{"title":"Testing Cells for Col Redox Flow Battery","description":"\u003cp\u003e\u003cstrong\u003eTesting cells decide what your redox flow battery data actually means.\u003c\/strong\u003e A flow cell is not just a fixture — it imposes the flow field, compression, and sealing that determine whether you are measuring intrinsic membrane and electrode performance or fighting bypass leakage and shunt currents. The hardware on this page is built for vanadium, iron-chromium, all-iron, organic (quinone, viologen, TEMPO), zinc-bromine, and emerging aqueous and non-aqueous flow chemistries.\u003c\/p\u003e\n\n\u003cp\u003eThe collection covers three working scales:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-cell test fixtures\u003c\/strong\u003e for benchmarking a new membrane, felt, or catalyst at a fixed active area. Serpentine, interdigitated, and flow-through designs are available so you can isolate kinetic from mass-transport limitations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-cell stacks with serpentine flow channels\u003c\/strong\u003e for studying how cells behave in series-electrical \/ parallel-fluid configurations — bipolar plate contact, manifold pressure drop, and shunt-current losses only appear at stack level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperando and in-situ cells\u003c\/strong\u003e with optical, IR, or X-ray windows for visualizing electrolyte flow distribution, electrode wetting, gas evolution, and crossover during cycling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eMaterial choices reflect what flow battery electrolytes actually do to hardware. End plates and frames use PTFE, PVDF, or PEEK to resist concentrated sulfuric, hydrochloric, or bromide media. Current collectors are graphite or gold-plated for vanadium service; titanium alloys are offered for less aggressive aqueous organic systems. Carbon felt and carbon paper electrodes (with or without integrated microporous layers) seat against the flow field; ion-exchange membranes — sulfonated PFSA ionomers such as Nafion, hydrocarbon cation-exchange membranes, and anion-exchange membranes — are clamped between gaskets sized for the active area you specify.\u003c\/p\u003e\n\n\u003cp\u003eFor diagnostics beyond polarization curves, pair a testing cell with a reference electrode port to separate anode and cathode overpotentials, or with a transparent window cell to observe bubble formation, felt flooding, and dendrite or precipitate growth in zinc-based and iron-based chemistries.\u003c\/p\u003e\n\n\u003cp\u003eIf you are screening a new membrane or electrode, start with a single-cell fixture in the active-area range that matches your electrolyte volume. If you are evaluating system-level efficiency, shunt currents, or thermal behavior, move to a stack. For mechanism work on crossover, side reactions, or electrode wetting, see the operando and window-equipped cells. For the supporting hardware — felts, membranes, bipolar plates, and electrolytes — see \u003ca href=\"\/collections\/redox-flow-battery\"\u003eRedox Flow Battery\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"crfbt2escsc","title":"Two-Electrode Swagelok Cell (I.D.=20 mm) with Snakelike Channels for Redox Flow Battery Testing, CRFBT2ESCSC","description":"\u003cp\u003eIn redox flow battery (RFB) research, incorporating a serpentine (snakelike) channel into a Swagelok-style cell is a sophisticated modification designed to improve electrolyte distribution. While standard Swagelok cells are \"static,\" this modification mimics the flow fields found in full-scale industrial stacks. \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 207.412px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 38.8625px;\"\u003e\n\u003ctd style=\"width: 33.0882%; height: 38.8625px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7017%; height: 38.8625px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCRFBT2ESCSC (C-RFBT-2ESCSC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 63.9875px;\"\u003e\n\u003ctd style=\"width: 33.0882%; height: 63.9875px;\"\u003e\u003cem\u003eStructure\/Components\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7017%; height: 63.9875px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003eTop\/Bottom Metal Part: Ti Alloy (suitable for most battery electrolytes)\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003eSleeve: PTFE\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003eGas tubing port size: 2mm\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 27.6625px;\"\u003e\n\u003ctd style=\"width: 33.0882%; height: 27.6625px;\"\u003e\u003cem\u003eCell Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7017%; height: 27.6625px;\"\u003e\n\u003cp\u003eStandard I.D: 20 mm\u003c\/p\u003e\n\u003cp\u003e(Any other sizes, such as 10 mm, 12 mm, 16 mm, 18 mm are available upon request)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 42.7625px;\"\u003e\n\u003ctd style=\"width: 33.0882%; height: 42.7625px;\"\u003e\u003cem\u003eMax. Operation Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7017%; height: 42.7625px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e200 ºC under tightening pressure\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.0882%;\"\u003e\u003cem\u003ePlunger Material (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7017%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003eBeside the standard Ti Alloy option, the graphite plunger also can be supplied upon request. \u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.0882%;\"\u003e\u003cem\u003eTotal Solution for Redox Flow Battery Testing (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7017%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003eThe peristaltic pump (2 units), module cell (1 unit), airtight bottle (2 units), and silicone hose are included.