{"title":"Planetary Ball Mills","description":"\u003cp\u003e\u003cstrong\u003ePlanetary ball mills are the workhorse of mechanochemical synthesis and nano-scale particle reduction in battery, solid-state electrolyte, and catalyst R\u0026amp;D.\u003c\/strong\u003e By mounting jars on a counter-rotating sun wheel, these mills convert centrifugal acceleration into the high-impact and shear forces needed to break primary crystal bonds, alloy metals mechanically, and drive solvent-free reactions that wet chemistry cannot reach.\u003c\/p\u003e\n\n\u003cp\u003eThe collection covers the full range of planetary configurations used by electrochemistry labs, grouped by what the design optimizes for:\u003c\/p\u003e\n\n\u003ch3\u003eEnergy and speed class\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard high-energy mills\u003c\/strong\u003e — typical operation up to roughly 1100 RPM, suited to routine cathode and anode powder homogenization, conductive-additive dispersion, and ceramic electrolyte particle reduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-speed and powerful units\u003c\/strong\u003e — 1200 RPM class with reinforced drives for harder ceramics such as garnet-type LLZO, NASICON-type LATP\/LAGP, and sulfide precursors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-high-speed mills\u003c\/strong\u003e — 2200 RPM systems for mechanochemical synthesis, rapid mechanical alloying, and nano-phase generation where impact energy must scale with the square of velocity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKinematic and structural variants\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable speed-ratio mills\u003c\/strong\u003e — decouple sun-wheel revolution from jar rotation to tune the impact-to-shear balance for sensitive materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3D (tilting) mills\u003c\/strong\u003e — add a swing axis on top of planetary motion to prevent caking against the jar wall during long milling cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal mills\u003c\/strong\u003e — preferred for high-solids slurries and pilot-scale work where settling in vertical jars becomes problematic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEnvironment-controlled variants\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-spray cooling mills\u003c\/strong\u003e — manage the heat load of sustained high-RPM operation without rotary unions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCryogenic mills\u003c\/strong\u003e — drive jar temperatures below ambient to embrittle polymers, binders, and oxidation-sensitive intermediates so they fracture cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-illuminated (photo) mills\u003c\/strong\u003e — combine mechanical activation with photon excitation for mechano-photocatalysis studies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlovebox-compatible compact mills\u003c\/strong\u003e — sealed and sized to pass through Ar-glovebox antechambers for air-sensitive sulfide and lithium-metal work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWorking volumes in this catalog span from 2 x 100 mL benchtop screening units up to 4 x 1000 mL pilot-scale jars; jar and media materials (zirconia, agate, stainless, tungsten carbide) are selected per product to match the chemistry being processed.\u003c\/p\u003e\n\n\u003cp\u003eIf you are scaling a known recipe, start with the standard high-energy or horizontal mills sized to your batch. For new mechanochemical or solid-state synthesis routes, see the ultra-high-speed and adjustable-ratio units. For air-sensitive sulfide electrolytes, pair a glovebox-compatible mill with our ball mill jars and grinding media.\u003c\/p\u003e\n","products":[{"product_id":"efsmpbm","title":"ECS-FS Mini Planetary Ball Mill (1000 rpm, 4*100 mL), (Ar-Filled Glovebox-Compatible)- EFSMPBM","description":"\u003cp\u003ea Mini Planetary Ball Mill is a foundational too that used to reduce the particle size of active materials (like LFP or NMC) and to ensure a truly homogeneous dispersion of conductive additives (CNTs\/Carbon Black) before the coating process. In a planetary mill, the grinding jars are arranged \"planetarily\" on a rotating sun wheel. The jars rotate in the opposite direction to the sun wheel, creating high-energy centrifugal forces that result in intensive mixing and grinding.\u003c\/p\u003e\n\u003cp\u003eTraditional ball mills rely on gravity, which is too slow for nano-scale battery materials. Planetary mills provide: (1) \u003cstrong\u003eHigh Energy Densit\u003c\/strong\u003ey: The acceleration can exceed 20g to 50g allowing you to achieve sub-micron particle sizes in minutes rather than hours. (2) \u003cstrong\u003eMechanical Alloying\u003c\/strong\u003e: It is excellent for \"coating\" active material particles with conductive carbon. (3) \u003cstrong\u003eUniformity\u003c\/strong\u003e: The multidimensional motion prevents material from \"settling\" at the bottom of the jar.\u003c\/p\u003e\n\u003cp\u003eBasical working mechanism for planetary ball mill:\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSMPBM_02_160x160.png?v=1776023914\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSMPBM (EFS-MPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 150 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 1000 rpm (adjustable). The corresponding revolution speed is 500 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 100 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 400 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide, PTFE, Nylon, Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003eEFSAMJ100\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-SS304_100x100.png?v=1776052645\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-WC_100x100.png?v=1776052645\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-ZrO2_100x100.png?v=1776052645\"\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-PTFE_100x100.png?v=1776052645\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Nylon_100x100.png?v=1776052645\"\u003e  \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Agate_100x100.png?v=1776052645\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavmj50?variant=47534580728038\"\u003eEFSAVMJ50\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-SS304_100x100.png?v=1776057829\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Nylon_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-PTFE_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e       \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-ZrO2_100x100.png?v=1776057940\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-WC_100x100.png?v=1776057940\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Agate_100x100.png?v=1776057829\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 2 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL300 * W370 * H300 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47534093238502,"sku":"EFSMPBM","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSMPBM_main.png?v=1776023914"},{"product_id":"efshmpbm","title":"ECS-FS Horizontal Mini Planetary Ball Mill (1000 rpm, 4*100 mL), (Ar-Filled Glovebox-Compatible)- EFSHMPBM","description":"\u003cp\u003eA Horizontal Planetary Ball Mill represents a structural evolution of the traditional vertical planetary mill. While vertical mills are the standard for benchtop R\u0026amp;D, horizontal configurations are often preferred for larger-scale pilot production or when dealing with slurries that have a high tendency to settle, such as the high-solids NMP-based cathode slurries. In a horizontal mill, the grinding jars are placed horizontally on the sun wheel. As the system rotates, the force of gravity is constantly changing direction relative to the centrifugal forces, creating a unique \"3D\" grinding path.\u003c\/p\u003e\n\u003cp\u003eThe horizontal orientation solves several specific issues encountered during the preparation of advanced battery materials: (1) \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eElimination of Sedimentation\u003c\/strong\u003e: In vertical jars, heavy active material particles (like NMC or LFP) can settle at the bottom of the jar during long milling cycles, leading to non-uniform grinding. In a horizontal mill, gravity prevents \"dead zones\" at the bottom, ensuring the entire batch is processed equally\u003c\/span\u003e. (2) \u003cstrong\u003eEnhanced Mixing Energy\u003c\/strong\u003e: The combination of the planetary motion and the constant \"tumbling\" caused by the horizontal axis creates higher kinetic energy. This is particularly effective for dispersing Carbon Nanotubes (CNTs), which are notoriously difficult to unbundle. (3) \u003cstrong\u003eThermal Management\u003c\/strong\u003e: Horizontal designs often allow for easier integration of liquid cooling systems across the jars, which is critical when processing temperature-sensitive ion-exchange membranes or PTFE-based dry powders.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSHMPBM (EFS-HMPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 150 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eMain feature: \u003cstrong\u003eElimination of Sedimentation\u003c\/strong\u003e during ball milling process\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 1000 rpm (adjustable). The corresponding revolution speed is 500 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 100 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 400 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003eEFSAMJ100\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-SS304_100x100.png?v=1776052645\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-WC_100x100.png?v=1776052645\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-ZrO2_100x100.png?v=1776052645\"\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-PTFE_100x100.png?v=1776052645\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Nylon_100x100.png?v=1776052645\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Agate_100x100.png?v=1776052645\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavmj50?variant=47534580728038\"\u003eEFSAVMJ50\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-SS304_100x100.png?v=1776057829\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Nylon_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-PTFE_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-ZrO2_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-WC_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Agate_100x100.png?v=1776057829\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 2 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL300 * W350 * H420 mm (Ar-filled glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47534572667110,"sku":"EFSHMPBM","price":3199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSHMPBM_main.png?v=1776064107"},{"product_id":"efmmhepbm","title":"ECS-FM Mini High-Energy Planetary Ball Mill (800 rpm, 4*500 mL), (Ar-Filled Glovebox-Compatible)- EFMMHEPBM","description":"\u003cp\u003eA mini high-energy planetary ball mill is a compact, benchtop instrument designed for rapid particle size reduction down to the nano-scale (\u0026lt;100 nm) and high-shear mixing. The \"high-energy\" designation typically refers to the ability to reach high rotational speeds (up to 1100 RPM), which generates the centrifugal forces necessary to break down resilient aggregates.\u003c\/p\u003e\n\u003cp\u003eIn a planetary ball mill, the grinding jars are mounted on a \"sun wheel.\" As the sun wheel rotates, the jars rotate in the opposite direction on their own axes. (1) \u003cstrong\u003eEnergy Transfer\u003c\/strong\u003e: This counter-rotation creates a powerful interaction between centrifugal and Coriolis forces. (2) \u003cstrong\u003eMedia Motion\u003c\/strong\u003e: The grinding balls are launched across the jar (cataracting) to strike the material with high impact energy, while also rolling against the walls (cascading) to provide intensive friction and shear.