{"title":"Vibratory Ball Mills","description":"\u003cp\u003e\u003cstrong\u003eVibratory ball mills deliver impact-dominated comminution for hard, brittle, and air-sensitive battery materials — reaching analytical fineness or true nanoscale particle sizes through high-frequency, small-amplitude oscillation rather than the rolling and shearing motion of planetary mills.\u003c\/strong\u003e The grinding jar is driven through linear or figure-eight paths at roughly 15-30 Hz, accelerating media against the jar walls so that impact, not friction, governs the size-reduction kinetics. This makes the format well suited to mechanochemical synthesis of solid electrolytes, alloying of conversion-type anodes, and pulverization of catalyst supports and ceramic precursors.\u003c\/p\u003e\n\n\u003ch3\u003eFormat families\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisk \/ cup mills (shatterbox style):\u003c\/strong\u003e a puck-and-ring set inside a heavy reinforced grinding jar, driven by horizontal oscillations to pulverize hard or fibrous solids to analytical fineness in short cycles. Typical use: rapid sample preparation for XRD, XRF, ICP, and other bulk-analysis workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-energy shaker \/ mixer mills:\u003c\/strong\u003e dual-jar oscillating platforms designed for sustained mechanical activation. Common in solid-state research for sulfide and oxide electrolyte synthesis, conversion-anode composites, and reactive milling of pre-cursor blends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNano high-energy and ultra-high-energy mills:\u003c\/strong\u003e elevated frequency platforms that push primary particle sizes from the micrometer range down to approximately 10-100 nm, supporting nanostructured cathode, anode, and solid-electrolyte work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCryogenic high-energy mills:\u003c\/strong\u003e integrated cooling that suppresses cold-welding and thermal degradation in ductile, polymeric, or thermally sensitive samples — relevant for sulfur-carbon composites, polymer electrolytes, and biological matrices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-throughput multi-vial platforms:\u003c\/strong\u003e arrays of small jars (for example 12 x 10 mL) for parallel formulation screening of electrode slurries, dopant series, and solid-electrolyte compositions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini single-jar and glovebox-compatible units:\u003c\/strong\u003e compact tabletop mills sized for milliliter-scale batches, including configurations qualified for argon-filled glovebox operation when working with moisture- or oxygen-sensitive sulfides, lithium metal composites, and air-sensitive precursors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eChoosing within this section comes down to batch volume, target particle size, and sample sensitivity: disk and cup mills for fast analytical preparation of hard solids; high-energy shaker mills for mechanochemistry and solid-electrolyte synthesis; nano and ultra-high-energy mills when a nanoscale endpoint is required; cryogenic mills for thermally sensitive or ductile samples; and glovebox-compatible mini mills for inert-atmosphere work. For rotational alternatives, see \u003ca href=\"\/collections\/planetary-ball-mills\"\u003ePlanetary Ball Mills\u003c\/a\u003e; for the broader category, see \u003ca href=\"\/collections\/ball-mills\"\u003eBall Mills\u003c\/a\u003e and \u003ca href=\"\/collections\/mixers-and-mills\"\u003eMixers and Mills\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"efssjhevbm","title":"ECS-FS Single Jar High-Energy Vibratory Ball Mill (1700 rpm, 80 mL), EFSSJHEVBM","description":"\u003cp\u003eA High-Energy Vibratory Ball Mill (also known as a Shaker Mill or Mixer Mill) operates on a fundamentally different kinetic principle than planetary mills. Instead of using centrifugal force, the grinding jar undergoes high-frequency, small-amplitude oscillations—typically in a \"figure-eight\" or linear path.\u003c\/p\u003e\n\u003cp\u003eIn a vibratory mill, the grinding media (balls) and the material are subjected to intense accelerations caused by the high-frequency vibration of the jar (usually 15 to 30 Hz or 900 to 1800 cycles\/min). (1) \u003cstrong\u003eImpact Dominance\u003c\/strong\u003e: Unlike the rolling and shearing motion of a planetary mill, the vibratory mill is dominated by frontal impacts. The balls strike the end-caps of the jar with immense force. (2) \u003cstrong\u003eKinetic Energy\u003c\/strong\u003e: The energy transferred is proportional to the frequency and the mass of the grinding balls. This makes it exceptionally effective at breaking down the crystalline structure of brittle materials.