{"title":"Wet Electrode Fabrication","description":"\u003cp\u003e\u003cstrong\u003eWet electrode fabrication is the slurry-based route that still produces the vast majority of lithium-ion, sodium-ion, and adjacent battery electrodes — and on a pilot line every step in this collection compounds: a poorly mixed slurry cannot be rescued by a perfect calender, and a perfectly densified electrode that retains residual moisture will still gas in the first cycle.\u003c\/strong\u003e This collection groups the four equipment families that move active material from powder to assembly-ready electrode, in the order a researcher actually uses them.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/wet-mixers\"\u003eWet Mixers\u003c\/a\u003e\u003c\/strong\u003e — planetary vacuum slurry mixers, three-dimensional shaker mixers, nano sand mills, and vacuum slurry filters that turn powders, binders, and solvents into a homogeneous, agglomerate-free paste. Choose shaft count and dispersion intensity by binder system (PVDF\/NMP vs aqueous CMC\/SBR) and by whether carbon nanotubes or sub-micron actives are in the formulation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/tape-casting-coaters\"\u003eTape Casting Coaters\u003c\/a\u003e\u003c\/strong\u003e — benchtop and pilot doctor-blade coaters with vacuum chucks, infrared or top\/bottom heating, and multi-head chassis that accept doctor blade, wire rod, or slot die. Used for sheet-fed electrode coupons, ceramic green tapes, and functional separator or catalyst coatings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/rolling-presses\"\u003eRolling Presses\u003c\/a\u003e\u003c\/strong\u003e — cold and hot calenders, synchronous and asynchronous-speed rollers, and steel or rubber nips for densifying coated foils, fibrillating PTFE in dry-process electrodes, and laminating membranes to electrodes. The single piece of equipment that most directly shapes cycle life and rate capability.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/vacuum-ovens-for-wet-electrode-fabrication\"\u003eVacuum Ovens\u003c\/a\u003e\u003c\/strong\u003e — single- and multi-chamber ovens from 100-150 degC standard service up to 200-250 degC high-vacuum models, used to drive bound water out of binder networks and porous coatings before glovebox transfer and cell assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you are setting up a new wet electrode line, walk the list top-to-bottom: a planetary vacuum mixer sized to your batch, a vacuum-bed tape casting coater for your foil width, a pressure-controlled calender, and a multi-chamber vacuum oven so anode and cathode recipes can dry in parallel. For dry-process electrodes that skip the slurry step, see asynchronous-speed presses under \u003ca href=\"\/collections\/rolling-presses\"\u003eRolling Presses\u003c\/a\u003e; for the broader equipment landscape, see \u003ca href=\"\/collections\/battery-equipment\"\u003eBattery Equipment\u003c\/a\u003e.\u003c\/p\u003e\n","products":[{"product_id":"esshsdspvsm","title":"ECS-SS High-Speed (1500 rpm) Dual-Shaft Planetary Vacuum Slurry Mixer (50-1000 mL)- ESSHSDSPVSM","description":"\u003cp\u003eFor battery research and electrode preparation, selecting a high-speed vacuum slurry mixer is essential to achieve a homogeneous, agglomerate-free paste. Most lab-scale planetary mixers for this application offer speeds up to 1,500 RPM, which is critical for dispersing binders and active materials without introducing air bubbles.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable style=\"height: 616px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSHSDSPVSM (ESS-HSDSPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1300 W \u003c\/li\u003e\n\u003cli\u003eA 2000W transformer can be used for AC110V operation \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eStirring Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRotation Speed: 0-1500 rpm, 3 programmable segments for automatic mode\u003c\/li\u003e\n\u003cli\u003eRevolution Speed: 0-500 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 137.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 137.2px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 137.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar volumes, such as 50 mL, 100 mL, 200 mL, 500 mL, and 1000 mL are available options. \u003c\/li\u003e\n\u003cli\u003eEffective slurry volume processing: 20%-70% is highly recommended. \u003c\/li\u003e\n\u003cli\u003eFor the 50 mL mixing jar, only single shaft was design due to limited inner space\u003c\/li\u003e\n\u003cli\u003eThe Cooling and Heating (\u003cspan\u003e≤150 °C\u003c\/span\u003e) functions are available.\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_03_100x100.png?v=1774639286\" style=\"float: none;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_04_100x100.png?v=1774639294\" style=\"float: none;\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 ~ -0.09 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL435 * W330 * H625 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~50 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Mixer + 50 mL Jar","offer_id":47489014563046,"sku":"ESSHSDSPVSM50","price":3999.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 100 mL Jar","offer_id":47489014595814,"sku":"ESSHSDSPVSM100","price":4499.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 200 mL Jar","offer_id":47489014628582,"sku":"ESSHSDSPVSM200","price":4599.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 500 mL Jar","offer_id":47489014661350,"sku":"ESSHSDSPVSM500","price":4699.0,"currency_code":"USD","in_stock":true},{"title":"Mixer + 1000 mL Jar","offer_id":47489014694118,"sku":"ESSHSDSPVSM1000","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSHSDSPVSM_main.png?v=1774655342"},{"product_id":"eredspvsm","title":"ECS-R Economic Dual-Shaft Planetary Vacuum Slurry Mixer (1000 rpm, 500 mL), EREDSPVSM","description":"\u003cp\u003eFor battery research and electrode preparation, selecting a high-speed vacuum slurry mixer is essential to achieve a homogeneous, agglomerate-free paste. Most lab-scale planetary mixers for this application offer speeds up to 1,500 RPM, which is critical for dispersing binders and active materials without introducing air bubbles.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable style=\"height: 625.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEREDSPVSM (ER-EDSPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 500 W\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1000 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 145.6px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax Speed: 1000 rpm, 4 programmable segments for automatic mode\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine Speed of Stirring Shaft: 5.4 m\/s\u003c\/li\u003e\n\u003cli\u003eLine Speed of Dispersing Impeller: 5.3 m\/s\u003c\/li\u003e\n\u003cli\u003eStirring Shaft Size: Φ35 mm\u003c\/li\u003e\n\u003cli\u003eDispersing Impeller: Φ34 mm\u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: Max. 12000 cP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 min\u003c\/li\u003e\n\u003cli\u003eCycle Times: 9999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 68px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 68px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 68px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar volume: 500 mL (other volumes of 250 mL and 1 L with dual-shaft planetary design, as well as 50, 100, 150 mL with single mixing impeller are available upon request)\u003c\/li\u003e\n\u003cli\u003eThe dual-shaft design is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM_02_100x100.png?v=1779083290\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -85 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL330 * W320 * H570 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~27 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47489133052134,"sku":"ETSMSDSPVSM","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM.png?v=1779083289"},{"product_id":"etmtspvsm","title":"ECS-TM Three-Shaft (Two Mixing, One Dispersing) Planetary Vacuum Slurry Mixer (2-10 L)- ETMTSPVSM","description":"\u003cp\u003eFor high-viscosity electrode pastes and advanced battery research, a three-shaft vacuum slurry mixer (often called a planetary dispersive mixer) is the professional standard. Unlike standard mixers, these units combine low-speed planetary folding with high-speed shear dispersion to break down tough agglomerates in binders like PVDF or carboxymethyl cellulose (CMC).\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eETMTSPVSM10L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~2000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~4000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~5500 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Barrel \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 1.2-2.0 L (design volume is 3.8 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 180 mm, Depth: 150 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/8\". \u003c\/li\u003e\n\u003cli\u003eNo discharge valve at the bottom of the barrel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 2.7-5.0 L (design volume is 8.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D.240 mm, Depth: 180 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/4\". \u003c\/li\u003e\n\u003cli\u003eG1-1\/2\" discharge valve is available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 5.0-10.0 L (design volume is 16 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 310 mm, Depth: 220 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G1\/2\". \u003c\/li\u003e\n\u003cli\u003eG 1\" discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 750 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 94 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 8-76 rpm (line speed: 0.03-0.37m\/s, Planetary revolution speed: 5-52 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 6 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2-3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 1500 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 124 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 10-98 rpm (line speed: 0.06-0.60m\/s; Planetary revolution speed: 5-50 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 6.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2-3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 2200 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix, diameter: 161 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 10-100 rpm (line speed: 0.08-0.80m\/s; Planetary revolution speed: 5-50 rpm)\u003c\/li\u003e\n\u003cli\u003eStirring blade distance: 7.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.0 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: ~2.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_02_160x160.png?v=1774678464\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 450-4450 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.3-13 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 450-4450 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.3-13 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 2200 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 70 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 610-6100 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 2.2-22 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSpatula\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1300mm×W550mm×H1600mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1463mm×W610mm×H1770mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL1500mm×W650mm×H1800mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~600 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~700 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~800 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"TOB","offers":[{"title":"2 L","offer_id":47491632562406,"sku":"ETMTSPVSM2L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"5 L","offer_id":47491632595174,"sku":"ETMTSPVSM5L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"10 L","offer_id":47491632627942,"sku":"ETMTSPVSM10L","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTSPVSM_main.png?v=1774655998"},{"product_id":"etsdsmdpvsm","title":"ECS-TS Dual-Shaft (Mixing + Dispersing) Planetary Vacuum Slurry Mixer (1000 mL)- ETSDSMDPVSM","description":"\u003cp\u003eFor high-viscosity laboratory slurries, a three-shaft or dual-shaft vacuum mixer is the standard for achieving a truly homogeneous, bubble-free dispersion. These systems combine low-speed \"folding\" of the bulk material with high-speed \"shearing\" to break down microscopic agglomerates.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate slurry mixer: (1) \u003cstrong\u003eMixing Speed\u003c\/strong\u003e: The unit offers at least 600–1400 RPM if you are working with high-viscosity slurries or difficult-to-disperse binders like PVDF or CMC\/SBR. (2) \u003cstrong\u003eVacuum Level\u003c\/strong\u003e: To effectively eliminate bubbles, the mixer should maintain a vacuum of at least -0.098 MPa for the duration of the cycle. (3) \u003cstrong\u003eTemperature Control\u003c\/strong\u003e: High-speed mixing can generate significant heat. Units with water-cooled jackets help prevent the degradation of temperature-sensitive binders\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eETSDSMDPVSM (ETS-DSMDPVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~2000 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eMixing Barrel\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: 0.7-2.1 L (design volume is 2.1 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 164 mm, Depth: 100 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. The connection port size is G3\/8\". \u003c\/li\u003e\n\u003cli\u003eUpper barrel section: (1) 1pcs DN50 for powder feeding port; (2) 1 pcs DN50 for observation mirror port; (3) 1 pcs 1\/2\" port for liquid feeding. (4) Vacuum port size is G1\/2\"; (5) One exhaust port for vacuum pump connection; (6) One port for digital vacuum gauge installation. \u003c\/li\u003e\n\u003cli\u003eBottom barrel section: traverse distance ≤212mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSDSMDPVSM_02_160x160.png?v=1774659514\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMixing motor power: 550 W. \u003c\/li\u003e\n\u003cli\u003eMaxing blade (1 pcs): SS304, Spiral twist type, 90° helix, diameter: 83 mm\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 5-40 rpm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel wall: 3.5 mm\u003c\/li\u003e\n\u003cli\u003eDistance between mixing blade and barrel bottom: 2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing motor power: 1100 W\u003c\/li\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304, diameter: 60 mm\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 580-58000 rpm\u003c\/li\u003e\n\u003cli\u003eDispersing line speed: 1.8-18 m\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSpatula\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for slurry viscosity is \u0026lt;1.2 million cP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500 * W350 * H320 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"TOB","offers":[{"title":"Default Title","offer_id":47489220444390,"sku":"ETSDSMDPVSM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSDSMDPVSM_main.png?v=1774659166"},{"product_id":"esmfspvsm","title":"ECS-SM Four-Shaft (Two Mixing, Two Dispersing) Planetary Vacuum Slurry Mixer (2-10 L)- ESMFSPVSM","description":"\u003cp\u003eA four-shaft planetary vacuum mixer—specifically configured with two mixing (stirring) shafts and two dispersing shafts—is the gold standard for achieving sub-micron particle distribution and bubble-free homogeneity. In this setup, the mixing shafts handle the bulk movement and \"folding\" of the paste, while the high-speed dispersing shafts provide the intense shear required to break down conductive additive agglomerates (like CNTs or Carbon Black).\u003c\/p\u003e\n\u003cp\u003eIt is a precise laboratory unit designed for complex slurry preparation. It utilizes a rotation + revolution method where all four shafts revolve around the tank while spinning on their own axes, ensuring zero \"dead zones.\" (1) \u003cstrong\u003eDispersion Power\u003c\/strong\u003e: Two high-speed shafts reaching 0–3800 RPM for aggressive particle size reduction. (2) \u003cstrong\u003eStirring Efficiency\u003c\/strong\u003e: Two low-speed twist blades (2–112 RPM) move the bulk material from the walls to the dispersers. (3) \u003cstrong\u003eIntegrated Cooling\u003c\/strong\u003e: Includes a 9L water chiller to counteract the heat generated by the high-speed shafts, protecting sensitive binders like PVDF. (4) \u003cstrong\u003eSafety\u003c\/strong\u003e: PLC control with an observation window to monitor slurry consistency in real-time\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMFSPVSM10L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~3000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~5000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, ~7000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Barrel \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~2.0 L (design volume is 3.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 180 mm, Depth: 130 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available.\u003c\/li\u003e\n\u003cli\u003eA discharge valve is designed at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~5.0 L (design volume is 8.0 L)\u003c\/li\u003e\n\u003cli\u003eI.D.240 mm, Depth: 180 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available. \u003c\/li\u003e\n\u003cli\u003eA discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEffective Volume: ~10 L (design volume is 12 L)\u003c\/li\u003e\n\u003cli\u003eI.D. 310 mm, Depth: 220 mm\u003c\/li\u003e\n\u003cli\u003eBarrel material is SS304 (SS316 can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eCooling jacket with water inlet and outlet are available.\u003c\/li\u003e\n\u003cli\u003eA discharge valve is available at the barrel bottom\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMixing Part\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 2-112 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed:2-112 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMaxing blade (2 pcs): SS304, Spiral twist type, 90° helix\u003c\/li\u003e\n\u003cli\u003eMixing blade speed: 2-110 rpm (suggested lower limit speed as 5 rpm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_02_160x160.png?v=1774759243\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDispersing Part\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-3800 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-6900 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eDispersing blade (1 pcs): SS304\u003c\/li\u003e\n\u003cli\u003eDispersing rotation speed: 100-6000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSpatula\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1 pcs of spatula was used to scratch the high viscosity slurry near the barrel wall and improve the mixing homogeneity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSlurry Viscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100000 mPa·s (cP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -0.08 MPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL930mm×W1120mm×H1400mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL960mm×W1150mm×H2050mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL990mm×W1200mm×H2000mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~360 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~550 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~650 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"2 L","offer_id":47491649274086,"sku":"ESMFSPVSM2L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"5 L","offer_id":47491649306854,"sku":"ESMFSPVSM5L","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"10 L","offer_id":47491649339622,"sku":"ESMFSPVSM10L","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMFSPVSM_main.png?v=1774759233"},{"product_id":"esstcchvb","title":"ECS-SS Tape Casting Coater with Heating Vacuum Bed (L200*W120 mm, 120℃), ESSTCCHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSTCCHVB (ESS-TCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 280 W \u003c\/li\u003e\n\u003cli\u003eA DC24V converter is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L200*W120mm, which enable the effective coating area is L190mm * W100 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-48 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eBottom Heating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(253, 8, 8);\"\u003eOptional\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Four Side Film Applicator with Fixed Gap\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            The standard one (effective coating width of 80mm) has four-side\u003c\/p\u003e\n\u003cp\u003e            gap of 100 um, 150 um, 200 um, and 250 um. Other options can\u003c\/p\u003e\n\u003cp\u003e            be found here (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003eESSAFSFAFG\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_02_160x160.png?v=1774764406\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003eESSAFAW80\u003c\/a\u003e)\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width is 80 mm and adjustable gap is 0-3 mm (resolution: 5 um).  \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_03_160x160.png?v=1774765217\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn individual pump with DC24V power input is included \u003c\/li\u003e\n\u003cli\u003e8 mm O.D. tubing connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL360 * W220 * H210 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~20 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Coater + Four-Side Film Applicator with Fix Gap","offer_id":47491696754918,"sku":"ESSTCCHVBFS","price":3499.0,"currency_code":"USD","in_stock":true},{"title":"Coater + Standard Film Applicator with Adjustable Gap","offer_id":47491696787686,"sku":"ESSTCCHVBS","price":3799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_main.png?v=1774767247"},{"product_id":"essmtccihcvb","title":"ECS-SS Multifunctional Tape Casting Coater (Doctor Blade, Slot Die, and Wire Rod) with Infrared Heating Cover (120℃) and Vacuum Bed (L230*W120 mm), ESSMTCCIHCVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), a tape casting coater with an infrared (IR) heating cover and vacuum bed provides a dual-advantage: the vacuum bed ensures the substrate stays perfectly flat during the stroke, while the IR cover enables rapid, uniform drying from the surface down. This is particularly effective for thick electrodes or ceramic tapes where \"skinning\" (trapped solvent under a dried surface layer) is a common defect\u003cspan style=\"font-size: 0.875rem;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSMTCCIHCVB (ESS-MTCCIHCVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1300 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be customized upon request or equipped with a 2000W transformer.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L230*W120mm, which enable the effective coating area is L220mm * W100 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1-30 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIR heating cover: Max. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eResistance heating bottom: Max. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eRealizing the simultaneous heating at the top and bottom. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(253, 8, 8);\"\u003eOptional\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Four Side Film Applicator with Fixed Gap\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            The standard one (effective coating width of 80mm) has four-side\u003c\/p\u003e\n\u003cp\u003e            gap of 100 um, 150 um, 200 um, and 250 um. Other options can\u003c\/p\u003e\n\u003cp\u003e            be found here (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003eESSAFSFAFG\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_02_100x100.png?v=1774764406\" alt=\"\" style=\"float: none;\" width=\"86\" height=\"86\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap, \u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003eESSAFAW80\u003c\/a\u003e\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width is 100 mm and adjustable gap is 0-3 mm (resolution: 5 um).  \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003cimg height=\"91\" width=\"91\" style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_03_100x100.png?v=1774765217\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 3\u003c\/strong\u003e: Hybrid Fim Applicator (Doctor + Slot Die), \u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47492745986278\"\u003eESSAHFAW80\u003c\/a\u003e  \u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width for the doctor blade is 100 mm and adjustable gap is 0-6 mm (resolution: 5 um)\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width for the slot die head is 80mm. The inside channel volume is 2 mL. The shims with thickness of 0.1, 0.2, 0.3, 0.4, 0.5 mm are included.  \u003c\/div\u003e\n \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 4\u003c\/strong\u003e: Wire Rod (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essawrw100?variant=47492793827558\"\u003eESSAWRW100\u003c\/a\u003e) \u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe maximum coating width for the wire rod (D=10mm) is 100 mm. \u003cstrong\u003eThe wire groove diameter \u003c\/strong\u003e(determine the coating width, not the physical rod diameter):  6 um, 8 um, 10 um, 12 um, 15 um, 20 um, 25 um, 30 um, 40 um, 50 um, 60 um, 80 um, 100 um, 150 um, and 200 um are available.