{"title":"Pouch Cells Equipment","description":"\u003cp\u003e\u003cstrong\u003ePouch cells live or die at assembly — every fold, seal, and weld locks in the cycle life you will measure months later.\u003c\/strong\u003e This collection covers the bench-scale machines that take you from cut electrodes and separator web through stacking, tab welding, packaging, electrolyte sealing, and formation. The lineup is sized for laboratory and pilot-line workflows, not gigafactory throughput, so footprint, dry-room compatibility, and recipe repeatability are prioritized over raw cycle time.\u003c\/p\u003e\n\n\u003cp\u003eThe equipment is grouped by the order of operations on a typical pouch line:\u003c\/p\u003e\n\n\u003ch3\u003eElectrode and foil preparation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRoll-to-roll slitters divide a wide coated mother roll into narrower strips using shear (circular knife) cutting, the cleanest method for Cu and Al current collectors and standard cathode\/anode coatings.\u003c\/li\u003e\n  \u003cli\u003eRoll-to-sheet cutters convert continuous coated rolls or bare foil into single sheets at fixed dimensions, with synchronized unwind, traction, and cut-to-length stages to suppress burrs and edge waves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCell forming, stacking, and welding\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePneumatic pouch forming machines punch the cup or pit into aluminum laminated film (ALF) at adjustable pressure — the standard choice for dry rooms and gloveboxes thanks to the clean, maintenance-light pneumatic drive.\u003c\/li\u003e\n  \u003cli\u003eZ-fold automatic stackers index pre-cut cathode and anode sheets into a continuous separator web from a tension-controlled roll, producing aligned multilayer stacks for high-energy prototypes.\u003c\/li\u003e\n  \u003cli\u003eUltrasonic metal welders bond Al and Cu tabs to the multilayer foil stacks; touch-screen controllers store layer-count recipes so welds remain consistent across operators.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSealing, electrolyte, and formation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat sealers create the top (tab) and side hermetic seals on the ALF by melting the inner polypropylene layer at controlled temperature, pressure, and dwell time.\u003c\/li\u003e\n  \u003cli\u003eMultifunctional vacuum sealers handle the post-electrolyte-injection seal, with vacuum-standing time for separator wetting and adjustable pump-down rates to prevent electrolyte boil-out.\u003c\/li\u003e\n  \u003cli\u003eHeat press formation fixtures apply simultaneous temperature and uniaxial pressure during the first charge to drive uniform SEI growth and suppress gas pockets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are bringing up a new pouch line, start with the forming and stacking machines that match your target footprint, then size the sealers and welders to the same cell envelope. For cylindrical or coin formats, see the sibling collections under \u003ca href=\"\/collections\/battery-equipment\"\u003eBattery Equipment\u003c\/a\u003e; for cell-internal materials, see \u003ca href=\"\/collections\/cathodes\"\u003eCathodes\u003c\/a\u003e, \u003ca href=\"\/collections\/anodes\"\u003eAnodes\u003c\/a\u003e, and \u003ca href=\"\/collections\/separators\"\u003eSeparators\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"esspcpesc","title":"ECS-SS Pneumatic Electrode Sheet Cutter (L120mm x W80mm) for Pouch Cells, ESSPCPESC","description":"\u003cp\u003eFor high-throughput pouch cell production, a pneumatic pouch cell cutter (also known as a pneumatic die cutting machine) is used to precisely cut the rectangular shapes from coated electrode sheets. Unlike coin cell cutters, which use simple circular dies, pouch cell cutters must handle larger areas and provide specific tabs for current collection.\u003c\/p\u003e\n\u003cp\u003eThe key features of pneumatic pouch cell cutter are: (1) \u003cstrong\u003ePrecision Die Sets\u003c\/strong\u003e: These machines use specialized \"male-female\" die sets made of hardened tungsten steel or Cr12MoV. This ensures the edges are burr-free (\u0026lt;15 um), which is critical to prevent internal short circuits in stacked or folded pouch cells. (2) \u003cstrong\u003ePneumatic Actuation\u003c\/strong\u003e: By using compressed air (typically 0.5–0.8 MPa), the cutter provides a consistent, high-velocity vertical force that is far superior to manual lever-arm cutters for repeatability. (3) \u003cstrong\u003eSafety Interlocks\u003c\/strong\u003e: Most professional units feature a light curtain or a dual-button start system to ensure the operator's hands are clear of the cutting zone. (4) \u003cstrong\u003eGlovebox Compatibility\u003c\/strong\u003e: Many models are designed with a compact footprint to be placed inside an argon-filled glovebox for cutting moisture-sensitive anodes or specialized solid-state electrolytes.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCPESC (ESS-PC-PESC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Force\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 1 T (for electrode cutting, 500 kg force is recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003cli\u003eVertical Bur: ≤12μm, Horizontal Bur: ≤20μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_02_100x100.png?v=1774909824\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard cutting dies: 58mm*45mm for anode, and 56mm*43mm for cathode.\u003c\/li\u003e\n\u003cli\u003eFor any customization, please indicate the following parameters: \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_160x160.png?v=1774910247\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) or a gas tank is required to provide 60-80 psi to support the pneumatic operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL370 * W245 * H245 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~38 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47496420557030,"sku":"ESSPCPESC","price":3299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSCCHTPDEC_main.png?v=1774907072"},{"product_id":"ersefmp","title":"ECS-RS Mechanical Pipette for Electrolyte Filling, ERSEFMP","description":"\u003cp\u003eFor precise electrolyte filling in battery research, the choice of pipetting tool depends on the viscosity of your electrolyte (e.g., standard LiPF6 in carbonates vs. thick ionic liquids) and whether you are working inside an argon-filled glovebox. Because electrolytes are often corrosive, volatile, and sensitive to moisture, standard laboratory pipettes require specific configurations to maintain accuracy and tool longevity.\u003c\/p\u003e\n\u003ctable style=\"width: 49.5\u0026lt;p\u0026gt;For precise electrolyte filling in battery research, the choice of pipetting tool depends on the viscosity of your electrolyte (e.g., standard LiPF6 in carbonates vs. thick ionic liquids) and whether you are working inside an argon-filled glovebox. Because electrolytes are often corrosive, volatile, and sensitive to moisture, standard laboratory pipettes require specific configurations to maintain accuracy and tool longevity.\u0026lt;\/p\u0026gt;\u0026lt;table style=;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117.637px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 675.363px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSEFMP (ERS-EF-MP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117.637px;\"\u003e\u003cem\u003ePipette Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 675.363px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.1 uL to 10 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 117.637px;\"\u003e\u003cem\u003ePipette Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 675.363px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.1-2.5 uL\u003c\/li\u003e\n\u003cli\u003e0.5-10 uL\u003c\/li\u003e\n\u003cli\u003e2-20 uL\u003c\/li\u003e\n\u003cli\u003e5-50 uL\u003c\/li\u003e\n\u003cli\u003e10-100 uL\u003c\/li\u003e\n\u003cli\u003e20-200 uL\u003c\/li\u003e\n\u003cli\u003e50-200 uL\u003c\/li\u003e\n\u003cli\u003e100-1000 uL\u003c\/li\u003e\n\u003cli\u003e200-1000 uL\u003c\/li\u003e\n\u003cli\u003e1000-5000 uL\u003c\/li\u003e\n\u003cli\u003e2-10 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePipette Parameters\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSEFMP_02_480x480.png?v=1775091183\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.0121910jes\/meta\"\u003eF. J. Günter, et al., Influence of the Electrolyte Quantity on Lithium-Ion Cells, J. Electrochem. Soc., 2019, 166, A1709\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.1171902jes\/meta\"\u003eV. Murray, et al., A Guide to Full Coin Cell Making for Academic Researchers, J. Electrochem. Soc., 2019, 166, A329\u003c\/a\u003e.\u003c\/p\u003e","brand":"RSC","offers":[{"title":"0.1-2.5 uL","offer_id":47503622635750,"sku":"ERSEFMP01","price":99.0,"currency_code":"USD","in_stock":true},{"title":"0.5-10 uL","offer_id":47503622668518,"sku":"ERSEFMP02","price":99.0,"currency_code":"USD","in_stock":true},{"title":"2-20 uL","offer_id":47503622701286,"sku":"ERSEFMP03","price":99.0,"currency_code":"USD","in_stock":true},{"title":"5-50 uL","offer_id":47503622734054,"sku":"ERSEFMP04","price":99.0,"currency_code":"USD","in_stock":true},{"title":"10-100 uL","offer_id":47503622766822,"sku":"ERSEFMP05","price":99.0,"currency_code":"USD","in_stock":true},{"title":"20-200 uL","offer_id":47503622799590,"sku":"ERSEFMP06","price":99.0,"currency_code":"USD","in_stock":true},{"title":"50-200 uL","offer_id":47503622832358,"sku":"ERSEFMP07","price":99.0,"currency_code":"USD","in_stock":true},{"title":"100-1000 uL","offer_id":47503622865126,"sku":"ERSEFMP08","price":99.0,"currency_code":"USD","in_stock":true},{"title":"200-1000 uL","offer_id":47503622897894,"sku":"ERSEFMP09","price":99.0,"currency_code":"USD","in_stock":true},{"title":"1000-5000 uL","offer_id":47503622930662,"sku":"ERSEFMP10","price":99.0,"currency_code":"USD","in_stock":true},{"title":"2-10 mL","offer_id":47503622963430,"sku":"ERSEFMP11","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSEFMP_main.png?v=1775090574"},{"product_id":"esefepds","title":"ECS-S Electronic Pipette with Digital Screen for Electrolyte Filling, ESEFEPDS","description":"\u003cp\u003eFor precise electrolyte filling in battery research, the choice of pipetting tool depends on the viscosity of your electrolyte (e.g., standard LiPF6 in carbonates vs. thick ionic liquids) and whether you are working inside an argon-filled glovebox. Because electrolytes are often corrosive, volatile, and sensitive to moisture, standard laboratory pipettes require specific configurations to maintain accuracy and tool longevity.