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMMHEPBM (EFM-MHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 800 rpm (adjustable). The corresponding revolution speed is 400 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL430 * W490 * H420 mm (Ar-filled glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~92 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47534743159014,"sku":"EFMMHEPBM","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMMHEPBM_main.png?v=1776068665"},{"product_id":"efm3dhepbm","title":"ECS-FM Three-Dimensional (3D) High-Energy Planetary Ball Mill (800 rpm, 4*500 mL)- EFM3DHEPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFM3DHEPBM (EFM-3DHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 870 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): Max. 800 rpm (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 3-10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1120 * W685 * H780 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~233 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47535512158438,"sku":"EFM3DHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFM3DHEPBM_main.png?v=1776095626"},{"product_id":"efmhhepbm","title":"ECS-FM Horizontal High-Energy Planetary Ball Mill (800 rpm, 4*500 mL)- EFMHHEPBM","description":"\u003cp\u003eA Horizontal Planetary Ball Mill represents a structural evolution of the traditional vertical planetary mill. While vertical mills are the standard for benchtop R\u0026amp;D, horizontal configurations are often preferred for larger-scale pilot production or when dealing with slurries that have a high tendency to settle, such as the high-solids NMP-based cathode slurries. In a horizontal mill, the grinding jars are placed horizontally on the sun wheel. As the system rotates, the force of gravity is constantly changing direction relative to the centrifugal forces, creating a unique \"3D\" grinding path.\u003c\/p\u003e\n\u003cp\u003eThe horizontal orientation solves several specific issues encountered during the preparation of advanced battery materials: (1) \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eElimination of Sedimentation\u003c\/strong\u003e: In vertical jars, heavy active material particles (like NMC or LFP) can settle at the bottom of the jar during long milling cycles, leading to non-uniform grinding. In a horizontal mill, gravity prevents \"dead zones\" at the bottom, ensuring the entire batch is processed equally\u003c\/span\u003e. (2) \u003cstrong\u003eEnhanced Mixing Energy\u003c\/strong\u003e: The combination of the planetary motion and the constant \"tumbling\" caused by the horizontal axis creates higher kinetic energy. This is particularly effective for dispersing Carbon Nanotubes (CNTs), which are notoriously difficult to unbundle. (3) \u003cstrong\u003eThermal Management\u003c\/strong\u003e: Horizontal designs often allow for easier integration of liquid cooling systems across the jars, which is critical when processing temperature-sensitive ion-exchange membranes or PTFE-based dry powders.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMHHEPBM (EFM-HHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eThe jars are horizontally placed (planetary moving along Y-axis), which is able to \u003cstrong\u003eEliminate the sedimentation in \"dead area\"\u003c\/strong\u003e during ball milling process. \u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. 800 rpm (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 400 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W560 * H510 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~106 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47535800778982,"sku":"EFMHHEPBM","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHHEPBM_main.png?v=1776100649"},{"product_id":"eflhepbm","title":"ECS-FL High-Energy Planetary Ball Mill (800 rpm, 4*1000 mL) - EFLHEPBM","description":"\u003cp\u003eA high-energy planetary ball mill is a compact, benchtop instrument designed for rapid particle size reduction down to the nano-scale (\u0026lt;100 nm) and high-shear mixing. The \"high-energy\" designation typically refers to the ability to reach high rotational speeds (up to 1100 RPM), which generates the centrifugal forces necessary to break down resilient aggregates.\u003c\/p\u003e\n\u003cp\u003eIn a planetary ball mill, the grinding jars are mounted on a \"sun wheel.\" As the sun wheel rotates, the jars rotate in the opposite direction on their own axes. (1) \u003cstrong\u003eEnergy Transfer\u003c\/strong\u003e: This counter-rotation creates a powerful interaction between centrifugal and Coriolis forces. (2) \u003cstrong\u003eMedia Motion\u003c\/strong\u003e: The grinding balls are launched across the jar (cataracting) to strike the material with high impact energy, while also rolling against the walls (cascading) to provide intensive friction and shear.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLHEPBM (EFL-HEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling speed (rotation): Max. 800 rpm (adjustable). The corresponding revolution speed is 400 rpm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflamj1000?variant=47537924276454\"\u003eEFLAMJ1000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-SS304_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Nylon_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-PTFE_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-ZrO2_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-WC_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Agate_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavmj500?variant=47537998921958\"\u003eEFLAVMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e        \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W500 * H500 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~106 