{"title":"Molten Salt Synthesis","description":"\u003cp\u003e\u003cstrong\u003eMolten salt synthesis exploits a low-melting ionic flux as both reaction medium and mass-transport accelerator, producing crystalline oxides, sulfides, and intermetallics at temperatures hundreds of degrees below conventional solid-state firing.\u003c\/strong\u003e Because diffusion in a liquid salt is orders of magnitude faster than in packed powder, particle morphology, phase purity, and dopant distribution can be tuned in hours rather than days — which is why the route has become a workhorse for cathode precursors (NCM, LCO, spinel LMO, olivine LFP), garnet electrolytes (LLZO), MAX\/MXene precursors, and high-entropy oxides.\u003c\/p\u003e\n\n\u003cp\u003eThe equipment in this collection supports the full molten-salt workflow inside a controlled atmosphere:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSalt selection and pre-drying.\u003c\/strong\u003e Chloride eutectics (LiCl-KCl, NaCl-KCl), carbonate fluxes (Li2CO3-K2CO3), hydroxide melts (NaOH-KOH), and sulfate or fluoride mixtures each set a different temperature window and oxygen activity. Most are hygroscopic and must be dried and handled under inert gas.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-temperature reaction.\u003c\/strong\u003e Crucible furnaces and tube furnaces sized for sealed alumina, nickel, or graphite crucibles are used to hold the melt at 400-1100 C while the precursor reacts and recrystallizes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGlovebox-compatible electrolysis cells.\u003c\/strong\u003e When the goal is electrowinning a metal (Li, Mg, Al, rare earths) or templating an alloy from the melt, a sealed cell with feedthroughs for working, counter, and reference electrodes is required.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAtmosphere control and gas handling.\u003c\/strong\u003e Argon or dry-air manifolds, off-gas scrubbers for HCl\/HF generated by trace moisture, and load-locks that pass the reaction vessel into a glovebox without breaking inertness.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePost-reaction recovery.\u003c\/strong\u003e Quenching plates, washing stations, and filtration tools used to separate the product from the residual salt before drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are screening a new cathode or solid-electrolyte composition, start with a small crucible furnace plus a chloride or carbonate flux. If you are pulling metals out of the melt electrochemically, you will need a glovebox-compatible electrolysis furnace with sealed feedthroughs. For broader context on adjacent thermal routes, see \u003ca href=\"\/collections\/solid-state-synthesis\"\u003eSolid State Synthesis\u003c\/a\u003e; for the cells used to drive current through a melt, see \u003ca href=\"\/collections\/molten-salt-electrochemistry\"\u003eMolten Salt Electrochemistry\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"ensmmsef","title":"ECS-NS Mini Molten Salt Electrolysis Furnace (Glovebox Compatible), ENSMMSEF","description":"\u003cp\u003eA Mini Molten Salt Electrolysis Furnace is a specialized high-temperature reactor designed for the electrochemical extraction of metals (like Li, Al, or Rare Earths) and the processing of advanced nuclear or solar thermal salts. It is a primary tool for studying the electrowinning of Lithium or the high-temperature behavior of halide\/carbonate salts. The \"Glovebox Compatible\" requirement is critical because most molten salts (especially chlorides and fluorides) are highly hygroscopic and will react with moisture to form corrosive HCl or HF gases.\u003c\/p\u003e\n\u003cp\u003eDesigning a furnace for a glovebox requires balancing high internal temperatures (500-1000 °C) with the need to keep the glovebox atmosphere and its polycarbonate windows cool. (1) \u003cstrong\u003eCold-Wall Design\u003c\/strong\u003e: The furnace features an integrated water-cooling jacket or high-efficiency air-cooling fins. This ensures the outer shell remains at a \"touch-safe\" temperature (\u0026lt;50 °C), preventing damage to the glovebox seals. (2) \u003cstrong\u003eVacuum-Tight Flanges\u003c\/strong\u003e: High-vacuum KF or ISO flanges allow the furnace to be evacuated and backfilled with ultra-high-purity Argon, ensuring the salt remains pristine. (3) \u003cstrong\u003eFeedthroughs\u003c\/strong\u003e: Specialized electrical feedthroughs allow the Anode and Cathode rods to enter the molten bath without breaking the atmospheric seal.