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESEFEPDS (ES-EF-EPDS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMagnetic charging (USB cable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_03_100x100.png?v=1775103895\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_04_160x160.png?v=1775104103\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePipette Volume\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5 uL to 1 mL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePipette Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-10 uL\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10-200 uL\u003c\/li\u003e\n\u003cli\u003e30-300 uL\u003c\/li\u003e\n\u003cli\u003e50-1000 uL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eOperation Mode\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSample Transfer Mode (P-H)\u003c\/li\u003e\n\u003cli\u003eSample Homogenize Mode (P-Y)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDigital Screen \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_02_100x100.png?v=1775103821\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePipette Parameters\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_05_480x480.png?v=1775104856\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.0121910jes\/meta\"\u003eF. J. Günter, et al., Influence of the Electrolyte Quantity on Lithium-Ion Cells, J. Electrochem. Soc., 2019, 166, A1709\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/2.1171902jes\/meta\"\u003eV. Murray, et al., A Guide to Full Coin Cell Making for Academic Researchers, J. Electrochem. Soc., 2019, 166, A329\u003c\/a\u003e.\u003c\/p\u003e","brand":"MKSYS","offers":[{"title":"0.1-2.5 uL","offer_id":47505527275750,"sku":"ESEFEPDS01","price":199.0,"currency_code":"USD","in_stock":true},{"title":"10-200 uL","offer_id":47505527308518,"sku":"ESEFEPDS02","price":199.0,"currency_code":"USD","in_stock":true},{"title":"30-300 uL","offer_id":47505527341286,"sku":"ESEFEPDS03","price":199.0,"currency_code":"USD","in_stock":true},{"title":"50-1000 uL","offer_id":47505527374054,"sku":"ESEFEPDS04","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESEFEPDS_main.png?v=1775103629"},{"product_id":"esmpcpesc","title":"ECS-SM Pneumatic Electrode Sheet Cutter (L200mm x W200mm) for Pouch Cells, ESMPCPESC","description":"\u003cp\u003eFor high-throughput pouch cell production, a pneumatic pouch cell cutter (also known as a pneumatic die cutting machine) is used to precisely cut the rectangular shapes from coated electrode sheets. Unlike coin cell cutters, which use simple circular dies, pouch cell cutters must handle larger areas and provide specific tabs for current collection.\u003c\/p\u003e\n\u003cp\u003eThe key features of pneumatic pouch cell cutter are: (1) \u003cstrong\u003ePrecision Die Sets\u003c\/strong\u003e: These machines use specialized \"male-female\" die sets made of hardened tungsten steel or Cr12MoV. This ensures the edges are burr-free (\u0026lt;15 um), which is critical to prevent internal short circuits in stacked or folded pouch cells. (2) \u003cstrong\u003ePneumatic Actuation\u003c\/strong\u003e: By using compressed air (typically 0.5–0.8 MPa), the cutter provides a consistent, high-velocity vertical force that is far superior to manual lever-arm cutters for repeatability. (3) \u003cstrong\u003eSafety Interlocks\u003c\/strong\u003e: Most professional units feature a light curtain or a dual-button start system to ensure the operator's hands are clear of the cutting zone. (4) \u003cstrong\u003eGlovebox Compatibility\u003c\/strong\u003e: Many models are designed with a compact footprint to be placed inside an argon-filled glovebox for cutting moisture-sensitive anodes or specialized solid-state electrolytes.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMPCPESC (ESM-PC-PESC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 60 W\u003c\/li\u003e\n\u003cli\u003eA DC24V adaptor is included \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Force\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 3 T\u003c\/li\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) with 60-80 psi is required for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003cli\u003eVertical Bur: ≤12μm, Horizontal Bur: ≤20μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_02_100x100.png?v=1774909824\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard cutting dies: 58mm*45mm for anode, and 56mm*43mm for cathode.\u003c\/li\u003e\n\u003cli\u003eFor any customization, please indicate the following parameters:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_100x100.png?v=1774910247\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1-to-2 is normally recommended, but the maximum is 1-to-8 pieces. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCPESC_02_100x100.png?v=1775235254\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time. \u003c\/li\u003e\n\u003cli\u003eIf customer want to place the die cutter into glovebox for cutting H2O\/O2 sensitive materials, a glovebox-compatible version is available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCPESC_03_100x100.png?v=1775235766\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCPESC_04_100x100.png?v=1775236044\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL710 * W540 * H830 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~210 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47508899987686,"sku":"ESMPCPESC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCPESC_main.png?v=1775234751"},{"product_id":"eslpcpesc","title":"ECS-SL Pneumatic Electrode Sheet Cutter (L380mm x W250mm) for Pouch Cells, ESLPCPESC","description":"\u003cp\u003eFor high-throughput pouch cell production, a pneumatic pouch cell cutter (also known as a pneumatic die cutting machine) is used to precisely cut the rectangular shapes from coated electrode sheets. Unlike coin cell cutters, which use simple circular dies, pouch cell cutters must handle larger areas and provide specific tabs for current collection.\u003c\/p\u003e\n\u003cp\u003eThe key features of pneumatic pouch cell cutter are: (1) \u003cstrong\u003ePrecision Die Sets\u003c\/strong\u003e: These machines use specialized \"male-female\" die sets made of hardened tungsten steel or Cr12MoV. This ensures the edges are burr-free (\u0026lt;15 um), which is critical to prevent internal short circuits in stacked or folded pouch cells. (2) \u003cstrong\u003ePneumatic Actuation\u003c\/strong\u003e: By using compressed air (typically 0.5–0.8 MPa), the cutter provides a consistent, high-velocity vertical force that is far superior to manual lever-arm cutters for repeatability. (3) \u003cstrong\u003eSafety Interlocks\u003c\/strong\u003e: Most professional units feature a light curtain or a dual-button start system to ensure the operator's hands are clear of the cutting zone. (4) \u003cstrong\u003eGlovebox Compatibility\u003c\/strong\u003e: Many models are designed with a compact footprint to be placed inside an argon-filled glovebox for cutting moisture-sensitive anodes or specialized solid-state electrolytes.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLPCPESC (ESL-PC-PESC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 10 W \u003c\/li\u003e\n\u003cli\u003eA DC24V adaptor is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Force\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 5 T (adjustable)\u003c\/li\u003e\n\u003cli\u003eA gas compressor (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNot Included\u003c\/strong\u003e\u003c\/span\u003e) with 60-80 psi is required for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-0.5 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003cli\u003eVertical Bur: ≤12μm, Horizontal Bur: ≤20μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTraverse Distance\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eNo standard cutting die is included, customer should provide the electrode drawing for making the cutting die. \u003c\/li\u003e\n\u003cli\u003eFor any customization, please indicate the following parameters: \u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_100x100.png?v=1774910247\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e1-to-X is available upon request (we will evaluate the X numbers based on the individual electrode size)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eGas Compressor (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor pneumatic operation of the die cutter, a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSafety Feature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIR sensors were built-in for door safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time.    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL580 * W480 * H1120 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~299 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47508923220198,"sku":"ESLPCPESC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLPCPESC_main.png?v=1775237939"},{"product_id":"esspcbas","title":"ECS-SS Benchtop Automatic Stacker (L100mm x W90mm) for Pouch Cells, ESSPCBAS","description":"\u003cp\u003eFor pouch cell research, an automatic stacking machine is the most critical tool for transitioning from single-layer prototypes to multi-layer high-energy cells. These machines automate the precise \"Z-fold\" layering of cathodes, anodes, and separators, ensuring the alignment and tension required for high-performance electrochemical testing. The separator is supplied as a continuous web from a tension-controlled roll, while pre-cut anode and cathode sheets are inserted into the folds from opposite sides. This creates a compact, interconnected stack that is superior to simple manual layering.\u003c\/p\u003e\n\u003cp\u003eAs for the sheet-type solid-state electrolyte, a piece-by-piece stacking machine is able to continuously pick up the electrode and electrolyte to assemble a multiple-layer solid-state pouch cell.   \u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCBAS (ESS-PC-BAS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, 50\/60Hz, 400 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eAcceptable Electrode Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe standard stacking die size is L62mm*W46mm (anode: 58*45mm, cathode: 56*43mm, separator width is 60 mm)\u003c\/li\u003e\n\u003cli\u003eL: 40-110 mm, W 40-90 mm (tab is not included). Normally a max tab length is 15 mm\u003c\/li\u003e\n\u003cli\u003eAny customized electrodes are supposed to disclose the electrode\/tab size and layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_100x100.png?v=1774910247\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eStacking Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStacking Mode: Regular \u003cstrong\u003eZ-fold\u003c\/strong\u003e or \u003cstrong\u003eLayer-by-Layer stacking\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e           \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_02_100x100.png?v=1775241692\"\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_03_100x100.png?v=1775241692\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor hybrid Z-folding and layer-by-layer pouch cell stacker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_06_160x160.png?v=1775244610\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. stacking layers: 100\u003c\/li\u003e\n\u003cli\u003eMax. stacking cell thickness: 15 mm\u003c\/li\u003e\n\u003cli\u003eStacking alignment accuracy: ±0.3 mm\u003c\/li\u003e\n\u003cli\u003eStacking Speed: 4-6 s\/layer\u003c\/li\u003e\n\u003cli\u003eA vacuum pump is built-in for sucking electrodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLoading Separator Roll\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCardboard core size: 3\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. Roll diameter: 250 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSafety Feature (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn acrylic frame cover \u0026amp; door can be customized to improve operation safety.