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538007179494,"sku":"EFLHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLHEPBM_main.png?v=1776144504"},{"product_id":"efl3dhepbm","title":"ECS-FL Three-Dimensional (3D) High-Energy Planetary Ball Mill (800 rpm, 4*1000 mL)- EFL3DHEPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFL3DHEPBM (EFL-3DHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 870 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): Max. 800 rpm (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 3-10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflamj1000?variant=47537924276454\"\u003eEFLAMJ1000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-SS304_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Nylon_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-PTFE_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-ZrO2_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-WC_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Agate_100x100.png?v=1776140326\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1120 * W685 * H780 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~242 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538032410854,"sku":"EFL3DHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFL3DHEPBM_main.png?v=1776146264"},{"product_id":"eflhhepbm","title":"ECS-FL Horizontal High-Energy Planetary Ball Mill (800 rpm, 4*1000 mL)- EFLHHEPBM","description":"\u003cp\u003eA Horizontal Planetary Ball Mill represents a structural evolution of the traditional vertical planetary mill. While vertical mills are the standard for benchtop R\u0026amp;D, horizontal configurations are often preferred for larger-scale pilot production or when dealing with slurries that have a high tendency to settle, such as the high-solids NMP-based cathode slurries. In a horizontal mill, the grinding jars are placed horizontally on the sun wheel. As the system rotates, the force of gravity is constantly changing direction relative to the centrifugal forces, creating a unique \"3D\" grinding path.\u003c\/p\u003e\n\u003cp\u003eThe horizontal orientation solves several specific issues encountered during the preparation of advanced battery materials: (1) \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eElimination of Sedimentation\u003c\/strong\u003e: In vertical jars, heavy active material particles (like NMC or LFP) can settle at the bottom of the jar during long milling cycles, leading to non-uniform grinding. In a horizontal mill, gravity prevents \"dead zones\" at the bottom, ensuring the entire batch is processed equally\u003c\/span\u003e. (2) \u003cstrong\u003eEnhanced Mixing Energy\u003c\/strong\u003e: The combination of the planetary motion and the constant \"tumbling\" caused by the horizontal axis creates higher kinetic energy. This is particularly effective for dispersing Carbon Nanotubes (CNTs), which are notoriously difficult to unbundle. (3) \u003cstrong\u003eThermal Management\u003c\/strong\u003e: Horizontal designs often allow for easier integration of liquid cooling systems across the jars, which is critical when processing temperature-sensitive ion-exchange membranes or PTFE-based dry powders.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLHHEPBM (EFL-HHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePlanetary grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eThe jars are horizontally placed (planetary moving along Y-axis), which is able to \u003cstrong\u003eEliminate the sedimentation in \"dead area\"\u003c\/strong\u003e during ball milling process. \u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. 800 rpm (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflamj1000?variant=47537924276454\"\u003eEFLAMJ1000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-SS304_100x100.png?v=1776140326\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Nylon_100x100.png?v=1776140326\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-PTFE_100x100.png?v=1776140326\"\u003e\u003c\/p\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-ZrO2_100x100.png?v=1776140326\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-WC_100x100.png?v=1776140326\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAMJ1000-Agate_100x100.png?v=1776140326\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavmj500?variant=47537998921958\"\u003eEFLAVMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W560 * H510 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~115 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.chemmater.4c00332\"\u003eC. Welch, et al., Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis, Chem. Mater. 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538052497638,"sku":"EFLHHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLHHEPBM_main.png?v=1776146251"},{"product_id":"efmhsppbm","title":"ECS-FM High-Speed \u0026 Powerful Planetary Ball Mill (1200 rpm, 4*500 mL)- EFMHSPPBM","description":"\u003cp\u003eA high-speed unit typically operates between 800 and 1100 RPM, generating the massive G-forces required for nano-milling and mechanical alloying.\u003c\/p\u003e\n\u003cp\u003eIn a planetary mill, the jars rotate in the opposite direction to the sun wheel. As you increase the RPM, the energy delivered to your material increases exponentially. (1) \u003cstrong\u003eImpact Energy\u003c\/strong\u003e: At 1000 RPM, the grinding balls (typically Zirconia) are launched with enough kinetic energy to break the primary crystal bonds of hard ceramic electrolytes like YSZ or BZCYYb. (2) \u003cstrong\u003eShear Intensity\u003c\/strong\u003e: The high rotational velocity creates intense friction between the balls and the jar wall. This is critical for unbundling Carbon Nanotubes (CNTs) and achieving a perfect \"percolating network\" in your NMP-based slurries.