{"product_id":"ehciacip","title":"ECS-HC Integrated Automatic Cold Isostatic Press (CIP, 20-100T), EHCIACIP","description":"\u003cp\u003eAn Integrated Automatic Cold Isostatic Press (Integrated Automatic CIP) brings together the best of both worlds: the extreme density uniformity of isostatic pressing, the effortless precision of electronic PLC automation, and a clean, self-contained footprint. Unlike modular setups where you have a separate hand pump, hydraulic hoses, and an external vessel, an integrated automatic CIP houses the electric motor, hydraulic pump, high-pressure vessel, and digital touchscreen controls within a single, highly refined tabletop chassis.\u003c\/p\u003e\n\u003cp\u003eIn an integrated automatic system, human error is completely removed from the pressurization cycle. The entire pressing process is handled via closed-loop software control: (1) \u003cstrong\u003eProgramming the Profile\u003c\/strong\u003e: The operator inputs the target pressure (e.g., 300 MPa), the ramp-up rate, the dwell time (e.g., 120 seconds), and the decompression curve. (2) \u003cstrong\u003eMotorized Stroke\u003c\/strong\u003e: A highly accurate brushless DC servo motor drives an internal mechanical ram. (3) \u003cstrong\u003eReal-Time Feedback\u003c\/strong\u003e: An integrated pressure transducer continuously reads the pressure inside the liquid vessel, feeding data back to the PLC to keep the target pressure perfectly steady. (4) \u003cstrong\u003eSolenoid Decompression\u003c\/strong\u003e: At the end of the run, a proportional electronic solenoid valve slowly releases the pressure back to atmospheric levels based on the programmed rate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperation Procedures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e(1)\u003cstrong\u003e \u003c\/strong\u003eLoad the powder into the rubber module and sell it well.\u003c\/p\u003e\n\u003cp\u003e(2) Put the rubber module into the CIP die.\u003c\/p\u003e\n\u003cp\u003e(3) Seal the CIP die and tighten the gas release valve. \u003c\/p\u003e\n\u003cp\u003e(4) Rotate the pressing rod down and touch the CIP die surface. Close the safety door and tighten the hydraulic oil valve.\u003c\/p\u003e\n\u003cp\u003e(5) Set the pressure on touch screen and start the pressurization to the target value. \u003c\/p\u003e\n\u003cp\u003e(6) After pressure retention for certain time, rotate the oil valve to release the pressure. \u003c\/p\u003e\n\u003cp\u003e(7) Open the safety door and loose the pressure screw on the CIP die.\u003c\/p\u003e\n\u003cp\u003e(8) Screw the top pressing die and take it out from the CIP.\u003c\/p\u003e\n\u003cp\u003e(9) Take the rubber module out from the CIP die.\u003c\/p\u003e\n\u003cp\u003e(10) Take the processing sample out from the rubber module. \u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EHCMCIP_operation_procedures_240x240.jpg?v=1784166409\" style=\"margin-bottom: 16px; float: none;\"\u003e       \u003c\/div\u003e\n\u003ctable style=\"height: 1065.53px; width: 100.036%;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 47.6px;\"\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eEHCIACIP (EHC-IACIP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 47.6px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 47.6px;\"\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 47.6px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eAC110 or AC220V±10%, 50\/60Hz, 500W\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 165.2px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 165.2px;\"\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 165.2px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eElectric programmable pressure increment, pressure, and manual pressure release\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e30 segments can be set on touch screen\u003c\/li\u003e\n\u003cli\u003eNo time limit for pressure retention\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTouch screen control panel for parameter setting and display\u003c\/li\u003e\n\u003cli\u003eFour pillars for stable support\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaptop upgrade is available for remote control and data export\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 184.8px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 184.8px;\"\u003e\u003cem\u003e20 T Version Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.2-20 T, accuracy: 0.1 T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCylinder Diameter: Φ95 mm\u003c\/li\u003e\n\u003cli\u003ePiston Traverse Distance: ≤30mm\u003c\/li\u003e\n\u003cli\u003eCIP Die Inner Chamber: Φ22×70mm \u003c\/li\u003e\n\u003cli\u003eChamber Material: #13 die steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Pressure: ≤300 MPa\/12T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimension: L240 * W390 * H560 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 120 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 