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSSJHEVBM (EFS-SJHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 250 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in three-dimension for the milling jar\u003c\/li\u003e\n\u003cli\u003eMilling jar speed: Max. 1700 rpm (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 80 mL (single jar). The maximum processing capacity is 80 mL. \u003c\/li\u003e\n\u003cli\u003eMinimum processing sample amount: 1 g\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmmj?variant=47539880624358\"\u003eEFSAVBMMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ80-SS304_100x100.png?v=1776233252\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ50-ZrO2_100x100.png?v=1776233166\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ50-WC_100x100.png?v=1776233166\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmvmj?variant=47539971981542\"\u003eEFSAVBMVMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ80-SS304_100x100.png?v=1776234172\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ50-ZrO2_100x100.png?v=1776234172\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ50-WC_100x100.png?v=1776234173\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 1 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL430 * W318 * H268 mm (Ar-filled Glovebox Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47539835732198,"sku":"EFSSJHEVBM","price":4499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSSJHEVBM_main.png?v=1776235883"},{"product_id":"efsdjhevbm","title":"ECS-FS Dual Jars High-Energy Vibratory Ball Mill (1700 rpm, 2*80 mL), EFSDJHEVBM","description":"\u003cp\u003eA High-Energy Vibratory Ball Mill (also known as a Shaker Mill or Mixer Mill) operates on a fundamentally different kinetic principle than planetary mills. Instead of using centrifugal force, the grinding jar undergoes high-frequency, small-amplitude oscillations—typically in a \"figure-eight\" or linear path.\u003c\/p\u003e\n\u003cp\u003eIn a vibratory mill, the grinding media (balls) and the material are subjected to intense accelerations caused by the high-frequency vibration of the jar (usually 15 to 30 Hz or 900 to 1800 cycles\/min). (1) \u003cstrong\u003eImpact Dominance\u003c\/strong\u003e: Unlike the rolling and shearing motion of a planetary mill, the vibratory mill is dominated by frontal impacts. The balls strike the end-caps of the jar with immense force. (2) \u003cstrong\u003eKinetic Energy\u003c\/strong\u003e: The energy transferred is proportional to the frequency and the mass of the grinding balls. This makes it exceptionally effective at breaking down the crystalline structure of brittle materials.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSDJHEVBM (EFS-DJHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in three-dimension for the milling jar\u003c\/li\u003e\n\u003cli\u003eMilling jar speed: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1700 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor automatic mode, the milling speed and time can be programmed to set gradient operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 80 mL\/each (dual jars). The maximum processing capacity is 160 mL. \u003c\/li\u003e\n\u003cli\u003eMinimum processing sample amount in each jar: 1 g\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmmj?variant=47539880624358\"\u003eEFSAVBMMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ80-SS304_100x100.png?v=1776233252\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ50-ZrO2_100x100.png?v=1776233166\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMMJ50-WC_100x100.png?v=1776233166\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmvmj?variant=47539971981542\"\u003eEFSAVBMVMJ\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ80-SS304_100x100.png?v=1776234172\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ50-ZrO2_100x100.png?v=1776234172\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVPBMVMJ50-WC_100x100.png?v=1776234173\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 1 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL620 * W320 * H268 mm (Ar-filled Glovebox Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~68 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47541849882854,"sku":"EFSDJHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSDJHEVBM_main.png?v=1776266104"},{"product_id":"efsmsjvbm","title":"ECS-FS Mini Single Jar Vibratory Ball Mill (3000 CPM, 15 mL) (Ar-Filled Glovebox-Compatible), EFSMSJVBM","description":"\u003cp\u003eA mini single-jar vibratory ball mill is a specialized piece of laboratory equipment designed for high-energy grinding, mixing, and mechanochemical alloying on a small scale. Unlike planetary ball mills that use centrifugal force, vibratory mills use high-frequency oscillations to impact the grinding media against the material.\u003c\/p\u003e\n\u003cp\u003eThe \"mini\" designation typically refers to a tabletop unit designed for small batch sizes, often ranging from 5 ml to 50 ml. (1) \u003cstrong\u003eVibratory Motion\u003c\/strong\u003e: The jar is mounted on a high-speed motor shaft that generates a circular or elliptical vibration. This causes the grinding balls to collide with the sample and the jar walls at high frequencies (up to 3,000 RPM or 50 Hz). (2) \u003cstrong\u003eHigh Energy\u003c\/strong\u003e: The kinetic energy transferred is intense, making these mills ideal for producing nano-sized powders and achieving uniform homogenization in a fraction of the time required by traditional roller mills. (3) \u003cstrong\u003eSingle Jar Setup\u003c\/strong\u003e: This configuration is streamlined for R\u0026amp;D where cross-contamination must be avoided and only one sample needs processing at a time.