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 112.999px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 40.6875px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 40.6875px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 40.6875px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eENSMMSEF (ENS-MMSEF)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.2374%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAC220V±10%, single phase, 50\/60Hz, 1500 W \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 72.312px;\"\u003e\n\u003ctd style=\"width: 28.2374%; height: 72.312px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%; height: 72.312px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eCompact Design\u003c\/em\u003e: good option for operating in a small glovebox or humehood. \u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eElectrode Motion\u003c\/em\u003e: High precision handwheel can be used to stably drive the electrode set up\/down and control the immersion depth in molten salt electrolyte. \u003c\/li\u003e\n\u003cli\u003eAll-in-One Design: the heating furnace, electrode stack and electrode tubes are integrated designed for easy installation and operation.  \u003c\/li\u003e\n\u003cli\u003eSmall Amount of Expensive or Rare Samples for R\u0026amp;D purpose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.2374%;\"\u003e\u003cem\u003eTechnical Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Temperature: Max. 1200℃ (accuracy: ±1℃)\u003c\/li\u003e\n\u003cli\u003eRecommended Heating Rate: ≤10℃\/min\u003c\/li\u003e\n\u003cli\u003eHeating Zone Size: L100*W100*H100 mm\u003c\/li\u003e\n\u003cli\u003eTraverse Distance: Max. 60 mm\u003c\/li\u003e\n\u003cli\u003eCrucible Size: φ60*60mm\u003c\/li\u003e\n\u003cli\u003eElectrode Rod Size: Φ10*314mm with M5 screws\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eHeating Element: Alloy Resistance Wires, K-type thermocouple. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.2374%;\"\u003e\u003cem\u003eNotes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlease do not open the furnace door when the temperature is higher than 300℃\u003c\/li\u003e\n\u003cli\u003eThe minor cracks on the furnace hearth during continuous operation is normal.\u003c\/li\u003e\n\u003cli\u003eOne-year warranty and life-time technical support \u0026amp; service \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.2374%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL256 * D265mm * H585 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.2374%;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 71.4029%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~14 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"NBD","offers":[{"title":"Default Title","offer_id":47561088696550,"sku":"ENSMMSEF","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENSMMSEF_main.png?v=1776876083"},{"product_id":"enmmsef","title":"ECS-NM Molten Salt Electrolysis Furnace (Max. 1200℃), ENMMSEF","description":"\u003cp\u003eA Molten Salt Electrolysis Furnace is a specialized high-temperature reactor designed for the electrochemical extraction of metals (like Li, Al, or Rare Earths) and the processing of advanced nuclear or solar thermal salts. It is a primary tool for studying the electrowinning of Lithium or the high-temperature behavior of halide\/carbonate salts. The \"Glovebox Compatible\" requirement is critical because most molten salts (especially chlorides and fluorides) are highly hygroscopic and will react with moisture to form corrosive HCl or HF gases.\u003c\/p\u003e\n\u003cp\u003eUnlike standard muffle furnaces, an molten salt electrolysis system must integrate high-current DC power with an ultra-dry, inert atmosphere to prevent the highly reactive molten metal from oxidizing or exploding upon contact with moisture. (1) \u003cstrong\u003eHeating Zone\u003c\/strong\u003e: Modern industrial-grade units (like the ZYLAB G1200-600) utilize a combination of Bottom and Circumferential Ring Heating to ensure thermal uniformity. This prevents \"cold spots\" that can cause salt solidification and disrupt ion transport. (2) \u003cstrong\u003eReaction Chamber\u003c\/strong\u003e: Typically constructed from 316L Stainless Steel or Quartz with high-purity alumina fiber insulation. (3) \u003cstrong\u003eDC Power Supply\u003c\/strong\u003e: High-current, low-voltage specifications are standard (e.g., 5V \/ 1000A). Precise current control is essential for managing the overpotential required to plate specific metals without triggering side reactions. (4) \u003cstrong\u003eElectrode Setup\u003c\/strong\u003e: Often features a Titanium or Molybdenum cathode and a Graphite anode. In pilot systems, manual spiral feeders allow for semi-continuous operation without breaking the vacuum.