\u003ca href=\"https:\/\/echemsupplies.com\/products\/essawrw100?variant=47492793827558\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCIHCVB_03_160x160.png?v=1774808616\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn individual vacuum pump is included for sucking the substrate on vacuum bed \u003c\/li\u003e\n\u003cli\u003e8 mm O.D. tubing connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL470 * W420 * H360 mm for main coater (\u003cstrong\u003eglovebox-compatible\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eL200 * W170 * H150 mm for vacuum pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~42 kg (36 kg for coater and 6 kg for vacuum pump)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/full\/10.1002\/ente.202000259\"\u003eR Diehm, et al., High-Speed Coating of Primer Layer for Li-Ion Battery Electrodes by Using Slot-Die Coating, Energy Technology, 2020, 8, 2000259\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eM. S. Kim, et al., Multifunctional Separator Coatings for High-Performance \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eLithium–Sulfur Batteries, Adv. Mater. Interfaces, 2016, 3, 1600450\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Coater + Four-Side Film Applicator with Fix Gap","offer_id":47492678254822,"sku":"ESSMTCCIHCVBFS","price":3899.0,"currency_code":"USD","in_stock":true},{"title":"Coater + Standard Film Applicator with Adjustable Gap","offer_id":47492678287590,"sku":"ESSMTCCIHCVDS","price":3999.0,"currency_code":"USD","in_stock":true},{"title":"Coater + Slot Die","offer_id":47492727210214,"sku":"ESSMTCCIHCVBSD","price":4399.0,"currency_code":"USD","in_stock":true},{"title":"Coater + Wire Rod","offer_id":47492727242982,"sku":"ESSMTCCIHCVBWR","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMTCCIHCVB_main.png?v=1774809795"},{"product_id":"esmtccihcvb","title":"ECS-SM Tape Casting Coater with Infrared Heating Cover (120℃) and Vacuum Bed (L270*W200 mm), ESMTCCIHCVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), a tape casting coater with an infrared (IR) heating cover and vacuum bed provides a dual-advantage: the vacuum bed ensures the substrate stays perfectly flat during the stroke, while the IR cover enables rapid, uniform drying from the surface down. This is particularly effective for thick electrodes or ceramic tapes where \"skinning\" (trapped solvent under a dried surface layer) is a common defect\u003cspan style=\"font-size: 0.875rem;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMTCCIHCVB (ESM-TCCIHCVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2200 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be customized upon request or equipped with a 3000W transformer.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L300*W200mm, which enable the effective coating area is L270mm * W150 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e20-120 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIR heating cover: Max. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eNo resistance heating at bottom, which is good for cooling process for double-side coating (after one side coating)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFilm Applicator with an Adjustable Width, \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmafaacw?variant=47492852416742\"\u003eESMAFAACW\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe maximum coating width is 150 mm, and adjustable coating width can be realized by moving the central plate. \u003c\/li\u003e\n\u003cli\u003eAdjustable gap: 0-3 mm (mechanical gauge, 10 um resolution). The digital gauge can be upgraded upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmafaacw?variant=47492852416742\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCIHCVB_02_100x100.png?v=1774820283\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn vacuum pump is built-in for sucking the substrate on vacuum bed \u003c\/li\u003e\n\u003cli\u003eVacuum level: -84 KPa, Max. flow rate: 30 L\/min, 120 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL670 * W370 * H370 mm for main coater (\u003cstrong\u003eglovebox-compatible\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eL540 * W260 * H430 mm for control box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~100 kg (70 kg for coater and 30 kg for control box)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eM. S. Kim, et al., Multifunctional Separator Coatings for High-Performance \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eLithium–Sulfur Batteries, Adv. Mater. Interfaces, 2016, 3, 1600450\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47492825940198,"sku":"ESMTCCIHCVB","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCIHCVB_main.png?v=1774819591"},{"product_id":"esmmtcchvb","title":"ECS-SM Multifunctional Tape Casting Coater (Doctor Blade + Wire Rod + Slot Die) with Heated Vacuum Bed (L200*W200 mm, 160°C), ESMMTCCHVB","description":"\u003cp\u003eA 3-in-1 (multifunctional) tape casting coater is designed to support doctor blade, wire rod, and slot die coating methods on a single machine. This versatility is perfect for labs that need to switch between high-viscosity battery pastes and ultra-thin, low-viscosity functional coatings.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMMTCCHVB (ESM-MTCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1000 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be customized upon request or equipped with a 1500W transformer.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe vacuum bed supports a coating area of L200*W200mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-70 mm\/s (adjustable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eBottom Resistance Heating\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBottom Heating Temperature: Max. 160 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eSmall vacuum holes: φ3 mm\u003c\/li\u003e\n\u003cli\u003eSurface Flatness: ≤5um\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Film Applicator with an Adjustable Width, \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmafaacw?variant=47492852416742\"\u003eESMAFAACW\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe maximum coating width is 150 mm, and adjustable coating width can be realized by moving the central plate. \u003c\/li\u003e\n\u003cli\u003eAdjustable gap: 0-3 mm (mechanical gauge, 10 um resolution). The digital gauge can be upgraded upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmafaacw?variant=47492852416742\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCIHCVB_02_100x100.png?v=1774820283\" style=\"margin-bottom: 16px; float: none;\" width=\"84\" height=\"84\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e(2) Wire Rod (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esmawrw200?variant=47492903174374\"\u003eESMAWRW200\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e) \u003c\/span\u003e\u003cbr\u003e\n\u003cdiv\u003eThe maximum coating width for the wire rod (D=10mm) is 200 mm (other coating widths also can be supplied upon request).\u003cspan\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eThe wire groove diameter\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(determine the coating width, not the physical rod diameter):  6 um, 8 um, 10 um, 12 um, 15 um, 20 um, 25 um, 30 um, 40 um, 50 um, 60 um, 80 um, 100 um, 150 um, and 200 um are available. Only \u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eTheoretically the dry coating thickness T = 0.5 * (wire groove diameter) * (transfer coefficient) * (solid-state content); Normally the transfer coefficient is in 0.5-0.7 and we will choose 0.6 as a typical value. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmawrw200?variant=47492903174374\"\u003e\u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCDWHVB_02_100x100.png?v=1774827354\" width=\"77\" height=\"77\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e(3) Slot Die (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47501068566758\"\u003eESSAHFASD200\u003c\/a\u003e)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e           The maximum slot die coating width is 200 mm. An economic syringe pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcepsp?variant=47501234307302\"\u003eEASDCEPSP\u003c\/a\u003e) can be used as the slurry feeder. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSAHFA_main_100x100.png?v=1776022370\" style=\"margin-bottom: 16px; float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCEPSP_main_100x100.png?v=1781726902\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn vacuum pump is externally connected for sucking the substrate on vacuum bed \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500 * W320 * H240 mm for main coater (\u003cstrong\u003eglovebox-compatible\u003c\/strong\u003e)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~40 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eM. S. Kim, et al., Multifunctional Separator Coatings for High-Performance \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eLithium–Sulfur Batteries, Adv. Mater. Interfaces, 2016, 3, 1600450\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Doctor Blade","offer_id":47492927422694,"sku":"ESMMTCCHVBDB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Wire Rod","offer_id":47492927455462,"sku":"ESMMTCCHVBWR","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Doctor Blade+ Wire Rod","offer_id":47492927520998,"sku":"ESMMTCCHVBDBWR","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Doctor Blade + Wire Rod + Slot Die","offer_id":47899143274726,"sku":"ESMMTCCHVBDBWRSD","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMTCCDWHVB_03.png?v=1774828337"},{"product_id":"esssdchvb","title":"ECS-SS Slot Die Coater with Heating Vacuum Bed (L150*W130 mm, 120℃), ESSSDCHVB","description":"\u003cp\u003eFor high-precision laboratory coating, a slot-die coater paired with a heated vacuum bed offers the most advanced control over film uniformity and drying kinetics. Unlike a doctor blade, a slot-die head is a closed system, which prevents solvent evaporation during the process and allows for a \"pre-metered\" coating where the thickness is determined by the pump's flow rate rather than a mechanical gap.\u003c\/p\u003e\n\u003cp\u003eThe key advantages for slot die coating: (1) \u003cstrong\u003eZero-Waste Coating\u003c\/strong\u003e: The closed-head design of a slot-die ensures that almost 100% of your slurry is deposited onto the substrate, which is vital when working with expensive materials like specialized catalysts or solid-state electrolytes. (2) \u003cstrong\u003ePrecision Drying\u003c\/strong\u003e: The vacuum bed prevents the substrate from warping under the heat of the IR or convection dryer, maintaining a perfectly flat plane for the slot-die head to glide over (typically at a height of 10-100µm). (3) \u003cstrong\u003eScalability\u003c\/strong\u003e: Because slot-die coating is a flow-rate-dependent process, the parameters you develop on these lab-scale heated beds can be directly translated to industrial production lines.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSSDCHVB (ESS-SDCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 280 W \u003c\/li\u003e\n\u003cli\u003eA DC24V converter is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L150*W130mm, which enable the effective coating area of L100mm * W100 mm with included slot die head\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.05-20 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eBottom Heating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 120 ℃ (single-point control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eSlot Die Head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSSDCHVB_02_100x100.png?v=1774847446\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA slot die head with a 100 mm width is included\u003c\/li\u003e\n\u003cli\u003eFour pieces of shims, such as 0.1, 0.2, 0.3, 0.4 mm are included\u003c\/li\u003e\n\u003cli\u003eThe coating width within 100 mm can be realized by customized the opening mouth of the shims. \u003c\/li\u003e\n\u003cli\u003eInside channel volume is around 2.6 mL\u003c\/li\u003e\n\u003cli\u003eThe gap between the slot die tip and vacuum bed can be adjusted in 0-5 mm by rotating the digital gauges (resolution:1 um)\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry Feeding Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne 20 mL stainless steel syringe with a plastic plunger is included., which can be mounted at the side. A large syringe (eg: 60 mL) can be supplied upon request). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSSDCHVB_03_100x100.png?v=1774848495\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry feeding speed: 0.05-5 mL\/s \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA small vacuum pump is built-in for sucking the coating substrates \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL450 * W360 * H350 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~20 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/full\/10.1002\/ente.202200684\"\u003eS. Spiegel, et al., Thin cathode for thermal batteries using a tape-casting proces, Energy Technology, 2023, 11, 2200684\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47493680070886,"sku":"ESSSDCHVB","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSSDCHVB_main.png?v=1774847432"},{"product_id":"esmsdchvb","title":"ECS-SM Slot Die Coater with Heating Vacuum Bed (L360*W250 mm, 100℃), ESMSDCHVB","description":"\u003cp\u003eFor high-precision laboratory coating, a slot-die coater paired with a heated vacuum bed offers the most advanced control over film uniformity and drying kinetics. Unlike a doctor blade, a slot-die head is a closed system, which prevents solvent evaporation during the process and allows for a \"pre-metered\" coating where the thickness is determined by the pump's flow rate rather than a mechanical gap.\u003c\/p\u003e\n\u003cp\u003eThe key advantages for slot die coating: (1) \u003cstrong\u003eZero-Waste Coating\u003c\/strong\u003e: The closed-head design of a slot-die ensures that almost 100% of your slurry is deposited onto the substrate, which is vital when working with expensive materials like specialized catalysts or solid-state electrolytes. (2) \u003cstrong\u003ePrecision Drying\u003c\/strong\u003e: The vacuum bed prevents the substrate from warping under the heat of the IR or convection dryer, maintaining a perfectly flat plane for the slot-die head to glide over (typically at a height of 10-100µm). (3) \u003cstrong\u003eScalability\u003c\/strong\u003e: Because slot-die coating is a flow-rate-dependent process, the parameters you develop on these lab-scale heated beds can be directly translated to industrial production lines.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMSDCHVB (ESM-SDCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 500 W \u003c\/li\u003e\n\u003cli\u003eA DC24V converter is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole vacuum bed area is L360*W250mm, which enable the effective coating area of L300mm * W200 mm with included slot die head\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.05-20 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eBottom Heating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100 ℃ (single-point control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eSlot Die Head\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSSDCHVB_02_100x100.png?v=1774847446\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA slot die head with a 200 mm width is included\u003c\/li\u003e\n\u003cli\u003eFour pieces of shims, such as 0.1, 0.2, 0.3, 0.4 mm are included\u003c\/li\u003e\n\u003cli\u003eThe coating width within 200 mm can be realized by customized the opening mouth of the shims. \u003c\/li\u003e\n\u003cli\u003eInside channel volume is around 8.0 mL\u003c\/li\u003e\n\u003cli\u003eThe gap between the slot die tip and vacuum bed can be adjusted in 0-5 mm by rotating the digital gauges (resolution:1 um)\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafaw80?variant=47492067393766\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry Feeding Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne 60 mL stainless steel syringe with a plastic plunger is included., which can be mounted at the side. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMSDCHVB_02_100x100.png?v=1774853240\" style=\"float: none;\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry feeding speed: 0.1-1.5 mm\/s \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA small vacuum pump is built-in for sucking the coating substrates \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eUpgrade Version (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFor melting-slot die extrusion process, such as polymer-based solid-state electrolyte, the feed syringe and slot die head with heating jacket (100 ℃) can be supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMSDCHVB_03_160x160.png?v=1774854036\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL450 * W360 * H350 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~20 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/full\/10.1002\/ente.202200684\"\u003eS. Spiegel, et al., Thin cathode for thermal batteries using a tape-casting process, Energy Technology, 2023, 11, 2200684\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47493742133478,"sku":"ESMSDCHVB","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMSDCHVB_main.png?v=1774853240"},{"product_id":"esmr2reficcc","title":"ECS-SM Lab-Scale Roll-to-Roll Electrode Fabrication with Integrated Coater, Calender, and Cutter, ESMR2REFICCC","description":"\u003cp\u003eFor lab-scale roll-to-roll (R2R) electrode fabrication, the process is typically divided into three primary stages: precision coating, densification (calendering), and final shaping (slitting\/cutting). Transitioning to R2R allows you to simulate industrial production while maintaining the flexibility of a research environment.\u003c\/p\u003e\n\u003cp\u003eThe lab-scale roll-to-roll electrode fabrication unit integrated the coating, rolling press, and die cutting to continuously obtain round electrode disk and electrode sheet for coin cell and pouch cell, respectively. \u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMR2REFICCC (ESM-R2REF-ICCC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower Source\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 5500 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be realized by using a high power transformer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Source\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-0.8 MPa for pneumatic operation \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eGuiding Roller Width: 100 mm\u003c\/li\u003e\n\u003cli\u003eMax. substrate roll and coating width is 80 and 60 mm, respectively. A four-side film applicator is included. \u003c\/li\u003e\n\u003cli\u003eWeb Speed: 0.01-1.0 m\/min\u003c\/li\u003e\n\u003cli\u003eCoating Speed: 0.2 m\/min (based on graphite anode slurry, viscosity is 2000 cP, solid content is 45% and dry film thickness of 90 um)\u003c\/li\u003e\n\u003cli\u003eCoating thickness uniformity: ±3μm\u003c\/li\u003e\n\u003cli\u003eManual slurry loading. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDrying Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eConvection heating mode, single chamber length: 0.5 m\u003c\/li\u003e\n\u003cli\u003eElectric heating with a power of 2400 W\u003c\/li\u003e\n\u003cli\u003eMax. heating temperature: 130℃ \u003c\/li\u003e\n\u003cli\u003eVentilation: centrifugal fan with air flow of 570 m3\/h. The outlet port size is 120 mm to connect a 5\" aluminum pipe.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eRolling Press Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCold Calender with a size of Φ100 x L90mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRoller hardness: ≥HRC55\u003c\/li\u003e\n\u003cli\u003eRolling gap: 0-1.5 mm, adjustable with mechanical gauge\u003c\/li\u003e\n\u003cli\u003eMax. rolling press force: 5 T (unchangeable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eElectrode Cutting Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTraverse distance for cutting: Max. 16 mm \u003c\/li\u003e\n\u003cli\u003eFor coin cell, the cutting die is available in φ8～φ24mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTension Control \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e10-40 N\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLoading Roll\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWinding\/Unwinding Roll Diameter: Max. Ф250mm\u003c\/li\u003e\n\u003cli\u003eCardboard Size: I.D. 3\" \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL2000 * W750 * H850 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~500 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2405829720301641\"\u003eD. L. Wood III, et al., Perspectives on the relationship between materials chemistry and roll-to-roll electrode manufacturing for high-energy lithium-ion batteries, Energy Storage Materials, 2020, 29, 254-265\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.nature.com\/articles\/s44359-024-00018-w\"\u003eR. Tao, et al., Advanced electrode processing for lithium-ion battery manufacturing, Nature Reviews Clean Technology, 2025, 1, 116–131\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47493881069798,"sku":"ESMR2REFICCC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMR2REFICCC_main.png?v=1774858221"},{"product_id":"esmecpccrp","title":"ECS-SM Pressure-Control Cold Rolling Press (W200mm) for Electrode Calendering, ESMECPCCRP","description":"\u003cp\u003eFor high-precision electrode calendering, transitioning from simple gap-control (setting the distance between rollers) to pressure-control is the key to achieving consistent energy density and ionic conductivity. In a pressure-controlled system, the machine uses hydraulic or servo-actuators to apply a specific, measurable force (typically in metric tons) regardless of slight variations in the initial coating thickness.\u003c\/p\u003e\n\u003cp\u003eWhen using a pressure-control press, your goal is to optimize the Packing Density (PD) = m\/(A*t). Where m is the mass of active material, A is the area, and t is the post-calendering thickness. (1) \u003cstrong\u003e10% Rule\u003c\/strong\u003e: For most lithium-ion cathodes (NMC\/LFP), aim for a thickness reduction of approximately 10–20% per pass. Attempting more can cause \"spring-back\" or delamination. (2) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: Calendering at 60-100 °C reduces the yield strength of the PVDF binder, allowing for higher density at lower pressures and reducing the risk of foil cracking. (3) \u003cstrong\u003eLinear Pressure\u003c\/strong\u003e: In production, pressure is often reported as N\/mm (force divided by the width of the electrode). Lab machines that report total \"Tons\" should be converted to linear pressure for academic reporting.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMECPCCRP (ESM-EC-PCCRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCold Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ100 x 215mm (effective width: 200 mm)\u003c\/li\u003e\n\u003cli\u003eRoller is made of Cr12Mo1V1 and surface plated with Cr layer\u003c\/li\u003e\n\u003cli\u003eSurface Hardness: HRC58～60, surface coating thickness: ≥10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 5T, adjustable in HMI touch screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.3-2.5m \/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-2.0 mm, manually adjust\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eOptional\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe roller surface with PTFE coating can be customized for sticky Li\/Na metal calendering and lamination. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL644 * W355 * H595 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~160 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process,Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47496509817062,"sku":"ESMECPCCRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMECPCCRP.png?v=1774914208"},{"product_id":"erstcchvb","title":"ECS-RS Tape Casting Coater with Top\/Bottom Heating (130℃) and Vacuum Bed (L250*W150 mm), ERSTCCHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable style=\"height: 1412.6px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSTCCHVB (ERS-TCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 650 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum alloy vacuum bed area is L415*W200mm, which enable the effective coating area is L300mm * W150 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTraverse Distance is 300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-120 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 538.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 538.8px;\"\u003e\u003cem\u003eHeating Model \u0026amp; Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 538.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 150 ℃ (±1°C, single-point control)\u003c\/li\u003e\n\u003cli\u003eMax. heating rate: 10 °C\/min, resistance heating mechanism\u003c\/li\u003e\n\u003cli\u003eThere are three types of heating models:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            (1) Top-Cover Heating\u003c\/p\u003e\n\u003cp\u003e                  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_02_100x100.png?v=1775014151\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e            (2) Bottom Plate Heating\u003c\/p\u003e\n\u003cp\u003e             \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_03_100x100.png?v=1775017282\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e           (3) TOP Cover + Bottom Plate Heating\u003cbr\u003e              \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_04_100x100.png?v=1775017619\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 414.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 414.6px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not included\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 414.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Four Side Film Applicator with Fixed Gap\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            The standard one (effective coating width of 80mm) has four-side\u003c\/p\u003e\n\u003cp\u003e            gap of 100 um, 150 um, 200 um, and 250 um. Other options can\u003c\/p\u003e\n\u003cp\u003e            be found here (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003eESSAFSFAFG\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_02_100x100.png?v=1774764406\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47500878053606\"\u003eETCCAFA\u003c\/a\u003e)\u003cbr\u003e\n\u003cdiv style=\"text-align: left;\"\u003eThe standard coating width of 50 ,100 or 150 mm can be used for this coater.  \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETCCAFA_main_100x100.png?v=1775016251\"\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump is built-in for operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL500 * W350 * H320 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~40 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"RSC","offers":[{"title":"Top-Cover Heating","offer_id":47500920127718,"sku":"ERSTCCTHVB","price":3599.0,"currency_code":"USD","in_stock":true},{"title":"Bottom-Plate Heating","offer_id":47500920160486,"sku":"ERSTCCBHVB","price":3599.0,"currency_code":"USD","in_stock":true},{"title":"Top Cover + Bottom Plate Heating","offer_id":47500920193254,"sku":"ERSTCCTBHVB","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_02.png?v=1775014151"},{"product_id":"etmtcchvb","title":"ECS-TM Economic Tape Casting Coater with Top\/Bottom Heating (130℃) and Vacuum Bed (L300*W250 mm), ETMTCCHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eETMTCCHVB (ETM-TCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1500 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum alloy vacuum bed area is L415*W300mm, which enable the effective coating area is L300mm * W250 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-120 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Model \u0026amp; Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 130 ℃ (±1°C, single-point control)\u003c\/li\u003e\n\u003cli\u003eMax. heating rate: 10 °C\/min, resistance heating mechanism\u003c\/li\u003e\n\u003cli\u003eThere are three types of heating models:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            (1) Top-Cover Heating (default is electric resistance heating, but \u003c\/p\u003e\n\u003cp\u003e                  IR heating is available upon request)\u003c\/p\u003e\n\u003cp\u003e                  \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_02_100x100.png?v=1775014151\"\u003e\u003c\/p\u003e\n\u003cp\u003e            (2) Bottom Plate Heating\u003c\/p\u003e\n\u003cp\u003e             \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_03_100x100.png?v=1775017282\"\u003e\u003c\/p\u003e\n\u003cp\u003e           (3) TOP Cover + Bottom Plate Heating\u003cbr\u003e              \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSTCCHVB_04_100x100.png?v=1775017619\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not included\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47500878053606\"\u003eETCCAFA\u003c\/a\u003e). The recommended coating width is less than 250 mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETCCAFA_main_100x100.png?v=1775016251\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Hybrid film applicator (slot die + doctor blade) \u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47501068435686\"\u003eESSAHFA.