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSMSJVBM (EFS-MSJVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 30 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in three-dimension for the milling jar\u003c\/li\u003e\n\u003cli\u003eMilling jar frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 3000 cycles\/min\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotion range: 12 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 15 mL (single jar). The maximum processing capacity is 15 mL. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavbmmj15?variant=47541995733222\"\u003eEFSAVBMMJ15\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-SS304_100x100.png?v=1776268980\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-PTFE_100x100.png?v=1776268979\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-ZrO2_100x100.png?v=1776268979\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVBMMJ15-WC_100x100.png?v=1776268979\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 6 mm\u003c\/li\u003e\n\u003cli\u003ePower size after milling: 0.1- 20 um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL150 * W210 * H220 mm (Ar-filled Glovebox Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47541949038822,"sku":"EFSMSJVBM","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSMSJVBM_main.png?v=1776269586"},{"product_id":"efsnohevbm","title":"ECS-FS Nano High-Energy Vibratory Ball Mill (1800 rpm, 2*125 mL), EFSNOHEVBM","description":"\u003cp\u003eTo achieve true \u003cb data-path-to-node=\"0\" data-index-in-node=\"16\"\u003enanosize-output\u003c\/b\u003e, a high-energy vibratory ball mill must operate at significantly higher frequencies than standard mixers. For research in advanced battery electrodes or solid electrolytes, these mills are used to reduce particles from micrometer scales down to the \u003cb data-path-to-node=\"0\" data-index-in-node=\"281\"\u003e10–100 nm\u003c\/b\u003e range through intensive impact and friction.\u003c\/p\u003e\n\u003cp\u003eIn a high-energy vibratory mill, the jar undergoes high-frequency, small-amplitude oscillations. This creates a \"chaotic\" movement of the grinding media, where the balls strike each other and the jar walls with high kinetic energy (Ek = 1\/2mv^2). (1) \u003cstrong\u003eImpact Force\u003c\/strong\u003e: Breaks down brittle crystalline structures. (2) \u003cstrong\u003eShear Force\u003c\/strong\u003e: Essential for exfoliating layered materials (like graphite) and refining particle size. (3) \u003cstrong\u003eMechanochemical Activation\u003c\/strong\u003e: The energy is often high enough to trigger chemical reactions or phase changes at the surface of the particles.\u003c\/p\u003e\n\u003cp\u003eTo reach the nanometer scale, the system must be optimized far beyond standard \"mixing\" protocols:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrinding Media (Balls):\u003c\/strong\u003e It is highly recommended to use micro-media (0.1 mm to 1.0 mm) for the final stages. Smaller balls provide a much higher frequency of contact points per volume. Normally Yttrium-stabilized Zirconia (YSZ) is the gold standard due to its high density (6.0 g\/cm3) and extreme wear resistance, preventing sample contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency and Amplitude\u003c\/strong\u003e: High-energy units typically operate at 30–60 Hz (1,800–3,600 RPM). Amplitude: Usually set between 1–10 mm. For nanosizing, a smaller amplitude at a higher frequency is often more effective at generating the necessary shear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlurry vs. Dry Milling\u003c\/strong\u003e: Wet milling is highly recommended for nanosizing. Using a solvent (ethanol, NMP, or DI water) prevents particle agglomeration (where small particles stick back together due to Van der Waals forces).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSNOHEVBM (EFS-NOHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in horizontal arc shape back and forth\u003c\/li\u003e\n\u003cli\u003eMilling jar vibration frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1800 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time: 10-60 s\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 125 mL\/each (dual jar). The maximum processing capacity is 250 mL. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-30 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsanohevbmmj125?variant=47542060876006\"\u003eEFSANOHEVBMMJ125\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-WC_100x100.png?v=1776271879\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-PTFE_100x100.png?v=1776271928\" alt=\"\" style=\"float: none;\"\u003e  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-ZrO2_100x100.png?v=1776271928\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-SS304_100x100.png?v=1776271879\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsanohevbmvmj125?variant=47542083059942\"\u003eEFSANOHEVBMVMJ125\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMVMJ125-ZrO2_100x100.png?v=1776272498\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMVMJ125-PTFE_100x100.png?v=1776272498\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMVMJ125-WC_100x100.png?v=1776272498\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e~100 nm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLow Temperature Version (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIf the low-temperature (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e-50°C\u003c\/span\u003e) vibratory ball mill is required, the integration with a liquid nitrogen or cooling water is available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOHEVBM_04_100x100.png?v=1776273661\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Version (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIf the milling jars need to be operated at the high temperature (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 200°C, 1200 W\u003c\/span\u003e), the heating version can be supplied upon request.