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMHSPPBM (EFM-HSPPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1200 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall milling in vacuum or inert gas environment is feasible. \u003c\/li\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e              \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eJar Number Upgrade (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIf customer want to upgrade the jar number from 4 to 6, we can supply it as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_04_100x100.png?v=1776183857\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_05_100x100.png?v=1776183857\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~326 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538084446438,"sku":"EFMHSPPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMHSPPBM_main.png?v=1776148300"},{"product_id":"efsuhsmpbm","title":"ECS-FS Ultra-High-Speed Mini Planetary Ball Mill (2200 rpm, 2*100 mL) (Ar-Filled Glovebox Compatible), EFSUHSMPBM","description":"\u003cp\u003eA planetary ball mill reaching 2200 RPM represents the extreme upper limit of mechanical milling technology. While standard high-speed mills typically top out at 1100 RPM, a 2200 RPM system is a specialized \"Ultra-High Energy\" instrument designed for mechano-chemistry, nano-phase synthesis, and rapid mechanical alloying.\u003c\/p\u003e\n\u003cp\u003eAt 2200 RPM, the centrifugal acceleration can reach over 100g (100 times the force of gravity). (1) \u003cstrong\u003eImpact Power\u003c\/strong\u003e: The kinetic energy (Ek =1\/2mv^2) increases with the square of the velocity. Doubling the speed from 1100 to 2200 RPM results in four times the impact energy. (2) \u003cstrong\u003eMilling Time\u003c\/strong\u003e: Processes that take 4 hours in a standard mill can often be completed in 15–30 minutes, significantly increasing your R\u0026amp;D throughput.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSUHSMPBM (EFS-UHSPPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or AC220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e2200 rpm\u003c\/span\u003e (adjustable, the corresponding revolution speed is 1100 rpm).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: 100 mL\/each (2 jars for operation balance). The maximum processing capacity is 200 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall milling in vacuum or inert gas environment is feasible. \u003c\/li\u003e\n\u003cli\u003eSealed or Vacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsasmj?variant=47538252546278\"\u003eEFSASMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e     \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ100-SS304_100x100.png?v=1776154853\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ80-PTFE_100x100.png?v=1776154853\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ80-ZrO2_100x100.png?v=1776154854\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSASMJ80-WC_100x100.png?v=1776154854\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 2 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL360 * W480 * H340 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~45 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538114855142,"sku":"EFSUHSMPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSUHSMPBM_main.png?v=1776155690"},{"product_id":"efsm3dpbm","title":"ECS-FS Mini Three-Dimensional (3D) Planetary Ball Mill (900 rpm, 4*100 mL), EFSM3DPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSM3DPBM (EFS-M3DPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 370 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 900 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 100 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003eEFSAMJ100\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-SS304_100x100.png?v=1776052645\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-WC_100x100.png?v=1776052645\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-ZrO2_100x100.png?v=1776052645\"\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-PTFE_100x100.png?v=1776052645\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Nylon_100x100.png?v=1776052645\"\u003e  \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsamj100?variant=47534558740710\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAMJ100-Agate_100x100.png?v=1776052645\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavmj50?variant=47534580728038\"\u003eEFSAVMJ50\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-SS304_100x100.png?v=1776057829\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Nylon_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-PTFE_100x100.png?v=1776057940\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-ZrO2_100x100.png?v=1776057940\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-WC_100x100.png?v=1776057940\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVMJ50-Agate_100x100.png?v=1776057829\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 2 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL720 * W500 * H500 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~66 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47538966659302,"sku":"EFSM3DPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSM3DPBM_main.png?v=1776182327"},{"product_id":"eflhsppbm","title":"ECS-FL High-Speed \u0026 Powerful Planetary Ball Mill (1200 rpm, 4*1000 mL), EFLHSPPBM","description":"\u003cp\u003eA high-speed unit typically operates between 800 and 1100 RPM, generating the massive G-forces required for nano-milling and mechanical alloying.\u003c\/p\u003e\n\u003cp\u003eIn a planetary mill, the jars rotate in the opposite direction to the sun wheel. As you increase the RPM, the energy delivered to your material increases exponentially. (1) \u003cstrong\u003eImpact Energy\u003c\/strong\u003e: At 1000 RPM, the grinding balls (typically Zirconia) are launched with enough kinetic energy to break the primary crystal bonds of hard ceramic electrolytes like YSZ or BZCYYb. (2) \u003cstrong\u003eShear Intensity\u003c\/strong\u003e: The high rotational velocity creates intense friction between the balls and the jar wall. This is critical for unbundling Carbon Nanotubes (CNTs) and achieving a perfect \"percolating network\" in your NMP-based slurries.