ECS-N 1200℃ High Pressure (≤4 MPa) Horizontal Tube Furnace (Alloy Steel Tube: Φ23*1000mm) with Touch Screen Control, ENHPHTFTSC1200

• ENHPHTFTSC1200 (EN-HPHTFTSC1200)

• Three layers protection for high safety   
• Circular heating element distribution design for uniform heating 
• Modular structure for durable and easy maintenance 
• Stable pressure control and intelligent temperature control 

• Power: AC220V±10%, single-phases, 50/60Hz, 1500 W
• Heating Temperature: Max. 1150℃
• Heating Resolution: ±1℃
• Heating Rate: ≤20℃/min
  
• Pressure Limits: (1) ≤600℃, ≤ 24 MPa; (2) ≤800℃, ≤ 20 MPa; (3) ≤900℃, ≤ 12 MPa; (4) ≤1000℃, ≤ 6 MPa; (5) ≤1100℃, ≤ 4 MPa;
• Processing Alloy Steel Tube: Φ23*1000mm (other tube dimension also can be supplied upon request).
• (Optional) One-end closed alloy steel tube with large size (Φ36mm*1000mm) also can be supplied upon request.

• Heating Zone: 300 mm (constant temperature heating zone length is 120 mm)
  
• Heating Element: Mo-doped FeCrAl alloy

• Pressure Detection and Control: the pressure sensor is installed on the high pressure chamber and connected with PLC control system for in-real time display; High pressure solenoid valve will be opened for pressure release when the real pressure in tube is high than the setting value. The Max, release pressure for the solenoid valve is 15 MPa. 

• The CF flange structure with copper sealing gasket is shown below. 1/4NPS connection.
  

• One flowmeter has been installed and inspected for ready use. 

• Programmable temperature setting profiles in a 7" touch screen control panel. There are maximum 15 heating profiles can be saved for repeatable use.   

Vacuum Pump (Optional)

• A vacuum pump (EDSRVVP) can be supplied to provide high vacuum (~10 Pa) for sample processing in quartz tube

• The high temperature alloy steel tubing is used and the maximum operation temperature is 1150℃. Under over pressurization, deformation will happen and "bubble" is formed at the weakest point to release the pressure for safety.