\u003c\/a\u003e The recommend slot die coating width is less than 250 mm.  For slot die coating, the syringe pumps (\u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcepsp?variant=47501234307302\"\u003eEASDCEPSP\u003c\/a\u003e or \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdclssp?variant=47501457785062\"\u003eEASDCLSSP\u003c\/a\u003e can be considered) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMTCCIHCVB_06_100x100.png?v=1775022058\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump is built-in for operation \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL550 * W450 * H320 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"TOB","offers":[{"title":"Top-Cover Heating","offer_id":47500948373734,"sku":"ETMTCCTHVB","price":4499.0,"currency_code":"USD","in_stock":true},{"title":"Bottom-Plate Heating","offer_id":47500948406502,"sku":"ETMTCCBHVB","price":4499.0,"currency_code":"USD","in_stock":true},{"title":"Top Cover + Bottom Plate Heating","offer_id":47500948439270,"sku":"ETMTCCTBHVB","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETMTCCHVB_main.png?v=1775024196"},{"product_id":"erltcchvb","title":"ECS-RL Tape Casting Coater with Top\/Bottom Heating (130℃) and Vacuum Bed (L800*W150 mm), ERLTCCHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERLTCCHVB (ERL-TCCHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 2000 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum alloy vacuum bed area is L900*W200mm, which enable the effective coating area is L800mm * W150 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-200 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHeating Model \u0026amp; Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 130 ℃ (±1°C, single-point control)\u003c\/li\u003e\n\u003cli\u003eMax. heating rate: 10 °C\/min, resistance heating mechanism\u003c\/li\u003e\n\u003cli\u003eThere are three types of heating models:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            (1) Top-Cover Heating (default is electric resistance heating, but \u003c\/p\u003e\n\u003cp\u003e                  IR heating is available upon request)\u003c\/p\u003e\n\u003cp\u003e            (2) Bottom Plate Heating\u003c\/p\u003e\n\u003cp\u003e            (3) TOP Cover + Bottom Plate Heating\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 39.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not included\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 39.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: \u003cspan\u003eFour Side Film Applicator with Fixed Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003eESSAFSFAFG\u003c\/a\u003e)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e          \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSTCCHVB_02_100x100.png?v=1774771839\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Standard Film Applicator with Adjustable Gap (\u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47500878053606\"\u003eETCCAFA\u003c\/a\u003e). The recommended doctor blade coating width is 50 mm, 100 mm, and 150 mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETCCAFA_main_100x100.png?v=1775016251\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 3\u003c\/strong\u003e: Hybrid film applicator (slot die + doctor blade) \u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47501068435686\"\u003eESSAHFA.\u003c\/a\u003e The recommend slot die coating head is Slot Die (100 mm) + Doctor Blade (150 mm).  For slot die coating, the syringe pumps (\u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcepsp?variant=47501234307302\"\u003eEASDCEPSP\u003c\/a\u003e or \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdclssp?variant=47501457785062\"\u003eEASDCLSSP\u003c\/a\u003e can be considered) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMTCCIHCVB_06_100x100.png?v=1775022058\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump is externally connected for operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL550 * W450 * H320 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"RSC","offers":[{"title":"Top-Cover Heating","offer_id":47502052819174,"sku":"ERLTCCTHVB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Bottom-Plate Heating","offer_id":47502052851942,"sku":"ERLTCCBHVB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Top Cover + Bottom Plate Heating","offer_id":47502052884710,"sku":"ERLTCCTBHVB","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETLTCCHVB_main.png?v=1775055391"},{"product_id":"ersecgchrp","title":"ECS-RS Gap-Control Hot Rolling Press (W100mm, 130°C) for Electrode Calendering, ERSECGCHRP","description":"\u003cp\u003eFor high-precision electrode calendering, transitioning from simple gap-control (setting the distance between rollers) to pressure-control is the key to achieving consistent energy density and ionic conductivity. In a pressure-controlled system, the machine uses hydraulic or servo-actuators to apply a specific, measurable force (typically in metric tons) regardless of slight variations in the initial coating thickness.\u003c\/p\u003e\n\u003cp\u003eWhen using a pressure-control press, your goal is to optimize the Packing Density (PD) = m\/(A*t). Where m is the mass of active material, A is the area, and t is the post-calendering thickness. (1) \u003cstrong\u003e10% Rule\u003c\/strong\u003e: For most lithium-ion cathodes (NMC\/LFP), aim for a thickness reduction of approximately 10–20% per pass. Attempting more can cause \"spring-back\" or delamination. (2) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: Calendering at 60-100 °C reduces the yield strength of the PVDF binder, allowing for higher density at lower pressures and reducing the risk of foil cracking. (3) \u003cstrong\u003eLinear Pressure\u003c\/strong\u003e: In production, pressure is often reported as N\/mm (force divided by the width of the electrode). Lab machines that report total \"Tons\" should be converted to linear pressure for academic reporting.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSECGCHRP (ERS-EC-GCHRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 1000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHot Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ96 x 100 mm (effective width for hot rolling: 80-90 mm)\u003c\/li\u003e\n\u003cli\u003eRoller is made of Cr12Mo1V1 and surface plated with Cr layer\u003c\/li\u003e\n\u003cli\u003eSurface Hardness: HRC62, surface coating thickness: ≥10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRolling Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 130 \u003cspan\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-40 mm\/s, digital display, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-2.0 mm, manually adjust\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRoll-to-Roll Integration (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA roll-to-roll unit can be integrated with the hot rolling press for electrode roll calendering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETSECGCHRP_02_01_100x100.png?v=1775757331\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL670 * W225 * H300 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process, Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47506853986534,"sku":"ERSECGCHRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSECGCHRP_main_01.png?v=1782234261"},{"product_id":"ersbpedvo","title":"ECS-RS Vacuum Oven (250°C, 50 L) for Battery Powder and Electrode Drying, ERSBPEDVO","description":"\u003cp\u003eIn battery research, a vacuum oven is critical for removing trace moisture from powders (active materials) and electrodes (coated foils) without causing oxidation. For lithium-ion systems, the goal is typically to achieve moisture levels below 50 ppm for electrodes and below 10 ppm for finished cells.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERSBPEDVO (ERS-BPED-VO)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 1400 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTemperature Range\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 250 °C (resolution: ±0.5℃)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e≤-0.1 MPa (≤133 Pa) (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ethe vacuum pump is not included, which should be additionally purchased\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003ePlease consider the vacuum pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL415 * W345* H370 mm\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Material\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSS304 (2 shelves included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eChamber Door\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eToughened Bulletproof Double Glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL710 * W560 * H550 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/chemistry-europe.onlinelibrary.wiley.com\/doi\/full\/10.1002\/batt.202100088\"\u003eF. Huttner, et al., Design of Vacuum Post-Drying Procedures for Electrodes of Lithium-Ion Batteries, Batteries \u0026amp; Supercaps, 2021, 4, 1499-1515\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591020306690\"\u003eF. Zhao, et al., A novel online moisture monitoring method for vacuum drying of lithium ion battery powder, Powder Technology, 2020, 375, 244-248\u003c\/a\u003e.\u003c\/p\u003e","brand":"TOB","offers":[{"title":"Default Title","offer_id":47506980143334,"sku":"ERSBPEDVO","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERSBPEDVO_main.png?v=1782235255"},{"product_id":"essvsf","title":"ECS-SS Vacuum Slurry Filter (500mL or 2L), ESSVSF","description":"\u003cp\u003eFor laboratory battery research, a vacuum slurry filter is used immediately after mixing to remove agglomerates, undissolved gels, and extraneous particles. This ensures a \"narrow\" particle size distribution, which is critical for achieving a uniform, defect-free coating on your current collectors.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSVSF (ESS-VSF)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110-220V±10%, single phase, 50\/60Hz, 5-12 W\u003c\/li\u003e\n\u003cli\u003eA DC12V converter is included. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSlurry Tank Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTank material is made of SS304\u003c\/li\u003e\n\u003cli\u003eCapacity has two versions: 750 mL and 2L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eMesh Sizes\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMesh 100 and 200 are included.\u003c\/li\u003e\n\u003cli\u003eMesh 150, 250, 300, 400, and 500 are available upon request. \u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e-65 KPa (a small dry-air vacuum pump is included.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL150 * W150 * H200 mm for 500 mL version\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eL150 * W150* H200 mm for 500 mL version for 2 L version\u003c\/li\u003e\n\u003cli\u003eVacuum pump size: L140 * W70* H150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL710 * W560 * H550 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~4 kg for 500 mL version\u003c\/li\u003e\n\u003cli\u003e~7 kg for 2 L version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/0957-4484\/20\/23\/235203\/meta\"\u003eJ. H. Lee, et al., Tin nanoparticle thin film electrodes fabricated by the vacuum filtration method for enhanced battery performance, Nanotechnology, 2009, 20, 235203\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acs.iecr.3c03586\"\u003eM. H. Jeong, et al., High-Speed Li-Ion Battery Manufacturing Process Applying the Dewatering Concept, Ind. Eng. Chem. Res. 2024, 63, 10, 4408–4419\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"500 mL","offer_id":47507923960038,"sku":"ESSVSF500","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"2 L","offer_id":47507923992806,"sku":"ESSVSF2000","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSVSF_main.png?v=1775176470"},{"product_id":"eseltccbhvb","title":"ECS-SEL Tape Casting Coater with Bottom Heating (120℃) and Vacuum Bed (L1000*W500 mm), ESELTCCBHVB","description":"\u003cp\u003eFor lab-scale tape casting (also known as doctor blade coating), the most effective systems combine a high-precision vacuum chuck to hold the substrate flat and an integrated heating element to control the drying process. These features are critical for producing uniform, crack-free films for battery electrodes, fuel cell membranes, or ceramic tapes.\u003c\/p\u003e\n\u003cp\u003eThe key selection criteria of an appropriate tape casting coater: (1) \u003cstrong\u003eVacuum Bed\u003c\/strong\u003e: Essential for keeping thin foils (like Copper or Aluminum) or polymer films from wrinkling during the coating stroke. (2) \u003cstrong\u003eHeating Method\u003c\/strong\u003e: Top heating (infrared or convection) dries the slurry surface first, while bottom heating (heated bed) transfers heat through the substrate. (3) \u003cstrong\u003eCoating Speed\u003c\/strong\u003e: Look for variable speed control (typically 0–100 mm\/s) to match the rheology of your specific slurry. (4) \u003cstrong\u003eDoctor Blade Compatibility\u003c\/strong\u003e: Most of these units are compatible with adjustable micrometer doctor blades or fixed-gap film applicators.\u003c\/p\u003e\n\u003ctable style=\"height: 951.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESELTCCBHVB (ESEL-TCCBHVB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2000 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe aluminum alloy vacuum bed area is L1100*W550mm, which enable the effective coating area is L1000mm * W500 mm (depends on the film applicator is used).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e5-80 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eHeating Model \u0026amp; Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 120 ℃ (±1°C, single-point control)\u003c\/li\u003e\n\u003cli\u003eMax. heating rate: 5-8 °C\/min, bottom resistance heating\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eTop-cover heating with resistance, IR, UV heating can be customized upon request. \u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 265.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 265.2px;\"\u003e\n\u003cp\u003eFilm Applicator (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not included\u003c\/span\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 265.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 1\u003c\/strong\u003e: \u003cspan\u003eDoctor Blade (500 mm width, \u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47520265273574\"\u003eETCCAFAW500\u003c\/a\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essafsfafg?variant=47491848863974\"\u003e\u003c\/a\u003e)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e          \u003c\/span\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETCCAFA_03_100x100.png?v=1775601057\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption 2\u003c\/strong\u003e: Hybrid film applicator (slot die + doctor blade) with 500 mm coating width \u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47520286638310\"\u003eESSAHFASD500\u003c\/a\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47501068435686\"\u003e.\u003c\/a\u003e  For slot die coating, the large syringe pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcldcsp?variant=47520463782118\"\u003eEASDCLDCSP\u003c\/a\u003e can be considered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMTCCIHCVB_07_100x100.png?v=1775601542\"\u003e       \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCLDCSP_main_100x100.png?v=1775609112\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 187.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 187.6px;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not included\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 187.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA vacuum pump (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esovp?variant=47512544542950\"\u003eESOVP\u003c\/a\u003e) is externally connected for vacuum chunk operation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESOVP_main_100x100.png?v=1775407970\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1280 * W620 * H430 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~90 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0272884217301475\"\u003eJ. Ko, et al., Thin cathode for thermal batteries using a tape-casting process, Ceramic International, 2017, 43, 5789-5793\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/abs\/10.1021\/acsami.4c18516\"\u003eH. Zhao, et al., Tape-Casting Fabrication Techniques for Garnet-Based Membranes in Solid-State Lithium-Metal Batteries: A Comprehensive Review, ACS Appl. Mater. Interfaces 2024, 16, 50, 68772–68793\u003c\/a\u003e. \u003c\/p\u003e","brand":"SYKJ","offers":[{"title":"Default Title","offer_id":47520259309798,"sku":"ESELTCCBHVB","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESELTCCBHVB_main.png?v=1775602163"},{"product_id":"essmr2rc","title":"ECS-SS Multifunctional Roll-to-Roll Coater (Max. 160 mm, Doctor Balde, Reverse Comma, Slot Die, and Microgravure), ESSMR2RC","description":"\u003cp\u003eA high-end lab R2R coater normally offer interchangeable heads: (1) \u003cstrong\u003eSlot-Die Coating\u003c\/strong\u003e: The industry standard for high-precision battery electrodes. It uses a shim and a precision pump to \"meter\" the slurry. This is ideal for your NMP slurries as it minimizes solvent evaporation at the coating head. (2) \u003cstrong\u003eComma Doctor \/ Reverse Comma\u003c\/strong\u003e: Excellent for high-viscosity slurries. It uses a rotating \"comma\" roller to set the wet thickness. (3) \u003cstrong\u003eMicro-Gravure\u003c\/strong\u003e: Best for very thin coatings (like functional ceramic layers on separators or thin ion-exchange membranes). It uses a patterned roller to transfer a precise volume of liquid.\u003c\/p\u003e\n\u003cp\u003eGeneral Introduction of R2R coating methods:\u003c\/p\u003e\n\u003cp\u003e(1). \u003cstrong\u003eDoctor Blade Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_02.png?v=1775622122\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eIn a R2R setup, doctor blade coating is normally called Knife-over-Roll coating. It mainly consists of (1) \u003cstrong\u003eWeb\u003c\/strong\u003e: The aluminum or copper foil is pulled over a high-precision backup roller. (2) \u003cstrong\u003eReservoir\u003c\/strong\u003e: A \"dam\" of slurry is maintained just behind the blade. (3) \u003cstrong\u003eMetering\u003c\/strong\u003e: As the foil moves, the blade (the \"knife\") scrapes off excess slurry. The thickness of the wet coating is determined by the gap between the blade edge and the foil surface. The wet thickness T= Gap * K (where K is a factor, that is usually around 0.5 to 0.7, depending on the slurry's viscosity and the web speed.)\u003c\/p\u003e\n\u003cp\u003e(2). \u003cstrong\u003eReverse Comma Coating (also called Transfer Comma Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_03.png?v=1775622183\" alt=\"\" width=\"140\" height=\"102\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike a standard doctor blade where the foil moves under a stationary knife, a reverse comma system uses a three-roll or two-roll configuration to \"transfer\" a metered film of slurry onto the foil. The key components and features are: (1) \u003cstrong\u003eComma Roller\u003c\/strong\u003e: A high-precision steel cylinder with a \"comma-shaped\" cross-section. It doesn't move during the coating process; instead, it acts as a high-precision gate. (2) \u003cstrong\u003eApplicator (Back-up) Roller\u003c\/strong\u003e: This roller rotates in the opposite direction (reverse) to the web travel. It picks up the slurry from a reservoir and carries it toward the comma gap. (3) \u003cstrong\u003eTransfer\u003c\/strong\u003e: As the foil (web) passes between the rollers, the metered slurry is wiped onto the foil.\u003c\/p\u003e\n\u003cp\u003e(3). \u003cstrong\u003eSlot Die Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cimg height=\"105\" width=\"130\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_04.png?v=1775622901\"\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eWhile doctor blade and comma coating are \"metering\" methods (where you scrape off excess), slot-die is a \"pre-metered\" method. This means the exact volume of slurry pumped into the head is the exact volume that ends up on the foil. Normally slot die coating system consists of three main components: A high-precision pump (usually a syringe or gear pump), a slot-die head, and a back-up roller. The slot die coating head is mainly composed of (1)\u003cstrong\u003e Reservoir (Manifold)\u003c\/strong\u003e: The slurry is pumped into an internal cavity inside the die head designed to distribute the fluid evenly across the entire width. (2) \u003cstrong\u003eShim\u003c\/strong\u003e: A thin, precision-cut metal plate determines the width of the coating and the internal gap of the die. The coating bead is critical for the coating film quality, where the slurry emerges from a narrow \"slot\" and forms a liquid bridge (the \"bead\") between the die lips and the moving foil.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e(3). \u003cstrong\u003eMicrogravure Coating\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cstrong\u003e\u003cimg height=\"96\" width=\"169\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_05.png?v=1775623284\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eMicrogravure coating is a specialized roll-to-roll (R2R) technique used for extremely thin, high-precision coatings. Unlike standard gravure, which uses large rollers and a doctor blade on the foil, microgravure uses a very small diameter engraved roll that rotates in the opposite direction to the web. The R2R microgravure coating system has a small, engraved \"gravure\" roll (typically 20mm to 50mm in diameter) that is partially submerged in a slurry reservoir. There are multiple distinct features: (1) \u003cstrong\u003eEngraving Roll\u003c\/strong\u003e: The roll surface is covered in microscopic cells (patterns like honeycombs or pyramids). The \"cell volume\" determines exactly how much liquid is picked up. (2) \u003cstrong\u003eReverse Rotation\u003c\/strong\u003e: The roll rotates in the opposite direction of the foil (web). This \"kiss-coating\" action shears the liquid as it transfers, resulting in a much smoother surface than traditional gravure. (3) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e: A flexible blade scrapes the excess slurry off the roll before it touches the foil, ensuring only the liquid inside the engraved cells is transferred.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 3113.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSMR2RC (ESS-MR2RC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 3550 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller width: 200 mm \u003c\/li\u003e\n\u003cli\u003eLoading substrate width: Max. 180 mm\u003c\/li\u003e\n\u003cli\u003eCoating width: Max. 160 mm\u003c\/li\u003e\n\u003cli\u003eMechanical coating speed: 0.01-1.0m\/min (the real coating speed depends on the slurry properties and dry oven length\/temperature)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\u003cem\u003eUnwinding\/Winding Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller diameter: 3\", mechanical expansion for tightening the loading roll substrate and collection cardboard. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. winding\/unwinding roll diameter: 250 mm \u003c\/li\u003e\n\u003cli\u003eAlignment Sensors were installed and aligning position resolution could be 0.3 mm. \u003c\/li\u003e\n\u003cli\u003eCoating Roller: Stainless Steel with surface Cr coating, Ф80mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 1917.4px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 1917.4px;\"\u003e\u003cem\u003eCoating Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 1917.4px;\"\u003e\n\u003cp\u003e   (1) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_06_100x100.png?v=1775625753\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe doctor blade is made of SS with surface Cr coating and its diameter is Ф50mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-160 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-6000 cP (recommended, higher viscosity up to 10000-15000 cP may also work for thicker electrode).\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFPP2L_main_100x100.png?v=1775628781\"\u003e\u003c\/p\u003e\n\u003cp\u003e    (2) \u003cstrong\u003eReverse Comma\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e         \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_07_100x100.png?v=1775627010\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф80mm. \u003c\/li\u003e\n\u003cli\u003eThe backing roller is made of rubber (Ф80mm, pneumatic)\u003c\/li\u003e\n\u003cli\u003eThe comma bar is made of SS with surface Cr coating and its diameter is Ф50mm.