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen the stacker is placed inside a dryroom or regular room, a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank with second-stage regulator is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.   \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL790 * W610 * H720 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~120 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0007850612001035\"\u003eJ. Kurfer, et al., Production of large-area lithium-ion cells – Preconditioning, cell stacking and quality assurance, CIRP Annals, 2012, 61, 1-4\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2017\/sc\/c8ee00546j\/unauth\"\u003eB. Evanko, et al., Stackable bipolar pouch cells with corrosion-resistant current collectors enable high-power aqueous electrochemical energy storage, Energy Environ. Sci., 2018,11, 2865-2875\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Regular Z-fold","offer_id":47509287141606,"sku":"ESSPCBASZ","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Hybrid Z-fold + Layer-by-Layer","offer_id":47509287174374,"sku":"ESSPCBASH","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_main.png?v=1775244469"},{"product_id":"esmhas","title":"ECS-SM Hybrid Automatic Stacker (L200mm x W150mm) for Pouch Cells, ESMHAS","description":"\u003cp\u003eFor pouch cell research, an automatic stacking machine is the most critical tool for transitioning from single-layer prototypes to multi-layer high-energy cells. These machines automate the precise \"Z-fold\" layering of cathodes, anodes, and separators, ensuring the alignment and tension required for high-performance electrochemical testing. The separator is supplied as a continuous web from a tension-controlled roll, while pre-cut anode and cathode sheets are inserted into the folds from opposite sides. This creates a compact, interconnected stack that is superior to simple manual layering.\u003c\/p\u003e\n\u003cp\u003eAs for the sheet-type solid-state electrolyte, a piece-by-piece stacking machine is able to continuously pick up the electrode and electrolyte to assemble a multiple-layer solid-state pouch cell.   \u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMHAS (ESM-HAS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, 50\/60Hz, 400 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eAcceptable Electrode Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 100-200 mm, W 50-150 mm (tab is not counted). Normally a max tab length is 15 mm\u003c\/li\u003e\n\u003cli\u003eAny customized electrodes are supposed to disclose the electrode\/tab size and layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPESC_03_100x100.png?v=1774910247\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eStacking Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStacking Mode: Regular \u003cstrong\u003eZ-fold\u003c\/strong\u003e or \u003cstrong\u003eLayer-by-Layer stacking\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e           \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_02_100x100.png?v=1775241692\"\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCBAS_03_100x100.png?v=1775241692\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor hybrid Z-folding and layer-by-layer pouch cell stacker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMHAS_02_160x160.png?v=1775251380\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. stacking layers: ~200\u003c\/li\u003e\n\u003cli\u003eMax. stacking cell thickness: 15 mm\u003c\/li\u003e\n\u003cli\u003eStacking alignment accuracy: ±0.3 mm\u003c\/li\u003e\n\u003cli\u003eStacking Speed: 4-6 s\/layer\u003c\/li\u003e\n\u003cli\u003eA vacuum pump is built-in for sucking electrodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLoading Separator Roll\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCardboard core size: 3\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. Roll diameter: 250 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSafety Feature (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn acrylic frame cover \u0026amp; door can be customized to improve operation safety.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.   \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1220 * W610 * H720 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~180 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0007850612001035\"\u003eJ. Kurfer, et al., Production of large-area lithium-ion cells – Preconditioning, cell stacking and quality assurance, CIRP Annals, 2012, 61, 1-4\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlelanding\/2017\/sc\/c8ee00546j\/unauth\"\u003eB. Evanko, et al., Stackable bipolar pouch cells with corrosion-resistant current collectors enable high-power aqueous electrochemical energy storage, Energy Environ. Sci., 2018,11, 2865-2875\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47509310996710,"sku":"ESMHAS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMHAS_main.png?v=1775252011"},{"product_id":"espcuwtsc","title":"ECS-S Ultrasonic Welder (800-6000W) with Touch Screen Controller for Pouch Cells, ESPCUWTSC","description":"\u003cp\u003eFor high-precision pouch cell assembly, an ultrasonic metal welder with a PLC touch screen controller is the standard for welding the current collector tabs (Al and Cu) to the multi-layer electrode stacks. Unlike manual or basic models, a touch screen interface allows you to program and save specific \"recipes\" for different layer counts, ensuring consistent bond strength without tearing the fragile foils.\u003c\/p\u003e\n\u003cp\u003eThe advantage of the touch screen controller: (1) \u003cstrong\u003eRecipe Management\u003c\/strong\u003e: The specific parameters can be saved for \"10-layer NMC\" or \"20-layer LFP,\" allowing different researchers to achieve identical weld quality. (2) \u003cstrong\u003eQuality Monitoring\u003c\/strong\u003e: The screen displays the welding curve (Power vs. Time). A sudden spike or dip can indicate a misaligned tab or a dirty welding horn. (3) \u003cstrong\u003eSelf-Diagnostics\u003c\/strong\u003e: Modern controllers will alert you if the air pressure is too low or if the ultrasonic transducer is overheating, preventing damage to the equipment.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESPCUWTSC800 (ES-PC-UWTSC800)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESPCUWTSC3000 (ES-PC-UWTSC3000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESPCUWTSC6000 (ES-PC-UWTSC6000)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 800 W\u003c\/li\u003e\n\u003cli\u003eAC110V and AC220V can be switched in control box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single-phase, 50\/60Hz, 3000 W\u003c\/li\u003e\n\u003cli\u003eAC110V and AC220V can be switched in control box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC380V±10%, three phases, 50\/60Hz, 6000 W\u003c\/li\u003e\n\u003cli\u003e(AC220V±10%, three phases can be customized upon request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eWelding Heads\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Head Shape: Cross, single-point\u003c\/li\u003e\n\u003cli\u003eWelding Area: 3*6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESPCUWTSC_02_100x100.png?v=1775257476\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA customized welding head with various shapes and area can be supplied upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Head Shape: Axe-type, two-sides\u003c\/li\u003e\n\u003cli\u003eWelding Area: 4*8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESPCUWTSC_03_100x100.png?v=1775258226\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA customized welding head with various shapes and area can be supplied upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Head Shape: Axe-type, two-sides\u003c\/li\u003e\n\u003cli\u003eWelding Area: 4*12 mm\u003c\/li\u003e\n\u003cli\u003eA customized welding head with various shapes and area can be supplied upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003eWelding Power\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50-800W (0-100% Amplitude)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50-3000W (0-100% Amplitude)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e50-6000W (0-100% Amplitude)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eWelding Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026lt;0.4 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026lt;0.4 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026lt;1.0 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eWelding Layers\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 20 layers (0.1 mm Al tab with 16 um Al foil or 0.1 mm Ni tab with 9 um Cu foil)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 40 layers (0.1 mm Al tab with 16 um Al foil or 0.1 mm Ni tab with 9 um Cu foil)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 70 layers (0.1 mm Al tab with 16 um Al foil or 0.1 mm Ni tab with 9 um Cu foil)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eGas Pressure Source\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough was included for glovebox operation (sensitive electrodes or solid-state electrolyte). In this case, an Ar gas tank is supposed to be placed outside through the feedthrough for provide pneumatic gas pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Part: L570 * W320 * H300 mm\u003c\/li\u003e\n\u003cli\u003eController: L530 * W200 * H380 mm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Part: L570 * W320 * H300 mm\u003c\/li\u003e\n\u003cli\u003eController: L530 * W200 * H380 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eWelding Part: L570 * W320 * H300 mm\u003c\/li\u003e\n\u003cli\u003eController: L570 * W40 * H500 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 9%;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~53 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 26.8075%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~58 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 25.1925%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~60 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2352152X15000055\"\u003eM. J. Brand , et al., Welding techniques for battery cells and resulting electrical contact resistances, Journal of Energy Storage, 2015, 1, 7-14\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.e-jwj.org\/journal\/view.php?doi=10.5781\/JWJ.2023.41.6.6\"\u003eM. Kim, et al., Review on Ultrasonic and Laser Welding Technologies of Multi-Layer Thin Foils for the Lithium-Ion Pouch Cell Manufacturing, Journal of Welding and Joining 2023; 41(6): 462-474\u003c\/a\u003e..