{"title":"Wet Mixers for Col Wet Electrode Fabrication","description":"\u003cp\u003e\u003cstrong\u003eWet mixers turn dry powders, binders, and solvents into a homogeneous, bubble-free electrode slurry — and the homogeneity you achieve here sets the ceiling for every coating, calendering, and cell-test result downstream.\u003c\/strong\u003e This collection groups the lab-scale wet-process mixers and slurry-conditioning tools used to prepare cathode (NCM, LFP, LMFP) and anode (graphite, Si\/C, LTO) pastes with PVDF\/NMP or aqueous CMC\/SBR binder systems.\u003c\/p\u003e\n\n\u003cp\u003eThe units listed here cover three functional roles in a wet-electrode workflow:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlanetary vacuum slurry mixers\u003c\/strong\u003e — dual-, three-, and four-shaft configurations that combine low-speed planetary \"folding\" of viscous paste with high-speed dispersion shafts that break down conductive-additive agglomerates (carbon black, CNTs). Vacuum operation suppresses entrained air, which is the dominant source of pinholes and coating streaks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-shear and oscillatory mills\u003c\/strong\u003e — nano sand mills and three-dimensional shaker mixer-mills used either upstream (pre-dispersing aggregated active material or conductive carbon) or as a finishing step to push particle-size distribution toward sub-micron and sub-100 nm regimes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlurry conditioning\u003c\/strong\u003e — vacuum slurry filters that remove residual agglomerates, undissolved gel, and stray fibers after mixing, so the slurry that reaches the coater has a narrow, defect-free particle distribution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSelection generally proceeds by viscosity and batch size rather than by chemistry. High-viscosity NMP\/PVDF cathode slurries and tough aqueous CMC\/SBR anode slurries both benefit from a dispersion shaft above roughly 1000 rpm and from a vacuum capable of degassing during the shear stage. Smaller working volumes (a few hundred milliliters) suit material-screening and formulation studies; multi-liter four-shaft systems are aimed at pilot-scale electrode runs and design-of-experiments work where throughput matters.\u003c\/p\u003e\n\n\u003cp\u003eIf you are formulating a new active material and need fine control over agglomerate breakdown, start with a \u003ca href=\"\/collections\/wet-electrode-fabrication-mixers\"\u003eplanetary vacuum mixer\u003c\/a\u003e sized to your batch; if you are pushing particle size into the nanometer regime, pair it with a sand mill or 3D shaker mill upstream. For the next stage of the workflow, see coaters and dryers; for dry-process equivalents, see \u003ca href=\"\/collections\/dry-electrode-fabrication\"\u003edry electrode fabrication\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"esshsdspvsm","title":"ECS-SS High-Speed (1500 rpm) Dual-Shaft Planetary Vacuum Slurry Mixer (50-1000 mL)- ESSHSDSPVSM","description":"\u003cp\u003eFor battery research and electrode preparation, selecting a high-speed vacuum slurry mixer is essential to achieve a homogeneous, agglomerate-free paste. Most lab-scale planetary mixers for this application offer speeds up to 1,500 RPM, which is critical for dispersing binders and active materials without introducing air bubbles.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable style=\"height: 616px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSHSDSPVSM (ESS-HSDSPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1300 W \u003c\/li\u003e\n\u003cli\u003eA 2000W transformer can be used for AC110V operation \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eStirring Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRotation Speed: 0-1500 rpm, 3 programmable segments for automatic mode\u003c\/li\u003e\n\u003cli\u003eRevolution Speed: 0-500 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 137.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 137.2px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 137.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar volumes, such as 50 mL, 100 mL, 200 mL, 500 mL, and 1000 mL are available options. \u003c\/li\u003e\n\u003cli\u003eEffective slurry volume processing: 20%-70% is highly recommended. \u003c\/li\u003e\n\u003cli\u003eFor the 50 mL mixing jar, only single shaft was design due to limited inner space\u003c\/li\u003e\n\u003cli\u003eThe Cooling and Heating (\u003cspan\u003e≤150 °C\u003c\/span\u003e) functions are available.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_03_100x100.png?v=1774639286\" style=\"float: none;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_04_100x100.png?v=1774639294\" style=\"float: none;\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 ~ -0.09 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL435 * W330 * H625 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~50 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Mixer + 50 mL Jar","offer_id":47489014563046,"sku":"ESSHSDSPVSM50","price":3999.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 100 mL Jar","offer_id":47489014595814,"sku":"ESSHSDSPVSM100","price":4499.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 200 mL Jar","offer_id":47489014628582,"sku":"ESSHSDSPVSM200","price":4599.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 500 mL Jar","offer_id":47489014661350,"sku":"ESSHSDSPVSM500","price":4699.