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 112.999px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 40.6875px;\"\u003e\n\u003ctd style=\"width: 20.3943%; height: 40.6875px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%; height: 40.6875px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eENMMSEF (ENM-MSEF)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAC220V±10%, single phase, 50\/60Hz, 9.5 kW \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 72.312px;\"\u003e\n\u003ctd style=\"width: 20.3943%; height: 72.312px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%; height: 72.312px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHigh temperature stability and uniformity with resistance heating  \u003c\/li\u003e\n\u003cli\u003eDual-heating zones with individual temperature control\u003c\/li\u003e\n\u003cli\u003eHigh purity alumina insulation layer for temperature maintenance.  \u003c\/li\u003e\n\u003cli\u003eAnti-corrosion and sealing design: Al2O3, graphite, or special metal alloy-based heating hearth that is compatible with Cl-, F- corrosive molten salt. \u003c\/li\u003e\n\u003cli\u003eInert gases (Ar\/N2) could be flowed to maintain a O2\/H2O-free environment\u003c\/li\u003e\n\u003cli\u003eElectrochemical functions with reserved three-electrode ports; The high-temperature reference electrode (eg: Ag\/AgCl, Bi\/BiCl3) and conductive wires. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENSMMSEF_02_100x100.jpg?v=1777614712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003eTechnical Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Temperature: Max. 1200℃ (accuracy: ±1℃) for short time (\u0026lt;30 min). Continuous operation at 1150℃\u003c\/li\u003e\n\u003cli\u003eThermocouple: K-type with φ2*280mm\u003c\/li\u003e\n\u003cli\u003eRecommended Heating Rate: ≤10℃\/min\u003c\/li\u003e\n\u003cli\u003eHeating Hearth: Φ250*300mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAl2O3 Crucible Sizes: (1) φ160*200mm (3L), 1 piece; (2) φ160*160mm (2.6L), 1 piece; (3) φ170*90mm (1.6L), 1 piece; (4) 310S crucible with φ168*233mm (5L), 2 pieces\u003c\/li\u003e\n\u003cli\u003eFlow Meter: 0.1-1.5 L\/min\u003c\/li\u003e\n\u003cli\u003eGas Inlet: Φ6.35mm double-clamps\u003c\/li\u003e\n\u003cli\u003eGas Outlet: D14 mm barber fitting\u003c\/li\u003e\n\u003cli\u003eVacuum Pump: DRV10 with KF25 connection port\u003c\/li\u003e\n\u003cli\u003eWater Chiller Tank: 10 L \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003eNotes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlease do not open the furnace door when the temperature is higher than 300℃\u003c\/li\u003e\n\u003cli\u003eThe minor cracks on the furnace hearth during continuous operation is normal.\u003c\/li\u003e\n\u003cli\u003eOne-year warranty and life-time technical support \u0026amp; service \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL880 * D760mm * H1150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~190 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"NBD","offers":[{"title":"Default Title","offer_id":47597935821030,"sku":"ENMMSEF","price":19999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/Molten_Salt_Electrolysis_02.png?v=1777618772"},{"product_id":"enmvmsef","title":"ECS-NM Vacuum Molten Salt Electrolysis Furnace (Max. 1200℃), ENMVMSEF","description":"\u003cp\u003eA Vacuum Molten Salt Electrolysis (VMSE) Furnace is a highly specialized reactor designed to perform electrolysis within a molten salt bath while maintaining a controlled vacuum or low-pressure environment.\u003c\/p\u003e\n\u003cp\u003eWhile standard molten salt electrolysis furnaces operate under inert gas, a VMSE system provides three distinct advantages for high-purity battery research: (1) \u003cstrong\u003eEnhanced Degassing\u003c\/strong\u003e: Vacuum pulls residual moisture and oxygen from the salt before melting, which is vital for Prussian Blue or NFPP synthesis where even trace H2O can cause lattice instability. (2) \u003cstrong\u003eLow-Pressure Metal Collection\u003c\/strong\u003e: During the production of Metallic Sodium or Lithium, the vacuum helps in the \"distillation\" or separation of the metal from the electrolyte bath, leading to higher purity. (3) \u003cstrong\u003eRemoval of Halogen Gases\u003c\/strong\u003e: If you are electrolyzing chloride or fluoride salts, the vacuum system (paired with specialized scrubbers) ensures that toxic gases like Cl2 or F2 are efficiently removed from the reaction zone, protecting the heating elements from corrosion.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 112.999px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 40.6875px;\"\u003e\n\u003ctd style=\"width: 20.3943%; height: 40.6875px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%; height: 40.6875px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eENMVMSEF (ENM-VMSEF)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAC220V±10%, single phase, 50\/60Hz, 8.8 kW \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 72.312px;\"\u003e\n\u003ctd style=\"width: 20.3943%; height: 72.312px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%; height: 72.312px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum environment to avoid side reaction and get high purity electrolysis product\u003c\/li\u003e\n\u003cli\u003eHigh temperature and uniform current distribution for flat and dense electroplating layer\u003c\/li\u003e\n\u003cli\u003eAccurate temperature control system and fluctuation less than ±1℃.