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOHEVBM_05_100x100.png?v=1776273805\"\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOHEVBM_06_100x100.png?v=1776273804\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL680 * W540 * H320 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~95 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47542047146214,"sku":"EFSNOHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOHEVBM_main.png?v=1776273446"},{"product_id":"efshtnohevbm","title":"ECS-FS High-Throughput Nano High-Energy Vibratory Ball Mill (1800 rpm, 12*10 mL), EFSHTNOHEVBM","description":"\u003cp\u003eTo achieve true \u003cb data-index-in-node=\"16\" data-path-to-node=\"0\"\u003enanosize-output\u003c\/b\u003e, a high-energy vibratory ball mill must operate at significantly higher frequencies than standard mixers. For research in advanced battery electrodes or solid electrolytes, these mills are used to reduce particles from micrometer scales down to the \u003cb data-index-in-node=\"281\" data-path-to-node=\"0\"\u003e10–100 nm\u003c\/b\u003e range through intensive impact and friction.\u003c\/p\u003e\n\u003cp\u003eIn a high-energy vibratory mill, the jar undergoes high-frequency, small-amplitude oscillations. This creates a \"chaotic\" movement of the grinding media, where the balls strike each other and the jar walls with high kinetic energy (Ek = 1\/2mv^2). (1) \u003cstrong\u003eImpact Force\u003c\/strong\u003e: Breaks down brittle crystalline structures. (2) \u003cstrong\u003eShear Force\u003c\/strong\u003e: Essential for exfoliating layered materials (like graphite) and refining particle size. (3) \u003cstrong\u003eMechanochemical Activation\u003c\/strong\u003e: The energy is often high enough to trigger chemical reactions or phase changes at the surface of the particles.\u003c\/p\u003e\n\u003cp\u003eTo reach the nanometer scale, the system must be optimized far beyond standard \"mixing\" protocols:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrinding Media (Balls):\u003c\/strong\u003e It is highly recommended to use micro-media (0.1 mm to 1.0 mm) for the final stages. Smaller balls provide a much higher frequency of contact points per volume. Normally Yttrium-stabilized Zirconia (YSZ) is the gold standard due to its high density (6.0 g\/cm3) and extreme wear resistance, preventing sample contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency and Amplitude\u003c\/strong\u003e: High-energy units typically operate at 30–60 Hz (1,800–3,600 RPM). Amplitude: Usually set between 1–10 mm. For nanosizing, a smaller amplitude at a higher frequency is often more effective at generating the necessary shear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlurry vs. Dry Milling\u003c\/strong\u003e: Wet milling is highly recommended for nanosizing. Using a solvent (ethanol, NMP, or DI water) prevents particle agglomeration (where small particles stick back together due to Van der Waals forces).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSHTNOHEVBM (EFS-HTNOHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in horizontal arc shape back and forth\u003c\/li\u003e\n\u003cli\u003eMilling jar vibration frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1800 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time: 10-60 s\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 10 mL\/each (maximum jar numbers are 12). The maximum processing capacity is 120 mL. The smaller jars, such as 2 mL and 5 mL, are also available upon request.  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-30 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsahtnohevbmmj10?variant=47542666133734\"\u003eEFSAHTNOHEVBMMJ10\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-SS304_100x100.png?v=1776280731\" alt=\"\" style=\"float: none;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-Nylon_100x100.png?v=1776280778\" alt=\"\" style=\"float: none;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-ZrO2_100x100.png?v=1776280778\" alt=\"\" style=\"float: none;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAHTNOHEVBMMJ10-WC_100x100.png?v=1776280731\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 10 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e~100 nm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL680 * W540 * H320 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~98 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884212003318\"\u003eT.P. Yadav, et al., Synthesis of nanocrystalline cerium oxide by high energy ball milling, Ceramics International, 2012, 38, 5783-5789\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.3367\/UFNe.2019.06.038581\/meta\"\u003eA I Gusev, et al., High-energy ball milling of nonstoichiometric compounds, Phys.