\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"800 W","offer_id":47510124724454,"sku":"ESPCUWTSC800","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"3000 W","offer_id":47510124757222,"sku":"ESPCUWTSC3000","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"6000 W","offer_id":47510124789990,"sku":"ESPCUWTSC6000","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESPCUWTSC_main.png?v=1775254966"},{"product_id":"esspcppfm","title":"ECS-SS Pneumatic Pouch Forming Machine (L80mm x W65mm) for Pouch Cells, ESSPCPPFM","description":"\u003cp\u003eIn pouch cell fabrication, a pneumatic pouch forming machine is used to punch the \"cup\" or \"pit\" into Aluminum Laminated Film (ALF). This cup holds the electrode stack and electrolyte. Pneumatic models are the standard for laboratory R\u0026amp;D because they are cleaner, more compact, and require less maintenance than hydraulic systems, making them ideal for use inside a dry room or glovebox.\u003c\/p\u003e\n\u003cp\u003eThe distinct features of the pneumatic pouch forming machine: (1) \u003cstrong\u003eAdjustable Pressure\u003c\/strong\u003e: The pressure can be fine-tuned so it is high enough to form the cup but not so high that it shears the aluminum layer. (2) \u003cstrong\u003ePunching Speed\u003c\/strong\u003e: Pneumatic cylinders provide a fast, consistent stroke that often yields cleaner corners than slow manual lever punches. (3) \u003cstrong\u003eDie Quality\u003c\/strong\u003e: High-end suppliers use R-angle (rounded) corners on the punch to distribute stress during the drawing process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking Mechanism Diagram\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_02_240x240.png?v=1775335272\" alt=\"\"\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCPPFM (ESS-PC-PPFM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003ePunching Die Types\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dual-Holes, Fold, Air Bag, L40*W35mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_03_160x160.png?v=1775335913\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eA≤160mm, B≤125mm, C≤80mm, D≤65mm, E≤50mm, H≤6mm\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Single-Hole, Fold, Air Bag, L61*W47mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_04_160x160.png?v=1775335913\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eA≤160mm, B≤125mm, C≤61mm, D≤47mm, E≤50mm, H≤6mm\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Single-Hole, Four-Side Sealing, Air Bag, L80*W35mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_05_160x160.png?v=1775335913\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eA≤160mm, B≤125mm, C≤80mm, D≤35mm, E≤50mm, H≤6mm \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Single-Hole, Four-Side Sealing, No Air Bag, L80*W65mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_06_160x160.png?v=1775335913\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe standard punching die for making 46mm*62mm (single hole, fold, no air bag) is included for making 4662 pouch cell, which is matched with anode (58mm*45mm) and cathode (56mm*43mm). \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003ePunching Depth\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe punching depth can be adjustable by replacing blocking dies with various height. \u003c\/li\u003e\n\u003cli\u003eThere are standard blocking dies for making pouch cell case with depth of 3 mm, 4 mm, 5 mm, and 6 mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_07_160x160.png?v=1775338072\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOther customized blocking die set for depth of 1 mm, 2.5 mm, 3.5 mm, 4.5 mm, and 5.5 mm are also available here. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003ePouch Cell Case\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum laminated film for feeding material can be found here: \u003ca href=\"https:\/\/echemsupplies.com\/products\/cpccalfs?variant=47049435873510\"\u003eCPCCALFS\u003c\/a\u003e, \u003ca href=\"https:\/\/echemsupplies.com\/products\/cpccalfr?variant=47049067462886\"\u003eCPCCALFR\u003c\/a\u003e, \u003ca href=\"https:\/\/echemsupplies.com\/products\/cpccalfrdnp?variant=47049343893734\"\u003eCPCCALFRDNP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) or a gas tank is required to provide 80-110 psi to support the pneumatic operation. \u003c\/li\u003e\n\u003cli\u003eFor 5mm and 6mm punching depth, at least 95 psi is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting die plate should be tightly fixed on the cutter by rotating the top knob. \u003c\/li\u003e\n\u003cli\u003eThe acrylic plate should be placed at the bottom to avoid cutting blade damage\u003c\/li\u003e\n\u003cli\u003eThe electrode debris should be cleaned in time. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL370 * W245 * H236 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 12.8006%;\"\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 85.8635%;\"\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~45 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775325015824\"\u003eC. Moon, et al., Formability of PET\/PA\/Al\/PP laminated composite pouch for Li-ion battery: Analysis based on experiments and modeling,J. Power Sources, 2025, 653, 237746\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/link.springer.com\/article\/10.1007\/s12206-017-0519-0\"\u003eM. S. Yu, et al., Effect of film properties on formability of aluminum pouch for secondary battery, Journal of Mechanical Science and Technology, 2017, 31, 2759–2763\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47511338549478,"sku":"ESSPCPPFM","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCPPFM_main.png?v=1775334259"},{"product_id":"esmpctsshs","title":"ECS-SM Heat Sealer (Max. 190 mm) for Top\/Side Sealing of Pouch Cells, ESMPCTSSHS","description":"\u003cp\u003eFor laboratory pouch cell assembly, a heat sealer (also known as a compact pouch sealer) is used to create the final hermetic seals on the top and sides of the Aluminum Laminated Film (ALF). This process requires precise control over temperature, pressure, and sealing time to melt the internal polypropylene (PP) layer of the film without damaging the metal tabs or causing \"electrolyte leakage\" paths.\u003c\/p\u003e\n\u003cp\u003eTop Sealing (Tab Sealing): This is the critical failure point. The sealer must bond the ALF to the tab sealant (the small strip of plastic pre-attached to your Al\/Cu tabs). Always use a soft-face (silicone) bottom blade for top sealing to \"wrap\" the film around the square edges of the tabs.\u003c\/p\u003e\n\u003cp\u003eSide Sealing: Usually involves two layers of ALF (Polypropylene to Polypropylene). This is the easiest seal to achieve and can be done at a slightly lower temperature.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCTSSHS_02_240x240.png?v=1775340877\"\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMPCTSSHS (ESM-PCTSS-HS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 900 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Length: Max. 190 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 3.2 mm (customized width can be up to 8 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003c\/li\u003e\n\u003cli\u003eIf the stacking cell layers are over 50 layers (total tab thickness\u0026gt;5 mm, then the hard sealing with slotting should be adopted) \u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003c\/li\u003e\n\u003cli\u003eHeating duration is adjustable in 0-99 seconds.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCell Fixture\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cell fixture is designed to fix the pouch cell for stable sealing.\u003c\/li\u003e\n\u003cli\u003eThe bar inside the cell fixture can be adjustable to match with various pouch cell sizes. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCTSSHS_03_100x100.png?v=1775342189\" alt=\"\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor\u003cspan\u003e (\u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/EUQOFGC\"\u003eEUQOFGC\u003c\/a\u003e\u003cspan\u003e) \u003c\/span\u003eor a gas tank is required to provide 80-110 psi to support the pneumatic operation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL320 * W320 * H485 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~32 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions,J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47511645946086,"sku":"ESMPCTSSHS","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCTSSHS_main.png?v=1775358988"},{"product_id":"eslpctsshs","title":"ECS-SL Heat Sealer (Max. 370 mm) for Top\/Side Sealing of Pouch Cells, ESLPCTSSHS","description":"\u003cp\u003eFor laboratory pouch cell assembly, a heat sealer (also known as a compact pouch sealer) is used to create the final hermetic seals on the top and sides of the Aluminum Laminated Film (ALF). This process requires precise control over temperature, pressure, and sealing time to melt the internal polypropylene (PP) layer of the film without damaging the metal tabs or causing \"electrolyte leakage\" paths.\u003c\/p\u003e\n\u003cp\u003eTop Sealing (Tab Sealing): This is the critical failure point. The sealer must bond the ALF to the tab sealant (the small strip of plastic pre-attached to your Al\/Cu tabs). Always use a soft-face (silicone) bottom blade for top sealing to \"wrap\" the film around the square edges of the tabs.\u003c\/p\u003e\n\u003cp\u003eSide Sealing: Usually involves two layers of ALF (Polypropylene to Polypropylene). This is the easiest seal to achieve and can be done at a slightly lower temperature.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCTSSHS_02_240x240.png?v=1775340877\"\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLPCTSSHS (ESL-PCTSS-HS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 1200 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Length: Max. 370 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 6.0 mm (customized width can be up to 10 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003c\/li\u003e\n\u003cli\u003eIf the stacking cell layers are over 50 layers (total tab thickness\u0026gt;5 mm, then the hard sealing with slotting should be adopted) \u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003c\/li\u003e\n\u003cli\u003eHeating duration is adjustable in 0-99 seconds.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCell Fixture\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cell fixture is designed to fix the pouch cell for stable sealing.\u003c\/li\u003e\n\u003cli\u003eThe bar inside the cell fixture can be adjustable to match with various pouch cell sizes. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCTSSHS_03_100x100.png?v=1775342189\" alt=\"\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"EUQOFGC\"\u003eEUQOFGC\u003c\/a\u003e) or a gas tank is required to provide 80-110 psi to support the pneumatic operation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL550 * W350 * H530 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~90 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions, J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47511710302438,"sku":"ESLPCTSSHS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLPCTSSHS_main.png?v=1775363596"},{"product_id":"esspcmvs","title":"ECS-SS Multifunctional Vacuum Sealer (L100 * W100 mm) for Pouch Cells, ESSPCMVS","description":"\u003cp\u003eFor pouch cell fabrication, vacuum sealers are specialized pieces of equipment used after electrolyte injection to ensure an air-free environment and prevent leakage. The standard feature of vacuum sealer are shown below: (1) \u003cstrong\u003eVacuum Standing (Diffusion)\u003c\/strong\u003e: This feature allows the cell to sit under vacuum before sealing. This \"standing\" time is critical to force the electrolyte to thoroughly saturate (wet) the electrode pores and separator. (2) \u003cstrong\u003eAdjustable Pump-Down Rate\u003c\/strong\u003e: If the vacuum is pulled too quickly, the electrolyte can boil or be sucked out of the pouch (spillage). High-end units have electronic regulators to control this rate. (3) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: Look for units capable of reaching -95 kPa to -99 kPa (or ~10 Torr) to ensure no moisture or air pockets remain, which would otherwise cause swelling during cycling.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCMVS (ESS-PC-MVS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 800 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCMVS_02_160x160.png?v=1775367157\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Length: Max. 100 mm (Max. cell size: 100mm*100mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 4.0 mm (customized width can be up to 10 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Pressure: ~400 N (~0.04 L gas will be consumed for each sealing)\u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe multifunctional sealing includes top\/side sealing, vacuum standing, vacuum sealing, and gas purge (solid-state battery) functions. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Level for Standing\/Sealing: Max. -95 kPa\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum Standing Time: 0-900 s\u003c\/li\u003e\n\u003cli\u003eVacuum Standing\/Sealing Time: 0-90 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGlovebox Operation Compatibility\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough is included to connect the controller box (outside glovebox) with the sealer part (inside glovebox). \u003c\/li\u003e\n\u003cli\u003eThe mini sealer part is antechamber compatible, so transfer it in\/out won't break the glovebox atmosphere (low O2\/H2O). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is required to provide high vacuum for standing and sealing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor the vacuum sealer placed inside glovebox, an Ar gas tank (60-80 psi) is required to connect with sealer through KF40 feedthrough.\u003c\/li\u003e\n\u003cli\u003eWhen the vacuum sealer placed inside a dryroom, then a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) can be used. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealer: L400 * W330 * H290 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003cli\u003eController: L230 * W230 * H290 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~25 kg in total (~16 kg for sealer, 9 kg for controller)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions,J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47512184684774,"sku":"ESSPCMVS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCMVS_main.png?v=1775365135"},{"product_id":"esmpcmvs","title":"ECS-SM Multifunctional Vacuum Sealer (L180 * W160 mm) for Pouch Cells, ESMPCMVS","description":"\u003cp\u003eFor pouch cell fabrication, vacuum sealers are specialized pieces of equipment used after electrolyte injection to ensure an air-free environment and prevent leakage. The standard feature of vacuum sealer are shown below: (1) \u003cstrong\u003eVacuum Standing (Diffusion)\u003c\/strong\u003e: This feature allows the cell to sit under vacuum before sealing. This \"standing\" time is critical to force the electrolyte to thoroughly saturate (wet) the electrode pores and separator. (2) \u003cstrong\u003eAdjustable Pump-Down Rate\u003c\/strong\u003e: If the vacuum is pulled too quickly, the electrolyte can boil or be sucked out of the pouch (spillage). High-end units have electronic regulators to control this rate. (3) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: Look for units capable of reaching -95 kPa to -99 kPa (or ~10 Torr) to ensure no moisture or air pockets remain, which would otherwise cause swelling during cycling.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable style=\"height: 1032.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMPCMVS (ESM-PC-MVS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 700 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 263.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 263.2px;\"\u003e\n\u003cp\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 263.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Length: Max. 180 mm (Max. cell size: 180mm*160mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 4.0 mm (customized width can be up to 10 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Pressure: ~7 kgf\/cm2 (~100 psi) (~0.04 L gas will be consumed for each sealing)\u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe multifunctional sealing includes top\/side sealing, vacuum standing, vacuum sealing, and gas purge (solid-state battery) functions. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Level for Standing\/Sealing: Max. -95 kPa\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum Standing Time: 0-900 s\u003c\/li\u003e\n\u003cli\u003eVacuum Standing\/Sealing Time: 0-90 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eGlovebox Operation Compatibility\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough with gas tubing and power cable is included to connect the outside vacuum pump and gas pressure tank.\u003c\/li\u003e\n\u003cli\u003eThe medium-size vacuum sealer is glovebox compatible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 172.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 172.6px;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 172.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is required to provide high vacuum for standing and sealing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor the vacuum sealer placed inside glovebox, an Ar gas tank (60-80 psi) is required to connect with sealer through KF40 feedthrough.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhen the vacuum sealer is placed inside a dryroom, then a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL455 * W390 * H600 mm (glovebox-compatible)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~82 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions,J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47512299274470,"sku":"ESMPCMVS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMPCMVS_main.png?v=1775367892"},{"product_id":"eslpcmvs","title":"ECS-SL Multifunctional Vacuum Sealer (L330 * W330 mm) for Pouch Cells, ESLPCMVS","description":"\u003cp\u003eFor pouch cell fabrication, vacuum sealers are specialized pieces of equipment used after electrolyte injection to ensure an air-free environment and prevent leakage. The standard feature of vacuum sealer are shown below: (1) \u003cstrong\u003eVacuum Standing (Diffusion)\u003c\/strong\u003e: This feature allows the cell to sit under vacuum before sealing. This \"standing\" time is critical to force the electrolyte to thoroughly saturate (wet) the electrode pores and separator. (2) \u003cstrong\u003eAdjustable Pump-Down Rate\u003c\/strong\u003e: If the vacuum is pulled too quickly, the electrolyte can boil or be sucked out of the pouch (spillage). High-end units have electronic regulators to control this rate. (3) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: Look for units capable of reaching -95 kPa to -99 kPa (or ~10 Torr) to ensure no moisture or air pockets remain, which would otherwise cause swelling during cycling.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLPCMVS (ESL-PC-MVS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 1300 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\n\u003cp\u003e\u003cem\u003eSealing Features\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSealing Blade Length: 345 mm, Effective sealing width: 330 mm (Max. cell size: 330mm*330mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Width: 6.0 mm (customized width can be up to 15 mm)\u003c\/li\u003e\n\u003cli\u003eThe upper sealing blade is covered a soft rubber layer, that is designed for top side sealing on tab with polymer adhesive.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealing Pressure: ~140 kgf (~0.6 MPa) (~0.18 L gas will be consumed for each sealing)\u003c\/li\u003e\n\u003cli\u003eThe maximum heating temperature is 250°C. Normally the recommended sealing temperature for upper and bottom sealing blades is 200 and 180 °C. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe multifunctional sealing includes top\/side sealing, vacuum standing, vacuum sealing, and gas purge (solid-state battery) functions. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Level for Standing\/Sealing: Max. -95 kPa\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVacuum Standing Time: 0-900 s\u003c\/li\u003e\n\u003cli\u003eVacuum Standing\/Sealing Time: 0-90 s (the recommended vacuum sealing time is 4-5 s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGlovebox Operation Compatibility\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough with gas tubing and power cable is included to connect the outside vacuum pump and gas pressure tank.\u003c\/li\u003e\n\u003cli\u003eThe large-size vacuum sealer is glovebox compatible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is required to provide high vacuum for standing and sealing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor the vacuum sealer placed inside glovebox, an Ar gas tank (60-80 psi) is required to connect with sealer through KF40 feedthrough.\u003c\/li\u003e\n\u003cli\u003eWhen the vacuum sealer placed inside a dryroom, then a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) can be used. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL540 * W500 * H590 mm (glovebox-compatible)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~89 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324008437\"\u003eT. Zhang, et al., Performance degradation and sealing failure analysis of pouch lithium-ion batteries under multi-storage conditions,J. Power Sources, 2024, 613, 234891\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775324012795\"\u003eP. Wang, et al., Experimental study on thermal runaway venting behaviour of LiNi0.8Co0.1Mn0.1O2 pouch cell under different sealing edge directions, J. Power Sources, 2024, 621, 235327\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47512435228902,"sku":"ESLPCMVS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLPCMVS_main.png?v=1775371765"},{"product_id":"esspchpfm","title":"ECS-SS Heat Press Formation Machine (L120*W80 mm, Same-Side Tabs) for Pouch Cells, ESSPCHPFM","description":"\u003cp\u003ethe Heat Press Formation Machine (also known as a Hot Press Formation Fixture) is used during the most critical stage of the battery's \"birth\": the initial charging (Formation). Heat press formation applies simultaneous temperature and mechanical pressure to the cell face. This ensures the Solid Electrolyte Interphase (SEI) layer forms uniformly, which is the \"secret sauce\" for long cycle life and high safety.\u003c\/p\u003e\n\u003cp\u003eDuring the first charge, lithium ions react with the electrolyte to form the SEI layer on the anode. Using a heat press offers three distinct advantages: (1) \u003cstrong\u003eUniform SEI Formation\u003c\/strong\u003e: Pressure ensures the electrode layers are perfectly flat and in intimate contact, preventing \"islands\" of uneven SEI that can lead to lithium plating (dendrites). (2) \u003cstrong\u003eGas Management\u003c\/strong\u003e: Pressure forces the gases generated during the SEI reaction (like CO2, H2, and C2H4) into the \"gas bag\" or \"side pocket\" of the pouch, preventing bubbles from getting trapped between the electrode layers. (3)\u003cstrong\u003e Improved Wetting\u003c\/strong\u003e: The heat reduces the viscosity of the electrolyte, helping it penetrates deep into the nanopores of the electrodes.\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 1392.6px; width: 120.185%;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCHPFM8H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCHPFM16H \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCHPFM32H \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSPCHPFM64H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 106.4px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1000 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2000 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2500 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 3500 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 86.8px;\"\u003e\n\u003cp\u003e\u003cem\u003eWorking Pressure\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e20~1000kg, ±5kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e20~2000kg, ±5kg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e20~2000kg, ±5kg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e20~2000kg, ±5kg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 106.4px;\"\u003e\u003cem\u003eHeating Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-90 °C, ± 3 °C\u003c\/li\u003e\n\u003cli\u003eHeating Rate: 80°C in 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-90 °C, ± 3 °C\u003c\/li\u003e\n\u003cli\u003eHeating Rate: 80°C in 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-90 °C, ± 3 °C\u003c\/li\u003e\n\u003cli\u003eHeating Rate: 80°C in 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-90 °C, ± 3 °C\u003c\/li\u003e\n\u003cli\u003eHeating Rate: 80°C in 30 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 47.6px;\"\u003e\u003cem\u003eGas Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.25-0.8 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.25-0.8 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.25-0.8 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.25-0.8 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 126px;\"\u003e\u003cem\u003eAcceptable Pouch Cell Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 40-120mm, W: 40-80mm (\u003cspan\u003eTabs at the same side\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eMax. 8 cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e     \u003cimg height=\"70\" width=\"111\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_01-1_100x100.png?v=1775424140\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 40-120mm, W: 40-80mm (\u003cspan\u003eTabs at the same side\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eMax. 16 cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_02-1_160x160.png?v=1775424255\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 40-120mm, W: 40-80mm (\u003cspan\u003eTabs at the same side\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eMax. 32 cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: start;\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_03-1_100x100.png?v=1775424459\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL: 40-120mm, W: 40-80mm (\u003cspan\u003eTabs at the same side\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eMax. 64 cells\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_04-1_100x100.png?v=1775424459\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 357.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 357.6px;\"\u003e\u003cem\u003eBattery Analyzer (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 357.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA battery analyzer with 8 channels is required for synchronous operation.\u003c\/li\u003e\n\u003cli\u003eThe integration of battery analyzer with the heat press can be supplied upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 357.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTwo battery analyzers (16 channels in total) are required for synchronous operation.\u003c\/li\u003e\n\u003cli\u003eThe integration of battery analyzer with the heat press can be supplied upon request. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 357.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFour battery analyzers (32 channels in total) are required for synchronous operation.\u003c\/li\u003e\n\u003cli\u003eThe integration of battery analyzer with the heat press can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 357.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEight battery analyzers (64 channels in total) are required for synchronous operation.\u003c\/li\u003e\n\u003cli\u003eThe integration of battery analyzer with the heat press can be supplied upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 214.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 214.6px;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 214.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required for pneumatic operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 214.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 214.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 214.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 184.8px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 184.8px;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL860 * W600 * H600 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1150 * W600 * H700 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1650 * W700 * H1600 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1650 * W1200 * H600 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 12.7103%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.486%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~135 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~150 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 22.1308%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~250 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.5327%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~350 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201900118\"\u003eH. H. Heimes, et al., The Effects of Mechanical and Thermal Loads during Lithium-Ion Pouch Cell Formation and Their Impacts on Process Time, Energy Technology, 2020, 8, 1900118\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ab68d6\/meta\"\u003eC. Bommier, et al., Operando Acoustic Monitoring of SEI Formation and Long-Term Cycling in NMC\/SiGr Composite Pouch Cells, J. Electrochem. Soc., 2020, 167, 020517\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"8 Channels","offer_id":47513131745510,"sku":"ESSPCHPFM8H","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"16 Channels","offer_id":47513131778278,"sku":"ESSPCHPFM16H","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"32 Channels","offer_id":47513131811046,"sku":"ESSPCHPFM32H","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"64 Channels","offer_id":47513131843814,"sku":"ESSPCHPFM64H","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSPCHPFM_01.png?v=1775422356"},{"product_id":"esmr2sefc","title":"ECS-SM Roll-to-Sheet Electrode \u0026 Foil Cutter (W≤290 mm), ESMR2SEFC","description":"\u003cp\u003eA Roll-to-Sheet Electrode and Foil Cutter is a precision machine that automates the transition from continuous rolls of coated electrodes or raw metal foils into individual sheets of exact dimensions. In battery manufacturing and advanced R\u0026amp;D, this step is critical because any edge defects—such as burrs, waves, or metallic dust—can lead to internal short circuits or non-uniform current distribution in the final cell.\u003c\/p\u003e\n\u003cp\u003eThe machine typically consists of three synchronized systems: (1) \u003cstrong\u003eUnwinding Stand\u003c\/strong\u003e: Holds the roll of \"green\" tape (e.g., YSZ slurry on PET carrier) or metal foil. (2) \u003cstrong\u003eTraction \u0026amp; Feeding\u003c\/strong\u003e: Stepper or servo motors pull the material through the cutting zone. High-end benchtop units use rubber-coated rollers to prevent scratching delicate active layers like SPAN. (3) \u003cstrong\u003eCutting Action\u003c\/strong\u003e: Guillotine Blade: Moves vertically for a clean, perpendicular cut. Best for thicker ceramic green tapes.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMR2SEFC (ESM-R2SEFC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, 50\/60Hz, 500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCritical Cutting Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller Width=300mm, which determines the acceptable electrode \u0026amp; foil roll width is ≤290 mm (leave certain space for alignment)\u003c\/li\u003e\n\u003cli\u003eCutting Accuracy: ± 0.3 mm (bur≤0.012 mm)\u003c\/li\u003e\n\u003cli\u003eCutting Speed: Max. 3 m\/min\u003c\/li\u003e\n\u003cli\u003eControllable Tension: Max. 30 N\u003c\/li\u003e\n\u003cli\u003eLoading Roll Diameter: Max. 300 mm (the core diameter of roll is 3\")\u003c\/li\u003e\n\u003cli\u003eCutting Blade Material: WC blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to supply a 60-80 psi for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL950 * W670 * H570 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~140 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S1875389211002148\"\u003eM. Luetke, et al., A Comparative Study on Cutting Electrodes for Batteries with Lasers, Physics Procedia, 2011, 12, 286-291\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201900519\"\u003eT. Jansen, et al., Evaluation of the Separation Process for the Production of Electrode Sheets, Energy Technology, 2020, 8, 1900519\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47559441613030,"sku":"ESMR2SEFC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMR2SEFC_main.png?v=1776824548"},{"product_id":"esmhvefsm","title":"ECS-SM Hybrid Vacuum Electrolyte Filling \u0026 Sealing Machine for Pouch (180*180 mm) \u0026 Cylindrical Cells (18650-4680), ESMHVEFSM","description":"\u003cp\u003eVacuum electrolyte filling is a critical step in battery fabrication, ensuring the porous electrodes and separators are fully \"wetted.