\u003c\/li\u003e\n\u003cli\u003eAutomatic molten salt feeding and discharge can be supplied upon request\u003c\/li\u003e\n\u003cli\u003eSafety protection for over-heating and gas leaking alarm system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003eTechnical Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Temperature: Max. 1200℃ (accuracy: ±1℃) for short time (\u0026lt;30 min). Continuous operation at 1150℃\u003c\/li\u003e\n\u003cli\u003eThermocouple: K-type with φ2*280mm\u003c\/li\u003e\n\u003cli\u003eRecommended Heating Rate: ≤10℃\/min\u003c\/li\u003e\n\u003cli\u003eHeating Hearth: Φ250*300mm, heating element: Mo-doped Fe-Cr-Al alloy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReactor: 310S reactor with φ203*497mm (I.D. φ191 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSEF_05_100x100.png?v=1777619626\" alt=\"\" style=\"float: none;\" width=\"126\" height=\"72\"\u003e   \u003cimg height=\"81\" width=\"92\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSEF_04_100x100.png?v=1777619399\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAl2O3 crucible with φ160*160mm (2650ml), 1 piece\u003c\/li\u003e\n\u003cli\u003eFlow Meter: 0.1-1.5 L\/min\u003c\/li\u003e\n\u003cli\u003eGas Inlet: Φ6.35mm double-clamps\u003c\/li\u003e\n\u003cli\u003eGas Outlet: D14 mm barber fitting\u003c\/li\u003e\n\u003cli\u003eVacuum Pump: DRV10 with KF25 connection port\u003c\/li\u003e\n\u003cli\u003eWater Chiller Tank: 10 L \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003eNotes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlease do not open the furnace door when the temperature is higher than 300℃\u003c\/li\u003e\n\u003cli\u003eThe minor cracks on the furnace hearth during continuous operation is normal.\u003c\/li\u003e\n\u003cli\u003eOne-year warranty and life-time technical support \u0026amp; service \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL880 * D760mm * H1150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.3943%;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 79.246%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~200 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"NBD","offers":[{"title":"Default Title","offer_id":47600210837734,"sku":"ENMVMSEF","price":21999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSEF_03.png?v=1777619291"},{"product_id":"enmhpvmsf","title":"ECS-NM High Pressure (≤8MPa) \u0026 Vacuum Molten Salt Electrolysis Furnace (Max. 1000℃), ENMHPVMSF","description":"\u003cp\u003eWhile a vacuum-only furnace removes oxygen and moisture, adding high-pressure (HP) capabilities allows operator to manipulate the thermodynamics of the melt and the vapor pressure of volatile metals.\u003c\/p\u003e\n\u003cp\u003eThe \"High Pressure \u0026amp; Vacuum\" designation means the furnace can cycle between two distinct operational modes within a single synthesis or extraction run: (1) \u003cstrong\u003eVacuum phase\u003c\/strong\u003e: Removes H2O and O2 from the salt crystals (e.g., NaCl, AlCl3). (2) \u003cstrong\u003eHigh Pressure Phase\u003c\/strong\u003e: Prevents the newly formed molten metal from vaporizing. By increasing the inert gas (Ar) pressure to 2–10 bar, you effectively raise the boiling point of the metal, keeping it liquid and stable.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 924.087px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eENMHPVMSF (ENM-HPVMSEF)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAC220V±10%, three-phases, 50\/60Hz, 6.0 kW \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 145.6px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eReactor vessel can be operated at high pressure \u0026amp; vacuum conditions\u003c\/li\u003e\n\u003cli\u003ePID temperature control to maintain temperature fluctuation ±1℃\u003c\/li\u003e\n\u003cli\u003eHigh purity Al2O3 insulation material\u003c\/li\u003e\n\u003cli\u003eData recording and storage for more than 30 days\u003c\/li\u003e\n\u003cli\u003ePre-setting parameter recipes (up to 20)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 355.487px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 355.487px;\"\u003e\u003cem\u003eTechnical Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 355.487px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Temperature: Max. 1000℃ (accuracy: ±1℃)\u003c\/li\u003e\n\u003cli\u003eThermocouple: K-type with φ2*280mm\u003c\/li\u003e\n\u003cli\u003eRecommended Heating Rate: ≤5℃\/min\u003c\/li\u003e\n\u003cli\u003eOperation