LiMn0.6Fe0.4PO4 (LMFP) Coated Aluminum Foil as Cathode Electrode (Disc, Sheet, Roll) for Li-Ion Battery, CLIBCELMP

The lithium manganese iron phosphate (LiMn0.6Fe0.4PO4, LMFP) coated on aluminum foil electrode (disc, sheet, roll) can be used as lithium-ion battery cathode. The round disc shape with single-side coating is suitable for coin cell testing, while the rectangle sheet shape with single- or double-side coating is designed for single-layer or multiple-layer pouch cell testing. The roll shape with double-side coating is designed for cylindrical cell electrodes after slitting. 

Part Number	CLIBCELMFP (C-LIB-CE-LMFP)
Current collector	15 um aluminum foil
Coating Material	LMFP powder with surface carbon
Coating Slurry Recipe	LMFP : PVDF: Super P = 95% : 2.5% : 2.5%
Electrode Dimension	Round disc shape: D =10-15 mm Rectangle sheet shape: Substrate (L240mm*W180mm); Coating: (L240 mm*150 mm, empty width of 15 mm at each side for tab welding) Roll shape: 10 m length
Package Size	Round disk D15 mm (50 pcs/pack) Rectangle sheet with SS & DS coating (5 pcs/pack) Roll shape: 1 roll
Loading Mass Density	14.0 mg/cm2 (single side); 28.0 mg/cm2 (double side)
Compaction Density	1.9 g/cm3 (single side); 2.3 g/cm3 (double side)
First Discharging Capacity	~154 mAh/g (0.2 C)
First Columbic Efficiency	92.8 % (Recommended Electrolyte: 1M LiPF6 in ECEC:DMC:EMC=1:1:1 with 1.0%VC, 1-3 cycles of formation should be done before real testing)

Notes: (1) Please store the LMFP electrodes in a dry area (glovebox is preferred); (2) The battery electrodes are highly recommended to be dried at 80-100°C in a vacuum oven for 6-12 h before use. 

References: 

1. S. Li, et al. Structural and electrochemical properties of LiMn0.6Fe0.4PO4 as a cathode material for flexible lithium-ion batteries and self-charging power pack, Nano Energy, 2018, 52, 510-516.
2. J. Cheng, et al. Morphology effects on LiMn0.6Fe0.4PO4 cathode for lithium-ion batteries with high energy density, J. Power Sources, 2026, 661, 238593.