\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CRFBT2ESCSC_05_160x160.png?v=1767680981\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34.1375px;\"\u003e\n\u003ctd style=\"width: 33.0882%; height: 34.1375px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7017%; height: 34.1375px;\"\u003eThe cell components should be thoroughly cleaned and dried after use. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RGYY","offers":[{"title":"Cell Kit Only","offer_id":47247946350822,"sku":"CRFBT2ESCSCCKO","price":449.0,"currency_code":"USD","in_stock":true},{"title":"Total Testing Kit","offer_id":47247946383590,"sku":"CRFBT2ESCSCTTK","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CRFBT2ESCSC_main.png?v=1767715814"},{"product_id":"cerfbtc","title":"Economic Redox Flow Battery Testing Cell without Flow Channels, CERFBTC","description":"\u003cp\u003eA Redox Flow Battery (RFB) testing cell is the core electrochemical component of a flow battery system where the conversion between electrical and chemical energy occurs. Unlike traditional batteries, the energy is stored in liquid electrolytes (anolyte and catholyte) which are pumped through this cell during operation.\u003c\/p\u003e\n\u003cp\u003eA standard lab-scale RFB cell is usually a \"sandwich\" stack held together by end-plates.\u003c\/p\u003e\n\u003cp\u003e(1) \u003cstrong\u003eEnd Plates\u003c\/strong\u003e: Usually made of heavy-duty stainless steel or aluminum. They provide the mechanical pressure required to seal the cell and ensure low contact resistance.\u003c\/p\u003e\n\u003cp\u003e(2) \u003cstrong\u003eCurrent Collectors\u003c\/strong\u003e: Often gold-plated or high-purity copper plates that transfer electrons from the internal electrodes to the external circuit.\u003c\/p\u003e\n\u003cp\u003e(3) \u003cstrong\u003eBipolar Plates (Flow Fields\u003c\/strong\u003e): Typically made of high-density graphite or graphite-polymer composites. These plates have machined channels (e.g., serpentine, parallel, or interdigitated) to distribute the liquid electrolyte evenly across the electrode surface.\u003c\/p\u003e\n\u003cp\u003e(4) \u003cstrong\u003ePorous\u003c\/strong\u003e \u003cstrong\u003eElectrodes\u003c\/strong\u003e: Usually carbon felt or graphite felt. These provide a high surface area for the redox reactions to occur as the liquid flows through them.\u003c\/p\u003e\n\u003cp\u003e(5) \u003cstrong\u003eIon-Exchange Membrane\u003c\/strong\u003e: The \"heart\" of the cell (often Nafion or similar PFSAs). It separates the two electrolytes to prevent mixing while allowing specific ions (like H+ or Cl-) to pass through to maintain charge balance.\u003c\/p\u003e\n\u003cp\u003e(6) \u003cstrong\u003eGaskets\u003c\/strong\u003e: Made of chemically resistant materials like PTFE (Teflon) or Viton to prevent electrolyte leakage.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 301.4px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCERFBTC (C-ERFBTC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 81px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 81px;\"\u003e\u003cem\u003eStructure\/Components\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 81px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEnd Plates: PEEK material\u003c\/li\u003e\n\u003cli\u003eCurrent Collector: Graphite (No flow channels)\u003c\/li\u003e\n\u003cli\u003eElectrode: Graphite felt (eg: 5 mm). It is not included in the package and customer should prepare it. \u003c\/li\u003e\n\u003cli\u003eGasket: Fluororubber\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 145.6px;\"\u003e\u003cem\u003eCell Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDefault effective area is 2 cm * 2 cm \u003c\/li\u003e\n\u003cli\u003eOther types of active areas, such as (1cm * 1cm), (3 cm * 3cm), (4cm * 4cm), (5 cm * 5cm) is also available upon request.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDistance for anode and cathode: ~0.2 cm\u003c\/li\u003e\n\u003cli\u003eCell size: L79×W72×H50 mm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 39.2px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 39.2px;\"\u003eThe cell components should be thoroughly cleaned and dried after use. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"CSSPL","offers":[{"title":"Default Title","offer_id":47269776556262,"sku":"CERFBTC","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CRFBTC_main.png?v=1768459848"},{"product_id":"cgrfbtcsfc","title":"General Redox Flow Battery Testing Cell with Serpentine Flow Channels, CGRFBTCSFC","description":"\u003cp\u003eA Redox Flow Battery (RFB) testing cell is the core electrochemical component of a flow battery system where the conversion between electrical and chemical energy occurs. Unlike traditional batteries, the energy is stored in liquid electrolytes (anolyte and catholyte) which are pumped through this cell during operation.