\u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-160 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-12000 cP (recommended)\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    (3) \u003cstrong\u003eSlot Die \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e        \u003c\/strong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_08_100x100.png?v=1775629992\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф80mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-160 mm, which can be adjusted by the opening mouth of shims. The standard shim thickness is 0.2, 0.3, 0.4, 0.5mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_09_100x100.png?v=1775630854\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 50-12000 cP. For battery application, slurry viscosity is recommended in 2000-8000 cP. \u003c\/li\u003e\n\u003cli\u003eThe precise screw pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003eEASDCPSP\u003c\/a\u003e is the best option for stable slot die coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCPSP_main_100x100.png?v=1775632530\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor intermittent coating (or pattern coating) for cylindrical electrode application, the intermittent valve system is highly recommended. For simultaneous dual-layer coating, a customized dual-channel slot die head (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esar2rcsdh?variant=47523176710374\"\u003eESAR2RCSDH\u003c\/a\u003e) can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_10_100x100.png?v=1775633700\" alt=\"\" style=\"float: none;\"\u003e     \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_15_100x100.png?v=1775662134\"\u003e    \u003cimg height=\"82\" width=\"128\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_16_100x100.png?v=1775662200\"\u003e\u003c\/p\u003e\n\u003cp\u003e   (4) \u003cstrong\u003eMicrogravure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e    \u003c\/strong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_11_100x100.png?v=1775633910\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA standard microgravure rod with Ф30mm is included. The parameters, such as coating width, engraved pattern, mesh number and depth can be customized. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_12_100x100.png?v=1775634349\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 20-2000 cP.\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 331.8px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 331.8px;\"\u003e\u003cem\u003eHeating Oven Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 331.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating mode: Convection heating (hot air flow). Other heating methods of IR and UV can be customized upon request. Various heating modules are switchable. \u003c\/li\u003e\n\u003cli\u003eHeating temperature: Max.130℃\u003c\/li\u003e\n\u003cli\u003eHeating oven length: 0.5 m (standard version). If customer want to increase the heating oven length to increase the coating speed, the dual-heating-oven design can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_13_160x160.png?v=1775634733\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVentilation: air flow: 570m³\/h, 5\" aluminum pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\n\u003cp\u003eTension Control System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTension range: 10-40 N (resolution is ±3 N), which is controlled by swing roller system.\u003c\/li\u003e\n\u003cli\u003eFor low-tension substrate coating (eg: separator and membrane), the specially designed low tension version is highly recommended since its lowest tension can be down to 5 N.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 187.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 187.6px;\"\u003e\u003ci\u003eGas Compressor\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 187.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is needed to provide 60-80 psi for pneumatic operation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 86.8px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 10px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 10px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1100 * W780 * H960 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~560 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1361-6463\/aafbf3\/meta\"\u003eH. Li, et al., High-performance supercapacitor carbon electrode fabricated by large-scale roll-to-roll micro-gravure printing,  J. Phys. D: Appl. Phys., 2019, 52, 115501\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/link.springer.com\/article\/10.1007\/s40095-022-00481-w\"\u003eL. A. Román-Ramírez, et al., Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium-ion batteries, International Journal of Energy and Environmental Engineering, 2022, 13, 943-953\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Doctor Blade","offer_id":47522438381798,"sku":"ESSMR2RCDB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma","offer_id":47522438414566,"sku":"ESSMR2RCRC","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Slot Die","offer_id":47522438447334,"sku":"ESSMR2RCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Microgravure","offer_id":47522438480102,"sku":"ESSMR2RCMG","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Slot Die","offer_id":47522438512870,"sku":"ESSMR2RCBSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma + Slot Die","offer_id":47522438545638,"sku":"ESSMR2RCRCSD","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_main.png?v=1775621348"},{"product_id":"esmmr2rc","title":"ECS-SM Multifunctional Roll-to-Roll Coater (Max. 260 mm, Doctor Balde, Reverse Comma, Slot Die, and Microgravure), ESMMR2RC","description":"\u003cp\u003eA high-end lab R2R coater normally offer interchangeable heads: (1) \u003cstrong\u003eSlot-Die Coating\u003c\/strong\u003e: The industry standard for high-precision battery electrodes. It uses a shim and a precision pump to \"meter\" the slurry. This is ideal for your NMP slurries as it minimizes solvent evaporation at the coating head. (2) \u003cstrong\u003eComma Doctor \/ Reverse Comma\u003c\/strong\u003e: Excellent for high-viscosity slurries. It uses a rotating \"comma\" roller to set the wet thickness. (3) \u003cstrong\u003eMicro-Gravure\u003c\/strong\u003e: Best for very thin coatings (like functional ceramic layers on separators or thin ion-exchange membranes). It uses a patterned roller to transfer a precise volume of liquid.\u003c\/p\u003e\n\u003cp\u003eGeneral Introduction of R2R coating methods:\u003c\/p\u003e\n\u003cp\u003eA high-end lab R2R coater normally offer interchangeable heads: (1) \u003cstrong\u003eSlot-Die Coating\u003c\/strong\u003e: The industry standard for high-precision battery electrodes. It uses a shim and a precision pump to \"meter\" the slurry. This is ideal for your NMP slurries as it minimizes solvent evaporation at the coating head. (2) \u003cstrong\u003eComma Doctor \/ Reverse Comma\u003c\/strong\u003e: Excellent for high-viscosity slurries. It uses a rotating \"comma\" roller to set the wet thickness. (3) \u003cstrong\u003eMicro-Gravure\u003c\/strong\u003e: Best for very thin coatings (like functional ceramic layers on separators or thin ion-exchange membranes). It uses a patterned roller to transfer a precise volume of liquid.\u003c\/p\u003e\n\u003cp\u003eGeneral Introduction of R2R coating methods:\u003c\/p\u003e\n\u003cp\u003e(1). \u003cstrong\u003eDoctor Blade Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_02.png?v=1775622122\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eIn a R2R setup, doctor blade coating is normally called Knife-over-Roll coating. It mainly consists of (1) \u003cstrong\u003eWeb\u003c\/strong\u003e: The aluminum or copper foil is pulled over a high-precision backup roller. (2) \u003cstrong\u003eReservoir\u003c\/strong\u003e: A \"dam\" of slurry is maintained just behind the blade. (3) \u003cstrong\u003eMetering\u003c\/strong\u003e: As the foil moves, the blade (the \"knife\") scrapes off excess slurry. The thickness of the wet coating is determined by the gap between the blade edge and the foil surface. The wet thickness T= Gap * K (where K is a factor, that is usually around 0.5 to 0.7, depending on the slurry's viscosity and the web speed.)\u003c\/p\u003e\n\u003cp\u003e(2). \u003cstrong\u003eReverse Comma Coating (also called Transfer Comma Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_03.png?v=1775622183\" alt=\"\" width=\"140\" height=\"102\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike a standard doctor blade where the foil moves under a stationary knife, a reverse comma system uses a three-roll or two-roll configuration to \"transfer\" a metered film of slurry onto the foil. The key components and features are: (1) \u003cstrong\u003eComma Roller\u003c\/strong\u003e: A high-precision steel cylinder with a \"comma-shaped\" cross-section. It doesn't move during the coating process; instead, it acts as a high-precision gate. (2) \u003cstrong\u003eApplicator (Back-up) Roller\u003c\/strong\u003e: This roller rotates in the opposite direction (reverse) to the web travel. It picks up the slurry from a reservoir and carries it toward the comma gap. (3) \u003cstrong\u003eTransfer\u003c\/strong\u003e: As the foil (web) passes between the rollers, the metered slurry is wiped onto the foil.\u003c\/p\u003e\n\u003cp\u003e(3). \u003cstrong\u003eSlot Die Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_04.png?v=1775622901\" alt=\"\" width=\"130\" height=\"105\"\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eWhile doctor blade and comma coating are \"metering\" methods (where you scrape off excess), slot-die is a \"pre-metered\" method. This means the exact volume of slurry pumped into the head is the exact volume that ends up on the foil. Normally slot die coating system consists of three main components: A high-precision pump (usually a syringe or gear pump), a slot-die head, and a back-up roller. The slot die coating head is mainly composed of (1)\u003cstrong\u003e Reservoir (Manifold)\u003c\/strong\u003e: The slurry is pumped into an internal cavity inside the die head designed to distribute the fluid evenly across the entire width. (2) \u003cstrong\u003eShim\u003c\/strong\u003e: A thin, precision-cut metal plate determines the width of the coating and the internal gap of the die. The coating bead is critical for the coating film quality, where the slurry emerges from a narrow \"slot\" and forms a liquid bridge (the \"bead\") between the die lips and the moving foil.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e(3). \u003cstrong\u003eMicrogravure Coating\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_05.png?v=1775623284\" alt=\"\" width=\"169\" height=\"96\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eMicrogravure coating is a specialized roll-to-roll (R2R) technique used for extremely thin, high-precision coatings. Unlike standard gravure, which uses large rollers and a doctor blade on the foil, microgravure uses a very small diameter engraved roll that rotates in the opposite direction to the web. The R2R microgravure coating system has a small, engraved \"gravure\" roll (typically 20mm to 50mm in diameter) that is partially submerged in a slurry reservoir. There are multiple distinct features: (1) \u003cstrong\u003eEngraving Roll\u003c\/strong\u003e: The roll surface is covered in microscopic cells (patterns like honeycombs or pyramids). The \"cell volume\" determines exactly how much liquid is picked up. (2) \u003cstrong\u003eReverse Rotation\u003c\/strong\u003e: The roll rotates in the opposite direction of the foil (web). This \"kiss-coating\" action shears the liquid as it transfers, resulting in a much smoother surface than traditional gravure. (3) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e: A flexible blade scrapes the excess slurry off the roll before it touches the foil, ensuring only the liquid inside the engraved cells is transferred.\u003c\/div\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMMR2RC (ESM-MR2RC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 7500 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRoller width: 300 mm \u003c\/li\u003e\n\u003cli\u003eLoading substrate width: Max. 280 mm\u003c\/li\u003e\n\u003cli\u003eCoating width: Max. 260 mm\u003c\/li\u003e\n\u003cli\u003eMechanical coating speed: 0.01-2.0m\/min (the real coating speed depends on the slurry properties and dry oven length\/temperature)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eUnwinding\/Winding Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRoller diameter: 3\", mechanical expansion for tightening the loading roll substrate and collection cardboard. \u003c\/li\u003e\n\u003cli\u003eMax. winding\/unwinding roll diameter: 250 mm \u003c\/li\u003e\n\u003cli\u003eAlignment Sensors were installed and aligning position resolution could be 0.5 mm. \u003c\/li\u003e\n\u003cli\u003eCoating Roller: Stainless Steel with surface Cr coating, Ф100mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCoating Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e        (1) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_06_100x100.png?v=1775625753\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe doctor blade is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-6000 cP (recommended, higher viscosity up to 10000-15000 cP may also work for thicker electrode).\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e or \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003eEABSFLPP5L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFPP2L_main_100x100.png?v=1775628781\" alt=\"\"\u003e \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFLPP5L_main_100x100.png?v=1775689239\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e        (2) \u003cstrong\u003eReverse Comma (Transfer Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_07_100x100.png?v=1775627010\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe backing roller is made of rubber (Ф100mm, pneumatic)\u003c\/li\u003e\n\u003cli\u003eThe comma bar is made of SS with surface Cr coating and its diameter is Ф100mm.\u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-12000 cP (recommended)\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        (3) \u003cstrong\u003eSlot Die \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_05_100x100.png?v=1775688285\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the opening mouth of shims. The standard shim thickness is 0.2, 0.3, 0.4, 0.5mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_09_100x100.png?v=1775630854\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 50-12000 cP. For battery application, slurry viscosity is recommended in 2000-8000 cP. \u003c\/li\u003e\n\u003cli\u003eThe precise screw pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003eEASDCPSP\u003c\/a\u003e is the best option for stable slot die coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCPSP_main_100x100.png?v=1775632530\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor intermittent coating (or pattern coating) for cylindrical electrode application, the intermittent valve system is highly recommended. For simultaneous dual-layer coating, a customized dual-channel slot die head (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esar2rcsdh?variant=47523176710374\"\u003eESAR2RCSDH\u003c\/a\u003e) can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_10_100x100.png?v=1775633700\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_15_100x100.png?v=1775662134\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_16_100x100.png?v=1775662200\" alt=\"\" width=\"128\" height=\"82\"\u003e\u003c\/p\u003e\n\u003cp\u003e        (4) \u003cstrong\u003eMicrogravure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_06_100x100.png?v=1775688286\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA standard microgravure rod with Ф30mm is included. The parameters, such as coating width, engraved pattern, mesh number and depth can be customized. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_12_100x100.png?v=1775634349\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 20-2000 cP.\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eHeating Oven Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHeating mode: Convection heating (hot air flow). Other heating methods of IR and UV can be customized upon request. Various heating modules are switchable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_02_100x100.png?v=1775686106\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_03_100x100.png?v=1775686032\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeating temperature: Max.130℃\u003c\/li\u003e\n\u003cli\u003eHeating oven length: 0.8 m (standard version). If customer want to increase the heating oven length to increase the coating speed, the dual-heating-oven design can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_13_160x160.png?v=1775634733\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVentilation: air flow: 570m³\/h, 5\" aluminum pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTension Control System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTension range: 10-60 N (resolution is ±3 N), which is controlled by swing roller system.\u003c\/li\u003e\n\u003cli\u003eFor low-tension substrate coating (eg: separator and membrane), the specially designed low tension version is highly recommended since its lowest tension can be down to 5 N.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is needed to provide 60-80 psi for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL2000 * W950 * H1300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~1100 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1361-6463\/aafbf3\/meta\"\u003eH. Li, et al., High-performance supercapacitor carbon electrode fabricated by large-scale roll-to-roll micro-gravure printing, J. Phys. D: Appl. Phys., 2019, 52, 115501\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/link.springer.com\/article\/10.1007\/s40095-022-00481-w\"\u003eL. A. Román-Ramírez, et al., Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium-ion batteries, International Journal of Energy and Environmental Engineering, 2022, 13, 943-953\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Doctor Blade","offer_id":47523596108006,"sku":"ESMMR2RCDB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma","offer_id":47523596140774,"sku":"ESMMR2RCRC","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Slot Die","offer_id":47523596173542,"sku":"ESMMR2RCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Microgravure","offer_id":47523596206310,"sku":"ESMMR2RCMG","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Slot Die","offer_id":47523596239078,"sku":"ESMMR2RCBSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma + Slot Die","offer_id":47523596271846,"sku":"ESMMR2RCRCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Reverse Comma + Slot Die","offer_id":47523649552614,"sku":"ESMMR2RCBRCSD","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_main.png?v=1775667380"},{"product_id":"eslpsmr2rc","title":"ECS-SL Pilot-Scale Multifunctional Roll-to-Roll Coater (Max. 360 mm, Doctor Balde, Reverse Comma, Slot Die, and Microgravure), ESLPSMR2RC","description":"\u003cp\u003eA high-end lab R2R coater normally offer interchangeable heads: (1) \u003cstrong\u003eSlot-Die Coating\u003c\/strong\u003e: The industry standard for high-precision battery electrodes. It uses a shim and a precision pump to \"meter\" the slurry. This is ideal for your NMP slurries as it minimizes solvent evaporation at the coating head. (2) \u003cstrong\u003eComma Doctor \/ Reverse Comma\u003c\/strong\u003e: Excellent for high-viscosity slurries. It uses a rotating \"comma\" roller to set the wet thickness. (3) \u003cstrong\u003eMicro-Gravure\u003c\/strong\u003e: Best for very thin coatings (like functional ceramic layers on separators or thin ion-exchange membranes). It uses a patterned roller to transfer a precise volume of liquid.\u003c\/p\u003e\n\u003cp\u003eGeneral Introduction of R2R coating methods:\u003c\/p\u003e\n\u003cp\u003e(1). \u003cstrong\u003eDoctor Blade Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_02.png?v=1775622122\"\u003e\u003c\/p\u003e\n\u003cp\u003eIn a R2R setup, doctor blade coating is normally called Knife-over-Roll coating. It mainly consists of (1) \u003cstrong\u003eWeb\u003c\/strong\u003e: The aluminum or copper foil is pulled over a high-precision backup roller. (2) \u003cstrong\u003eReservoir\u003c\/strong\u003e: A \"dam\" of slurry is maintained just behind the blade. (3) \u003cstrong\u003eMetering\u003c\/strong\u003e: As the foil moves, the blade (the \"knife\") scrapes off excess slurry. The thickness of the wet coating is determined by the gap between the blade edge and the foil surface. The wet thickness T= Gap * K (where K is a factor, that is usually around 0.5 to 0.7, depending on the slurry's viscosity and the web speed.)\u003c\/p\u003e\n\u003cp\u003e(2). \u003cstrong\u003eReverse Comma Coating (also called Transfer Comma Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg height=\"102\" width=\"140\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_03.png?v=1775622183\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike a standard doctor blade where the foil moves under a stationary knife, a reverse comma system uses a three-roll or two-roll configuration to \"transfer\" a metered film of slurry onto the foil. The key components and features are: (1) \u003cstrong\u003eComma Roller\u003c\/strong\u003e: A high-precision steel cylinder with a \"comma-shaped\" cross-section. It doesn't move during the coating process; instead, it acts as a high-precision gate. (2) \u003cstrong\u003eApplicator (Back-up) Roller\u003c\/strong\u003e: This roller rotates in the opposite direction (reverse) to the web travel. It picks up the slurry from a reservoir and carries it toward the comma gap. (3) \u003cstrong\u003eTransfer\u003c\/strong\u003e: As the foil (web) passes between the rollers, the metered slurry is wiped onto the foil.\u003c\/p\u003e\n\u003cp\u003e(3). \u003cstrong\u003eSlot Die Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_04.png?v=1775622901\" alt=\"\" width=\"130\" height=\"105\"\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eWhile doctor blade and comma coating are \"metering\" methods (where you scrape off excess), slot-die is a \"pre-metered\" method. This means the exact volume of slurry pumped into the head is the exact volume that ends up on the foil. Normally slot die coating system consists of three main components: A high-precision pump (usually a syringe or gear pump), a slot-die head, and a back-up roller. The slot die coating head is mainly composed of (1)\u003cstrong\u003e Reservoir (Manifold)\u003c\/strong\u003e: The slurry is pumped into an internal cavity inside the die head designed to distribute the fluid evenly across the entire width. (2) \u003cstrong\u003eShim\u003c\/strong\u003e: A thin, precision-cut metal plate determines the width of the coating and the internal gap of the die. The coating bead is critical for the coating film quality, where the slurry emerges from a narrow \"slot\" and forms a liquid bridge (the \"bead\") between the die lips and the moving foil.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e(3). \u003cstrong\u003eMicrogravure Coating\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_05.png?v=1775623284\" alt=\"\" width=\"169\" height=\"96\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eMicrogravure coating is a specialized roll-to-roll (R2R) technique used for extremely thin, high-precision coatings. Unlike standard gravure, which uses large rollers and a doctor blade on the foil, microgravure uses a very small diameter engraved roll that rotates in the opposite direction to the web. The R2R microgravure coating system has a small, engraved \"gravure\" roll (typically 20mm to 50mm in diameter) that is partially submerged in a slurry reservoir. There are multiple distinct features: (1) \u003cstrong\u003eEngraving Roll\u003c\/strong\u003e: The roll surface is covered in microscopic cells (patterns like honeycombs or pyramids). The \"cell volume\" determines exactly how much liquid is picked up. (2) \u003cstrong\u003eReverse Rotation\u003c\/strong\u003e: The roll rotates in the opposite direction of the foil (web). This \"kiss-coating\" action shears the liquid as it transfers, resulting in a much smoother surface than traditional gravure. (3) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e: A flexible blade scrapes the excess slurry off the roll before it touches the foil, ensuring only the liquid inside the engraved cells is transferred.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ctable style=\"height: 3113.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLPSMR2RC (ESL-PSMR2RC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, three phases, 50\/60Hz, 11 KW\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAC380V±10%, three phases is available upon request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller width: 400 mm (Customized roller width up to 600 mm can be supplied upon request) \u003c\/li\u003e\n\u003cli\u003eLoading substrate width: Max. 380 mm\u003c\/li\u003e\n\u003cli\u003eCoating width: Max. 360 mm\u003c\/li\u003e\n\u003cli\u003eMechanical coating speed: Max. 10 m\/min (the real coating speed depends on the slurry properties and dry oven length\/temperature)\u003c\/li\u003e\n\u003cli\u003eGuiding roller diameter: Ф60mm (anodized aluminum)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\u003cem\u003eUnwinding\/Winding Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller diameter: 3\", mechanical expansion for tightening the loading roll substrate and collection cardboard. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. winding\/unwinding roll diameter: 300 mm \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlignment Sensors were installed and aligning position resolution could be 0.5 mm. \u003c\/li\u003e\n\u003cli\u003eCoating Roller: Stainless Steel with surface Cr coating, Ф120mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 1917.4px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 1917.4px;\"\u003e\u003cem\u003eCoating Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 1917.4px;\"\u003e\n\u003cp\u003e   (1) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_06_100x100.png?v=1775625753\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe doctor blade is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 50-360 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-6000 cP (recommended, higher viscosity up to 10000-15000 cP may also work for thicker electrode).\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003eEABSFLPP5L\u003c\/a\u003e can be considered (Larger tank volume (eg: 10 L, 20 L) can be supplied upon request). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e              \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFLPP5L_main_100x100.png?v=1775689239\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e    (2) \u003cstrong\u003eReverse Comma (Transfer Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e         \u003c\/strong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLPSMR2RC_03_100x100.png?v=1775699889\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф120mm. \u003c\/li\u003e\n\u003cli\u003eThe backing roller is made of rubber (Ф120mm, pneumatic)\u003c\/li\u003e\n\u003cli\u003eThe comma bar is made of SS with surface Cr coating and its diameter is Ф100mm.