Pressure: ≤8MPa (±0.1Mpa)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReactor: 310S reactor with φ112*230mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSEF_05_100x100.png?v=1777619626\" alt=\"\" style=\"float: none;\" width=\"126\" height=\"72\"\u003e   \u003cimg height=\"78\" width=\"123\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMHPVMSF_02_100x100.png?v=1777622835\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAl2O3 crucible with φ160*160mm (2650ml), 1 piece\u003c\/li\u003e\n\u003cli\u003eFlow Meter: 0.1-1.5 L\/min\u003c\/li\u003e\n\u003cli\u003eGas Inlet: Φ6.35mm double-clamps\u003c\/li\u003e\n\u003cli\u003eGas Outlet: D14 mm barber fitting\u003c\/li\u003e\n\u003cli\u003eVacuum Pump: DRV10 with KF25 connection port\u003c\/li\u003e\n\u003cli\u003eWater Chiller Tank: 10 L \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 106.6px;\"\u003e\u003cem\u003eGas Pre-Heating Unit (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 106.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe gas pre-heating unit (316L) with a maximum temperature of 600℃ can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMHPVMSF_03_100x100.png?v=1777648279\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 126px;\"\u003e\u003cem\u003eNotes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlease do not open the furnace door when the temperature is higher than 300℃\u003c\/li\u003e\n\u003cli\u003eThe minor cracks on the furnace hearth during continuous operation is normal.\u003c\/li\u003e\n\u003cli\u003eOne-year warranty and life-time technical support \u0026amp; service \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL880 * D760mm * H1150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~220 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"NBD","offers":[{"title":"Default Title","offer_id":47601403101414,"sku":"ENMHPVMSF","price":24999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMHPVMSF_main.png?v=1777621429"},{"product_id":"enmmsfqw","title":"ECS-NM Molten Salt Electrolysis Furnace (Max. 1200℃) with Quartz Window for In-Situ \u0026 Operando Characterization, ENMMSFQW","description":"\u003cp\u003eAn In-Situ \u0026amp; Operando Molten Salt Electrolysis (MSE) Furnace with a Quartz Window is a sophisticated research instrument designed to allow real-time observation of electrochemical reactions at high temperatures.\u003c\/p\u003e\n\u003cp\u003eThe inclusion of an optical-grade quartz window transforms a standard \"black box\" furnace into a diagnostic lab. It enables three primary types of characterization: (1) \u003cstrong\u003eIn-Situ Optical Microscopy\u003c\/strong\u003e: Direct visualization of the electrode-electrolyte interface. Operator can watch the growth of sodium metal (or dendrites) in real-time as cycling the cell. (2) \u003cstrong\u003eRaman \u0026amp; UV-Vis Spectroscopy\u003c\/strong\u003e: By shining a laser through the window, operator can identify the vibration modes of complex ions (e.g., PO4^{3-} in NFPP melts) and monitor the oxidation state of transition metals (Fe^{2+}\/Fe^{3+}) in real time. (3) \u003cstrong\u003eX-Ray Compatibility\u003c\/strong\u003e: While quartz is used for optical light, specialized versions of these furnaces use Beryllium (Be) or Silicon Nitride (Si3N4) windows for operando XRD or X-Ray Absorption Spectroscopy (XAS) at synchrotron facilities.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 924.087px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eENMMSFQW (ENM-MSEFQW)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAC220V±10%, single phase, 50\/60Hz, 2.2 kW \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 145.6px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAdopts the module of contact-less silicon controlled rectifier (SCR) for stable and accurate temperature control\u003c\/li\u003e\n\u003cli\u003eThe alloy heating wires are roundly distributed and ensure temperature uniformity \u003c\/li\u003e\n\u003cli\u003eMultiple electrode sets for convenient switch\u003c\/li\u003e\n\u003cli\u003eHigh purity quartz window and 310S reactor \u003c\/li\u003e\n\u003cli\u003eWater cooling flange was used to protect the sealing O-ring and ensure the sealing quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 355.487px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 355.487px;\"\u003e\u003cem\u003eTechnical Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 355.487px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Temperature: Max. 1200℃ (accuracy: ±1℃, less than 1 h)\u003c\/li\u003e\n\u003cli\u003eContinuous operation at 1100℃ or less\u003c\/li\u003e\n\u003cli\u003eThermocouple: K-type with φ2*280mm\u003c\/li\u003e\n\u003cli\u003eRecommended Heating Rate: ≤20℃\/min\u003c\/li\u003e\n\u003cli\u003eFurnace Hearth: Φ150*200mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReactor: 