\u003c\/p\u003e\n\u003cp\u003eA standard lab-scale RFB cell is usually a \"sandwich\" stack held together by end-plates.\u003c\/p\u003e\n\u003cp\u003e(1) \u003cstrong\u003eEnd Plates\u003c\/strong\u003e: Usually made of heavy-duty stainless steel or aluminum. They provide the mechanical pressure required to seal the cell and ensure low contact resistance.\u003c\/p\u003e\n\u003cp\u003e(2) \u003cstrong\u003eCurrent Collectors\u003c\/strong\u003e: Often gold-plated or high-purity copper plates that transfer electrons from the internal electrodes to the external circuit.\u003c\/p\u003e\n\u003cp\u003e(3) \u003cstrong\u003eBipolar Plates (Flow Fields\u003c\/strong\u003e): Typically made of high-density graphite or graphite-polymer composites. These plates have machined channels (e.g., serpentine, parallel, or interdigitated) to distribute the liquid electrolyte evenly across the electrode surface.\u003c\/p\u003e\n\u003cp\u003e(4) \u003cstrong\u003ePorous\u003c\/strong\u003e \u003cstrong\u003eElectrodes\u003c\/strong\u003e: Usually carbon felt or graphite felt. These provide a high surface area for the redox reactions to occur as the liquid flows through them.\u003c\/p\u003e\n\u003cp\u003e(5) \u003cstrong\u003eIon-Exchange Membrane\u003c\/strong\u003e: The \"heart\" of the cell (often Nafion or similar PFSAs). It separates the two electrolytes to prevent mixing while allowing specific ions (like H+ or Cl-) to pass through to maintain charge balance.\u003c\/p\u003e\n\u003cp\u003e(6) \u003cstrong\u003eGaskets\u003c\/strong\u003e: Made of chemically resistant materials like PTFE (Teflon) or Viton to prevent electrolyte leakage.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 1125.71px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCGRFBTCSFC (C-GRFB-TCSFC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 145.6px;\"\u003e\u003cem\u003eStructure\/Components\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 145.6px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEnd Plates: HDPE material\u003c\/li\u003e\n\u003cli\u003eCurrent Collector: Graphite plate with flow channels\u003c\/li\u003e\n\u003cli\u003eElectrode: Graphite felt (T=3 mm)\u003c\/li\u003e\n\u003cli\u003eElectrode Gasket: PTFE\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMembrane Frame: Silicone\u003c\/li\u003e\n\u003cli\u003eTubing Connection: Barbed hose fitting \u003c\/li\u003e\n\u003cli\u003eMax. Cell Voltage: 1.5-1.7 V\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_09_160x160.png?v=1770141043\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 85.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 85.6px;\"\u003e\u003cem\u003eCell Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 85.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDefault effective area is 2.0 cm * 2.0 cm (4.0 cm2) \u003c\/li\u003e\n\u003cli\u003eOther types of active areas, such as (1.6cm * 1.6cm) (3.2cm * 3.2cm), (5 cm * 5cm) are also available upon request.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCell size: W60×H70 mm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 353.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 353.6px;\"\u003e\u003cem\u003eFlow Channels\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 353.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard flow channel is \u003cstrong\u003eSerpentine\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e           \u003c\/strong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_02_100x100.png?v=1769371422\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_05_100x100.png?v=1769371754\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e Other flow channel types: such as interdigital, parallel serpentine are also available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_03_100x100.png?v=1769371649\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_04_100x100.png?v=1769371649\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 122.113px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 122.113px;\"\u003e\u003cem\u003eAssembling Diagram\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 122.113px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e      \u003cimg height=\"90\" width=\"189\" style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_06_160x160.png?v=1769372008\"\u003e    \u003cimg height=\"102\" width=\"89\" style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_07_160x160.png?v=1769372141\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 276.8px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 276.8px;\"\u003e\u003cem\u003eComplete Testing System (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 276.8px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe complete testing system with split cell, two peristaltic pumps, two bottles (100 mL), and connecting tubing (I.D. 2mm, O.D. 4mm), as well as a supporting stack, is available upon request. \u003c\/li\u003e\n\u003cli\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CZXRFBDTCSFC_04_160x160.png?v=1769377131\"\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 67.2px;\"\u003e\u003cem\u003eApplication Field\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-Vanadium Redox Flow Battery\u003c\/li\u003e\n\u003cli\u003eIron-Chromium Redox Flow Battery \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 39.2px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 39.2px;\"\u003eThe cell components should be thoroughly cleaned and dried after use. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TZTX","offers":[{"title":"Default Title","offer_id":47294771527910,"sku":"CGRFBTCSFC","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCSFC_main.png?v=1777310156"},{"product_id":"czxrfbdtcsfc","title":"Deposition-Type Testing Cell with Serpentine Flow Channels for Zn-X (X=Br2\/I2\/Fe) Redox Flow Battery, CZXRFBDTCSFC","description":"\u003cp\u003eA deposition-type redox flow battery (often called a hybrid flow battery) is a system where one of the active chemical species is deposited as a solid layer onto an electrode during the charging process, rather than remaining dissolved in the liquid electrolyte. While traditional \"all-flow\" batteries (like the Vanadium Redox Flow Battery) keep all chemicals in a liquid state at all times, deposition-type batteries involve a phase transition (Liquid to Solid).\u003c\/p\u003e\n\u003cp\u003eThe working principle for the deposition-type redox flow battery testing cell is shown below: (1) \u003cstrong\u003eThe Liquid Side (Catholyte)\u003c\/strong\u003e: Acts like a standard flow battery. The redox species stays dissolved in the electrolyte as it changes oxidation states (e.g., Fe^{2+} to Fe^{3+}). (2) \u003cstrong\u003eThe Deposition Side (Anolyte)\u003c\/strong\u003e: During charging, metal ions in the electrolyte receive electrons and plate (deposit) as a solid metal onto the surface of the negative electrode.2 During discharge, this solid metal is \"stripped\" back into the liquid.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 1194px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCZXRFBDTCSFC (C-ZXRFB-DTCSFC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 184.8px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 184.8px;\"\u003e\u003cem\u003eStructure\/Components\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 184.8px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEnd Plates: PEEK material\u003c\/li\u003e\n\u003cli\u003eCurrent Collector: Graphite plate with serpentine flow channels\u003c\/li\u003e\n\u003cli\u003eElectrode: Graphite felt (T=3 mm)\u003c\/li\u003e\n\u003cli\u003eElectrode Gasket: PTFE\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMembrane Frame: Silicone\u003c\/li\u003e\n\u003cli\u003eTubing Connection: Barbed hose fitting \u003c\/li\u003e\n\u003cli\u003eMax. Cell Voltage: 1.5-1.7 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 106.4px;\"\u003e\u003cem\u003eCell Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDefault effective area is 2.0 cm * 2.0 cm (4 cm2)\u003c\/li\u003e\n\u003cli\u003eOther types of active areas, such as (1.6cm * 1.6cm), (3.2cm * 3.2cm), (5 cm * 5cm) are also available upon request.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCell size: W60×H70 mm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 353.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 353.6px;\"\u003e\u003cem\u003eFlow Channels\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 353.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard flow channel is \u003cstrong\u003eSerpentine\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e           \u003c\/strong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_02_100x100.png?v=1769371422\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_05_100x100.png?v=1769371754\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e Other flow channel types: such as interdigital, parallel serpentine are also available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_03_100x100.png?v=1769371649\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_04_100x100.png?v=1769371649\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 151.4px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 151.4px;\"\u003e\u003cem\u003eAssembling Diagram\/Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 151.4px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CZXRFBDTCSFC_02_160x160.png?v=1769376765\" style=\"margin-bottom: 16px; float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CZXRFBDTCSFC_03_160x160.png?v=1769376996\" style=\"margin-bottom: 16px; float: none;\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.0935%;\"\u003e\u003cem\u003eReal Case Demo\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CZXRFBDTCSFC_05_160x160.png?v=1769377262\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 255.8px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 255.8px;\"\u003e\u003cem\u003eComplete Testing System (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 255.8px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe complete testing system with split cell, two peristaltic pumps, two bottles (100 mL), connecting tubing (I.D. 2mm, O.D. 4mm), and a stack for host all parts, is available upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CZXRFBDTCSFC_04_160x160.png?v=1769377131\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 67.2px;\"\u003e\u003cem\u003eApplication Field\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eZn-Br2 Redox Flow Battery\u003c\/li\u003e\n\u003cli\u003eZn-I2 Redox Flow Battery \u003c\/li\u003e\n\u003cli\u003eZn-Fe Redox Flow Battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 39.2px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 39.2px;\"\u003eThe cell components should be thoroughly cleaned and dried after use. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TZTX","offers":[{"title":"Default Title","offer_id":47295916474598,"sku":"CZXRFBDTCSFC","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CZXRFBDTCSFC_main.png?v=1769376188"},{"product_id":"crfbtcssfc","title":"Redox Flow Battery Testing Cell Stack with Serpentine Flow Channels, CRFBTCSSFC","description":"\u003cp\u003eA Redox Flow Battery (RFB) testing stack is a laboratory-scale or pilot-scale assembly used to evaluate the electrochemical performance, fluid dynamics, and durability of a battery design before full-scale commercialization. While a \"single cell\" tests a specific material (like a new membrane), a stack tests how multiple cells interact when connected electrically in series and fluidically in parallel.\u003c\/p\u003e\n\u003cp\u003eA testing cell stack is a \"sandwich\" of multiple repeating units. The primary components are: (1) \u003cstrong\u003eBipolar Plates (BPP)\u003c\/strong\u003e: These plates separate individual cells. They must be electronically conductive to transfer electrons between cells but chemically inert to the electrolyte. They often feature flow fields (serpentine or interdigitated patterns) to distribute the liquid evenly. (2) \u003cstrong\u003ePorous Electrodes\u003c\/strong\u003e: Usually made of carbon felt or carbon paper, these provide the high surface area needed for the redox reactions to occur. (3) \u003cstrong\u003eIon-Exchange Membrane (IEM)\u003c\/strong\u003e: Positioned between the positive and negative half-cells of each unit to allow charge-balancing ions to pass while preventing the \"crossover\" of the active redox chemicals. (4) \u003cstrong\u003eEnd Plates \u0026amp; Current Collectors\u003c\/strong\u003e: Heavy-duty outer plates (often stainless steel or high-strength plastic) that provide the clamping force to seal the stack. Copper current collectors are placed just inside the end plates to connect the stack to the power supply.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 1194px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 35.6px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCRFBTCSSFC (C-RFB-TCSSFC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 184.8px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 184.8px;\"\u003e\u003cem\u003eStructure\/Components\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 184.8px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEnd Plates: PEEK material\u003c\/li\u003e\n\u003cli\u003eCurrent Collector: Graphite plate with serpentine flow channels\u003c\/li\u003e\n\u003cli\u003eElectrode: Graphite felt (T=3 mm)\u003c\/li\u003e\n\u003cli\u003eElectrode Gasket: PTFE\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMembrane Frame: Silicone\u003c\/li\u003e\n\u003cli\u003eTubing Connection: Barbed hose fitting \u003c\/li\u003e\n\u003cli\u003eMax. Cell Voltage: 1.5-1.7 V\u003c\/li\u003e\n\u003cli style=\"color: rgb(255, 42, 0);\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eThree or five repeated units\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 106.4px;\"\u003e\u003cem\u003eCell Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEffective area for 3 stacks is 3.2 cm * 3.2 cm (1.6 cm*1.6 cm or 2.0 cm * 20 cm is also available upon request; the customized stack number can be up to 5). The single cell size is W90×H100 mm \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEffective area for 5 stacks is 5.0 cm * 5.0 cm (the customized stack numbers can be upto 8); The single cell size is W90×H100 mm \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 353.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 353.6px;\"\u003e\u003cem\u003eFlow Channels\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 353.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard flow channel is \u003cstrong\u003eSerpentine\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e           \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_02_100x100.png?v=1769371422\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_05_100x100.png?v=1769371754\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e Other flow channel types: such as interdigital, parallel serpentine are also available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_03_100x100.png?v=1769371649\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_04_100x100.png?v=1769371649\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 151.4px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 151.4px;\"\u003e\u003cem\u003eAssembling Diagram\/Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 151.4px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e        \u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CRFBTCSSFC_03_160x160.png?v=1769379438\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 67.2px;\"\u003e\u003cem\u003eApplication Field\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll-Vanadium Redox Flow Battery\u003c\/li\u003e\n\u003cli\u003eIron-Chromium Redox Flow Battery \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 39.2px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 39.2px;\"\u003eThe cell components should be thoroughly cleaned and dried after use. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TZTX","offers":[{"title":"Three Stacks","offer_id":47295964512486,"sku":"CRFBTCSSFC3","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Five Stacks","offer_id":47295964545254,"sku":"CRFBTCSSFC5","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CRFBTCSSFC_main.png?v=1769378575"},{"product_id":"corfbtctbpsfc","title":"Organic Redox Flow Battery Testing Cell with Ti Bipolar Plates and Serpentine Flow Channels, CORFBTCTBPSFC","description":"\u003cp\u003eAn organic redox flow battery (ORFB) testing cell is a specialized laboratory-scale device used to evaluate new organic redox-active molecules for energy storage. These cells are typically designed for rapid assembly and disassembly to facilitate high-throughput testing of different electrolytes, membranes, and electrodes. The Ti plate has multifunctional roles in the testing cell: (1) \u003cstrong\u003eCurrent Collection\u003c\/strong\u003e: It acts as the bridge to transfer electrons from the internal carbon electrodes to the external circuit (load\/cycler). (2) \u003cstrong\u003eMechanical Compression\u003c\/strong\u003e: It helps distribute the compression force evenly across the active area, which is critical for reducing contact resistance with the carbon felt. (3) \u003cstrong\u003eFluid Barrier\u003c\/strong\u003e: In designs where flow channels are machined directly into the Ti plate, it also acts as the barrier to prevent electrolyte leakage.\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 941.101px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 41.75px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 41.75px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 41.75px;\"\u003e\n\u003cp\u003e\u003cspan\u003eCORFBTCTBPSFC (C-ORFB-TCTBPSFC)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 191.7px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 191.7px;\"\u003e\u003cem\u003eStructure\/Components\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 191.7px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEnd Plates: PEEK material\u003c\/li\u003e\n\u003cli\u003eCurrent Collector: Ti plate with flow channels\u003c\/li\u003e\n\u003cli\u003eElectrode: Graphite felt (T=2-5 mm)\u003c\/li\u003e\n\u003cli\u003eElectrode Gasket: PTFE\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMembrane Frame: Silicone\u003c\/li\u003e\n\u003cli\u003eTubing Connection: Barbed hose fitting \u003c\/li\u003e\n\u003cli\u003eMax. Cell Voltage: ~2.0 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 146.363px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 146.363px;\"\u003e\u003cem\u003eCell Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 146.363px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDefault effective area is 2.0 cm * 2.0 cm (4.0 cm2) \u003c\/li\u003e\n\u003cli\u003eOther types of active areas, such as (1.6cm * 1.6cm), (3.2cm * 3.2cm), (5 cm * 5cm) are also available upon request.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCell size: W60×H70 mm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 353.6px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 353.6px;\"\u003e\u003cem\u003eFlow Channels\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 353.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStandard flow channel is \u003cstrong\u003eSerpentine\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e           \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_02_100x100.png?v=1769371422\"\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_05_100x100.png?v=1769371754\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e Other flow channel types: such as interdigital, parallel serpentine are also available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_03_100x100.png?v=1769371649\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CGRFBTCFC_04_100x100.png?v=1769371649\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 148.4px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 148.4px;\"\u003e\u003cem\u003eAssembling Diagram\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 148.4px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CORFBTCTBPSFC_02_160x160.png?v=1769382302\" style=\"margin-bottom: 16px; float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CORFBTCTBPSFC_03_160x160.png?v=1769382370\" style=\"margin-bottom: 16px; float: none;\" width=\"112\" height=\"128\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 13.3125px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 13.3125px;\"\u003e\u003cem\u003eApplication Field\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 13.3125px;\"\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\n\u003cul\u003e\n\u003cli\u003eOrganic Redox Flow Battery\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 45.975px;\"\u003e\n\u003ctd style=\"width: 33.0935%; height: 45.975px;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 66.7266%; height: 45.975px;\"\u003eThe cell components should be thoroughly cleaned and dried after use. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TZTX","offers":[{"title":"Default Title","offer_id":47295972147430,"sku":"CORFBTCTBPSFC","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/CORFBTCTBPSFC_main.png?v=1769382114"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/CGRFBTCSFC_main.png?v=1777310186","url":"https:\/\/echemsupplies.com\/collections\/testing-cells-for-redox-flow-battery.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}