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 1000 mL Jar","offer_id":47489014694118,"sku":"ESSHSDSPVSM1000","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSHSDSPVSM_main.png?v=1774655342"},{"product_id":"eredspvsm","title":"ECS-R Economic Dual-Shaft Planetary Vacuum Slurry Mixer (1000 rpm, 500 mL), EREDSPVSM","description":"\u003cp\u003eFor battery research and electrode preparation, selecting a high-speed vacuum slurry mixer is essential to achieve a homogeneous, agglomerate-free paste. Most lab-scale planetary mixers for this application offer speeds up to 1,500 RPM, which is critical for dispersing binders and active materials without introducing air bubbles.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable style=\"height: 625.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEREDSPVSM (ER-EDSPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 500 W\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1000 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 145.6px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax Speed: 1000 rpm, 4 programmable segments for automatic mode\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine Speed of Stirring Shaft: 5.4 m\/s\u003c\/li\u003e\n\u003cli\u003eLine Speed of Dispersing Impeller: 5.3 m\/s\u003c\/li\u003e\n\u003cli\u003eStirring Shaft Size: Φ35 mm\u003c\/li\u003e\n\u003cli\u003eDispersing Impeller: Φ34 mm\u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: Max. 12000 cP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 min\u003c\/li\u003e\n\u003cli\u003eCycle Times: 9999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 68px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 68px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 68px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar volume: 500 mL (other volumes of 250 mL and 1 L with dual-shaft planetary design, as well as 50, 100, 150 mL with single mixing impeller are available upon request)\u003c\/li\u003e\n\u003cli\u003eThe dual-shaft design is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM_02_100x100.png?v=1779083290\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -85 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL330 * W320 * H570 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~27 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47489133052134,"sku":"ETSMSDSPVSM","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM.png?v=1779083289"},{"product_id":"etmtspvsm","title":"ECS-TM Three-Shaft (Two Mixing, One Dispersing) Planetary Vacuum Slurry Mixer (2-10 L)- ETMTSPVSM","description":"\u003cp\u003eFor high-viscosity electrode pastes and advanced battery research, a three-shaft vacuum slurry mixer (often called a planetary dispersive mixer) is the professional standard. Unlike standard mixers, these units combine low-speed planetary folding with high-speed shear dispersion to break down tough agglomerates in binders like PVDF or carboxymethyl cellulose (CMC).\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM10L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~2000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~4000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~5500 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Barrel \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 1.2-2.0 L (design volume is 3.8 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 180 mm, Depth: 150 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/8\". \u003c\/li\u003e\n\u003cli\u003eNo discharge valve at the bottom of the barrel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 2.7-5.0 L (design volume is 8.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D.240 mm, Depth: 180 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/4\". \u003c\/li\u003e\n\u003cli\u003eG1-1\/2\" discharge valve is available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 5.0-10.0 L (design volume is 16 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 310 mm, Depth: 220 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G1\/2\". \u003c\/li\u003e\n\u003cli\u003eG 1\" discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 750 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 94 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 8-76 rpm (line speed: 0.03-0.37m\/s, Planetary revolution speed: 5-52 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 6 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2-3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 1500 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 124 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 10-98 rpm (line speed: 0.06-0.60m\/s; Planetary revolution speed: 5-50 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 6.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2-3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 2200 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 161 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 10-100 rpm (line speed: 0.08-0.80m\/s; Planetary revolution speed: 5-50 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 7.