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLHSPPBM (EFL-HSPPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1200 rpm\u003c\/span\u003e (adjustable, the corresponding maximum revolution speed is 600 rpm). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 1000 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 4000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall milling in vacuum or inert gas environment is feasible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavmj500?variant=47537998921958\"\u003eEFLAVMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-SS304_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Nylon_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-PTFE_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-ZrO2_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-WC_100x100.png?v=1776141855\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVMJ500-Agate_100x100.png?v=1776141855\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 20 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~336 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539057098982,"sku":"EFLHSPPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLHSPPBM_main.png?v=1776183614"},{"product_id":"efmplipbm","title":"ECS-FM Light-Illuminated Planetary Ball Mill (900 rpm, 4*500 mL) for Photocatalysis, EFMPLIPBM","description":"\u003cp\u003eA Light-Illuminated Planetary Ball Mill (often called a Photo-Planetary Mill) is a specialized instrument that merges mechanochemistry with photocatalysis. For a researcher focused on advanced energy materials, this setup allows to drive chemical reactions through the simultaneous application of high-energy mechanical impact and photon excitation.\u003c\/p\u003e\n\u003cp\u003eWhile a standard planetary mill uses centrifugal force to provide kinetic energy, the illuminated version introduces an optical path into the grinding chamber. (1) \u003cstrong\u003eMechanical Activation\u003c\/strong\u003e: The high-speed rotation (typically up to 1100 RPM) creates fresh, highly reactive \"nascent\" surfaces on the catalyst particles by constantly breaking and reforming chemical bonds. (2) \u003cstrong\u003ePhoto-Excitation\u003c\/strong\u003e: Integrated LED or fiber-optic light sources (ranging from UV to Visible Light) provide the photons necessary to excite electrons from the valence band to the conduction band of your photocatalyst (e.g., TiO2, g-C3N4). (3) \u003cstrong\u003eSynergy\u003c\/strong\u003e: The milling prevents the \"shielding effect\" where surface-reacted layers block light from reaching the bulk material. Constant tumbling ensures 100% of the material is exposed to the light source.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMPLIPBM (EFM-P-LIPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding under light illumination\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e900 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLight Source\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe LED light sources with various wavelengths, such as blue, green, yellow, infrared, UV, and white, are available. Please specific the light source types and intensity. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMPLIPBM_02_100x100.png?v=1776192430\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Tempered glass, \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling Balls: ZrO2 and agate can be supplied.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMPLIPBM_03_100x100.png?v=1776192711\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL570 * W570 * H420 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~92 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/10.1021\/acsami.0c19945\"\u003eH. Li, et al., Highly Selective Photocatalytic CO2 Reduction to CH4 by Ball-Milled Cubic Silicon Carbide Nanoparticles under Visible-Light Irradiation, ACS Appl. Mater. Interfaces 2021, 13, 4, 5073–5078\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S1385894725010332\"\u003eR. Ma, et al., Enhanced photocatalytic hydrogen evolution via ball-milled PtO2\/TiO2 \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S1385894725010332\"\u003eheterojunction photocatalyst: An alternative approach for efficient energy production, Chem. Engineering J., 2023, 34, 104004\u003c\/a\u003e. \u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539269828838,"sku":"EFMPLIPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMPLIPBM_main.png?v=1776192430"},{"product_id":"efmcpbm","title":"ECS-FM Cryogenic Planetary Ball Mill (-20°C, 900 rpm, 4*500 mL), EFMCPBM","description":"\u003cp\u003eA Cryogenic Planetary Ball Mill (also known as a Cryo-Mill) is a specialized tool used to process materials that are either heat-sensitive, prone to oxidation, or too \"rubbery\" to grind at room temperature.\u003c\/p\u003e\n\u003cp\u003eIn a high-speed planetary mill, the friction between the balls and the jar can easily push internal temperatures above 100°C. For certain battery components, this is destructive: (1) \u003cstrong\u003ePolymer Electrolytes \u0026amp; Binders\u003c\/strong\u003e: Materials like PEO or specialized ionomers become \"gummy\" when heated. At cryogenic temperatures (below -100°C), they reach their \"glass transition temperature\" (Tg) and become brittle, allowing them to be pulverized into fine powders forDry Battery Electrode (DBE) process. (2) \u003cstrong\u003ePreventing Thermal Degradation\u003c\/strong\u003e: High-energy milling can cause \"phase transitions\" in active materials. Cryo-milling preserves the original crystalline structure of sensitive cathodes or Solid Oxide precursors. (3) \u003cstrong\u003eControlling Reactivity\u003c\/strong\u003e: For high-surface-area materials like nano-silicon, the cold environment slows down oxidation during the milling process.