\" Without a vacuum, air pockets (dry spots) remain, leading to poor capacity, high internal resistance, and shortened cycle life. \u003c\/p\u003e\n\u003cp\u003eFor pouch cells, the machine often combines injection, vacuum standing, and sealing into one unit or a modular glovebox line. The cell is typically pre-sealed on three sides. Electrolyte is injected into the open side, and the cell is placed in a vacuum chamber. The vacuum pulls air out of the pouch, and when the vacuum is released, the external atmospheric pressure \"pushes\" the electrolyte into the electrode pores. The key features are: (1) \u003cstrong\u003eVacuum Standing\u003c\/strong\u003e: A chamber where the cell sits under vacuum to allow for degassing and diffusion. (2) Vacuum Sealing Specialized heat-sealing bars that operate inside the vacuum chamber to close the final side of the pouch.\u003c\/p\u003e\n\u003cp\u003eAs for the vacuum electrolyte filling in cylindrical cell, a nozzle creates a tight seal around the cell opening, pulls a vacuum directly from the cell interior, and then injects a precise volume of electrolyte\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 1196.4px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMHVEFSM (ESM-HVEFSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 10px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 10px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 1200 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 361.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 361.2px;\"\u003e\n\u003cp\u003e\u003cem\u003eElectrolyte Filling Features\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 361.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePouch Cell Sizes: Max. L180*W180*T12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCylindrical Cel Size: 18650, 21700, and 4680.\u003c\/li\u003e\n\u003cli\u003ePouch Sealing Blade Length: 190 mm (effective sealing length is 180 mm)\u003c\/li\u003e\n\u003cli\u003ePouch Sealing Width: 2-10 mm (standard value is 6 mm)\u003c\/li\u003e\n\u003cli\u003ePouch Sealing Thickness (tab area): 0-0.5 mm\u003c\/li\u003e\n\u003cli\u003eSealing Pressure: Max. 70 kgf (~0.6 MPa). The pneumatic force can be supplied by gas pressure from an Ar gas tank.  \u003c\/li\u003e\n\u003cli\u003eSealing Time: 0-99 s (5-6 s is recommended)\u003c\/li\u003e\n\u003cli\u003eVacuum Pressure: Max. -95 kPa (adjustable)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh precision peristaltic pump is used for electrolyte transfer and filling. Accuracy: 5 g (±1.5%); 50 g (±1%); 100 g (±0.8%). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectrolyte Filling Time: ~2-3 min (50g electrolyte as an example)\u003c\/li\u003e\n\u003cli\u003eElectrolyte Filling Needle: PTFE, O.D. 3mm, I.D. 2mm\u003c\/li\u003e\n\u003cli\u003eElectrolyte Transfer Tubing: BPT, O.D. 6.4 mm, I.D. 3.2 mm\u003c\/li\u003e\n\u003cli\u003ePeristaltic Pump Tubing: soft BPT, O.D. 5mm, I.D. 3 mm\u003c\/li\u003e\n\u003cli\u003eElectrolyte Buffer Tank: 150 mL (inside is PTFE layer) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eGlovebox Operation Compatibility\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough with gas\/vacuum tubing and power cable is included to connect the outside vacuum pump and gas pressure tank.\u003c\/li\u003e\n\u003cli\u003eThe electrolyte filling machine is glovebox compatible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 179.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 179.6px;\"\u003e\u003cem\u003eElectrolyte Filling Channels (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 179.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe customized electrolyte filling machine with multiple channels (to avoid cross-contamination) is available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMHVEFM_03_100x100.png?v=1777523173\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 183.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 183.6px;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 183.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is required to provide high vacuum for standing and sealing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\" width=\"80\" height=\"80\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor the vacuum electrolyte filling machine placed inside glovebox, an Ar gas tank (60-80 psi) is required to connect with electrolyte filling machine through KF40 feedthrough.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhen the electrolyte filling machine is placed inside a dryroom, then a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL550 * W480 * H650 mm (glovebox-compatible)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~76 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775316311995\"\u003eT. Knoche, et al., In situ visualization of the electrolyte solvent filling process by neutron radiography, J. Power Sources, 2016, 331, 267-276\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201801108\"\u003eF. J. Günter, et al., Influence of the Cell Format on the Electrolyte Filling Process of Lithium-Ion Cells, Energy Technology, 2020, 8, 1801108.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S221128552200951X\"\u003eH. Cui, et al., Operando monitoring of the open circuit voltage during electrolyte filling ensures high performance of lithium-ion batteries, Nano Energy, 2022, 104, 107874.\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Pouch Cell","offer_id":47589894193382,"sku":"ESMHVEFSMP","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Cylindrical Cell","offer_id":47589894226150,"sku":"ESMHVEFSMC","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Pouch \u0026 Cylindrical Cell","offer_id":47589894258918,"sku":"ESMHVEFSMPC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMHVEFM_main.png?v=1777497124"},{"product_id":"eslvefsmpc","title":"ECS-SL Large Vacuum Electrolyte Filling \u0026 Sealing Machine for Pouch Cells (370*360 mm), ESLVEFSMPC","description":"\u003cp\u003eVacuum electrolyte filling is a critical step in battery fabrication, ensuring the porous electrodes and separators are fully \"wetted.\" Without a vacuum, air pockets (dry spots) remain, leading to poor capacity, high internal resistance, and shortened cycle life. \u003c\/p\u003e\n\u003cp\u003eFor pouch cells, the machine often combines injection, vacuum standing, and sealing into one unit or a modular glovebox line. The cell is typically pre-sealed on three sides. Electrolyte is injected into the open side, and the cell is placed in a vacuum chamber. The vacuum pulls air out of the pouch, and when the vacuum is released, the external atmospheric pressure \"pushes\" the electrolyte into the electrode pores. The key features are: (1) \u003cstrong\u003eVacuum Standing\u003c\/strong\u003e: A chamber where the cell sits under vacuum to allow for degassing and diffusion. (2) Vacuum Sealing Specialized heat-sealing bars that operate inside the vacuum chamber to close the final side of the pouch.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 1094px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLVEFSMPC (ESL-VEFSMPC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110V or 220V±10%, single phase, 50\/60Hz, 1400 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 380.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 380.8px;\"\u003e\n\u003cp\u003e\u003cem\u003eElectrolyte Filling Features\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 380.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003ePouch Cell Sizes: Max. L370*W360*T12 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePouch Sealing Blade Length:390 mm (effective sealing length is 380 mm)\u003c\/li\u003e\n\u003cli\u003ePouch Sealing Width: 2-10 mm (standard value is 6 mm)\u003c\/li\u003e\n\u003cli\u003ePouch Sealing Thickness (tab area): 0-0.5 mm\u003c\/li\u003e\n\u003cli\u003eHeat Sealing Temperature: Max. 220℃ (±3℃) \u003c\/li\u003e\n\u003cli\u003eSealing Pressure: Max. 70 kgf (~0.6 MPa). The pneumatic force can be supplied by gas pressure from an Ar gas tank in glovebox or gas compressor in dryroom .  \u003c\/li\u003e\n\u003cli\u003eSealing Time: 0-99 s (5-6 s is recommended)\u003c\/li\u003e\n\u003cli\u003eVacuum Pressure: Max. -95 kPa (adjustable)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh precision peristaltic pump is used for electrolyte transfer and filling. Accuracy: 5 g (±1.5%); 50 g (±1%); 100 g (±0.8%). \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectrolyte Filling Time: ~2-3 min (50g electrolyte as an example)\u003c\/li\u003e\n\u003cli\u003eElectrolyte Filling Needle: PTFE, O.D. 3mm, I.D. 2mm\u003c\/li\u003e\n\u003cli\u003eElectrolyte Transfer Tubing: BPT, O.D. 6.4 mm, I.D. 3.2 mm\u003c\/li\u003e\n\u003cli\u003ePeristaltic Pump Tubing: soft BPT, O.D. 5mm, I.D. 3 mm\u003c\/li\u003e\n\u003cli\u003eElectrolyte Buffer Tank: 150 mL (inside is PTFE layer) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eGlovebox Operation Compatibility\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe KF40 feedthrough with gas\/vacuum tubing and power cable is included to connect the outside vacuum pump and gas pressure tank.\u003c\/li\u003e\n\u003cli\u003eThe electrolyte filling machine is glovebox compatible. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 203.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 203.6px;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 203.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is required to provide high vacuum for standing and sealing. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eGas Pressure Source (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor the vacuum electrolyte filling machine placed inside glovebox, an Ar gas tank (60-80 psi) is required to connect with electrolyte filling machine through KF40 feedthrough.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWhen the electrolyte filling machine is placed inside a dryroom, then a gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eCertificate\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CAS certification can be supplied upon request with additional cost. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1000 * W500 * H860 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~125 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0378775316311995\"\u003eT. Knoche, et al., In situ visualization of the electrolyte solvent filling process by neutron radiography, J. Power Sources, 2016, 331, 267-276\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201801108\"\u003eF. J. Günter, et al., Influence of the Cell Format on the Electrolyte Filling Process of Lithium-Ion Cells, Energy Technology, 2020, 8, 1801108.