-Usp., 2020, 63, 342\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47542583787750,"sku":"EFSHTNOHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSHTNOHEVBM_main.png?v=1776281517"},{"product_id":"efschevbm","title":"ECS-FS Cryogenic High-Energy Vibratory Ball Mill (1800 rpm, 2*50 mL), EFSCHEVBM","description":"\u003cp\u003eFor reaching the nanometer scale with thermally sensitive or ductile materials—such as sulfur-based composites (SPAN), polymers, or biological samples—a Cryogenic High-Energy Vibratory Ball Mill is the definitive tool. Cryomilling prevents the \"cold-welding\" and thermal degradation that typically occur during high-energy impact, keeping the sample brittle and facilitating efficient fracture into the 10–100 nm range.\u003c\/p\u003e\n\u003cp\u003eIn standard milling, the kinetic energy of the grinding media is converted into heat upon impact. For materials with a low glass transition temperature (Tg), this causes the particles to soften, deform, or agglomerate rather than shatter. (1) \u003cstrong\u003eEmbrittlement\u003c\/strong\u003e: Liquid nitrogen (LN2) cools the sample to approximately -196°C. At these temperatures, even ductile polymers and soft metals become brittle, allowing for rapid size reduction. (2) \u003cstrong\u003eStructural Preservation\u003c\/strong\u003e: For electrochemical materials like SPAN (Sulfurized Polyacrylonitrile), maintaining the chemical bond integrity is crucial. Cryomilling prevents the localized \"hot spots\" that could trigger premature desulfurization. (3) \u003cstrong\u003ePrevention of Agglomeration\u003c\/strong\u003e: By suppressing the surface energy increases caused by heat, particles are less likely to fuse back together during the process.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 627.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSCHEVBM (EFS-CHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 150 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 165.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 165.2px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 165.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in horizontal arc shape back and forth\u003c\/li\u003e\n\u003cli\u003eMilling jar vibration frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1800 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time: 10-60 s\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLiquid N2 Tank: 30 L\u003c\/li\u003e\n\u003cli\u003eLowest temperature detection: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e-200°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 137.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 137.2px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 137.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 30 or 50 mL\/each (dual jars). The maximum processing capacity is 100 mL. Smaller jar with 2 mL, 5 mL are also available upon request.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Nylon, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-25 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Cryogenic Milling Jars: \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsachevbmmj?variant=47542761226470\"\u003eEFSACHEVBMMJ \u003c\/a\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSACNOHEVBMMJ50-Nylon_100x100.png?v=1776300887\" style=\"float: none;\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 8 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e~5 um\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL470 * W360 * H250 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~48 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47542754607334,"sku":"EFSCHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSCHEVBM_main.png?v=1776302460"},{"product_id":"efsnouhevbm","title":"ECS-FS Nano Ultra-High-Energy Vibratory Ball Mill (2000 rpm, 2*125 mL), EFSNOUHEVBM","description":"\u003cp\u003eTo achieve true \u003cb data-index-in-node=\"16\" data-path-to-node=\"0\"\u003enanosize-output\u003c\/b\u003e, a high-energy vibratory ball mill must operate at significantly higher frequencies than standard mixers. For research in advanced battery electrodes or solid electrolytes, these mills are used to reduce particles from micrometer scales down to the \u003cb data-index-in-node=\"281\" data-path-to-node=\"0\"\u003e10–100 nm\u003c\/b\u003e range through intensive impact and friction.\u003c\/p\u003e\n\u003cp\u003eIn a high-energy vibratory mill, the jar undergoes high-frequency, small-amplitude oscillations. This creates a \"chaotic\" movement of the grinding media, where the balls strike each other and the jar walls with high kinetic energy (Ek = 1\/2mv^2). (1) \u003cstrong\u003eImpact Force\u003c\/strong\u003e: Breaks down brittle crystalline structures. (2) \u003cstrong\u003eShear Force\u003c\/strong\u003e: Essential for exfoliating layered materials (like graphite) and refining particle size. (3) \u003cstrong\u003eMechanochemical Activation\u003c\/strong\u003e: The energy is often high enough to trigger chemical reactions or phase changes at the surface of the particles.