310S reactor with φ112*230mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg height=\"72\" width=\"126\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSEF_05_100x100.png?v=1777619626\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSEF_04_100x100.png?v=1777619399\"\u003e   \u003cimg height=\"88\" width=\"111\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMMSFQW_02_100x100.png?v=1777651663\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAl2O3 crucible with φ160*160mm (2650ml), 1 piece\u003c\/li\u003e\n\u003cli\u003eFlow Meter: 0.1-1.5 L\/min\u003c\/li\u003e\n\u003cli\u003eGas Inlet: Φ6.35mm double-clamps\u003c\/li\u003e\n\u003cli\u003eGas Outlet: D14 mm barber fitting\u003c\/li\u003e\n\u003cli\u003eVacuum Pump: DRV10 with KF25 connection port\u003c\/li\u003e\n\u003cli\u003eWater Chiller Tank: 10 L \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 106.6px;\"\u003e\u003cem\u003eGas Pre-Heating Unit (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 106.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe gas pre-heating unit (316L) with a maximum temperature of 600℃ can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMHPVMSF_03_100x100.png?v=1777648279\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 126px;\"\u003e\u003cem\u003eNotes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlease do not open the furnace door when the temperature is higher than 300℃\u003c\/li\u003e\n\u003cli\u003eThe minor cracks on the furnace hearth during continuous operation is normal.\u003c\/li\u003e\n\u003cli\u003eOne-year warranty and life-time technical support \u0026amp; service \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL800 * D660mm * H1050 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~80 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"NBD","offers":[{"title":"Default Title","offer_id":47610165559526,"sku":"ENMMSFQW","price":21999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMMSFQW_main.png?v=1777651026"},{"product_id":"enmvmsfscg","title":"ECS-NM Vacuum Molten Salt Electrolysis Furnace (Max. 1000℃) Integrated with Single Chamber Glovebox, ENMVMSFSCG","description":"\u003cp\u003eThe integration of a Vacuum Molten Salt Electrolysis (VMSE) Furnace into a Single Chamber Glovebox is designed for the \"seamless\" transition of hygroscopic salts and reactive metals from a pristine inert environment directly into a high-temperature reaction zone without ever breaking atmospheric integrity.\u003c\/p\u003e\n\u003cp\u003eIn this configuration, the furnace is not merely \"placed\" inside the box. Instead, the furnace is typically a Well Furnace (Bottom-Loading) attached to the floor of the glovebox. (1) \u003cstrong\u003eAtmospheric Isolation\u003c\/strong\u003e: The glovebox maintains an Ar atmosphere with \u0026lt;1 ppm H2O\/O2. The furnace \"well\" hangs below the floor, allowing operator to lower crucibles of samples into the heat zone from the top. (2) \u003cstrong\u003eThermal Management\u003c\/strong\u003e: To prevent the glovebox seals from melting, the interface between the furnace and the box floor is equipped with a Water-Cooled Flange. This ensures the glovebox interior remains at a safe temperature even when the furnace hits 1000℃. (3) \u003cstrong\u003eDual-Environment Control\u003c\/strong\u003e: The furnace well is often its own Vacuum-Tight Chamber. This allows operator to evacuate the furnace to high vacuum while the glovebox remains at a slight positive pressure.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 1030.45px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eENMVMSFSCG (ENM-VMSFSCG)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAC380V±10%, three-phases, 50\/60Hz, 11 kW \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 145.6px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe electrolysis can be operated at vacuum or atmosphere-control environment.\u003c\/li\u003e\n\u003cli\u003eAdvanced PID control for achieving stable and accurate temperature control\u003c\/li\u003e\n\u003cli\u003eFurnace hearth adopts the high purity alumina insulation fiber material for better temperature maintenance. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 402.85px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 402.85px;\"\u003e\u003cem\u003eTechnical Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 402.85px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Temperature: Max. 1000℃ (accuracy: ±1℃)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermocouple: K-type with φ2*280mm\u003c\/li\u003e\n\u003cli\u003eRecommended Heating Rate: ≤10℃\/min\u003c\/li\u003e\n\u003cli\u003eFurnace Hearth: Φ350*320mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReactor: 310S reactor with φ273*475mm\u003c\/li\u003e\n\u003cli\u003eUltimate Vacuum Level: 8000 Pa. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg height=\"72\" width=\"126\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSEF_05_100x100.png?v=1777619626\"\u003e       \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlovebox Antechamber and 310S reactor \u0026amp; crucible; The crucible is electrically driven up and down.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSFSCG_03_100x100.png?v=1777654058\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSFSCG_02_100x100.png?v=1777654058\" alt=\"\" style=\"float: none;\" width=\"121\" height=\"78\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eO2\/H2O level: \u0026lt;1 ppm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 165.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 165.6px;\"\u003e\u003cem\u003eGas Pre-Heating Unit (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 165.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe gas pre-heating unit (316L) with a maximum temperature of 600℃ can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMHPVMSF_03_100x100.png?v=1777648279\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 126px;\"\u003e\u003cem\u003eNotes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe gas tank should have a second-state pressure regulator to ensure the safety gas flow into the furnace reactor.\u003c\/li\u003e\n\u003cli\u003eThe maximum temperature of 310S reactor vessel\u0026lt;1100℃\u003c\/li\u003e\n\u003cli\u003eThe sealing between cover and reactor should be well tight to avoid the gas leaking and protect the gloves. \u003c\/li\u003e\n\u003cli\u003eIf the pressure gauge value \u0026gt; 0.15 MPa, the pressure release valve should be immediately open for safety. \u003c\/li\u003e\n\u003cli\u003eThe minor cracks on the furnace hearth during continuous operation is normal.\u003c\/li\u003e\n\u003cli\u003eOne-year warranty and life-time technical support \u0026amp; service \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1850 * D880mm * H1990 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.7577%; height: 47.6px;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.8826%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~500 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"NBD","offers":[{"title":"Default Title","offer_id":47610800734438,"sku":"ENMVMSFSCG","price":59999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMVMSFSCG_main.png?v=1777653955"},{"product_id":"enmmsfdcgtf","title":"ECS-NM Molten Salt Electrolysis Furnace (Max. 1200℃) Integrated with Dual-Chamber Glovebox and Tube Furnace (Max. 1700℃), ENMMSFDCGTF","description":"\u003cp\u003eThis system combines a single-chamber glovebox with two distinct furnace architectures: a Well Furnace for bulk electrolysis and a Tube Furnace for precise material synthesis and surface treatment. This integrated approach eliminates \"transport lag,\" ensuring that precursors and synthesized powders never touch ambient moisture (\u0026lt;1 ppm H2O). This platform functions as a closed-loop mini-factory where materials move between states (powder, molten, solid) in a continuous inert stream.\u003c\/p\u003e\n\u003cp\u003eThe integrated tube furnace (1700 ℃) is used for the \"dry\" side of sample processing: (1) \u003cstrong\u003eControlled Atmosphere Calcination\u003c\/strong\u003e: Ideal for synthesizing NNFMO or NFPP precursors in a flowing Ar or Ar\/H2 environment. (2) \u003cstrong\u003eSurface Engineering\u003c\/strong\u003e: Can be used for thermal vapor deposition or coating active materials before they are moved to the dry electrode line. (3)\u003cstrong\u003e Loading Concept\u003c\/strong\u003e: The furnace tube is physically connected to the side of the glovebox. Operator slides the boat of precursors from the box into the tube, seal the flange, and start the program without exposing the sample to the room.\u003c\/p\u003e\n\u003cp\u003eThe well furnace (1200 ℃ handles the high-current electrochemical work): (1) \u003cstrong\u003eVertical Operation\u003c\/strong\u003e: Allows for large crucibles (up to 5 L) to be lowered into the heating zone. (2) \u003cstrong\u003eHigh-Current Feedthroughs\u003c\/strong\u003e: Integrated into the \"lid\" of the well, supporting the 1000A to 4000A required for pilot-scale sodium production. (3) \u003cstrong\u003eHeat Management\u003c\/strong\u003e: Water-cooled flanges prevent the glovebox seals from degrading, even if the well is at 1200℃.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 1204.4px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.1063%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 77.7139%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eENMMSFDCGTF (ENM-MSFDCGTF)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 282.8px;\"\u003e\n\u003ctd style=\"width: 22.1063%; height: 282.8px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 77.7139%; height: 282.