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 450-4450 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.3-13 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 450-4450 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.3-13 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 2200 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 70 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 610-6100 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 2.2-22 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSpatula\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1300mm×W550mm×H1600mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1463mm×W610mm×H1770mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1500mm×W650mm×H1800mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~600 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~700 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~800 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"TOB","offers":[{"title":"2 L","offer_id":47491632562406,"sku":"ETMTSPVSM2L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"5 L","offer_id":47491632595174,"sku":"ETMTSPVSM5L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"10 L","offer_id":47491632627942,"sku":"ETMTSPVSM10L","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_main.png?v=1774655998"},{"product_id":"etsdsmdpvsm","title":"ECS-TS Dual-Shaft (Mixing + Dispersing) Planetary Vacuum Slurry Mixer (1000 mL)- ETSDSMDPVSM","description":"\u003cp\u003eFor high-viscosity laboratory slurries, a three-shaft or dual-shaft vacuum mixer is the standard for achieving a truly homogeneous, bubble-free dispersion. These systems combine low-speed \"folding\" of the bulk material with high-speed \"shearing\" to break down microscopic agglomerates.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eETSDSMDPVSM (ETS-DSMDPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~2000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMixing Barrel\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 0.7-2.1 L (design volume is 2.1 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 164 mm, Depth: 100 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/8\". \u003c\/li\u003e\n\u003cli\u003eUpper barrel section: (1) 1pcs DN50 for powder feeding port; (2) 1 pcs DN50 for observation mirror port; (3) 1 pcs 1\/2\" port for liquid feeding. (4) Vacuum port size is G1\/2\"; (5) One exhaust port for vacuum pump connection; (6) One port for digital vacuum gauge installation. \u003c\/li\u003e\n\u003cli\u003eBottom barrel section: traverse distance ≤212mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSDSMDPVSM_02_160x160.png?v=1774659514\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 550 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (1 pcs): SS304, Spiral twist type, 90° helix, diameter: 83 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 5-40 rpm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: 2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 580-58000 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.8-18 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSpatula\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for slurry viscosity is \u0026lt;1.2 million cP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500 * W350 * H320 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"TOB","offers":[{"title":"Default Title","offer_id":47489220444390,"sku":"ETSDSMDPVSM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSDSMDPVSM_main.png?v=1774659166"},{"product_id":"esmfspvsm","title":"ECS-SM Four-Shaft (Two Mixing, Two Dispersing) Planetary Vacuum Slurry Mixer (2-10 L)- ESMFSPVSM","description":"\u003cp\u003eA four-shaft planetary vacuum mixer—specifically configured with two mixing (stirring) shafts and two dispersing shafts—is the gold standard for achieving sub-micron particle distribution and bubble-free homogeneity. In this setup, the mixing shafts handle the bulk movement and \"folding\" of the paste, while the high-speed dispersing shafts provide the intense shear required to break down conductive additive agglomerates (like CNTs or Carbon Black).\u003c\/p\u003e\n\u003cp\u003eIt is a precise laboratory unit designed for complex slurry preparation. It utilizes a rotation + revolution method where all four shafts revolve around the tank while spinning on their own axes, ensuring zero \"dead zones.\" (1) \u003cstrong\u003eDispersion Power\u003c\/strong\u003e: Two high-speed shafts reaching 0–3800 RPM for aggressive particle size reduction. (2) \u003cstrong\u003eStirring Efficiency\u003c\/strong\u003e: Two low-speed twist blades (2–112 RPM) move the bulk material from the walls to the dispersers. (3) \u003cstrong\u003eIntegrated Cooling\u003c\/strong\u003e: Includes a 9L water chiller to counteract the heat generated by the high-speed shafts, protecting sensitive binders like PVDF. (4) \u003cstrong\u003eSafety\u003c\/strong\u003e: PLC control with an observation window to monitor slurry consistency in real-time\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM10L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~3000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~5000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~7000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Barrel \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~2.0 L (design volume is 3.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 180 mm, Depth: 130 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available.\u003c\/li\u003e\n\u003cli\u003eA discharge valve is designed at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~5.0 L (design volume is 8.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D.240 mm, Depth: 180 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. \u003c\/li\u003e\n\u003cli\u003eA discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~10 L (design volume is 12 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 310 mm, Depth: 220 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available.