\u003c\/p\u003e\n\u003cp\u003eTo reach the nanometer scale, the system must be optimized far beyond standard \"mixing\" protocols:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrinding Media (Balls):\u003c\/strong\u003e It is highly recommended to use micro-media (0.1 mm to 1.0 mm) for the final stages. Smaller balls provide a much higher frequency of contact points per volume. Normally Yttrium-stabilized Zirconia (YSZ) is the gold standard due to its high density (6.0 g\/cm3) and extreme wear resistance, preventing sample contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency and Amplitude\u003c\/strong\u003e: High-energy units typically operate at 30–60 Hz (1,800–3,600 RPM). Amplitude: Usually set between 1–10 mm. For nanosizing, a smaller amplitude at a higher frequency is often more effective at generating the necessary shear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlurry vs. Dry Milling\u003c\/strong\u003e: Wet milling is highly recommended for nanosizing. Using a solvent (ethanol, NMP, or DI water) prevents particle agglomeration (where small particles stick back together due to Van der Waals forces).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ctable style=\"height: 679.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSNOUHEVBM (EFS-NOUHEVBM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\/mixing\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eHigh-Frequency vibration in horizontal arc shape back and forth\u003c\/li\u003e\n\u003cli\u003eMilling jar vibration frequency: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 2000 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time can be set in 99h: 99m: 99s. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 285.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 285.6px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 285.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 125 mL\/each (dual jar). The maximum processing capacity is 250 mL. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, PTFE, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. Milling balls in 1-30 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Jars \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsanohevbmmj125?variant=47542060876006\"\u003eEFSANOHEVBMMJ125\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-WC_100x100.png?v=1776271879\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-PTFE_100x100.png?v=1776271928\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-ZrO2_100x100.png?v=1776271928\"\u003e \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSANOHEVBMMJ125-SS304_100x100.png?v=1776271879\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 5 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u0026lt;80 nm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 10px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 10px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL520 * W520 * H380 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~128 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1742-6596\/1264\/1\/012016\/meta\"\u003eT. Yoshida, et al., Vibration characteristics of an operating ball mill, J. Phys.: Conf. Ser., 2019, 1264, 012016\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591009006329\"\u003eH. Lee, et al., Using the discrete element method to analyze the breakage rate in a centrifugal\/vibration mill, Powder Technology, 2024, 36, 14, 6748–6764\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47543465115878,"sku":"EFSNOUHEVBM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSNOUHEVBM_main.png?v=1776314477"},{"product_id":"efsdcvm","title":"ECS-FS Disk\/Cup Vibratory Mill (1500 rpm, 2*100 mL), EFSDCVM","description":"\u003cp\u003eA Vibratory Disk Mill (also commonly known as a Vibratory Cup Mill or Shatterbox) is a high-speed pulverizer designed to reduce hard, brittle, or fibrous materials to analytical fineness—typically sub-75 microns—in less than two minutes.\u003c\/p\u003e\n\u003cp\u003eThe mill uses a \"puck and ring\" system housed inside a heavy, reinforced grinding set (the \"cup\"). (1) \u003cstrong\u003eAction\u003c\/strong\u003e: The machine utilizes a powerful motor to create high-frequency horizontal oscillations. This causes the internal grinding elements (a solid puck and often a hollow ring) to accelerate and strike the walls of the jar. (2) \u003cstrong\u003eForce\u003c\/strong\u003e: The material is pulverized through a combination of intense impact and extreme pressure\/friction as the puck and ring slide and collide. (3) \u003cstrong\u003eSpeed\u003c\/strong\u003e: Because the grinding elements are so heavy relative to the sample size, the energy density is incredibly high.\u003c\/p\u003e\n\u003ctable style=\"height: 736.4px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFSDCVM (EFS-DCVM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMoving Mode: round motion\u003c\/li\u003e\n\u003cli\u003eMilling Plate Rotation Speed: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1500 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time can be set in 9999 min\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMilling Station\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Station\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSDCVM_02_100x100.png?v=1776388244\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDouble Stations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSDCVM_03_100x100.png?v=1776388244\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 285.