\u003c\/li\u003e\n\u003cli\u003eThe coating width is 50-360 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-12000 cP (recommended)\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003eEABSFLPP5L\u003c\/a\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003e\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    (3) \u003cstrong\u003eSlot Die \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e        \u003c\/strong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_05_100x100.png?v=1775688285\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф120mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 50-360 mm, which can be adjusted by the opening mouth of shims. The standard shim thickness is 0.2, 0.3, 0.4, 0.5mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_09_100x100.png?v=1775630854\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 50-12000 cP. For battery application, slurry viscosity is recommended in 2000-8000 cP. \u003c\/li\u003e\n\u003cli\u003eThe precise screw pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdclpsp?variant=47523778822374\"\u003eEASDCLPSP\u003c\/a\u003e is the best option for stable slot die coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCLPSP_main_100x100.png?v=1775691733\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor intermittent coating (or pattern coating) for cylindrical electrode application, the intermittent valve system is highly recommended. For simultaneous dual-layer coating, a customized dual-channel slot die head (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esar2rcsdh?variant=47523176710374\"\u003eESAR2RCSDH\u003c\/a\u003e) can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_10_100x100.png?v=1775633700\"\u003e     \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_15_100x100.png?v=1775662134\" alt=\"\" style=\"float: none;\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_16_100x100.png?v=1775662200\" alt=\"\" style=\"float: none;\" width=\"128\" height=\"82\"\u003e\u003c\/p\u003e\n\u003cp\u003e   (4) \u003cstrong\u003eMicrogravure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e    \u003c\/strong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_06_100x100.png?v=1775688286\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA standard microgravure rod with Ф30mm is included. The parameters, such as coating width, engraved pattern, mesh number and depth can be customized. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_12_100x100.png?v=1775634349\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 20-2000 cP.\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003eEABSFLPP5L\u003c\/a\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003e\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 331.8px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 331.8px;\"\u003e\u003cem\u003eHeating Oven Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 331.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating mode: Convection heating (hot air flow). Other heating methods of IR and UV can be customized upon request. Various heating modules are switchable.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eHeating temperature: Max.150℃\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStandard heating oven length: 4.5 m (1.5 m\/each, three heating chambers). More heating chambers can be integrated to increase the coating\/drying speed. \u003c\/li\u003e\n\u003cli\u003eThe multiple heating chamber can be used to build temperature-gradient for coating layer drying and obtain high quality battery electrodes. \u003c\/li\u003e\n\u003cli\u003eVentilation: air flow: 570m³\/h, 6\" aluminum pipe\u003c\/li\u003e\n\u003cli\u003eNMP recycler can be integrated with the R2R coater to capture and recycle the NMP solvents. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\n\u003cp\u003eTension Control System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTension range: 10-80 N (resolution is ±3 N), which is controlled by swing roller system.\u003c\/li\u003e\n\u003cli\u003eFor low-tension substrate coating (eg: separator and membrane), the specially designed low tension version is highly recommended since its lowest tension can be down to 5 N.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 187.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 187.6px;\"\u003e\u003ci\u003eGas Compressor\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 187.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMultiple gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is needed to provide 60-80 psi for pneumatic operation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 86.8px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 10px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 10px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL3550 * W1200 * H2000 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~1.5 T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1361-6463\/aafbf3\/meta\"\u003eH. Li, et al., High-performance supercapacitor carbon electrode fabricated by large-scale roll-to-roll micro-gravure printing,  J. Phys. D: Appl. Phys., 2019, 52, 115501\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/link.springer.com\/article\/10.1007\/s40095-022-00481-w\"\u003eL. A. Román-Ramírez, et al., Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium-ion batteries, International Journal of Energy and Environmental Engineering, 2022, 13, 943-953\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Doctor Blade","offer_id":47523803398374,"sku":"ESLPSMR2RCDB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma","offer_id":47523803431142,"sku":"ESLPSMR2RCRC","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Slot Die","offer_id":47523803463910,"sku":"ESLPSMR2RCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Microgravure","offer_id":47523803496678,"sku":"ESLPSMR2RCMG","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Slot Die","offer_id":47523803529446,"sku":"ESLPSMR2RCBSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma + Slot Die","offer_id":47523803562214,"sku":"ESLPSMR2RCRCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Reverse Comma + Slot Die","offer_id":47523803594982,"sku":"ESLPSMR2RCBRCSD","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLPSMR2RC_main.png?v=1775696971"},{"product_id":"esmmr2rcdhc","title":"ECS-SM Multifunctional Roll-to-Roll Coater (Max. 260 mm, Doctor Balde, Reverse Comma, Slot Die, and Microgravure) with Dual Heating Chambers, ESMMR2RCDHC","description":"\u003cp\u003eA high-end lab R2R coater normally offer interchangeable heads: (1) \u003cstrong\u003eSlot-Die Coating\u003c\/strong\u003e: The industry standard for high-precision battery electrodes. It uses a shim and a precision pump to \"meter\" the slurry. This is ideal for your NMP slurries as it minimizes solvent evaporation at the coating head. (2) \u003cstrong\u003eComma Doctor \/ Reverse Comma\u003c\/strong\u003e: Excellent for high-viscosity slurries. It uses a rotating \"comma\" roller to set the wet thickness. (3) \u003cstrong\u003eMicro-Gravure\u003c\/strong\u003e: Best for very thin coatings (like functional ceramic layers on separators or thin ion-exchange membranes). It uses a patterned roller to transfer a precise volume of liquid.\u003c\/p\u003e\n\u003cp\u003eGeneral Introduction of R2R coating methods:\u003c\/p\u003e\n\u003cp\u003e(1). \u003cstrong\u003eDoctor Blade Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_02.png?v=1775622122\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eIn a R2R setup, doctor blade coating is normally called Knife-over-Roll coating. It mainly consists of (1) \u003cstrong\u003eWeb\u003c\/strong\u003e: The aluminum or copper foil is pulled over a high-precision backup roller. (2) \u003cstrong\u003eReservoir\u003c\/strong\u003e: A \"dam\" of slurry is maintained just behind the blade. (3) \u003cstrong\u003eMetering\u003c\/strong\u003e: As the foil moves, the blade (the \"knife\") scrapes off excess slurry. The thickness of the wet coating is determined by the gap between the blade edge and the foil surface. The wet thickness T= Gap * K (where K is a factor, that is usually around 0.5 to 0.7, depending on the slurry's viscosity and the web speed.)\u003c\/p\u003e\n\u003cp\u003e(2). \u003cstrong\u003eReverse Comma Coating (also called Transfer Comma Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_03.png?v=1775622183\" alt=\"\" width=\"140\" height=\"102\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike a standard doctor blade where the foil moves under a stationary knife, a reverse comma system uses a three-roll or two-roll configuration to \"transfer\" a metered film of slurry onto the foil. The key components and features are: (1) \u003cstrong\u003eComma Roller\u003c\/strong\u003e: A high-precision steel cylinder with a \"comma-shaped\" cross-section. It doesn't move during the coating process; instead, it acts as a high-precision gate. (2) \u003cstrong\u003eApplicator (Back-up) Roller\u003c\/strong\u003e: This roller rotates in the opposite direction (reverse) to the web travel. It picks up the slurry from a reservoir and carries it toward the comma gap. (3) \u003cstrong\u003eTransfer\u003c\/strong\u003e: As the foil (web) passes between the rollers, the metered slurry is wiped onto the foil.\u003c\/p\u003e\n\u003cp\u003e(3). \u003cstrong\u003eSlot Die Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cimg height=\"105\" width=\"130\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_04.png?v=1775622901\"\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eWhile doctor blade and comma coating are \"metering\" methods (where you scrape off excess), slot-die is a \"pre-metered\" method. This means the exact volume of slurry pumped into the head is the exact volume that ends up on the foil. Normally slot die coating system consists of three main components: A high-precision pump (usually a syringe or gear pump), a slot-die head, and a back-up roller. The slot die coating head is mainly composed of (1)\u003cstrong\u003e Reservoir (Manifold)\u003c\/strong\u003e: The slurry is pumped into an internal cavity inside the die head designed to distribute the fluid evenly across the entire width. (2) \u003cstrong\u003eShim\u003c\/strong\u003e: A thin, precision-cut metal plate determines the width of the coating and the internal gap of the die. The coating bead is critical for the coating film quality, where the slurry emerges from a narrow \"slot\" and forms a liquid bridge (the \"bead\") between the die lips and the moving foil.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e(3). \u003cstrong\u003eMicrogravure Coating\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cstrong\u003e\u003cimg height=\"96\" width=\"169\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_05.png?v=1775623284\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eMicrogravure coating is a specialized roll-to-roll (R2R) technique used for extremely thin, high-precision coatings. Unlike standard gravure, which uses large rollers and a doctor blade on the foil, microgravure uses a very small diameter engraved roll that rotates in the opposite direction to the web. The R2R microgravure coating system has a small, engraved \"gravure\" roll (typically 20mm to 50mm in diameter) that is partially submerged in a slurry reservoir. There are multiple distinct features: (1) \u003cstrong\u003eEngraving Roll\u003c\/strong\u003e: The roll surface is covered in microscopic cells (patterns like honeycombs or pyramids). The \"cell volume\" determines exactly how much liquid is picked up. (2) \u003cstrong\u003eReverse Rotation\u003c\/strong\u003e: The roll rotates in the opposite direction of the foil (web). This \"kiss-coating\" action shears the liquid as it transfers, resulting in a much smoother surface than traditional gravure. (3) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e: A flexible blade scrapes the excess slurry off the roll before it touches the foil, ensuring only the liquid inside the engraved cells is transferred.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 3113.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMMR2RCDHC (ESM-MR2RC-DHC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC380V±10%, three-phases, 50\/60Hz, 11 k W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller width: 300 mm \u003c\/li\u003e\n\u003cli\u003eLoading substrate width: Max. 280 mm\u003c\/li\u003e\n\u003cli\u003eCoating width: Max. 260 mm\u003c\/li\u003e\n\u003cli\u003eMechanical coating speed: 0.01-2.0m\/min (the real coating speed depends on the slurry properties and dry oven length\/temperature)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\u003cem\u003eUnwinding\/Winding Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller diameter: 3\", mechanical expansion for tightening the loading roll substrate and collection cardboard. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. winding\/unwinding roll diameter: 250 mm \u003c\/li\u003e\n\u003cli\u003eAlignment Sensors were installed and aligning position resolution could be 0.5 mm. \u003c\/li\u003e\n\u003cli\u003eCoating Roller: Stainless Steel with surface Cr coating, Ф100mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 1917.4px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 1917.4px;\"\u003e\u003cem\u003eCoating Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 1917.4px;\"\u003e\n\u003cp\u003e   (1) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_06_100x100.png?v=1775625753\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe doctor blade is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-6000 cP (recommended, higher viscosity up to 10000-15000 cP may also work for thicker electrode).\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e or \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003eEABSFLPP5L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFPP2L_main_100x100.png?v=1775628781\"\u003e    \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFLPP5L_main_100x100.png?v=1775689239\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e    (2) \u003cstrong\u003eReverse Comma (Transfer Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e         \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_07_100x100.png?v=1775627010\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe backing roller is made of rubber (Ф100mm, pneumatic)\u003c\/li\u003e\n\u003cli\u003eThe comma bar is made of SS with surface Cr coating and its diameter is Ф100mm.\u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-12000 cP (recommended)\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    (3) \u003cstrong\u003eSlot Die \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e        \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_05_100x100.png?v=1775688285\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the opening mouth of shims. The standard shim thickness is 0.2, 0.3, 0.4, 0.5mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_09_100x100.png?v=1775630854\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 50-12000 cP. For battery application, slurry viscosity is recommended in 2000-8000 cP. \u003c\/li\u003e\n\u003cli\u003eThe precise screw pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003eEASDCPSP\u003c\/a\u003e is the best option for stable slot die coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCPSP_main_100x100.png?v=1775632530\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor intermittent coating (or pattern coating) for cylindrical electrode application, the intermittent valve system is highly recommended. For simultaneous dual-layer coating, a customized dual-channel slot die head (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esar2rcsdh?variant=47523176710374\"\u003eESAR2RCSDH\u003c\/a\u003e) can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_10_100x100.png?v=1775633700\" alt=\"\" style=\"float: none;\"\u003e     \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_15_100x100.png?v=1775662134\"\u003e    \u003cimg height=\"82\" width=\"128\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_16_100x100.png?v=1775662200\"\u003e\u003c\/p\u003e\n\u003cp\u003e   (4) \u003cstrong\u003eMicrogravure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e    \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_06_100x100.png?v=1775688286\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA standard microgravure rod with Ф30mm is included. The parameters, such as coating width, engraved pattern, mesh number and depth can be customized. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_12_100x100.png?v=1775634349\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 20-2000 cP.\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 331.8px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 331.8px;\"\u003e\u003cem\u003eHeating Oven Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 331.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating modes: \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       (1) Convection Heating + Convection Heating (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003estandard version\u003c\/span\u003e)\u003c\/p\u003e\n\u003cp\u003e       (2) Convection Heating + IR Heating (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003e       (3) Convection Heating + UV Curing (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003e       (4) IR Heating + IR Heating (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003e       (5) UV Curing + UV Curing (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003e       (6) IR Heating + UV Curing (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Temperature (Convection\/IR): Max.150℃\u003c\/li\u003e\n\u003cli\u003eThe UV intensity should be determined by customers. \u003c\/li\u003e\n\u003cli\u003eHeating oven length: 0.8 m\u003c\/li\u003e\n\u003cli\u003eVentilation: air flow: 570m³\/h (two blowers), 5\" aluminum pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\n\u003cp\u003eTension Control System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTension range: 10-60 N (resolution is ±3 N), which is controlled by swing roller system.\u003c\/li\u003e\n\u003cli\u003eFor low-tension substrate coating (eg: separator and membrane), the specially designed low tension version is highly recommended since its lowest tension can be down to 5 N.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 187.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 187.6px;\"\u003e\u003ci\u003eGas Compressor\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 187.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is needed to provide 60-80 psi for pneumatic operation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 86.8px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 10px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 10px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL2700 * W970 * H1300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~1300 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1361-6463\/aafbf3\/meta\"\u003eH. Li, et al., High-performance supercapacitor carbon electrode fabricated by large-scale roll-to-roll micro-gravure printing,  J. Phys. D: Appl. Phys., 2019, 52, 115501\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/link.springer.com\/article\/10.1007\/s40095-022-00481-w\"\u003eL. A. Román-Ramírez, et al., Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium-ion batteries, International Journal of Energy and Environmental Engineering, 2022, 13, 943-953\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Doctor Blade (Dual Convection)","offer_id":47524633575654,"sku":"ESMMR2RCDHCDB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma (Dual Convection)","offer_id":47524633608422,"sku":"ESMMR2RCDHCRC","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Slot Die (Dual Convection)","offer_id":47524633641190,"sku":"ESMMR2RCDHCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Microgravure (Dual Convection)","offer_id":47524633673958,"sku":"ESMMR2RCDHCMG","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Slot Die (Dual Convection)","offer_id":47524633706726,"sku":"ESMMR2RCDHCBSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma + Slot Die (Dual Convection)","offer_id":47524633739494,"sku":"ESMMR2RCDHCRCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Reverse Comma + Slot Die (Dual Convection)","offer_id":47524633772262,"sku":"ESMMR2RCDHCBRCSD","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RCDHC_main.png?v=1775708161"},{"product_id":"esmr2rdc","title":"ECS-SM Roll-to-Roll Dip Coater (Max. 280 mm) with Metering Wire Rod and IR Heating, ESMR2RDC","description":"\u003cp\u003eA Roll-to-Roll (R2R) Dip Coater is a classic \"immersion\" coating system where the substrate (web) is passed through a liquid bath to be coated on both sides simultaneously. While Slot-Die and Doctor Blade coating are preferred for primary electrodes, dip coating is a vital process in your research for functionalizing separators and fabricating ion-exchange membranes where full saturation or double-sided application is required.\u003c\/p\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\n\u003cp\u003eIn a R2R dip coater, the foil or membrane is guided into a reservoir (dip tank) by a series of rollers. (1)\u003cstrong\u003e Immersion\u003c\/strong\u003e: The web travels down into the coating fluid. (2) \u003cstrong\u003ePick-up\u003c\/strong\u003e: As it emerges vertically, a liquid film adheres to both sides of the substrate. (3) \u003cstrong\u003eMetering (The Landau-Levich Regime)\u003c\/strong\u003e: The final thickness is determined primarily by the withdrawal speed and the viscosity of the fluid. (4) \u003cstrong\u003eDoctoring (Optional)\u003c\/strong\u003e: Many R2R dip coaters include \"Air Knives\" or \"Squeeze Rollers\" at the exit of the tank to blow off or press out excess liquid to achieve a specific target thickness.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMR2RDC_02.png?v=1775712442\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMR2RDC (ESM-R2RDC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 3000 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRoller width: 300 mm \u003c\/li\u003e\n\u003cli\u003eLoading substrate width: Max. 280 mm\u003c\/li\u003e\n\u003cli\u003eCoating width: Max. 280 mm\u003c\/li\u003e\n\u003cli\u003eMechanical coating speed: 0.05-0.75m\/min (the real coating speed depends on the slurry properties and dry oven length\/temperature)\u003c\/li\u003e\n\u003cli\u003eThe general design drawing is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMR2RDC_03_160x160.png?v=1775717717\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eUnwinding\/Winding Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRoller diameter: 3\", mechanical expansion for tightening the loading roll substrate and collection cardboard. \u003c\/li\u003e\n\u003cli\u003eMax. winding\/unwinding roll diameter: 300 mm \u003c\/li\u003e\n\u003cli\u003eAlignment Sensors were installed and aligning position resolution could be ±0.3-0.5 mm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDip Coating Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Container Size: 0.3 L (0.7 L and 2.7 L can be supplied upon request)\u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 50-500 cP (Recommended).\u003c\/li\u003e\n\u003cli\u003eThe peristaltic pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be supplied as slurry feeder for the dip coating. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFPP2L_main_100x100.png?v=1775628781\"\u003e         \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eMetering Wire Rod\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAfter dip coating, the wet coating film will go through the metering wire rods and obtain desirable thickness. \u003c\/li\u003e\n\u003cli\u003eThe standard wire rod (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esmawrw300?variant=47525192040678\"\u003eESMAWRW300\u003c\/a\u003e) is D10 mm, effective coating length is 300 mm, and groove \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e            \u003ca href=\"https:\/\/echemsupplies.com\/products\/esmawrw300?variant=47525192040678\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMAWRW300_main_100x100.png?v=1775718854\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eHeating Oven Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHeating mode: IR heating (carbon fiber), 2 kW.\u003c\/li\u003e\n\u003cli\u003eHeating chamber length: 0.5 m\u003c\/li\u003e\n\u003cli\u003eHeating temperature: Max.150℃\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVentilation: centrifugal blower, air flow: 330m³\/h (adjustable), 3\" aluminum pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTension Control System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTension range: 10-60 N (resolution is ±3 N), which is controlled by swing roller system.\u003c\/li\u003e\n\u003cli\u003eFor low-tension substrate coating (eg: separator and membrane), the specially designed low tension version is highly recommended since its lowest tension can be down to 5 N.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is needed to provide 60-80 psi for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL980 * W750 * H1420 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~580 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0376738818305684\"\u003eM. Cook, et al., Roll-to-roll dip coating of three different PIMs for Organic Solvent Nanofiltration, Journal of Membrane Science, 2018, 558, 52-63\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1143\/JJAP.44.L126\/meta\"\u003eK. Fujimoto, et al., Fabrication of Layer-by-Layer Self-Assembly Films Using Roll-to-Roll Process, Jpn. J. Appl. Phys., 2005, 44, L126\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47524834803942,"sku":"ESMR2RDC","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMR2RDC_main.png?v=1775711266"},{"product_id":"esmeslhrp","title":"ECS-SM Hot Rolling Press (W=200mm, 80℃) with Rubber Roll for Electrode Sheet Lamination, ESMESLHRP","description":"\u003cp\u003eA Hot Rolling Press with Rubber Rollers (often referred to as a \"Soft-Nip\" calender or laminator) serves a very different purpose than the high-pressure steel-on-steel calendering used for densification.\u003c\/p\u003e\n\u003cp\u003eRubber or polymer-coated rollers provide a \"conformable\" nip. This is essential when you are laminating materials with slightly different thicknesses or surface textures. (1) Uniform Pressure Distribution: Unlike rigid steel, a rubber roller deforms slightly around the material. This ensures that a thin ion-exchange membrane is pressed evenly against an electrode, even if there are microscopic \"valleys\" in the slurry coating. (2) \u003cstrong\u003eSurface Protection\u003c\/strong\u003e: If you are laminating a delicate separator or a solid-state electrolyte layer, rubber rollers prevent \"pinholing\" or mechanical crushing that can occur with high-pressure steel. (3) \u003cstrong\u003eBubble Removal\u003c\/strong\u003e: In R2R lamination, the \"soft\" contact helps \"squeeze\" out air pockets between layers, which is critical for maintaining low interfacial resistance.