\u003c\/li\u003e\n\u003cli\u003eA discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 2-112 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed:2-112 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 2-110 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-3800 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-6900 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-6000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSpatula\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSlurry Viscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL930mm×W1120mm×H1400mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL960mm×W1150mm×H2050mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL990mm×W1200mm×H2000mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~360 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~550 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~650 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"2 L","offer_id":47491649274086,"sku":"ESMFSPVSM2L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"5 L","offer_id":47491649306854,"sku":"ESMFSPVSM5L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"10 L","offer_id":47491649339622,"sku":"ESMFSPVSM10L","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_main.png?v=1774759233"},{"product_id":"essvsf","title":"ECS-SS Vacuum Slurry Filter (500mL or 2L), ESSVSF","description":"\u003cp\u003eFor laboratory battery research, a vacuum slurry filter is used immediately after mixing to remove agglomerates, undissolved gels, and extraneous particles. This ensures a \"narrow\" particle size distribution, which is critical for achieving a uniform, defect-free coating on your current collectors.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSVSF (ESS-VSF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 5-12 W\u003c\/li\u003e\n\u003cli\u003eA DC12V converter is included. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry Tank Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTank material is made of SS304\u003c\/li\u003e\n\u003cli\u003eCapacity has two versions: 750 mL and 2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMesh Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMesh 100 and 200 are included.\u003c\/li\u003e\n\u003cli\u003eMesh 150, 250, 300, 400, and 500 are available upon request. \u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e-65 KPa (a small dry-air vacuum pump is included.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL150 * W150 * H200 mm for 500 mL version\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eL150 * W150* H200 mm for 500 mL version for 2 L version\u003c\/li\u003e\n\u003cli\u003eVacuum pump size: L140 * W70* H150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL710 * W560 * H550 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~4 kg for 500 mL version\u003c\/li\u003e\n\u003cli\u003e~7 kg for 2 L version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/0957-4484\/20\/23\/235203\/meta\"\u003eJ. H. Lee, et al., Tin nanoparticle thin film electrodes fabricated by the vacuum filtration method for enhanced battery performance, Nanotechnology, 2009, 20, 235203\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.iecr.3c03586\"\u003eM. H. Jeong, et al., High-Speed Li-Ion Battery Manufacturing Process Applying the Dewatering Concept, Ind. Eng. Chem. Res. 2024, 63, 10, 4408–4419\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"500 mL","offer_id":47507923960038,"sku":"ESSVSF500","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"2 L","offer_id":47507923992806,"sku":"ESSVSF2000","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSVSF_main.png?v=1775176470"},{"product_id":"ermhsdm","title":"ECS-R Mini High-Speed (Max. 10000 rpm) Dispensing Mixer (300 mL), ERMHSDM","description":"\u003cp\u003eA 10,000 RPM High-Speed Dispersing Mixer (often called a high-speed dissolver or homogenizer) is a precision laboratory or pilot-scale instrument designed to break down agglomerates, wet out solid powders into liquids, and create highly stable suspensions or emulsions. At 10,000 RPM, the tip speed of the blade creates immense shear forces, which is particularly critical when preparing high-viscosity slurries, such as those used in advanced battery electrodes, fuel cell inks, or ceramic suspensions.\u003c\/p\u003e\n\u003cp\u003eUnlike a standard paddle mixer that simply circulates material, a dispersing mixer relies on hydraulic shear. (1) \u003cstrong\u003eSawtooth Blade (Cowles Dissolver)\u003c\/strong\u003e: The most common geometry is a flat blade with directional \"teeth\" along the edge. (2) \u003cstrong\u003eSuction Effect\u003c\/strong\u003e: As the blade rotates at high speeds (up to 10,000 RPM), it draws liquid and solids toward the center of the disc and flings them outward radially. (3) \u003cstrong\u003eHigh-Shear Zone\u003c\/strong\u003e: The highest shear occurs just millimeters away from the edges of the teeth. This velocity gradient tears apart agglomerated particles (like carbon black, carbon nanotubes, or active material powders) and forces them into a uniform state.\u003c\/p\u003e\n\u003ctable style=\"height: 469.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERMHSDM (ER-MHSDM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eDispersing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e100-10000 rpm\u003c\/li\u003e\n\u003cli\u003eThe maximum line speed is 33.49 m\/s\u003c\/li\u003e\n\u003cli\u003eDiameter of Dispersing Blade: Φ64 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-300 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 10px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 10px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 300 mL    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_03_100x100.png?v=1774639286\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_04_100x100.png?v=1774639294\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL250 * W295 * H430 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~10 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47686533578982,"sku":"ERMHSDM","price":6999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERMHSDM_main.png?v=1779075699"},{"product_id":"eressvsm","title":"ECS-R Economic Single-Shaft Vacuum Slurry Mixer (1400 rpm, 250 mL), ERESSVSM","description":"\u003cp\u003eAn economic vacuum slurry mixer (often referred to as a compact or benchtop vacuum mixer) is a staple for laboratory-scale R\u0026amp;D and small-scale prototyping, particularly for battery electrode preparation (lithium-ion, sodium-ion, solid-state) and ceramic slurries. When searching for an \"economic\" model, the goal is to balance affordability with the two features critical to slurry quality: effective de-agglomeration (homogenization) and void-free degassing (vacuum).