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMCPBM (EFM-CPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or AC220V±10%, single phase, 50\/60Hz, 2000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e900 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCryogenic Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe minimum low temperature is down to -20°C\u003c\/li\u003e\n\u003cli\u003eRefrigerating Capacity: 1800 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e             \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL600 * W670 * H880 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~128 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsaem.0c02209\"\u003eQ. Yan, et al., Cryogenic Milling Method to Fabricate Nanostructured Anodes, ACS Appl. Energy Mater. 2020, 3, 11, 11285–11292\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2213343721009945\"\u003eJ. Liu, et al., Efficient liberation of electrode materials in spent lithium-ion batteries using a cryogenic ball mill, Journal of Environmental Chemical Engineering, 2021, 9, 106017\u003c\/a\u003e. \u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539306430694,"sku":"EFMCPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMCPBM_main.png?v=1776194074"},{"product_id":"efmwscpbm","title":"ECS-FM Water-Spray Cooling Planetary Ball Mill (900 rpm, 4*500 mL), EFMWSCPBM","description":"\u003cp\u003eIn high-energy milling, especially at speeds reaching 1100–2200 RPM, the friction between the grinding media and the jar walls converts nearly all mechanical energy into heat. A Water-Spray Cooling Planetary Ball Mill is a specialized design that uses an atomized water mist or direct spray within the grinding chamber to manage these extreme thermal loads.\u003c\/p\u003e\n\u003cp\u003eUnlike \"jacketed jars\" (which require complex rotary unions for water flow), the spray cooling system treats the entire grinding chamber as a heat exchanger. (1) \u003cstrong\u003eAtomization\u003c\/strong\u003e: Nozzles located inside the mill's lid or side walls spray a fine mist of chilled water directly onto the rotating jars. (2) \u003cstrong\u003eEvaporative Cooling\u003c\/strong\u003e: As the mist hits the hot surface of the Zirconia or Stainless Steel jars, it absorbs heat and evaporates, rapidly lowering the surface temperature. (3) \u003cstrong\u003eDrainage \u0026amp; Recirculation\u003c\/strong\u003e: The water is collected at the bottom of the chamber, filtered, and sent back to your small industrial water chiller to be recooled.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMWSCPBM (EFM-WSCPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or AC220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e900 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eWater Spray Cooling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThere is a water spray nozzle installed on the \"wall\".\u003c\/li\u003e\n\u003cli\u003eSpray water will quickly take away the generated heats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMWSCPBM_02_100x100.png?v=1776195898\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Milling Jars\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/efmamj500?variant=47534771077350\"\u003eEFMAMJ500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-SS304_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Nylon_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-PTFE_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-ZrO2_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-WC_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAMJ500-Agate_100x100.png?v=1776066642\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavmj250?variant=47534833139942\"\u003eEFMAVMJ250\u003c\/a\u003e  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-SS304_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Nylon_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-PTFE_100x100.png?v=1776067691\"\u003e\u003c\/p\u003e\n\u003cp\u003e             \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-ZrO2_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-WC_100x100.png?v=1776067691\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVMJ250-Agate_100x100.png?v=1776067692\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL600 * W540 * H880 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~118 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsaem.0c02209\"\u003eQ. Yan, et al., Cryogenic Milling Method to Fabricate Nanostructured Anodes, ACS Appl. Energy Mater. 2020, 3, 11, 11285–11292\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2213343721009945\"\u003eJ. Liu, et al., Efficient liberation of electrode materials in spent lithium-ion batteries using a cryogenic ball mill, Journal of Environmental Chemical Engineering, 2021, 9, 106017\u003c\/a\u003e. \u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539335692518,"sku":"EFMWSCPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMWSCPBM_main.png?v=1776195898"},{"product_id":"efel3dhepbm","title":"ECS-FEL Three-Dimensional (3D) High-Energy Planetary Ball Mill (650 rpm, 4 × 3L), EFEL3DHEPBM","description":"\u003cp\u003eA three-dimensional (3D) high-energy planetary ball mill represents the most advanced evolution of milling technology for battery R\u0026amp;D. While traditional planetary mills operate on a single plane (vertical or horizontal), the 3D version introduces a secondary tilting or \"swing\" motion.\u003c\/p\u003e\n\u003cp\u003eIn a standard planetary mill, centrifugal force eventually causes material to \"cake\" at the bottom or the outer wall of the jar. The 3D mill prevents this through a complex kinematic path: (1) \u003cstrong\u003eSun Wheel Rotation\u003c\/strong\u003e: The primary planetary motion providing high-energy impact. (2) \u003cstrong\u003eJar Counter-Rotation\u003c\/strong\u003e: Provides the shear force for fine grinding. (3) \u003cstrong\u003e3D Swing\/Tilt\u003c\/strong\u003e: The entire grinding station undergoes a rhythmic tilting motion (often referred to as a \"3D vibration\" or \"oscillating\" path).