD","in_stock":true},{"title":"1 L Zirconia (ZrO2) Milling Jar","offer_id":47543491330278,"sku":"EFLARBMLMJ1LZrO2","price":2499.0,"currency_code":"USD","in_stock":true},{"title":"1 L Tungsten Carbide (WC) Milling Jar","offer_id":47543491363046,"sku":"EFLARBMLMJ1LWC","price":4299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ3L-SS304.png?v=1776316331"},{"product_id":"efl4jrbm","title":"ECS-FL Four Jars Rolling Ball Mill (900 rpm, 3 L), EFL4JRBM","description":"\u003cp\u003eA four jars rolling ball mill (often called a drum mill or jar mill) operates on a completely different principle than the high-energy vibratory or planetary mills we've discussed. It is a low-energy, long-duration milling solution. Instead of high-frequency vibration, it relies on the gravity-driven cascading motion of grinding media inside a rotating horizontal jar.\u003c\/p\u003e\n\u003cp\u003eIn a rolling ball mill, the jar is placed on two or more motorized rollers. As the rollers turn, the jar rotates, and the grinding balls are lifted by centrifugal force and friction until they reach a certain height, after which they \"cascade\" or fall back down onto the sample. (1) \u003cstrong\u003eImpact\u003c\/strong\u003e: Occurs at the \"toe\" of the charge where balls fall. (2) \u003cstrong\u003eAttrition\/Shear\u003c\/strong\u003e: Occurs between the sliding balls and the jar wall. (3) \u003cstrong\u003eCritical Speed (nc)\u003c\/strong\u003e: This is the most vital parameter. If the jar rotates too slowly, the balls just slide (no grinding). If it rotates too fast, centrifugal force pins the balls to the wall (no grinding). The ideal operating speed is typically 65% to 80% of the critical speed.\u003c\/p\u003e\n\u003ctable style=\"height: 736.4px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFL4JRBM (EFS-4JRBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/mixing with friction\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRubber roller rotation speed: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 900 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe three rollers were covered with PU coating. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 305.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 305.2px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 305.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 3L\/each (four jars). The maximum processing capacity is 12 L. The other jar volumes, such as 250 mL, 500 mL, and 1000 mL are also available upon request.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-30 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflarbmlmj?variant=47543491264742\"\u003eEFLARBMLMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ3L-SS304_100x100.png?v=1776316331\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ3L-Nylon_100x100.png?v=1776316331\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ1L-ZrO2_100x100.png?v=1776316331\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSARBMLMJ1L-WC_100x100.png?v=1776316331\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 5 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1-20 um\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL670 * W660 * H310 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~88 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003col class=\"cus-ref-zone__list\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ceat.201600508\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eM. V. C. Machado, et al., Experimental and Numerical Study of Grinding Media Flow in a Ball Mill, Chemical Engineering Technology, 2017, 40, 1835-1843\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591021002047\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eD. Li, et al., Numerical study on the effect of drum on the flow behavior of binary-size particles in rotating drums, Powder Technology, 2021, 386,  108-119\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47543602118886,"sku":"EFL4JRBM","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFL4JRBM_main.png?v=1776321768"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/EFSMPBM_main.png?v=1776819840","url":"https:\/\/echemsupplies.com\/collections\/mixers-and-mills.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}