\u003c\/p\u003e\n\u003cp\u003eIn an economic single-shaft setup, the design is simplified to minimize mechanical failure points and reduce manufacturing costs: (1) \u003cstrong\u003eVacuum Cap\/Lid\u003c\/strong\u003e: The mixing shaft passes through a specialized high-speed dynamic seal (usually an oil seal or mechanical face seal) embedded in a heavy-duty lid. This lid clamps securely onto the mixing cup using a silicone or Viton O-ring. (2) \u003cstrong\u003eHigh-Shear Dispersion\u003c\/strong\u003e: The single shaft spins at high velocities (typically 100 to 5,000+ RPM). The sawtooth blade flings the slurry radially outward, creating a vortex that pulls dry powders down into the high-shear zone for rapid wetting and de-agglomeration. (3) \u003cstrong\u003eSimultaneous Degassing\u003c\/strong\u003e: Connectors on the lid attach to a vacuum line. Drawing a vacuum (typically -0.08 to -0.095 MPa) while the vortex is active allows entrapped air bubbles to expand, rise to the surface, and burst instantly, ensuring a highly dense, defect-free slurry for downstream coating.\u003c\/p\u003e\n\u003ctable style=\"height: 844.6px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERESSVSM (ER-ESSVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 150 W\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1000 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax Speed: 1400 rpm, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-9999 min\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 385.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 385.4px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 385.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel Jar volume: 250 mL (other volumes of 50, 100, 150 mL with single mixing shaft\/impeller are available upon request)\u003c\/li\u003e\n\u003cli\u003eFor 250 mL mixing jar, the dual-shaft design with stirring and dispersing features is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg height=\"88\" width=\"88\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM_02_100x100.png?v=1779083290\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor 50, 100, and 150 mL mixing jars, the single shaft with stirring impeller is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERESSVSM_02_100x100.png?v=1779090463\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -80 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL245 * W260 * H490 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~14 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47688186593510,"sku":"ERESSVSM","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERESSVSM_main.png?v=1779090327"},{"product_id":"erepvcm","title":"ECS-R Economic Planetary Vacuum Centrifugal Mixer (2000 rpm, 2*150 or 2*300 mL), EREPVCM","description":"\u003cp\u003eA Planetary Vacuum Centrifugal Mixer (often called a dual-asymmetric centrifugal mixer or a bladeless mixer) represents the pinnacle of premium mixing technology for highly viscous, sensitive, or hard-to-disperse materials. Unlike traditional mixers that use a spinning blade to shear material, a planetary centrifugal mixer uses no blades. Instead, it relies on the physics of dual-axis rotation combined with a deep vacuum to simultaneously mix, de-agglomerate, and completely de-aerate materials within minutes.\u003c\/p\u003e\n\u003cp\u003eThe planetary vacuum machine operates on a dual-rotation mechanism mimicking planetary motion: (1) \u003cstrong\u003eRevolution (The \"Orbit\")\u003c\/strong\u003e: The container holder revolves around a central axis at high speed, generating massive centrifugal force (often exceeding 400 times g). This forces the material outward and downward against the walls of the mixing cup. (2) \u003cstrong\u003eRotation (The \"Spin\")\u003c\/strong\u003e: Simultaneously, the container spins on its own axis at a specific ratio (typically around 1:1 or 2:3 relative to the revolution speed).\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 769.3px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEREPVCM (ER-EPVCM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 500 W (2*150 mL), or 1350 W (2*300 mL)\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1500 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRevolution Speed: Max. 2000 rpm (line speed: 5.4 m\/s), adjustable\u003c\/li\u003e\n\u003cli\u003eSelf-Rotation Speed: 0.5 times of revolution speed, Max. 1000 rpm\u003c\/li\u003e\n\u003cli\u003eA 400\/750 W servo motor is used to drive the mixing impeller. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 s for three-segments (each segment is 200 s). \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 212.1px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 212.1px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 212.1px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel Jar Volume: (1) 2*150 mL, its size is Ф60*H75 mm; (2) 2*300 mL, its size is Ф77*H58 mm;\u003c\/li\u003e\n\u003cli\u003eOther smaller volumes of 10, 30, 50 mL, and 100 mL are available upon request)\u003c\/li\u003e\n\u003cli\u003eMax processing capacity is 2*150 g or 2*300 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_02_100x100.png?v=1779111199\"\u003e        \u003cimg height=\"66\" width=\"90\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_03_100x100.png?v=1779111200\"\u003e         \u003cimg height=\"79\" width=\"45\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_04_100x100.png?v=1779169240\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn external vacuum pump (eg: \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is needed for creating ideal vacuum conditions\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -95 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) L370 * W300 * H490 mm (Antechamber and Glovebox-Compatible) for 2*150 mL version\u003c\/li\u003e\n\u003cli\u003e(2) L400 * W580 * H590 mm (Glovebox-Compatible) for 2*300 mL version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~43 kg for 2*150 mL version\u003c\/li\u003e\n\u003cli\u003e~80 kg for 2*300 mL version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"2*150 mL","offer_id":47691269472486,"sku":"EREPVCM300","price":5299.0,"currency_code":"USD","in_stock":true},{"title":"2*300 mL","offer_id":47691269505254,"sku":"EREPVCM600","price":8299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_main.png?v=1779093562"},{"product_id":"erecpvcmts","title":"ECS-S Compact Planetary Vacuum Centrifugal Mixer (2000 rpm, 2*150 mL) with HMI Touch Screen, ERECPVCMTS","description":"\u003cp\u003eA Planetary Vacuum Centrifugal Mixer (often called a dual-asymmetric centrifugal mixer or a bladeless mixer) represents the pinnacle of premium mixing technology for highly viscous, sensitive, or hard-to-disperse materials. Unlike traditional mixers that use a spinning blade to shear material, a planetary centrifugal mixer uses no blades. Instead, it relies on the physics of dual-axis rotation combined with a deep vacuum to simultaneously mix, de-agglomerate, and completely de-aerate materials within minutes.\u003c\/p\u003e\n\u003cp\u003eThe planetary vacuum machine operates on a dual-rotation mechanism mimicking planetary motion: (1) \u003cstrong\u003eRevolution (The \"Orbit\")\u003c\/strong\u003e: The container holder revolves around a central axis at high speed, generating massive centrifugal force (often exceeding 400 times g). This forces the material outward and downward against the walls of the mixing cup. (2) \u003cstrong\u003eRotation (The \"Spin\")\u003c\/strong\u003e: Simultaneously, the container spins on its own axis at a specific ratio (typically around 1:1 or 2:3 relative to the revolution speed).\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 704.3px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERECPVCMTS (ER-ECPVCMTS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 21.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 21.8px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 21.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1000 W (2*150 mL)\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1500 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRevolution Speed: Max. 2000 rpm, adjustable\u003c\/li\u003e\n\u003cli\u003eLow Speed Range of 10-1500 rpm, continuous\u003c\/li\u003e\n\u003cli\u003eHigh Speed Range: 1500-2000 rpm, last for 7.5 min \u003c\/li\u003e\n\u003cli\u003eSelf-Rotation Speed: 0.6 times of revolution speed, Max. 1200 rpm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHMI Touch Screen\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll the critical parameters can be set and monitored in the HMI touch screen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERECPVCMTS_02_100x100.png?v=1779163810\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1-999 s, three segments, adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 212.1px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 212.1px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 212.1px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: 2*150 mL, PA66\u003c\/li\u003e\n\u003cli\u003eEffective Processing Capacity: 75 mL for each jar\u003c\/li\u003e\n\u003cli\u003eA smaller volume of 30 mL\/jar with effective processing capacity 15 mL can be supplied upon request. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_02_100x100.png?v=1779111199\"\u003e        \u003cimg height=\"66\" width=\"90\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_03_100x100.png?v=1779111200\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERECPVCMTS_03_100x100.png?v=1779164007\" alt=\"\" style=\"float: none;\" width=\"90\" height=\"69\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not\u003c\/span\u003e \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eincluded)\u003c\/span\u003e\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn external vacuum pump (eg: \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is needed for creating ideal vacuum conditions\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -95 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL430 * W310 * H460 mm (Glovebox-Compatible, brushless motor)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~60 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47692763037926,"sku":"ERECPVCMTS","price":9999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERECPVCMTS_main.png?v=1779163811"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/ESSHSDSPVSM_main.png?v=1776020269","url":"https:\/\/echemsupplies.com\/collections\/wet-electrode-fabrication-mixers.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}