184.8px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 184.8px;\"\u003e\u003cem\u003e30 T Version Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.3-30 T, accuracy: 0.1 T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCylinder Diameter: Φ110mm\u003c\/li\u003e\n\u003cli\u003ePiston Traverse Distance: ≤30mm\u003c\/li\u003e\n\u003cli\u003eCIP Die Inner Chamber Size: Φ30×150mm\u003c\/li\u003e\n\u003cli\u003eChamber Material: #13 die steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Pressure: ≤300 MPa\/22T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimension: L340 * W430 * H580 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 160 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 184.8px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 184.8px;\"\u003e\u003ci\u003e40 T Version Features\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 184.8px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-40 T, accuracy: 0.1 T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCylinder Diameter: Φ130mm\u003c\/li\u003e\n\u003cli\u003ePiston Traverse Distance: ≤50mm\u003c\/li\u003e\n\u003cli\u003eChamber Size: Φ40×150mm \u003c\/li\u003e\n\u003cli\u003eChamber Material: #13 die steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Pressure: ≤300 MPa\/38T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimension: L370 * W460 * H630 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 210 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 112.4px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 112.4px;\"\u003e\u003ci\u003e60 T Version Features\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 112.4px;\"\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-60 T, accuracy: 0.1 T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCylinder Diameter: Φ150mm\u003c\/li\u003e\n\u003cli\u003ePiston Traverse Distance: ≤50mm\u003c\/li\u003e\n\u003cli\u003eChamber Size: Φ50×150mm\u003c\/li\u003e\n\u003cli\u003eChamber Material: #13 die steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Pressure: ≤300 MPa\/60T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimension: L370 * W460 * H650 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 230 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 20.676%;\"\u003e\u003ci\u003e100 T version Features\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%;\"\u003e\n\u003cul\u003e\n\u003cli\u003e1-100 T, accuracy: 0.1 T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCylinder Diameter: Φ200mm\u003c\/li\u003e\n\u003cli\u003ePiston Traverse Distance: ≤50mm\u003c\/li\u003e\n\u003cli\u003eChamber Size: Φ60×150mm\u003c\/li\u003e\n\u003cli\u003eChamber Material: #13 die steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Pressure: ≤300 MPa\/86T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimension: L400 * W560 * H750 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 320 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 89.2875px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 89.2875px;\"\u003e\u003ci\u003eCertificate\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 89.2875px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eCE certificate\u003c\/li\u003e\n\u003cli\u003eUL and CSA certificate are available upon request with additional charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 49.0375px;\"\u003e\n\u003ctd style=\"width: 20.676%; height: 49.0375px;\"\u003e\u003ci\u003eWarranty\u003c\/i\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 78.9284%; height: 49.0375px;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne year warranty and lifetime technical support\/service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pubs.acs.org\/doi\/full\/10.1021\/acsenergylett.2c01936\"\u003eM. Dixit, et al., The Role of Isostatic Pressing in Large-Scale Production of Solid-State Batteries, ACS Energy Lett. 2022, 7, 11, 3936–3946\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cell.com\/device\/fulltext\/S2666-9986(24)00177-7\"\u003eM. Dixit, et al., Isostatic pressing of multilayer pouch cells and its implications for battery manufacturing, Device, 2024, 2, 100370.\u003c\/a\u003e\u003c\/p\u003e","brand":"HCLD","offers":[{"title":"20 T","offer_id":48000698319078,"sku":"EHCIACIP20T","price":9999.0,"currency_code":"USD","in_stock":true},{"title":"30 T","offer_id":48000698351846,"sku":"EHCIACIP30T","price":10999.0,"currency_code":"USD","in_stock":true},{"title":"40 T","offer_id":48000698384614,"sku":"EHCIACIP40T","price":12999.0,"currency_code":"USD","in_stock":true},{"title":"60 T","offer_id":48000698417382,"sku":"EHCIACIP60T","price":14999.0,"currency_code":"USD","in_stock":true},{"title":"100 T","offer_id":48000698450150,"sku":"EHCIACIP100T","price":18999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EHCIACIP_main.jpg?v=1784233243","url":"https:\/\/echemsupplies.com\/products\/ehciacip","provider":"EChem Supplies","version":"1.0","type":"link"}