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 285.6px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 285.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 100 mL\/each (single or dual jar depends on the milling stations). The maximum processing capacity is 100 mL or 200 mL. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Disks: \u003ca href=\"https:\/\/echemsupplies.com\/products\/efsavdmmd100?variant=47546407059686\"\u003eEFSAVDMMD100\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVDMMD100-SS304_100x100.png?v=1776387152\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVDMMD100-ZrO2_100x100.png?v=1776387152\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVDMMD100-WC_100x100.png?v=1776387152\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSAVDMMD100-Agate_100x100.png?v=1776387152\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 15 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u0026lt;20 um\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~198 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0301679X17302062\"\u003eP. Plescia, et al., Analysis of friction coefficients in a vibrating cup mill (ring mill) during grinding, Tribology International, 2017, 114, 458-468\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0921883120304271\"\u003eM. Truee, et al., Measurement and evaluation of the grinding bodies’ motions in a vibratory disc mill filled with viscous fluids, Advanced Powder Technology, 2020, 31, 4376-4389\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Single Milling State","offer_id":47546472825062,"sku":"EFSDCVMSS","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Double Milling Stations","offer_id":47546472857830,"sku":"EFSDCVMDS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFSDCVM_01.png?v=1776388244"},{"product_id":"efmdcvm","title":"ECS-FM Disk\/Cup Vibratory Mill (1500 rpm, 2*500 mL), EFMDCVM","description":"\u003cp\u003eA Vibratory Disk Mill (also commonly known as a Vibratory Cup Mill or Shatterbox) is a high-speed pulverizer designed to reduce hard, brittle, or fibrous materials to analytical fineness—typically sub-75 microns—in less than two minutes.\u003c\/p\u003e\n\u003cp\u003eThe mill uses a \"puck and ring\" system housed inside a heavy, reinforced grinding set (the \"cup\"). (1) \u003cstrong\u003eAction\u003c\/strong\u003e: The machine utilizes a powerful motor to create high-frequency horizontal oscillations. This causes the internal grinding elements (a solid puck and often a hollow ring) to accelerate and strike the walls of the jar. (2) \u003cstrong\u003eForce\u003c\/strong\u003e: The material is pulverized through a combination of intense impact and extreme pressure\/friction as the puck and ring slide and collide. (3) \u003cstrong\u003eSpeed\u003c\/strong\u003e: Because the grinding elements are so heavy relative to the sample size, the energy density is incredibly high.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 1004.4px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFMDCVM (EFM-DCVM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC380V±10%, three phases, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC220V±10%, three phases can be supplied upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMoving Mode: round motion\u003c\/li\u003e\n\u003cli\u003eMilling Plate Rotation Speed: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1500 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time can be set in 9999 min\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 268px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 268px;\"\u003e\u003cem\u003eMilling Station\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 268px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Station\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMDCVM_03_100x100.png?v=1776394633\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDouble Stations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMDCVM_04_100x100.png?v=1776394633\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 285.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 285.6px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 285.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 100 mL\/each (single or dual jar depends on the milling stations). The effectively processing capacity is 15-500 mL.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide, and Agate. (The milling jars are not included in the standard package and please purchase it as accessories additionally. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Disks: \u003ca href=\"https:\/\/echemsupplies.com\/products\/efmavdmmd500?variant=47546520338662\"\u003eEFMAVDMMD500\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e   \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVDMMD500-SS304_100x100.png?v=1776395492\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVDMMD500-ZrO2_100x100.png?v=1776395492\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVDMMD500-WC_100x100.png?v=1776395492\"\u003e  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMAVDMMD500-Agate_100x100.png?v=1776395492\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 15 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u0026lt;20 um\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL780 * W650 * H1080 