{"product_id":"esmmr2rc","title":"ECS-SM Multifunctional Roll-to-Roll Coater (Max. 260 mm, Doctor Balde, Reverse Comma, Slot Die, and Microgravure), ESMMR2RC","description":"\u003cp\u003eA high-end lab R2R coater normally offer interchangeable heads: (1) \u003cstrong\u003eSlot-Die Coating\u003c\/strong\u003e: The industry standard for high-precision battery electrodes. It uses a shim and a precision pump to \"meter\" the slurry. This is ideal for your NMP slurries as it minimizes solvent evaporation at the coating head. (2) \u003cstrong\u003eComma Doctor \/ Reverse Comma\u003c\/strong\u003e: Excellent for high-viscosity slurries. It uses a rotating \"comma\" roller to set the wet thickness. (3) \u003cstrong\u003eMicro-Gravure\u003c\/strong\u003e: Best for very thin coatings (like functional ceramic layers on separators or thin ion-exchange membranes). It uses a patterned roller to transfer a precise volume of liquid.\u003c\/p\u003e\n\u003cp\u003eGeneral Introduction of R2R coating methods:\u003c\/p\u003e\n\u003cp\u003eA high-end lab R2R coater normally offer interchangeable heads: (1) \u003cstrong\u003eSlot-Die Coating\u003c\/strong\u003e: The industry standard for high-precision battery electrodes. It uses a shim and a precision pump to \"meter\" the slurry. This is ideal for your NMP slurries as it minimizes solvent evaporation at the coating head. (2) \u003cstrong\u003eComma Doctor \/ Reverse Comma\u003c\/strong\u003e: Excellent for high-viscosity slurries. It uses a rotating \"comma\" roller to set the wet thickness. (3) \u003cstrong\u003eMicro-Gravure\u003c\/strong\u003e: Best for very thin coatings (like functional ceramic layers on separators or thin ion-exchange membranes). It uses a patterned roller to transfer a precise volume of liquid.\u003c\/p\u003e\n\u003cp\u003eGeneral Introduction of R2R coating methods:\u003c\/p\u003e\n\u003cp\u003e(1). \u003cstrong\u003eDoctor Blade Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_02.png?v=1775622122\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eIn a R2R setup, doctor blade coating is normally called Knife-over-Roll coating. It mainly consists of (1) \u003cstrong\u003eWeb\u003c\/strong\u003e: The aluminum or copper foil is pulled over a high-precision backup roller. (2) \u003cstrong\u003eReservoir\u003c\/strong\u003e: A \"dam\" of slurry is maintained just behind the blade. (3) \u003cstrong\u003eMetering\u003c\/strong\u003e: As the foil moves, the blade (the \"knife\") scrapes off excess slurry. The thickness of the wet coating is determined by the gap between the blade edge and the foil surface. The wet thickness T= Gap * K (where K is a factor, that is usually around 0.5 to 0.7, depending on the slurry's viscosity and the web speed.)\u003c\/p\u003e\n\u003cp\u003e(2). \u003cstrong\u003eReverse Comma Coating (also called Transfer Comma Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_03.png?v=1775622183\" alt=\"\" width=\"140\" height=\"102\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike a standard doctor blade where the foil moves under a stationary knife, a reverse comma system uses a three-roll or two-roll configuration to \"transfer\" a metered film of slurry onto the foil. The key components and features are: (1) \u003cstrong\u003eComma Roller\u003c\/strong\u003e: A high-precision steel cylinder with a \"comma-shaped\" cross-section. It doesn't move during the coating process; instead, it acts as a high-precision gate. (2) \u003cstrong\u003eApplicator (Back-up) Roller\u003c\/strong\u003e: This roller rotates in the opposite direction (reverse) to the web travel. It picks up the slurry from a reservoir and carries it toward the comma gap. (3) \u003cstrong\u003eTransfer\u003c\/strong\u003e: As the foil (web) passes between the rollers, the metered slurry is wiped onto the foil.\u003c\/p\u003e\n\u003cp\u003e(3). \u003cstrong\u003eSlot Die Coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_04.png?v=1775622901\" alt=\"\" width=\"130\" height=\"105\"\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eWhile doctor blade and comma coating are \"metering\" methods (where you scrape off excess), slot-die is a \"pre-metered\" method. This means the exact volume of slurry pumped into the head is the exact volume that ends up on the foil. Normally slot die coating system consists of three main components: A high-precision pump (usually a syringe or gear pump), a slot-die head, and a back-up roller. The slot die coating head is mainly composed of (1)\u003cstrong\u003e Reservoir (Manifold)\u003c\/strong\u003e: The slurry is pumped into an internal cavity inside the die head designed to distribute the fluid evenly across the entire width. (2) \u003cstrong\u003eShim\u003c\/strong\u003e: A thin, precision-cut metal plate determines the width of the coating and the internal gap of the die. The coating bead is critical for the coating film quality, where the slurry emerges from a narrow \"slot\" and forms a liquid bridge (the \"bead\") between the die lips and the moving foil.