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMESLHRP (ESM-ESL-HRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 600 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRoller Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller Width: 200 mm\u003c\/li\u003e\n\u003cli\u003eSubstrate Width: Max. 180 mm (Max. effective lamination width)\u003c\/li\u003e\n\u003cli\u003eSteel Roller: Φ80*220mm, surface hardness: ≥HRC58, high temperature alloy steel.\u003c\/li\u003e\n\u003cli\u003eHeating Temperature: Max:80℃, surface uniformity ≤±2.5℃\u003c\/li\u003e\n\u003cli\u003eRubber Roller: Φ80*220mm (core is stainless steel that is surface coated with EPDM rubber). \u003c\/li\u003e\n\u003cli\u003eDriven motor is Ar-gas compatible in glovebox for operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLamination Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 0.7 m\/min, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRolling Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-2.0 mm, manually adjust\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL480 * W280 * H440 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S2666248521000330\"\u003eM. Yokota, et al., Effect of roll press on consolidation and electric\/ionic-path formation of electrodes for all-solid-state battery, Journal of Power Sources Advances, 2021, 12, 100078\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admt.202400417\"\u003eR. A. Altmaier, et al.,High-Linear-Energy Layered Fiber Batteries Using Roll-to-Roll Lamination and Laser Cutting, Adv. Mater. Technology, 2024, 9, 2400417\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47525346017510,"sku":"ESMESLHRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMESLHRP_main.png?v=1775760320"},{"product_id":"ermecgchrp","title":"ECS-RM Gap-Control Hot Rolling Press (W200mm, 130°C) for Electrode Calendering, ERMECGCHRP","description":"\u003cp\u003eFor high-precision electrode calendering, transitioning from simple gap-control (setting the distance between rollers) to pressure-control is the key to achieving consistent energy density and ionic conductivity. In a pressure-controlled system, the machine uses hydraulic or servo-actuators to apply a specific, measurable force (typically in metric tons) regardless of slight variations in the initial coating thickness.\u003c\/p\u003e\n\u003cp\u003eWhen using a pressure-control press, your goal is to optimize the Packing Density (PD) = m\/(A*t). Where m is the mass of active material, A is the area, and t is the post-calendering thickness. (1) \u003cstrong\u003e10% Rule\u003c\/strong\u003e: For most lithium-ion cathodes (NMC\/LFP), aim for a thickness reduction of approximately 10–20% per pass. Attempting more can cause \"spring-back\" or delamination. (2) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: Calendering at 60-100 °C reduces the yield strength of the PVDF binder, allowing for higher density at lower pressures and reducing the risk of foil cracking. (3) \u003cstrong\u003eLinear Pressure\u003c\/strong\u003e: In production, pressure is often reported as N\/mm (force divided by the width of the electrode). Lab machines that report total \"Tons\" should be converted to linear pressure for academic reporting.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERMECGCHRP (ERM-EC-GCHRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCold Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ96 x 200 mm (effective width for hot rolling: 180 mm)\u003c\/li\u003e\n\u003cli\u003eRoller is made of Cr12Mo1V1 and surface plated with Cr layer\u003c\/li\u003e\n\u003cli\u003eSurface Hardness: HRC62, surface coating thickness: ≥10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 2-3T (gap-control, pressure cannot be adjusted)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRolling Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 130 \u003cspan\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-40 mm\/s, digital display, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-3.0 mm, manually adjustable \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL819 * W230 * H330 mm (glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~85 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process, Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"TOB","offers":[{"title":"Default Title","offer_id":47526811697382,"sku":"ERMECGCHRP","price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERMECGCHRP_02.png?v=1782234712"},{"product_id":"etlecpchrp","title":"ECS-TL Pressure-Controlled Hot Rolling Press (W=300mm, 40T, 130°C) for Electrode Calendering, ETLECPCHRP","description":"\u003cp\u003eFor high-precision electrode calendering, transitioning from simple gap-control (setting the distance between rollers) to pressure-control is the key to achieving consistent energy density and ionic conductivity. In a pressure-controlled system, the machine uses hydraulic or servo-actuators to apply a specific, measurable force (typically in metric tons) regardless of slight variations in the initial coating thickness.\u003c\/p\u003e\n\u003cp\u003eWhen using a pressure-control press, your goal is to optimize the Packing Density (PD) = m\/(A*t). Where m is the mass of active material, A is the area, and t is the post-calendering thickness. (1) \u003cstrong\u003e10% Rule\u003c\/strong\u003e: For most lithium-ion cathodes (NMC\/LFP), aim for a thickness reduction of approximately 10–20% per pass. Attempting more can cause \"spring-back\" or delamination. (2) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: Calendering at 60-100 °C reduces the yield strength of the PVDF binder, allowing for higher density at lower pressures and reducing the risk of foil cracking. (3) \u003cstrong\u003eLinear Pressure\u003c\/strong\u003e: In production, pressure is often reported as N\/mm (force divided by the width of the electrode). Lab machines that report total \"Tons\" should be converted to linear pressure for academic reporting.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eETLECPCHRP (ETL-EC-PCHRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHot Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ196 x 330 mm (effective width for hot rolling: 300 mm)\u003c\/li\u003e\n\u003cli\u003eRoller is made of 9Cr3Mo, hard chromium plating surface thickness ≥0.15mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHRC65~70, hardness layer thickness ≥15mm\u003c\/li\u003e\n\u003cli\u003e1.5KW AC frequency conversion motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHydraulic Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 40T, adjustable in HMI touch screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRolling Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 130 \u003cspan\u003e°C (inner heating rods)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.3-4 m\/min, digital display, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-3 mm, manually adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Effect\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAfter calendering, the electrode uniformity≤±0.002mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is needed to provide a gas pressure of 60-80 psi for pneumatic operaiton.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRoll-to-Roll Integration (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA roll-to-roll unit can be integrated with the hot rolling press for electrode roll calendering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETLECPCHRP_02_100x100.png?v=1775759197\" alt=\"\" style=\"float: none;\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETLECPCHRP_03_100x100.png?v=1775759197\" alt=\"\" style=\"float: none;\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETLECPCHRP_04_100x100.png?v=1775759282\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1400 * W500 * H1300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~550 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process, Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"TOB","offers":[{"title":"Default Title","offer_id":47526883655910,"sku":"ETLECPCHRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETLECPCHRP_main.png?v=1775838909"},{"product_id":"essecgchrp","title":"ECS-SS Gap-Control Hot Rolling Press (W130mm, 200℃) with Tension-Controller for Electrode Calendering (Ar-Glovebox Compatible), ESSECGCHRP","description":"\u003cp\u003eFor high-precision electrode calendering, transitioning from simple gap-control (setting the distance between rollers) to pressure-control is the key to achieving consistent energy density and ionic conductivity. In a pressure-controlled system, the machine uses hydraulic or servo-actuators to apply a specific, measurable force (typically in metric tons) regardless of slight variations in the initial coating thickness.\u003c\/p\u003e\n\u003cp\u003eWhen using a pressure-control press, your goal is to optimize the Packing Density (PD) = m\/(A*t). Where m is the mass of active material, A is the area, and t is the post-calendering thickness. (1) \u003cstrong\u003e10% Rule\u003c\/strong\u003e: For most lithium-ion cathodes (NMC\/LFP), aim for a thickness reduction of approximately 10–20% per pass. Attempting more can cause \"spring-back\" or delamination. (2) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: Calendering at 60-100 °C reduces the yield strength of the PVDF binder, allowing for higher density at lower pressures and reducing the risk of foil cracking. (3) \u003cstrong\u003eLinear Pressure\u003c\/strong\u003e: In production, pressure is often reported as N\/mm (force divided by the width of the electrode). Lab machines that report total \"Tons\" should be converted to linear pressure for academic reporting.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSECGCHRP (ESS-EC-GCHRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1900 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHot Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ98 x 142 mm (effective hot rolling width: 130 mm)\u003c\/li\u003e\n\u003cli\u003eRoller is made of Cr12Mo1V1 and surface plated with Cr layer\u003c\/li\u003e\n\u003cli\u003eSurface Hardness: HRC58～60, surface coating thickness: 100-150 um\u003c\/li\u003e\n\u003cli\u003eHeating temperature: Max:200℃, temperature uniformity:≤±3℃\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-30 mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-2.3 mm, manually adjust (Max. calculated pressure: 2T, not adjustable)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRoll-to-Roll Integration\u003c\/span\u003e (Optional)\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA roll-to-roll unit can be integrated with the hot rolling press for continuous calendering. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSECGCHRP_02_100x100.png?v=1775762429\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003cli\u003eIt is Ar-filled glovebox compatible since the special motor was adopted to avoid AC arc generation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL440 * W390 * H590 mm (press only)\u003c\/li\u003e\n\u003cli\u003eL480 * W280 * H270 mm (control box only)\u003c\/li\u003e\n\u003cli\u003eL300 * W300 * H270 mm (winding\/unwinding unit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~60 kg (press) + 14 kg (controller) + 50 kg (unwinding\/winding)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process,Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47526945751270,"sku":"ESSECGCHRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSECGCHRP_main.png?v=1775761711"},{"product_id":"essdbehrpars","title":"ECS-SS Hot Rolling Press (W=100mm, 120℃) with Asynchronous Rolling Speed for Dry Battery Electrode (DBE), ESSDBEHRPARS","description":"\u003cp\u003eIn the fabrication of dry battery electrodes—where active materials, conductive agents, and PTFE binders are \"fibrillated\" without the use of NMP solvent—the Asynchronous Rolling Speed (ARS) press is a sophisticated tool. Unlike standard calendering where both rollers spin at the exact same velocity, ARS introduces a controlled speed differential between the top and bottom rollers. This creates mechanical shear at the nip, which is the secret to high-performance dry-film electrodes.\u003c\/p\u003e\n\u003cp\u003eDry electrode technology relies on the fibrillation of PTFE. When you apply both compression and shear, the PTFE particles stretch into a microscopic \"spider-web\" matrix that holds the active material together. (1)\u003cstrong\u003e Shear-Induced Fibrillation\u003c\/strong\u003e: By spinning one roller faster than the other (e.g., a ratio of 1.1:1 or 1.2:1), the material is \"smeared\" slightly as it is crushed. This maximizes the fibrillation of the binder, creating a stronger, more flexible dry film. (2) \u003cstrong\u003eSurface Smoothing\u003c\/strong\u003e: ARS can help eliminate \"orange peel\" textures on the surface of the dry electrode, leading to more uniform contact with the current collector. (3) \u003cstrong\u003eOrientation Control\u003c\/strong\u003e: The speed differential helps orient the polymer chains in the direction of the rolling, which can improve the mechanical tensile strength of the free-standing dry film.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSDBEHRPARS (ESS-DBE-HRPARS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHot Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ95×115mm mm (effective hot rolling width: 100 mm)\u003c\/li\u003e\n\u003cli\u003eRoller is made of alloy stainless steel and surface plated with Cr layer\u003c\/li\u003e\n\u003cli\u003eSurface Hardness: HRC60～62, surface coating thickness: ≥10mm, Ra=0.4\u003c\/li\u003e\n\u003cli\u003eHeating temperature: Max:120℃ (independently controlled)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.05- 1 m\/min (step motor)\u003c\/li\u003e\n\u003cli\u003eTwo rolling speeds of upper and bottom rollers is independently controlled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\/Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-0.5 mm, digital adjustable (0.001mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo pressurized modes: \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           For small pressure (20-80 kg), adjustable\u003c\/p\u003e\n\u003cp\u003e           For large pressure, gap-controlled, not adjustable (Max. 2T)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cp\u003e \u003cstrong\u003eDry electrode fabrication processes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e(1) Powder Mixing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe active material (eg: graphite, LFP, NMC) is mixed with conductive carbon at medium level speed, and then add the PTFE into the mixture and mix it at a low speed (Temperature=10-15℃). Finally a high speed mixing was conducted in a short time to generate partially PTFE fibrillation.  \u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSDBEHRPARS_02_100x100.png?v=1775771743\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e(2) Sheet Formation\u003c\/strong\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e  \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlace the powder mixture onto an Al foil and make a rough rectangular shape (Initial thickness~3-5 mm). A kneading roller can be used to slightly press the loose film back and forth until a rigid film was formed (film thickness 0.5-1.0 mm). \u003c\/p\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSDBEHRPARS_03_100x100.png?v=1775771743\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e(3) Sheet Rolling Press\u003c\/strong\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSend the above dry film that covered with two Al foils into the rollers under asynchronous rolling speed (eg: 1:1.1 or 1:1.2). The rolling pressure always keeps in the range of 60-80 kgf (Overpressure will damage\/crush the self-standing film). The rolling temperature is 80-100 ℃. Ideally the gap reduction decrement would be 20-30 um. \u003c\/p\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSDBEHRPARS_04_100x100.png?v=1775772428\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e(4) Electrode Lamination\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe thin self-standing dry film can be further laminated (same speed) with carbon-coated foil to form the complete dry battery electrode.   \u003c\/p\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSDBEHRPARS_05_100x100.png?v=1775772717\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL420 * W345 * H400 mm (press only)\u003c\/li\u003e\n\u003cli\u003eL200 * W500 * H440 mm (controller only)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~62 kg (press) + 20 kg (controller))\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admt.202501420\"\u003eJ. Yu, et al., Dry Electrode Processing for Lithium-Ion Battery Cathodes and Anodes: Materials, Fabrication Strategies, and Future Outlook, Adv. Mater. Technologies, 2025, 10, e01420\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.rsc.org\/en\/content\/articlehtml\/2025\/sc\/d5sc00059a\"\u003eJ. Park, et al., Sustainable and cost-effective electrode manufacturing for advanced lithium batteries: the roll-to-roll dry coating process, Chem. Sci., 2025, 16, 6598-6619\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47527035994342,"sku":"ESSDBEHRPARS","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSDBEHRPARS_main.png?v=1775771649"},{"product_id":"eslecpchrp","title":"ECS-SL Pressure-Controlled Hot Rolling Press (W=300mm, 30T, 150°C) for Electrode Calendering, ESLECPCHRP","description":"\u003cp\u003eFor high-precision electrode calendering, transitioning from simple gap-control (setting the distance between rollers) to pressure-control is the key to achieving consistent energy density and ionic conductivity. In a pressure-controlled system, the machine uses hydraulic or servo-actuators to apply a specific, measurable force (typically in metric tons) regardless of slight variations in the initial coating thickness.\u003c\/p\u003e\n\u003cp\u003eWhen using a pressure-control press, your goal is to optimize the Packing Density (PD) = m\/(A*t). Where m is the mass of active material, A is the area, and t is the post-calendering thickness. (1) \u003cstrong\u003e10% Rule\u003c\/strong\u003e: For most lithium-ion cathodes (NMC\/LFP), aim for a thickness reduction of approximately 10–20% per pass. Attempting more can cause \"spring-back\" or delamination. (2) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: Calendering at 60-100 °C reduces the yield strength of the PVDF binder, allowing for higher density at lower pressures and reducing the risk of foil cracking. (3) \u003cstrong\u003eLinear Pressure\u003c\/strong\u003e: In production, pressure is often reported as N\/mm (force divided by the width of the electrode). Lab machines that report total \"Tons\" should be converted to linear pressure for academic reporting.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLECPCHRP (ESL-EC-PCHRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, three-phases, 50\/60Hz, 8000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHot Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ196 x 320 mm (effective width for hot rolling: 300 mm)\u003c\/li\u003e\n\u003cli\u003e9Cr3Mo, surface coated with chromium layer with a thickness of \u0026gt;0.08mm\u003c\/li\u003e\n\u003cli\u003eHRC65~70, hardness layer thickness ≥15mm\u003c\/li\u003e\n\u003cli\u003e1.5KW AC frequency conversion motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHydraulic Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 30T, adjustable in HMI touch screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRolling Temperature\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 150 \u003cspan\u003e°C (IR heating tubes)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThese IR heating tubes are easily installed and replaced.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e          \u003c\/span\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLECPCHRP_03_100x100.png?v=1775836717\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e     \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLECPCHRP_04_100x100.png?v=1775836894\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-4.8 m\/min, digital display, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-3 mm, manually adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Effect\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e± 3μm (Only if the uniformity of the sample is ≤ ±2μm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRoll-to-Roll Integration (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA roll-to-roll unit can be integrated with the hot rolling press for electrode roll calendering \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: start;\"\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLECPCHHRP_05_160x160.png?v=1775837521\" style=\"margin-bottom: 16px; float: none;\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLECPCHRP_02_100x100.png?v=1775796965\" alt=\"\" style=\"float: none;\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1240 * W600 * H980 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~800 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process, Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47529565946086,"sku":"ESLECPCHRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLECPCHRP_main.png?v=1775796718"},{"product_id":"esmechpccrp","title":"ECS-SM High-Pressure-Controlled Cold Rolling Press (W=200mm, 80T) for Electrode Calendering, ESMECHPCCRP","description":"\u003cp\u003eIn high-precision electrode manufacturing, High-Pressure Controlled Cold Rolling (Calendering) is the standard method for densifying electrodes that do not require thermal assistance or where heat might negatively affect the binder\/active material interface. While hot rolling is popular for dry electrodes and PVDF softening, Cold Rolling is often preferred for maintaining the mechanical crystal structure of certain active materials and for processes where high-throughput consistency is the priority.\u003c\/p\u003e\n\u003cp\u003eCold rolling relies purely on linear pressure to reduce the thickness and porosity of the electrode. (1) \u003cstrong\u003ePorosity Control\u003c\/strong\u003e: The primary goal is to reach a \"target porosity\" (typically 25%–35%). This balance is critical: too high, and the energy density is low; too low, and the electrolyte cannot penetrate the pores, leading to poor performance on your Neware testers. (2) \u003cstrong\u003eElastic Recovery\u003c\/strong\u003e: Because the process is cold, the material may experience more \"spring-back\" (elastic recovery) once it leaves the nip. To compensate, the gap must be set slightly tighter than the final desired thickness.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMECHPCRP (ESM-EC-HPCCRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single-phase, 50\/60Hz, 1000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCold Rollers\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ230x220mm mm (effective width for cold rolling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e200 mm\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003e9Cr3Mo, surface coated with chromium layer with a thickness of  ≥0.1mm\u003c\/li\u003e\n\u003cli\u003eHRC65~70, hardness layer thickness ≥18mm\u003c\/li\u003e\n\u003cli\u003e0.75 KW AC frequency conversion motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHydraulic Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 80T, adjustable in HMI touch screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.3-5.0 m\/min, digital display, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-1.5 mm, manually adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Effect\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e± 2 μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRoll-to-Roll Integration (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA roll-to-roll unit can be integrated with the hot rolling press for electrode roll calendering \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: start;\"\u003e        \u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLECPCHHRP_05_160x160.png?v=1775837521\"\u003e    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMECHPCCRP_03_160x160.png?v=1775842101\" style=\"margin-bottom: 16px; float: none;\"\u003e    \u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1000 * W600 * H980 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~845 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process, Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47530463297766,"sku":"ESMECHPCCRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMECHPCCRP_main.png?v=1775841618"},{"product_id":"eslechpccrp","title":"ECS-SL High-Pressure-Controlled Cold Rolling Press (W=350mm, 100T) for Electrode Calendering, ESLECHPCCRP","description":"\u003cp\u003eIn high-precision electrode manufacturing, High-Pressure Controlled Cold Rolling (Calendering) is the standard method for densifying electrodes that do not require thermal assistance or where heat might negatively affect the binder\/active material interface. While hot rolling is popular for dry electrodes and PVDF softening, Cold Rolling is often preferred for maintaining the mechanical crystal structure of certain active materials and for processes where high-throughput consistency is the priority.\u003c\/p\u003e\n\u003cp\u003eCold rolling relies purely on linear pressure to reduce the thickness and porosity of the electrode. (1) \u003cstrong\u003ePorosity Control\u003c\/strong\u003e: The primary goal is to reach a \"target porosity\" (typically 25%–35%). This balance is critical: too high, and the energy density is low; too low, and the electrolyte cannot penetrate the pores, leading to poor performance on your Neware testers. (2) \u003cstrong\u003eElastic Recovery\u003c\/strong\u003e: Because the process is cold, the material may experience more \"spring-back\" (elastic recovery) once it leaves the nip. To compensate, the gap must be set slightly tighter than the final desired thickness.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESLECHPCCRP (ESL-EC-HPCCRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V or AC380V±10%, single-phase, 50\/60Hz, 6000 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCold Roller\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eΦ320x370mm mm (effective width for cold rolling: \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e350 mm\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003e9Cr3Mo, surface coated with chromium layer with a thickness of  ≥0.08mm\u003c\/li\u003e\n\u003cli\u003eHRC65~70, hardness layer thickness ≥18mm\u003c\/li\u003e\n\u003cli\u003e5.5 KW AC frequency conversion motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHydraulic Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100T, adjustable in HMI touch screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.3-8.0 m\/min, digital display, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Gap\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-1.5 mm, digital display and adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eCalendering Effect\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e± 2 μm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRoll-to-Roll Integration (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional\u003c\/span\u003e)\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA roll-to-roll unit can be integrated on the cold rolling press for electrode roll calendering \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: start;\"\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLECHPCCRP_02_100x100.png?v=1775843588\" style=\"margin-bottom: 16px; float: none;\"\u003e    \u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eNote\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEach time the reduced thickness is 20%-25%. Multiple-rounds calendering is needed for higher coating thickness reduction. For example, the initial electrode thickness is 200 um, then 180 um, 160 um, 140 um and so on under a certain pressure. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1600 * W840 * H1750 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~2.3 T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591022007136\"\u003eJ. Zhang, et al., Investigation on mechanical and microstructural evolution of lithium-ion battery electrode during the calendering process, Powder Technology, 2022, 409, 117828\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/full\/10.1002\/aenm.202300973\"\u003eM. Abdollahifar, et al., Insights into Influencing Electrode Calendering on the Battery Performance, Adv Energy Mater., 2023, 13, 2300973\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47530533912806,"sku":"ESLECHPCCRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESLECHPCCRP_main.png?v=1775844199"},{"product_id":"essbpeddvo","title":"ECS-SS Dual Vacuum Oven (200°C, 2×50 L) for Battery Powder and Electrode Drying, ESSBPEDDVO","description":"\u003cp\u003eIn battery research, a vacuum oven is critical for removing trace moisture from powders (active materials) and electrodes (coated foils) without causing oxidation. For lithium-ion systems, the goal is typically to achieve moisture levels below 50 ppm for electrodes and below 10 ppm for finished cells.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESSBPEDDVO (ESS-BPED-DVO)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2200 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTemperature Range\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 200 °C (resolution: ±1℃)\u003c\/li\u003e\n\u003cli\u003eTwo separate chambers (independent temperature control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e≤-0.1 MPa (≤133 Pa) (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ethe vacuum pump is not included, which should be additionally purchased\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003ePlease consider the vacuum pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo vacuum pumps are required. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInside Chamber Material\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSUS304\u003c\/li\u003e\n\u003cli\u003eTwo shelves are included for placing drying stuff. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL450 * W450* H450 mm (each chamber)\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Material\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSS304 (2 shelves included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL740 * W930 * H1440 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~250 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/chemistry-europe.onlinelibrary.wiley.com\/doi\/full\/10.1002\/batt.202100088\"\u003eF. Huttner, et al., Design of Vacuum Post-Drying Procedures for Electrodes of Lithium-Ion Batteries, Batteries \u0026amp; Supercaps, 2021, 4, 1499-1515\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591020306690\"\u003eF. Zhao, et al., A novel online moisture monitoring method for vacuum drying of lithium ion battery powder, Powder Technology, 2020, 375, 244-248\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47531523342566,"sku":"ESSBPEDDVO","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSBPEDDVO_main.png?v=1775885188"},{"product_id":"esmbpedvo4c","title":"ECS-SM Vacuum Oven with Four Independent Chambers (150°C, 4×200 L) for Battery Powder and Electrode Drying, ESMBPEDVO4C","description":"\u003cp\u003eIn battery research, a vacuum oven is critical for removing trace moisture from powders (active materials) and electrodes (coated foils) without causing oxidation. For lithium-ion systems, the goal is typically to achieve moisture levels below 50 ppm for electrodes and below 10 ppm for finished cells.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 201.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMBPEDVO4C (ESM-BPED-VO4C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC380V±10%, three-phases, 50\/60Hz, 27 kW \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTemperature Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 150 °C (≤±5℃)\u003c\/li\u003e\n\u003cli\u003eFour separate chambers with independent temperature control\u003c\/li\u003e\n\u003cli\u003eElectric resistant heating + external hot air circulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e≤-0.1 MPa (≤133 Pa) (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ethe vacuum pump is not included, which should be additionally purchased\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003ePlease consider the vacuum pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFour vacuum pumps are required. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eConnection Ports\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum port: DN20\u003c\/li\u003e\n\u003cli\u003eDry gas filling port: 12 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eD600 * H700 mm (cylindrical shape, 200 L\/each chamber)\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL2230 * W1220 * H1990 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~1150 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/chemistry-europe.onlinelibrary.wiley.com\/doi\/full\/10.1002\/batt.202100088\"\u003eF. Huttner, et al., Design of Vacuum Post-Drying Procedures for Electrodes of Lithium-Ion Batteries, Batteries \u0026amp; Supercaps, 2021, 4, 1499-1515\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591020306690\"\u003eF. Zhao, et al., A novel online moisture monitoring method for vacuum drying of lithium ion battery powder, Powder Technology, 2020, 375, 244-248\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47531552866534,"sku":"ESMBPEDVO4C","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMBPEDVO4C_main.png?v=1775886748"},{"product_id":"esmbpedhvo2c","title":"ECS-SM High Vacuum Oven with Dual Chambers (100°C, 2×190 L, ≤10 Pa) for Battery Powder and Electrode Drying, ESMBPEDHVO2C","description":"\u003cp\u003eIn battery research, a vacuum oven is critical for removing trace moisture from powders (active materials) and electrodes (coated foils) without causing oxidation. For lithium-ion systems, the goal is typically to achieve moisture levels below 50 ppm for electrodes and below 10 ppm for finished cells.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMBPEDHVO2C (ESM-BPED-HVO2C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC380V±10%, three-phases, 50\/60Hz, 34 kW (heating oven: 19.5 kW, cooling blower: 5.5 kW, vacuum system: 9 kW)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTemperature Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 100 °C (≤±2.5℃)\u003c\/li\u003e\n\u003cli\u003eTwo separate chambers with independent temperature control\u003c\/li\u003e\n\u003cli\u003eElectric resistant heating + external hot air circulation\u003c\/li\u003e\n\u003cli\u003eHeating rate: RT-80℃≤ 40 min\u003c\/li\u003e\n\u003cli\u003eCooling mode: cooling air for external tunnels + alternative gas filling\/vacuum inside chamber.\u003c\/li\u003e\n\u003cli\u003eCooling rate: 100-55℃\u0026lt;90 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e≤10 Pa) (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ethe vacuum pump is not included, which should be additionally purchased\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003ePlease consider the large vacuum pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/eldsrvvp?variant=47531598119142\"\u003eELDSRVVP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo vacuum pumps are required. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELDSRVVP_main_100x100.png?v=1775888800\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eSafety Protection\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen overheating happens, the power will be shut down\u003c\/li\u003e\n\u003cli\u003eOvercurrent and short-circuit protection on electric heating tubes\u003c\/li\u003e\n\u003cli\u003eOvercurrent and short-circuit protection on inner circulation blower.\u003c\/li\u003e\n\u003cli\u003eOvercurrent and short-circuit protection on control system.\u003c\/li\u003e\n\u003cli\u003eOverpressure protection by automatically close the gas inlet valve.\u003c\/li\u003e\n\u003cli\u003eTime setting alarm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eConnection Port\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum port: KF40\u003c\/li\u003e\n\u003cli\u003eDry gas filling port: 12 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInside Chamber Material\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSS304, thickness: 3.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to provide ~80 psi for pneumatic valves operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eW840mm * D650mm * H350 mm (~190 L\/each chamber)\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eW1390 * D1400 * H1900 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~985 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/chemistry-europe.onlinelibrary.wiley.com\/doi\/full\/10.1002\/batt.202100088\"\u003eF. Huttner, et al., Design of Vacuum Post-Drying Procedures for Electrodes of Lithium-Ion Batteries, Batteries \u0026amp; Supercaps, 2021, 4, 1499-1515\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591020306690\"\u003eF. Zhao, et al., A novel online moisture monitoring method for vacuum drying of lithium ion battery powder, Powder Technology, 2020, 375, 244-248\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47531691704550,"sku":"ESMBPEDHVO2C","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMBPEDHVO2C_main.png?v=1775892864"},{"product_id":"esmbpedvo3c","title":"ECS-SM Vacuum Oven with Triple Chambers (150°C, 3×120 L) for Battery Powder and Electrode Drying, ESMBPEDVO3C","description":"\u003cp\u003eIn battery research, a vacuum oven is critical for removing trace moisture from powders (active materials) and electrodes (coated foils) without causing oxidation. For lithium-ion systems, the goal is typically to achieve moisture levels below 50 ppm for electrodes and below 10 ppm for finished cells.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMBPEDVO3C (ESM-BPED-VO3C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC380V±10%, three-phases, 50\/60Hz, 25 kW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eTemperature Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 150 °C (≤±3℃)\u003c\/li\u003e\n\u003cli\u003eThree separate chambers with independent temperature control\u003c\/li\u003e\n\u003cli\u003eElectric resistant heating + external hot air circulation\u003c\/li\u003e\n\u003cli\u003eHeating rate: RT-150℃≤ 40 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eVacuum Level\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e≤-0.1 MPa (≤133 Pa) (\u003cspan\u003ethe vacuum pump is not included, which should be additionally purchased\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003ePlease consider the vacuum pump\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThree vacuum pumps are required. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EDSRVVP_main_100x100.png?v=1775410712\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInert Gas Port\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn inert gas inlet port is designed to flow Ar\/N2 gases into the vacuum oven for temperature sensitive material drying\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInside Chamber Material\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eSS304, thickness: 3.0 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to provide ~80 psi for pneumatic valves operation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eInner Chamber Size\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eW800mm * D500mm * H300 mm (~120 L\/each chamber)\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eW1500 * D1050 * H1900 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~800 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/chemistry-europe.onlinelibrary.wiley.com\/doi\/full\/10.1002\/batt.202100088\"\u003eF. Huttner, et al., Design of Vacuum Post-Drying Procedures for Electrodes of Lithium-Ion Batteries, Batteries \u0026amp; Supercaps, 2021, 4, 1499-1515\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0032591020306690\"\u003eF. Zhao, et al., A novel online moisture monitoring method for vacuum drying of lithium ion battery powder, Powder Technology, 2020, 375, 244-248\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47531773984998,"sku":"ESMBPEDVO3C","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMBPEDVO3C_main.png?v=1775893894"},{"product_id":"esmelr2rhrp","title":"ECS-SM Roll-to-Roll Hot Rolling Press (W=200mm, 120℃) for Electrode Lamination, ESMELR2RHRP","description":"\u003cp\u003eA roll-to-roll hot rolling press is engineered to create a permanent, low-resistance interface between two distinct layers using a combination of heat and moderate pressure.\u003c\/p\u003e\n\u003cp\u003eLamination in a battery pilot line typically involves bonding a free-standing active material (like a dry electrode film) to a foil that has been pre-coated with a thin conductive \"tie-layer\" or primer. (1) \u003cstrong\u003eThermal Softening\u003c\/strong\u003e: The rollers heat the binder (usually PTFE for dry processes or PVDF for wet) to its glass transition temperature (Tg). (2) \u003cstrong\u003eInterfacial Fusion\u003c\/strong\u003e: Under pressure, the softened binder chains interpenetrate the primer layer on the foil, creating a mechanical and electrical \"weld.\" (3) \u003cstrong\u003eNip Geometry\u003c\/strong\u003e: The rollers must maintain a perfectly uniform \"nip\" to ensure that the lamination strength is consistent across the entire width of the R2R line.\u003c\/p\u003e\n\u003ctable style=\"height: 201.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 35.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 35.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMELR2RHRP (ESM-EL-R2RHRP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz,3850 W \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRoller Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller Width: 200 mm\u003c\/li\u003e\n\u003cli\u003eSubstrate Width: Max. 180 mm (Max. effective lamination width)\u003c\/li\u003e\n\u003cli\u003eOne steel (DC53) Roller and one EPDM rubber roller: Φ120*200mm\u003c\/li\u003e\n\u003cli\u003eHeating Temperature: Max: 120℃, adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eLamination Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 5 m\/min, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eRolling Gap\/Pressure\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eGap: 0-2.0 mm, manually adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePressure: Max. 0.6 T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eUnwinding\/Winding Rollers\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCore Cardboard: 3\"\u003c\/li\u003e\n\u003cli\u003eRoll Diameter: Max. Ф200mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is required to provide a pressure of 60-80 psi for pneumatic operation.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1000 * W860 * H1500 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~600 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S2666248521000330\"\u003eM. Yokota, et al., Effect of roll press on consolidation and electric\/ionic-path formation of electrodes for all-solid-state battery, Journal of Power Sources Advances, 2021, 12, 100078\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admt.202400417\"\u003eR. A. Altmaier, et al., High-Linear-Energy Layered Fiber Batteries Using Roll-to-Roll Lamination and Laser Cutting, Adv. Mater. Technology, 2024, 9, 2400417\u003c\/a\u003e.\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47532421349606,"sku":"ESMELR2RHRP","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMELR2RHRP_main.png?v=1776018661"},{"product_id":"ermhsdm","title":"ECS-R Mini High-Speed (Max. 10000 rpm) Dispensing Mixer (300 mL), ERMHSDM","description":"\u003cp\u003eA 10,000 RPM High-Speed Dispersing Mixer (often called a high-speed dissolver or homogenizer) is a precision laboratory or pilot-scale instrument designed to break down agglomerates, wet out solid powders into liquids, and create highly stable suspensions or emulsions. At 10,000 RPM, the tip speed of the blade creates immense shear forces, which is particularly critical when preparing high-viscosity slurries, such as those used in advanced battery electrodes, fuel cell inks, or ceramic suspensions.\u003c\/p\u003e\n\u003cp\u003eUnlike a standard paddle mixer that simply circulates material, a dispersing mixer relies on hydraulic shear. (1) \u003cstrong\u003eSawtooth Blade (Cowles Dissolver)\u003c\/strong\u003e: The most common geometry is a flat blade with directional \"teeth\" along the edge. (2) \u003cstrong\u003eSuction Effect\u003c\/strong\u003e: As the blade rotates at high speeds (up to 10,000 RPM), it draws liquid and solids toward the center of the disc and flings them outward radially. (3) \u003cstrong\u003eHigh-Shear Zone\u003c\/strong\u003e: The highest shear occurs just millimeters away from the edges of the teeth. This velocity gradient tears apart agglomerated particles (like carbon black, carbon nanotubes, or active material powders) and forces them into a uniform state.\u003c\/p\u003e\n\u003ctable style=\"height: 469.2px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERMHSDM (ER-MHSDM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or 220V±10%, single phase, 50\/60Hz, 750 W \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eDispersing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e100-10000 rpm\u003c\/li\u003e\n\u003cli\u003eThe maximum line speed is 33.49 m\/s\u003c\/li\u003e\n\u003cli\u003eDiameter of Dispersing Blade: Φ64 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-300 s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 10px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 10px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 300 mL    \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_03_100x100.png?v=1774639286\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ELSHSDSVSM_04_100x100.png?v=1774639294\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL250 * W295 * H430 mm (antechamber and glovebox-compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~10 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47686533578982,"sku":"ERMHSDM","price":6999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERMHSDM_main.png?v=1779075699"},{"product_id":"eressvsm","title":"ECS-R Economic Single-Shaft Vacuum Slurry Mixer (1400 rpm, 250 mL), ERESSVSM","description":"\u003cp\u003eAn economic vacuum slurry mixer (often referred to as a compact or benchtop vacuum mixer) is a staple for laboratory-scale R\u0026amp;D and small-scale prototyping, particularly for battery electrode preparation (lithium-ion, sodium-ion, solid-state) and ceramic slurries. When searching for an \"economic\" model, the goal is to balance affordability with the two features critical to slurry quality: effective de-agglomeration (homogenization) and void-free degassing (vacuum).\u003c\/p\u003e\n\u003cp\u003eIn an economic single-shaft setup, the design is simplified to minimize mechanical failure points and reduce manufacturing costs: (1) \u003cstrong\u003eVacuum Cap\/Lid\u003c\/strong\u003e: The mixing shaft passes through a specialized high-speed dynamic seal (usually an oil seal or mechanical face seal) embedded in a heavy-duty lid. This lid clamps securely onto the mixing cup using a silicone or Viton O-ring. (2) \u003cstrong\u003eHigh-Shear Dispersion\u003c\/strong\u003e: The single shaft spins at high velocities (typically 100 to 5,000+ RPM). The sawtooth blade flings the slurry radially outward, creating a vortex that pulls dry powders down into the high-shear zone for rapid wetting and de-agglomeration. (3) \u003cstrong\u003eSimultaneous Degassing\u003c\/strong\u003e: Connectors on the lid attach to a vacuum line. Drawing a vacuum (typically -0.08 to -0.095 MPa) while the vortex is active allows entrapped air bubbles to expand, rise to the surface, and burst instantly, ensuring a highly dense, defect-free slurry for downstream coating.\u003c\/p\u003e\n\u003ctable style=\"height: 844.6px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERESSVSM (ER-ESSVSM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 150 W\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1000 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax Speed: 1400 rpm, adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-9999 min\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 385.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 385.4px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 385.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel Jar volume: 250 mL (other volumes of 50, 100, 150 mL with single mixing shaft\/impeller are available upon request)\u003c\/li\u003e\n\u003cli\u003eFor 250 mL mixing jar, the dual-shaft design with stirring and dispersing features is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg height=\"88\" width=\"88\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREDSPVSM_02_100x100.png?v=1779083290\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor 50, 100, and 150 mL mixing jars, the single shaft with stirring impeller is shown below:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERESSVSM_02_100x100.png?v=1779090463\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in single-stage vacuum pump\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -80 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL245 * W260 * H490 mm (Antechamber and Glovebox-Compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~14 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47688186593510,"sku":"ERESSVSM","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERESSVSM_main.png?v=1779090327"},{"product_id":"erepvcm","title":"ECS-R Economic Planetary Vacuum Centrifugal Mixer (2000 rpm, 2*150 or 2*300 mL), EREPVCM","description":"\u003cp\u003eA Planetary Vacuum Centrifugal Mixer (often called a dual-asymmetric centrifugal mixer or a bladeless mixer) represents the pinnacle of premium mixing technology for highly viscous, sensitive, or hard-to-disperse materials. Unlike traditional mixers that use a spinning blade to shear material, a planetary centrifugal mixer uses no blades. Instead, it relies on the physics of dual-axis rotation combined with a deep vacuum to simultaneously mix, de-agglomerate, and completely de-aerate materials within minutes.\u003c\/p\u003e\n\u003cp\u003eThe planetary vacuum machine operates on a dual-rotation mechanism mimicking planetary motion: (1) \u003cstrong\u003eRevolution (The \"Orbit\")\u003c\/strong\u003e: The container holder revolves around a central axis at high speed, generating massive centrifugal force (often exceeding 400 times g). This forces the material outward and downward against the walls of the mixing cup. (2) \u003cstrong\u003eRotation (The \"Spin\")\u003c\/strong\u003e: Simultaneously, the container spins on its own axis at a specific ratio (typically around 1:1 or 2:3 relative to the revolution speed).\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 769.3px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEREPVCM (ER-EPVCM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 500 W (2*150 mL), or 1350 W (2*300 mL)\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1500 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRevolution Speed: Max. 2000 rpm (line speed: 5.4 m\/s), adjustable\u003c\/li\u003e\n\u003cli\u003eSelf-Rotation Speed: 0.5 times of revolution speed, Max. 1000 rpm\u003c\/li\u003e\n\u003cli\u003eA 400\/750 W servo motor is used to drive the mixing impeller. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0-600 s for three-segments (each segment is 200 s). \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 212.1px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 212.1px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 212.1px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eStainless Steel Jar Volume: (1) 2*150 mL, its size is Ф60*H75 mm; (2) 2*300 mL, its size is Ф77*H58 mm;\u003c\/li\u003e\n\u003cli\u003eOther smaller volumes of 10, 30, 50 mL, and 100 mL are available upon request)\u003c\/li\u003e\n\u003cli\u003eMax processing capacity is 2*150 g or 2*300 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_02_100x100.png?v=1779111199\"\u003e        \u003cimg height=\"66\" width=\"90\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_03_100x100.png?v=1779111200\"\u003e         \u003cimg height=\"79\" width=\"45\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_04_100x100.png?v=1779169240\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eVacuum Pump\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn external vacuum pump (eg: \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is needed for creating ideal vacuum conditions\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -95 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) L370 * W300 * H490 mm (Antechamber and Glovebox-Compatible) for 2*150 mL version\u003c\/li\u003e\n\u003cli\u003e(2) L400 * W580 * H590 mm (Glovebox-Compatible) for 2*300 mL version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~43 kg for 2*150 mL version\u003c\/li\u003e\n\u003cli\u003e~80 kg for 2*300 mL version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"RSC","offers":[{"title":"2*150 mL","offer_id":47691269472486,"sku":"EREPVCM300","price":5299.0,"currency_code":"USD","in_stock":true},{"title":"2*300 mL","offer_id":47691269505254,"sku":"EREPVCM600","price":8299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_main.png?v=1779093562"},{"product_id":"erecpvcmts","title":"ECS-S Compact Planetary Vacuum Centrifugal Mixer (2000 rpm, 2*150 mL) with HMI Touch Screen, ERECPVCMTS","description":"\u003cp\u003eA Planetary Vacuum Centrifugal Mixer (often called a dual-asymmetric centrifugal mixer or a bladeless mixer) represents the pinnacle of premium mixing technology for highly viscous, sensitive, or hard-to-disperse materials. Unlike traditional mixers that use a spinning blade to shear material, a planetary centrifugal mixer uses no blades. Instead, it relies on the physics of dual-axis rotation combined with a deep vacuum to simultaneously mix, de-agglomerate, and completely de-aerate materials within minutes.