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~228 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0301679X17302062\"\u003eP. Plescia, et al., Analysis of friction coefficients in a vibrating cup mill (ring mill) during grinding, Tribology International, 2017, 114, 458-468\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0921883120304271\"\u003eM. Truee, et al., Measurement and evaluation of the grinding bodies’ motions in a vibratory disc mill filled with viscous fluids, Advanced Powder Technology, 2020, 31, 4376-4389\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Single Milling State","offer_id":47546510639334,"sku":"EFMDCVMSS","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Double Milling Stations","offer_id":47546510672102,"sku":"EFMDCVMDS","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Four Milling Stations","offer_id":47546542915814,"sku":"EFMDCVM4S","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFMDCVM_main.png?v=1776394633"},{"product_id":"efldcvm","title":"ECS-FL Disk\/Cup Vibratory Mill (1500 rpm, 2 L), EFLDCVM","description":"\u003cp\u003eA Vibratory Disk Mill (also commonly known as a Vibratory Cup Mill or Shatterbox) is a high-speed pulverizer designed to reduce hard, brittle, or fibrous materials to analytical fineness—typically sub-75 microns—in less than two minutes.\u003c\/p\u003e\n\u003cp\u003eThe mill uses a \"puck and ring\" system housed inside a heavy, reinforced grinding set (the \"cup\"). (1) \u003cstrong\u003eAction\u003c\/strong\u003e: The machine utilizes a powerful motor to create high-frequency horizontal oscillations. This causes the internal grinding elements (a solid puck and often a hollow ring) to accelerate and strike the walls of the jar. (2) \u003cstrong\u003eForce\u003c\/strong\u003e: The material is pulverized through a combination of intense impact and extreme pressure\/friction as the puck and ring slide and collide. (3) \u003cstrong\u003eSpeed\u003c\/strong\u003e: Because the grinding elements are so heavy relative to the sample size, the energy density is incredibly high.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 697.4px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEFLDCVM (EFL-DCVM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC380V±10%, three phases, 50\/60Hz, 1500 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC220V±10%, three phases can be supplied upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eMilling Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVibratory grinding\/milling\u003c\/li\u003e\n\u003cli\u003eBoth dry\/wet milling can be operated\u003c\/li\u003e\n\u003cli\u003eMoving Mode: round motion\u003c\/li\u003e\n\u003cli\u003eMilling Plate Rotation Speed: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eMax. 1500 rpm\u003c\/span\u003e (adjustable).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMilling time can be set in 9999 min\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 227px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 227px;\"\u003e\u003cem\u003eMilling Jar (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e) Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 227px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: Max. 2 L (single disk). The effective processing capacity is 35-2000 mL. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eJar Materials: Stainless Steel, Zirconia, Tungsten Carbide. (The milling jars are not included in the standard package and please purchase it as accessories additionally. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard Milling Disks: \u003ca href=\"https:\/\/echemsupplies.com\/products\/eflavdmmd2000?variant=47546636140774\"\u003eEFLAVDMMD2000\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVDMMD2000-SS304_02_100x100.png?v=1776402363\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVDMMD2000-ZrO2_100x100.png?v=1776402363\" alt=\"\" style=\"float: none;\"\u003e   \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLAVDMMD2000-WC_100x100.png?v=1776402363\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eParticle Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax size of feeding powder: \u0026lt; 20 mm\u003c\/li\u003e\n\u003cli\u003eOutput Power size after milling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u0026lt;20 um\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL740 * W640 * H1110 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~235 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0301679X17302062\"\u003eP. Plescia, et al., Analysis of friction coefficients in a vibrating cup mill (ring mill) during grinding, Tribology International, 2017, 114, 458-468\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0921883120304271\"\u003eM. Truee, et al., Measurement and evaluation of the grinding bodies’ motions in a vibratory disc mill filled with viscous fluids, Advanced Powder Technology, 2020, 31, 4376-4389\u003c\/a\u003e\u003c\/p\u003e","brand":"FKS","offers":[{"title":"Default Title","offer_id":47546629128422,"sku":"EFLDCVM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EFLDCVM_main.png?v=1776403085"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/EFSNOHEVBM_main.png?v=1776314746","url":"https:\/\/echemsupplies.com\/collections\/vibratory-ball-mills.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}