\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e(3). \u003cstrong\u003eMicrogravure Coating\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_05.png?v=1775623284\" alt=\"\" width=\"169\" height=\"96\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-path-to-node=\"5\"\u003eMicrogravure coating is a specialized roll-to-roll (R2R) technique used for extremely thin, high-precision coatings. Unlike standard gravure, which uses large rollers and a doctor blade on the foil, microgravure uses a very small diameter engraved roll that rotates in the opposite direction to the web. The R2R microgravure coating system has a small, engraved \"gravure\" roll (typically 20mm to 50mm in diameter) that is partially submerged in a slurry reservoir. There are multiple distinct features: (1) \u003cstrong\u003eEngraving Roll\u003c\/strong\u003e: The roll surface is covered in microscopic cells (patterns like honeycombs or pyramids). The \"cell volume\" determines exactly how much liquid is picked up. (2) \u003cstrong\u003eReverse Rotation\u003c\/strong\u003e: The roll rotates in the opposite direction of the foil (web). This \"kiss-coating\" action shears the liquid as it transfers, resulting in a much smoother surface than traditional gravure. (3) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e: A flexible blade scrapes the excess slurry off the roll before it touches the foil, ensuring only the liquid inside the engraved cells is transferred.\u003c\/div\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePart Number\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eESMMR2RC (ESM-MR2RC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003ePower\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAC220V±10%, single phase, 50\/60Hz, 7500 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eGeneral Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRoller width: 300 mm \u003c\/li\u003e\n\u003cli\u003eLoading substrate width: Max. 280 mm\u003c\/li\u003e\n\u003cli\u003eCoating width: Max. 260 mm\u003c\/li\u003e\n\u003cli\u003eMechanical coating speed: 0.01-2.0m\/min (the real coating speed depends on the slurry properties and dry oven length\/temperature)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eUnwinding\/Winding Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRoller diameter: 3\", mechanical expansion for tightening the loading roll substrate and collection cardboard. \u003c\/li\u003e\n\u003cli\u003eMax. winding\/unwinding roll diameter: 250 mm \u003c\/li\u003e\n\u003cli\u003eAlignment Sensors were installed and aligning position resolution could be 0.5 mm. \u003c\/li\u003e\n\u003cli\u003eCoating Roller: Stainless Steel with surface Cr coating, Ф100mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCoating Parts\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e        (1) \u003cstrong\u003eDoctor Blade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_06_100x100.png?v=1775625753\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe doctor blade is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-6000 cP (recommended, higher viscosity up to 10000-15000 cP may also work for thicker electrode).\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e or \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003eEABSFLPP5L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFPP2L_main_100x100.png?v=1775628781\" alt=\"\"\u003e \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsflpp5l?variant=47523679863014\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EABSFLPP5L_main_100x100.png?v=1775689239\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e        (2) \u003cstrong\u003eReverse Comma (Transfer Coating)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_07_100x100.png?v=1775627010\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe backing roller is made of rubber (Ф100mm, pneumatic)\u003c\/li\u003e\n\u003cli\u003eThe comma bar is made of SS with surface Cr coating and its diameter is Ф100mm.\u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the blocking foam. \u003c\/li\u003e\n\u003cli\u003eSlurry Viscosity: 2000-12000 cP (recommended)\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e        (3) \u003cstrong\u003eSlot Die \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_05_100x100.png?v=1775688285\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coating roller is made of SS with surface Cr coating and its diameter is Ф100mm. \u003c\/li\u003e\n\u003cli\u003eThe coating width is 0-260 mm, which can be adjusted by the opening mouth of shims. The standard shim thickness is 0.2, 0.3, 0.4, 0.5mm. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_09_100x100.png?v=1775630854\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 50-12000 cP. For battery application, slurry viscosity is recommended in 2000-8000 cP. \u003c\/li\u003e\n\u003cli\u003eThe precise screw pump \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003eEASDCPSP\u003c\/a\u003e is the best option for stable slot die coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e         \u003ca href=\"https:\/\/echemsupplies.com\/products\/easdcpsp?variant=47522239578342\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EASDCPSP_main_100x100.png?v=1775632530\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor intermittent coating (or pattern coating) for cylindrical electrode application, the intermittent valve system is highly recommended. For simultaneous dual-layer coating, a customized dual-channel slot die head (\u003ca href=\"https:\/\/echemsupplies.com\/products\/esar2rcsdh?variant=47523176710374\"\u003eESAR2RCSDH\u003c\/a\u003e) can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_10_100x100.png?v=1775633700\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_15_100x100.png?v=1775662134\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_16_100x100.png?v=1775662200\" alt=\"\" width=\"128\" height=\"82\"\u003e\u003c\/p\u003e\n\u003cp\u003e        (4) \u003cstrong\u003eMicrogravure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_06_100x100.png?v=1775688286\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA standard microgravure rod with Ф30mm is included. The parameters, such as coating width, engraved pattern, mesh number and depth can be customized. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_12_100x100.png?v=1775634349\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlurry Viscosity: 20-2000 cP.\u003c\/li\u003e\n\u003cli\u003eThe slurry feeder \u003ca href=\"https:\/\/echemsupplies.com\/products\/eabsfpp2l?variant=47522046673126\"\u003eEABSFPP2L\u003c\/a\u003e can be considered. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eHeating Oven Features\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHeating mode: Convection heating (hot air flow). Other heating methods of IR and UV can be customized upon request. Various heating modules are switchable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e          \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_02_100x100.png?v=1775686106\" alt=\"\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_03_100x100.png?v=1775686032\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeating temperature: Max.130℃\u003c\/li\u003e\n\u003cli\u003eHeating oven length: 0.8 m (standard version). If customer want to increase the heating oven length to increase the coating speed, the dual-heating-oven design can be supplied. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESSMR2RC_13_160x160.png?v=1775634733\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVentilation: air flow: 570m³\/h, 5\" aluminum pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eTension Control System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTension range: 10-60 N (resolution is ±3 N), which is controlled by swing roller system.\u003c\/li\u003e\n\u003cli\u003eFor low-tension substrate coating (eg: separator and membrane), the specially designed low tension version is highly recommended since its lowest tension can be down to 5 N.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eGas Compressor\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eA gas compressor (\u003ca href=\"https:\/\/echemsupplies.com\/products\/euqofgc?variant=47513044156646\"\u003eEUQOFGC\u003c\/a\u003e) is needed to provide 60-80 psi for pneumatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e       \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/EUQOFGC_main_100x100.png?v=1775414665\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eCertification\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eUL and CSA certification is available upon request at extra cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eDimension\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eL2000 * W950 * H1300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eWeight\u003c\/em\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e~1100 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0255270112001997\"\u003eM. Schmitt, et al., Slot-die processing of lithium-ion battery electrodes—Coating window characterization, Chemical Engineering and Processing: Process Intensification, 2013, 68, 32-37\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1361-6463\/aafbf3\/meta\"\u003eH. Li, et al., High-performance supercapacitor carbon electrode fabricated by large-scale roll-to-roll micro-gravure printing, J. Phys. D: Appl. Phys., 2019, 52, 115501\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/link.springer.com\/article\/10.1007\/s40095-022-00481-w\"\u003eL. A. Román-Ramírez, et al., Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium-ion batteries, International Journal of Energy and Environmental Engineering, 2022, 13, 943-953\u003c\/a\u003e. \u003c\/p\u003e","brand":"SZKJ","offers":[{"title":"Doctor Blade","offer_id":47523596108006,"sku":"ESMMR2RCDB","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma","offer_id":47523596140774,"sku":"ESMMR2RCRC","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Slot Die","offer_id":47523596173542,"sku":"ESMMR2RCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Microgravure","offer_id":47523596206310,"sku":"ESMMR2RCMG","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Slot Die","offer_id":47523596239078,"sku":"ESMMR2RCBSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Reverse Comma + Slot Die","offer_id":47523596271846,"sku":"ESMMR2RCRCSD","price":8888888.0,"currency_code":"USD","in_stock":true},{"title":"Blade + Reverse Comma + Slot Die","offer_id":47523649552614,"sku":"ESMMR2RCBRCSD","price":8888888.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0774\/6591\/1526\/files\/ESMMR2RC_main.png?v=1775667380","url":"https:\/\/echemsupplies.com\/products\/esmmr2rc","provider":"EChem Supplies","version":"1.0","type":"link"}