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S221128552200951X\"\u003eH. Cui, et al., Operando monitoring of the open circuit voltage during electrolyte filling ensures high performance of lithium-ion batteries, Nano Energy, 2022, 104, 107874.\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47589929812198,"sku":"ESLVEFSMPC","price":22999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLVEFSMPC_main.png?v=1777512150"},{"product_id":"erscpchdhhec","title":"ECS-RS Heavy-Duty Hand-Held Electrode Cutter (φ8-50 mm \u0026 25*25-50*50mm) for Coin and Pouch Cell, ERSCPCHDHHEC","description":"\u003cp\u003eExpanding a hand-held cutter's capability to pouch cells introduces specific mechanical challenges: (1) \u003cstrong\u003eIncreased Cutting Force \u0026amp; Edge Distortion\u003c\/strong\u003e: A circular punch distributing force over a φ15 mm diameter has a total cutting perimeter of roughly 47 mm. A modest pouch cell electrode (50*50 mm) has a cutting perimeter of 200 mm. Standard plier-style hand grips cannot generate enough uniform pressure for pouch dimensions. However, the risk is the insufficient, uneven manual force results in severe foil stretching, wrinkling, and coating delamination along the long straight edges of the pouch electrode. A mechanical lever arm or hydraulic assist is mandatory for pouch cell sizes. (2) \u003cstrong\u003eAlignment and Coating Tolerances\u003c\/strong\u003e: Coin cells are self-centering within the punch slot. Pouch cell electrodes require exact alignment to ensure the coating boundary aligns perfectly with the bare metal tab. Manual cutters for pouch cells must include adjustable magnetic or physical registration guides to ensure repeatability.\u003c\/p\u003e\n\u003ctable style=\"height: 328.6px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSCPCHDHHEC (ERS-CPC-HDHHEC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.05-1.0 mm thickness Electrodes, Current Collectors, and Separators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 145.6px;\"\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Disk Electrodes (Coin Cells): \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eφ8-φ50 mm. \u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThe cutting size for each hand-held die cutter is fixed value and cannot be exchanged or upgraded.  \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e(2) Rectangular Electrodes (Punch Cells): \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e25*25 mm, 40*40 mm, and 50*50 mm\u003c\/span\u003e (other customized sizes can be supplied upon request.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 20.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 20.6px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 20.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting samples should cover the cutting blade frame \u003c\/li\u003e\n\u003cli\u003eThe cutting debris should be cleaned in time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SHYNS","offers":[{"title":"Disk Electrode: φ8","offer_id":47909389533414,"sku":"ERSCPCHDHHECD8","price":169.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ10","offer_id":47909389566182,"sku":"ERSCPCHDHHECD10","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ11","offer_id":47909491605734,"sku":"ERSCPCHDHHECD11","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ12","offer_id":47909491638502,"sku":"ERSCPCHDHHECD12","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ13","offer_id":47909491671270,"sku":"ERSCPCHDHHECD13","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ14","offer_id":47909491704038,"sku":"ERSCPCHDHHECD14","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ15","offer_id":47909491736806,"sku":"ERSCPCHDHHECD15","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ16","offer_id":47909491769574,"sku":"ERSCPCHDHHECD16","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ18","offer_id":47909491802342,"sku":"ERSCPCHDHHECD18","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ19","offer_id":47909491835110,"sku":"ERSCPCHDHHECD19","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ20","offer_id":47909491867878,"sku":"ERSCPCHDHHECD20","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ25","offer_id":47909491900646,"sku":"ERSCPCHDHHECD25","price":219.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ30","offer_id":47909491933414,"sku":"ERSCPCHDHHECD30","price":229.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ35","offer_id":47909491966182,"sku":"ERSCPCHDHHECD35","price":239.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ40","offer_id":47909491998950,"sku":"ERSCPCHDHHECD40","price":239.0,"currency_code":"USD","in_stock":true},{"title":"Disk Electrode: φ50","offer_id":47909496815846,"sku":"ERSCPCHDHHECD50","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Rectangular Electrode: 25*25 mm","offer_id":47909496848614,"sku":"ERSCPCHDHHECR2525","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Rectangular Electrode: 40*40 mm","offer_id":47909496881382,"sku":"ERSCPCHDHHECR4040","price":219.0,"currency_code":"USD","in_stock":true},{"title":"Rectangular Electrode: 50*50 mm","offer_id":47909496914150,"sku":"ERSCPCHDHHECR5050","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSCPCHDHHEC_main.png?v=1782159965"},{"product_id":"erspchdmec","title":"ECS-RS Heavy-Duty Manual Electrode Cutter (Max. 120*60 mm) for Pouch Cells, ERSPCHDMEC","description":"\u003cp\u003eExpanding a hand-held cutter's capability to pouch cells introduces specific mechanical challenges: (1) \u003cstrong\u003eIncreased Cutting Force \u0026amp; Edge Distortion\u003c\/strong\u003e: A circular punch distributing force over a φ15 mm diameter has a total cutting perimeter of roughly 47 mm. A modest pouch cell electrode (50*50 mm) has a cutting perimeter of 200 mm. Standard plier-style hand grips cannot generate enough uniform pressure for pouch dimensions. However, the risk is the insufficient, uneven manual force results in severe foil stretching, wrinkling, and coating delamination along the long straight edges of the pouch electrode. A mechanical lever arm or hydraulic assist is mandatory for pouch cell sizes. (2) \u003cstrong\u003eAlignment and Coating Tolerances\u003c\/strong\u003e: Coin cells are self-centering within the punch slot. Pouch cell electrodes require exact alignment to ensure the coating boundary aligns perfectly with the bare metal tab. Manual cutters for pouch cells must include adjustable magnetic or physical registration guides to ensure repeatability.\u003c\/p\u003e\n\u003ctable style=\"height: 239.6px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSPCHDMEC (ERS-PC-HDMEC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePunching Materials\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.01-1.0 mm thickness Electrodes and Current Collectors (For separator, two weight papers can be sandwiched for cutting).\u003c\/li\u003e\n\u003cli\u003eCutting Resolution: ± 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 10px;\"\u003e\u003cem\u003eCutting Dies\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 10px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRectangular Electrodes (Punch Cells): \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eAnode: 59*46 mm, Cathode: 58*45 mm (tab: 13*11 mm)\u003c\/span\u003e (other customized sizes within 120*60 mm can be supplied upon request).\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSPCHDMEC_anode_long_tab_100x100.png?v=1782171953\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSPCHDMEC_cathode_long_tab_100x100.png?v=1782171953\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting samples should cover the cutting blade frame \u003c\/li\u003e\n\u003cli\u003eThe cutting debris should be cleaned in time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SHYNS","offers":[{"title":"Default Title","offer_id":47909565825254,"sku":"ERSPCHDMEC","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSPCHDMEC_main.png?v=1782170660"},{"product_id":"esesepctc","title":"ECS-S Economic Slitter for Electrode, Pouch Case, and Tab Cutting, ESESEPCTC","description":"\u003cp\u003eESESEPCTC is a multifunctional and economic manual slitter for electrode cutting, pouch cell case cutting and tab cutting. The maximum cutting dimension is L280*280mm. The fixtures for tab cutting and pouch cell case cutting for 4662 pouch cells are included.\u003c\/p\u003e\n\u003ctable style=\"height: 328.6px; width: 100.036%;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESESEPCTC (ES-ESEPCTC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCutting Thickness\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 0.5 mm thickness (pouch case and tab)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCutting Blade\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEffective cutting length=280 mm (Total length of 300 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePlatform Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL300mm * W260mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 145.6px;\"\u003e\u003cem\u003eCutting Fixtures\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Pouch cell case cutting fixture: L1\/W1≤ 280 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e               \u003c\/span\u003e\u003c\/span\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESESEPCTC_04_160x160.png?v=1782239209\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Pouch cell tab cutting fixture: L2 ≥ 6 mm, W1 ≤ 300 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e                                                                W3\/W4 ≤ 280 mm, H≤ 0.5 mm\u003c\/p\u003e\n\u003cp\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESESEPCTC_05_160x160.png?v=1782239209\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 20.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 20.6px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 20.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe cutting samples should cover the cutting blade frame \u003c\/li\u003e\n\u003cli\u003eThe cutting debris should be cleaned in time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500mm * W300mm * H50mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/joule\/fulltext\/S2542-4351(19)30053-4\"\u003eS. Chen, et al., Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries, Joule, 2019, 3, 1094-1105\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1.3515072\/meta\"\u003eT. Marks, et al., A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers, J. Electrochem. Soc., 2011, 158, A51\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47911873642726,"sku":"ESESEPCTC","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESESEPCTC_main.png?v=1782239209"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/ESSPCBAS_main.png?v=1776020101","url":"https:\/\/echemsupplies.com\/collections\/pouch-cells-equipment\/tier-advanced.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}