\u003c\/p\u003e\n\u003cp\u003eThe planetary vacuum machine operates on a dual-rotation mechanism mimicking planetary motion: (1) \u003cstrong\u003eRevolution (The \"Orbit\")\u003c\/strong\u003e: The container holder revolves around a central axis at high speed, generating massive centrifugal force (often exceeding 400 times g). This forces the material outward and downward against the walls of the mixing cup. (2) \u003cstrong\u003eRotation (The \"Spin\")\u003c\/strong\u003e: Simultaneously, the container spins on its own axis at a specific ratio (typically around 1:1 or 2:3 relative to the revolution speed).\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 704.3px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eERECPVCMTS (ER-ECPVCMTS)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 21.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 21.8px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 21.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 1000 W (2*150 mL)\u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 1500 W transformer \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eMixing Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRevolution Speed: Max. 2000 rpm, adjustable\u003c\/li\u003e\n\u003cli\u003eLow Speed Range of 10-1500 rpm, continuous\u003c\/li\u003e\n\u003cli\u003eHigh Speed Range: 1500-2000 rpm, last for 7.5 min \u003c\/li\u003e\n\u003cli\u003eSelf-Rotation Speed: 0.6 times of revolution speed, Max. 1200 rpm \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 17.9856%;\"\u003e\u003cem\u003eHMI Touch Screen\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAll the critical parameters can be set and monitored in the HMI touch screen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERECPVCMTS_02_100x100.png?v=1779163810\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003eMixing Time\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1-999 s, three segments, adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 212.1px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 212.1px;\"\u003e\n\u003cp\u003eMixing Jars\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 212.1px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eJar Volume: 2*150 mL, PA66\u003c\/li\u003e\n\u003cli\u003eEffective Processing Capacity: 75 mL for each jar\u003c\/li\u003e\n\u003cli\u003eA smaller volume of 30 mL\/jar with effective processing capacity 15 mL can be supplied upon request. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_02_100x100.png?v=1779111199\"\u003e        \u003cimg height=\"66\" width=\"90\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREPVCM_03_100x100.png?v=1779111200\"\u003e      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERECPVCMTS_03_100x100.png?v=1779164007\" alt=\"\" style=\"float: none;\" width=\"90\" height=\"69\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eVacuum Pump (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eOptional, not\u003c\/span\u003e \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eincluded)\u003c\/span\u003e\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAn external vacuum pump (eg: \u003ca href=\"https:\/\/echemsupplies.com\/products\/edsrvvp?variant=47513025282278\"\u003eEDSRVVP\u003c\/a\u003e) is needed for creating ideal vacuum conditions\u003c\/li\u003e\n\u003cli\u003eVacuum Level: -95 kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL430 * W310 * H460 mm (Glovebox-Compatible, brushless motor)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~60 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/ac4cdb\/meta\"\u003eD. Grießl, et al., Effect of the Slurry Mixing Process on the Structural Properties of the Anode and the Resulting Fast-Charging Performance of the Lithium-Ion Battery Cell, J. Electrochem. Soc., 2022, 169, 020531\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/ente.201402218\"\u003eV. Wenzel, et al., Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes, Energy Technology, 2015, 3, 692-698\u003c\/a\u003e\u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Default Title","offer_id":47692763037926,"sku":"ERECPVCMTS","price":9999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ERECPVCMTS_main.png?v=1779163811"},{"product_id":"erebr2rtcc","title":"ECS-R Economic Benchtop Roll-to-Roll Tape Casting Coater (150℃, Max. W200 mm), EREBR2RTCC","description":"\u003cp\u003eAn economic benchtop Roll-to-Roll (R2R) Tape Casting Coater is a highly sought-after instrument for universities, start-ups, and battery R\u0026amp;D labs. It provides the continuous manufacturing capability of a pilot line but is scaled down to fit on a standard laboratory benchtop at a fraction of the cost. By removing complex automation, industrial sensors, and massive drying tunnels, these budget-friendly units allow researchers to evaluate how experimental slurries perform during continuous coating runs while using very small material volumes.\u003c\/p\u003e\n\u003cp\u003eTo compress both the physical footprint and the price tag, manufacturers make specific engineering trade-offs: (1) \u003cstrong\u003eCompact Single-Zone Oven\u003c\/strong\u003e: Instead of a multi-meter-long drying tunnel with 3 to 5 independent temperature zones, economic benchtop models use a shortened, highly efficient single-zone drying chamber (typically 500 mm to 800 mm in length). It relies heavily on heated bottom plates (conduction) and basic top fan convection. (2) \u003cstrong\u003eManual Blade Gap Adjustment\u003c\/strong\u003e: Premium systems use motorized slot-die heads with automated thickness tracking. Economic models stick to a precision Doctor Blade (Knife-over-Roll) assembly featuring dual manual micrometer heads. The operator manually dials in the wet gap (e.g., 0–250 µm). (3) \u003cstrong\u003eMechanical Tension Control\u003c\/strong\u003e: Industrial R2R coaters use closed-loop electronic load cells to constantly adjust web tension. Economic units replace these with simple, reliable friction clutches or magnetic particle brakes on the unwind\/rewind shafts that the operator tunes by hand. (4) \u003cstrong\u003eNarrow Web Width\u003c\/strong\u003e: The coating width is typically restricted to 50 mm to 100 mm (2 to 4 inches). This narrow path drastically reduces the machine's overall width, keeping it under a meter long so it can fit on a standard lab bench or inside a standard fume hood.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 876.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEREBR2RTCC (ER-EBR2RTCC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 2000 W \u003c\/li\u003e\n\u003cli\u003eAC110V can be used with a 3000W transformer.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eCoating Area\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe whole heating bed area is L550*W300, which enable the effective coating width is W250 mm (the roller width is 300mm and the maximum loading substrate width is 280 mm, therefore the coating width could be up to 250 mm).  \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 86.8px;\"\u003e\u003cem\u003eCoating Speed\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 86.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eMax. 500 mm\/min, adjustable\u003c\/li\u003e\n\u003cli\u003eThe driving motor only controls the web speed, but tension and alignment control are not available on the standard version. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 126px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 126px;\"\u003e\u003cem\u003eUnwinding \u0026amp; Winding Unit\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 126px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe acceptable substrate cardboard is 3\" and the maximum diameter is 150 mm.\u003c\/li\u003e\n\u003cli\u003eThe roller width is 300 mm\u003c\/li\u003e\n\u003cli\u003eThe alignment and tension-control functions can be supplied upon request. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 106.4px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 106.4px;\"\u003e\u003cem\u003eHeating Temperature \u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 106.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eIR heating cover: Max. 150 ℃ (single-point control)\u003c\/li\u003e\n\u003cli\u003eNo resistance heating at bottom, which is good for cooling process for double-side coating (after one side coating)\u003c\/li\u003e\n\u003cli\u003eNo vacuum suction function is available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 153.8px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 153.8px;\"\u003e\n\u003cp\u003eFilm Applicator\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 153.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA standard doctor blade with 200 mm width is included.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eVarious doctor blade can be found here: \u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47500878053606\"\u003eETCCAFA\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdjustable gap: 0-3 mm (mechanical gauge, 10 um resolution). The digital gauge can be upgraded upon request.   \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e           \u003ca href=\"https:\/\/echemsupplies.com\/products\/etccafa?variant=47500878053606\"\u003e\u003cimg height=\"72\" width=\"72\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ETCCAFA_02_100x100.png?v=1775601057\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHybrid slot die heads (eg: \u003ca href=\"https:\/\/echemsupplies.com\/products\/essahfaw80?variant=47501068435686\"\u003eESSAHFA\u003c\/a\u003e) also can be selected for the coater. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSAHFA_main_100x100.png?v=1776022370\" style=\"float: none;\" width=\"84\" height=\"84\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 67.2px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 67.2px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 67.2px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1200 * W600 * H580 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 17.9856%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 81.6547%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~70 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1149\/1945-7111\/acfdd1\/meta\"\u003eF. Shen, et al., Tape Casting of Thin Electrolyte and Thick Cathode for Halide-Based All-Solid-State Batteries, J. Electrochem. Soc., 2023, 170, 100505\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eM. S. Kim, et al., Multifunctional Separator Coatings for High-Performance \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/advanced.onlinelibrary.wiley.com\/doi\/abs\/10.1002\/admi.201600450\"\u003eLithium–Sulfur Batteries, Adv. Mater. Interfaces, 2016, 3, 1600450\u003c\/a\u003e. \u003c\/p\u003e","brand":"RSC","offers":[{"title":"Default Title","offer_id":47693221462246,"sku":"EREBR2RTCC","price":16999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EREBR2RTCC_main.png?v=1779183655"},{"product_id":"essmr2rcdhc","title":"ECS-SS Multifunctional Roll-to-Roll Coater (Max. 160 mm, Doctor Balde, Reverse Comma, Slot Die, and Microgravure) with Dual Heating Chambers, ESSMR2RCDHC","description":"\u003cp\u003eA high-end lab R2R coater normally offer interchangeable heads: (1) \u003cstrong\u003eSlot-Die Coating\u003c\/strong\u003e: The industry standard for high-precision battery electrodes. It uses a shim and a precision pump to \"meter\" the slurry. This is ideal for your NMP slurries as it minimizes solvent evaporation at the coating head. (2) \u003cstrong\u003eComma Doctor \/ Reverse Comma\u003c\/strong\u003e: Excellent for high-viscosity slurries. It uses a rotating \"comma\" roller to set the wet thickness. (3) \u003cstrong\u003eMicro-Gravure\u003c\/strong\u003e: Best for very thin coatings (like functional ceramic layers on separators or thin ion-exchange membranes). It uses a patterned roller to transfer a precise volume of liquid.\u003c\/p\u003e\n\u003cp\u003eGeneral Introduction of R2R coating methods:\u003c\/p\u003e\n\u003cp\u003e(1). \u003cstrong\u003eDoctor Blade Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_02.png?v=1775622122\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eIn a R2R setup, doctor blade coating is normally called Knife-over-Roll coating. It mainly consists of (1) \u003cstrong\u003eWeb\u003c\/strong\u003e: The aluminum or copper foil is pulled over a high-precision backup roller. (2) \u003cstrong\u003eReservoir\u003c\/strong\u003e: A \"dam\" of slurry is maintained just behind the blade. (3) \u003cstrong\u003eMetering\u003c\/strong\u003e: As the foil moves, the blade (the \"knife\") scrapes off excess slurry. The thickness of the wet coating is determined by the gap between the blade edge and the foil surface. The wet thickness T= Gap * K (where K is a factor, that is usually around 0.5 to 0.7, depending on the slurry's viscosity and the web speed.)\u003c\/p\u003e\n\u003cp\u003e(2). \u003cstrong\u003eReverse Comma Coating (also called Transfer Comma Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_03.png?v=1775622183\" alt=\"\" width=\"140\" height=\"102\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike a standard doctor blade where the foil moves under a stationary knife, a reverse comma system uses a three-roll or two-roll configuration to \"transfer\" a metered film of slurry onto the foil. The key components and features are: (1) \u003cstrong\u003eComma Roller\u003c\/strong\u003e: A high-precision steel cylinder with a \"comma-shaped\" cross-section. It doesn't move during the coating process; instead, it acts as a high-precision gate. (2) \u003cstrong\u003eApplicator (Back-up) Roller\u003c\/strong\u003e: This roller rotates in the opposite direction (reverse) to the web travel. It picks up the slurry from a reservoir and carries it toward the comma gap. (3) \u003cstrong\u003eTransfer\u003c\/strong\u003e: As the foil (web) passes between the rollers, the metered slurry is wiped onto the foil.\u003c\/p\u003e\n\u003cp\u003e(3). \u003cstrong\u003eSlot Die Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cimg height=\"105\" width=\"130\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_04.png?v=1775622901\"\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eWhile doctor blade and comma coating are \"metering\" methods (where you scrape off excess), slot-die is a \"pre-metered\" method. This means the exact volume of slurry pumped into the head is the exact volume that ends up on the foil. Normally slot die coating system consists of three main components: A high-precision pump (usually a syringe or gear pump), a slot-die head, and a back-up roller. The slot die coating head is mainly composed of (1)\u003cstrong\u003e Reservoir (Manifold)\u003c\/strong\u003e: The slurry is pumped into an internal cavity inside the die head designed to distribute the fluid evenly across the entire width. (2) \u003cstrong\u003eShim\u003c\/strong\u003e: A thin, precision-cut metal plate determines the width of the coating and the internal gap of the die. The coating bead is critical for the coating film quality, where the slurry emerges from a narrow \"slot\" and forms a liquid bridge (the \"bead\") between the die lips and the moving foil.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e(3). \u003cstrong\u003eMicrogravure Coating\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cstrong\u003e\u003cimg height=\"96\" width=\"169\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_05.png?v=1775623284\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eMicrogravure coating is a specialized roll-to-roll (R2R) technique used for extremely thin, high-precision coatings. Unlike standard gravure, which uses large rollers and a doctor blade on the foil, microgravure uses a very small diameter engraved roll that rotates in the opposite direction to the web. The R2R microgravure coating system has a small, engraved \"gravure\" roll (typically 20mm to 50mm in diameter) that is partially submerged in a slurry reservoir. There are multiple distinct features: (1) \u003cstrong\u003eEngraving Roll\u003c\/strong\u003e: The roll surface is covered in microscopic cells (patterns like honeycombs or pyramids). The \"cell volume\" determines exactly how much liquid is picked up. (2) \u003cstrong\u003eReverse Rotation\u003c\/strong\u003e: The roll rotates in the opposite direction of the foil (web). This \"kiss-coating\" action shears the liquid as it transfers, resulting in a much smoother surface than traditional gravure. (3) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e: A flexible blade scrapes the excess slurry off the roll before it touches the foil, ensuring only the liquid inside the engraved cells is transferred.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ctable width=\"100%\" style=\"height: 3113.2px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eESMMR2RCDHC (ESM-MR2RC-DHC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 6 k W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller width: 200 mm \u003c\/li\u003e\n\u003cli\u003eLoading substrate width: Max. 180 mm (leave certain space for alignment rectification)\u003c\/li\u003e\n\u003cli\u003eCoating width: Max. 160 mm\u003c\/li\u003e\n\u003cli\u003eMechanical coating speed: 0.01-2.0m\/min (the real coating speed depends on the slurry properties and dry oven length\/temperature)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\u003cem\u003eUnwinding\/Winding Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRoller diameter: 3\", mechanical expansion for tightening the loading roll substrate and collection cardboard. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. winding\/unwinding roll diameter: 250 mm \u003c\/li\u003e\n\u003cli\u003eAlignment Sensors were installed and aligning position resolution could be 0.5 mm. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 1917.4px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 1917.4px;\"\u003e\u003cem\u003eCoating Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 1917.4px;\"\u003e\n\u003cp\u003e   (1) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e            \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_06_100x100.png?v=1775625753\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe doctor blade is made of SS with surface Cr coating and its diameter is Ф80mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-160 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-6000 cP (recommended, higher viscosity up to 10000-15000 cP may also work for thicker electrode).\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e or \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003eEABSFLPP5L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFPP2L_main_100x100.png?v=1775628781\"\u003e    \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003e\u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFLPP5L_main_100x100.png?v=1775689239\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e    (2) \u003cstrong\u003eReverse Comma (Transfer Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e         \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_07_100x100.png?v=1775627010\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф80mm. \u003c\/li\u003e\n\u003cli\u003eThe backing roller is made of rubber (Ф80mm, pneumatic)\u003c\/li\u003e\n\u003cli\u003eThe comma bar is made of SS with surface Cr coating and its diameter is Ф80mm.\u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-160 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-12000 cP (recommended)\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e    (3) \u003cstrong\u003eSlot Die \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e        \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_05_100x100.png?v=1775688285\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф80mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-160 mm, which can be adjusted by the opening mouth of shims. The standard shim thickness is 0.2, 0.3, 0.4, 0.5mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_09_100x100.png?v=1775630854\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 50-12000 cP. For battery application, slurry viscosity is recommended in 2000-8000 cP. \u003c\/li\u003e\n\u003cli\u003eThe precise screw pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003eEASDCPSP\u003c\/a\u003e is the best option for stable slot die coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCPSP_main_100x100.png?v=1775632530\" alt=\"\" style=\"float: none;\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor intermittent coating (or pattern coating) for cylindrical electrode application, the intermittent valve system is highly recommended. For simultaneous dual-layer coating, a customized dual-channel slot die head (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esar2rcsdh?variant=47523176710374\"\u003eESAR2RCSDH\u003c\/a\u003e) can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_10_100x100.png?v=1775633700\" alt=\"\" style=\"float: none;\"\u003e     \u003cimg style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_15_100x100.png?v=1775662134\"\u003e    \u003cimg height=\"82\" width=\"128\" style=\"float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_16_100x100.png?v=1775662200\"\u003e\u003c\/p\u003e\n\u003cp\u003e   (4) \u003cstrong\u003eMicrogravure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e    \u003c\/strong\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_06_100x100.png?v=1775688286\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA standard microgravure rod with Ф30mm is included. The parameters, such as coating width, engraved pattern, mesh number and depth can be customized. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_12_100x100.png?v=1775634349\" alt=\"\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 20-2000 cP.\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 331.8px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 331.8px;\"\u003e\u003cem\u003eHeating Oven Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 331.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeating modes: \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       (1) Convection Heating + Convection Heating (\u003cspan style=\"color: rgb(255, 42, 0);\"\u003estandard version\u003c\/span\u003e)\u003c\/p\u003e\n\u003cp\u003e       (2) Convection Heating + IR Heating (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003e       (3) Convection Heating + UV Curing (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003e       (4) IR Heating + IR Heating (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003e       (5) UV Curing + UV Curing (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003e       (6) IR Heating + UV Curing (\u003cstrong\u003eCustomized\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeating Temperature (Convection\/IR): Max.150℃\u003c\/li\u003e\n\u003cli\u003eThe UV intensity should be determined by customers. \u003c\/li\u003e\n\u003cli\u003eHeating oven length: 0.5 m (two zones)\u003c\/li\u003e\n\u003cli\u003eVentilation: air flow: 570m³\/h (two blowers), 5\" aluminum pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 145.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 145.6px;\"\u003e\n\u003cp\u003eTension Control System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 145.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eTension range: 10-60 N (resolution is ±3 N), which is controlled by swing roller system.\u003c\/li\u003e\n\u003cli\u003eFor low-tension substrate coating (eg: separator and membrane), the specially designed low-tension version is highly recommended since its lowest tension can be down to 5 N.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 187.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 187.6px;\"\u003e\u003ci\u003eGas Compressor\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 187.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is needed to provide 60-80 psi for pneumatic operation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86.8px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 86.8px;\"\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 86.8px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 10px;\"\u003e\u003ci\u003eDimension\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 10px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eL1700 * W710 * H1200 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 22.6619%; height: 47.6px;\"\u003e\u003ci\u003eWeight\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 76.9784%; height: 47.6px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003e~1200 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1361-6463\/aafbf3\/meta\"\u003eH. Li, et al., High-performance supercapacitor carbon electrode fabricated by large-scale roll-to-roll micro-gravure printing,  J. Phys. D: Appl. Phys., 2019, 52, 115501\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/link.springer.com\/article\/10.1007\/s40095-022-00481-w\"\u003eL. A. Román-Ramírez, et al., Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium-ion batteries, International Journal of Energy and Environmental Engineering, 2022, 13, 943-953\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Doctor Blade (Dual Convection Heating)","offer_id":47767886856422,"sku":"ESSMR2RCDHCDB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma (Dual Convection Heating)","offer_id":47767886889190,"sku":"ESSMR2RCDHCRC","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Slot Die (Dual Convection Heating)","offer_id":47767886921958,"sku":"ESSMR2RCDHCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Microgravure (Dual Convection Heating)","offer_id":47767886954726,"sku":"ESSMR2RCDHCMG","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Slot Die (Dual Convection Heating)","offer_id":47767886987494,"sku":"ESSMR2RCDHCBSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Microgravure (Dual Convection Heating)","offer_id":47768301011174,"sku":"ESSMR2RCDHCBM","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma + Slot Die (Dual Convection Heating)","offer_id":47767887020262,"sku":"ESSMR2RCDHCRCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Slot Die + Microgravure (Dual Convection Heating)","offer_id":47768301043942,"sku":"ESSMR2RCDHCSDM","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Slot Die + Microgravure (Dual Convection Heating)","offer_id":47768301076710,"sku":"ESSMR2RCDHCBSDM","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma + Slot Die + Microgravure (Dual Convection Heating)","offer_id":47768301109478,"sku":"ESSMR2RCDHCRCSDM","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RCDHC_main.jpg?v=1781501304"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/collections\/ESMMR2RCDHC_main.png?v=1776019440","url":"https:\/\/echemsupplies.com\/collections\/wet-electrode-fabrication.oembed","provider":"EChem Supplies","version":"1.0","type":"link"}