LiNi0.9Co0.05Mn0.05O2 (NCM9055, Polycrystalline) Cathode Electrode with High Loading (16.8-28.5 mg/cm2, Wet Coating) for Li-Ion Battery, CLIBCENCM9055HLWC
Use your own shipping account?
We support FedEx, UPS, and DHL third-party billing for institutional customers.
Place your order first, then email shipping@echemsupplies.com with your account details and order number. We'll generate the label using your account and refund your shipping charges, less a handling fee.
Lithium Nickel Cobalt Manganese Oxide (LiNi0.9Co0.05Mn0.05O2, NCM9055) with polycrystalline structure electrode with high loading can be used as high-performance lithium-ion battery cathode. The round disc shape with single-side coating is suitable for coin cell testing, while the rectangle sheet shape with single- or double-side coating is designed for single-layer or multiple-layer pouch cell testing. The roll shape with double-side coating is designed for cylindrical cell electrodes after slitting.
| Part Number | CLIBCENCM9055HLWC (C-LIB-CE-NCM9055-HLWC) |
| Current collector | 15 um aluminum foil with 1 um carbon coating layer on each side |
| Coating Material | NCM9055 polycrystalline powder |
| Active Material Portion | 97.4% |
| Electrode Dimension |
Round disc shape (single-side): D = 10 - 15 mm (other diameter discs are also available). Rectangle sheet shape: L150mm*W100mm |
| Package Size |
Round disk D=10-15 mm (50 pcs/pack) Rectangle sheet with SS & DS coating (5 pcs/pack) |
| Loading Mass Density |
(1) 16.8 mg/cm2 (single side); (2) 28.5 mg/cm2 (single side) (3) 57.0 mg/cm2 (double side) |
| Compaction Density | ~3.0 g/cm3 (single side); ~3.3 g/cm3 (double side) |
| First Discharging Capacity |
~210 mAh/g [0.1C, 3.0-4.3 V vs Li/Li+, Half Cell] [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 2.0%FEC] |
| First Columbic Efficiency | 94.6 % |
Notes: (1) Please store the high loading polycrystalline NCM9055 electrodes in a dry area (glovebox is preferred); (2) The battery electrodes are highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use.
References:
- H. Sun, et al. Impact of Microcrack Generation and Surface Degradation on a Nickel-Rich Layered Li[Ni0.9Co0.05Mn0.05]O2 Cathode for Lithium-Ion Batteries, Chem. Mater., 2017, 29, 8486–8493.
-
H. Sun, et al. Structural Optimization of Al-Doped Li[Ni0.90Co0.05Mn0.05]O2 Cathode for Li-Ion Batteries, J. Electrochem. Soc., 2022, 169, 110542.