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe dual-chamber glovebox with inert gas environment can be used for air\/humidity sensitive sample pre-treatment (eg: weigh, mix, filling) and post-treatment (crushing, grinding, milling, and sealing). \u003c\/li\u003e\n\u003cli\u003eThe glovebox connect the tube furnace and well electrolysis furnace for sample transfer\u003c\/li\u003e\n\u003cli\u003eThe high temperature tube furnace can be used for sample pre-processing (heating, sintering, reduction, and carbonization) and sensitive solid-state reactions. \u003c\/li\u003e\n\u003cli\u003eThe well electrolysis furnace with automatic lift can be used for metal\/alloy electrodeposition, electroreduction of metal oxide\/minerals, high temperature electrochemical testing of solid\/liquid electrode materials, as well as electrolysis refining. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 302.4px;\"\u003e\n\u003ctd style=\"width: 22.1063%; height: 302.4px;\"\u003e\u003cem\u003eTechnical Features of Molten Salt Electrolysis Furnace\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 77.7139%; height: 302.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAC220V±10%, single phase, 50\/60Hz, 3.5 kW \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eHeating Temperature: Max. 1200℃ (accuracy: ±1℃, less than 1h)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContinuous Operation: 1150℃\u003c\/li\u003e\n\u003cli\u003eThermocouple: K-type with φ2*280mm\u003c\/li\u003e\n\u003cli\u003eRecommended Heating Rate: ≤10℃\/min\u003c\/li\u003e\n\u003cli\u003eFurnace Hearth: Φ150*200mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReactor: 310S reactor with φ104*360mm\u003c\/li\u003e\n\u003cli\u003eAlumina Crucible: φ60*60mm\u003c\/li\u003e\n\u003cli\u003eFlow Meter: 20-200 mL\/min (one channel)\u003c\/li\u003e\n\u003cli\u003eInlet: Φ6.35mm double clamps; Outlet: 12 mm barber fitting\u003c\/li\u003e\n\u003cli\u003eVacuum Pump: DRV5 with KF25 fitting\u003c\/li\u003e\n\u003cli\u003eWater Chiller Tank: 5 L       \u003c\/li\u003e\n\u003cli\u003eO2\/H2O level: \u0026lt;1 ppm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 204.4px;\"\u003e\n\u003ctd style=\"width: 22.1063%; height: 204.4px;\"\u003e\u003cem\u003eTechnical Features of Tube Furnace\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 77.7139%; height: 204.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAC220V±10%, single phase, 50\/60Hz, 4.5 kW \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eHeating Temperature: Max. 1700℃ (accuracy: ±1℃, less than 1h)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContinuous Operation: 1650℃\u003c\/li\u003e\n\u003cli\u003eHeating Element: High purity Si-Mo rods, B-type thermocouple\u003c\/li\u003e\n\u003cli\u003eRecommended Heating Rate: ≤10℃\/min\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAluminum Tube: φ80*1000mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eInlet: Φ6.35mm double clamps; Outlet: 8.4 mm barber fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 22.1063%; height: 106.4px;\"\u003e\u003cem\u003eGlovebox\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 77.7139%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eO2\/H2O level\u0026lt; 1 ppm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe bottom was customized to fit with the well electrolysis furnace\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAutomatic vacuum and cycling\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 165.6px;\"\u003e\n\u003ctd style=\"width: 22.1063%; height: 165.6px;\"\u003e\u003cem\u003eGas Pre-Heating Unit (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 77.7139%; height: 165.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe gas pre-heating unit (316L) with a maximum temperature of 600℃ can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMHPVMSF_03_100x100.png?v=1777648279\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.1063%; height: 47.6px;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 77.7139%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL4420 * D1050mm * H2015 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.1063%; height: 47.6px;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 77.7139%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~1200 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"NBD","offers":[{"title":"Default Title","offer_id":47611533230310,"sku":"ENMMSFDCGTF","price":89999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ENMMSFDCGTF_main.png?v=1777657351"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/ENMVMSEF_03.png?v=1777825576","url":"https:\/\/echemsupplies.com\/collections\/molten-salt-synthesis.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}