\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFEL3DHEPBM (EFEL-3DHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlanetary rotation + flip to realize 360° rotation\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar rotation speed (rotation): \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 650 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlanetary plate flipping rate: 3-10 rpm\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 3L\/each (2 or 4 for operation balance). The maximum processing capacity is 12 L. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, Zirconia, Tungsten Carbide (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efelamj3000?variant=47539455262950\"\u003eEFELAMJ3000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-SS304_100x100.png?v=1776201842\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-Nylon_100x100.png?v=1776201842\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-ZrO2_100x100.png?v=1776201842\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFELAMJ3000-WC_100x100.png?v=1776201842\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1120 * W685 * H780 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~282 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539377799398,"sku":"EFEL3DHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFEL3DHEPBM_main.png?v=1776210346"},{"product_id":"ecmasrhepbm","title":"ECS-CM Adjustable Speed-Ratio High-Energy Planetary Ball Mill (1600 rpm, 4*500 mL), ECMASRHEPBM","description":"\u003cp\u003eAn Adjustable Speed-Ratio High-Energy Planetary Ball Mill represents the most advanced evolution of planetary milling. While standard planetary mills have a fixed gear ratio (usually 1:-2, meaning the sun wheel and jars rotate in a fixed proportion), an adjustable ratio mill allows you to decouple these speeds.\u003c\/p\u003e\n\u003cp\u003eIn a planetary mill, the jars are mounted on a \"sun wheel.\" The jars rotate around the sun wheel's axis while simultaneously spinning on their own axes in the opposite direction. (1) \u003cstrong\u003eRevolution (Sun Wheel)\u003c\/strong\u003e: Generates centrifugal force that pins the media to the wall. (2) \u003cstrong\u003eRotation (Jar)\u003c\/strong\u003e: Generates the force that causes the media to detach and fly across the jar. (3) \u003cstrong\u003eThe \"Adjustable\" Advantage\u003c\/strong\u003e: By changing the speed ratio (e.g., from 1:-2 to 1:-3.5), you can alter the trajectory of the grinding balls. High Ratio: Increases impact energy (better for fracturing hard crystals). Low Ratio: Increases friction\/shear (better for surface activation and coating conductive carbon onto active materials).\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eECMASRHEPBM (ECM-ASRHEPBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 4000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMilling\/Mixing\/Grinding\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMilling jar self-rotation speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e1200 rpm\u003c\/span\u003e (adjustable). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSun-wheel revolution speed: Max. \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e400 pm\u003c\/span\u003e (adjustable)\u003c\/li\u003e\n\u003cli\u003eCentrifugal force: 136 g\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003cli\u003eThe cooling function (-10°C) with semiconductor refrigerant module can be supplied upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 500 mL\/each (2 or 4 for operation balance). The maximum processing capacity is 2000 mL. Other milling jar volumes, such as 100 mL, 250 mL, are also available upon request. \u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Polyurethane, Zirconia, Alumina, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling Jars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003cli\u003eThe real milling effects depends on the intrinsic properties of feeding materials, milling ball, milling time, and others. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~245 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0167273824000766\"\u003eJ. Gunamony, et al., Influence of mixing technique on properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte prepared by the solid-state reaction - A comparison of dry 3D mixing technique with wet ball-milling, Solid State Ionics, 2024, 410, 116528\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0921883123000675\"\u003eM. Hofer, et al., Effective mechanochemical synthesis of sulfide solid electrolyte Li3PS4 in a high energy ball mill by process investigation, Advanced Powder Technology, 2023, 34, 104004\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2023\/ee\/d3ee00249g\"\u003eL. L. Driscoll, et al., Under pressure: offering fundamental insight into structural changes on ball milling battery materials, Energy Environ. Sci., 2023,16, 5196-5209\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eC\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591014005002\"\u003e. Wall, et al., Production of nanocrystalline lithium fluoride by planetary ball-milling, Powder Technology, 2014, 264, 409-417.\u003c\/a\u003e \u003c\/p\u003e","brand":"CSKJ","offers":[{"title":"Default Title","offer_id":47547499118822,"sku":"ECMASRHEPBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ECMASRHEPBM_main.png?v=1776445181"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/EFMMHEPBM_main_62e971f9-67fb-4ca4-ae5a-36f79930c4de.png?v=1776231638","url":"https:\/\/echemsupplies.com\/collections\/planetary-ball-mills.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}