Skip to product information
ECS-N 1700℃ Constant Pressure Horizontal Tube Furnace (Alumina Tube: Φ80*1000mm) with Touch Screen Control, ENCPHTFTSC1700

ECS-N 1700℃ Constant Pressure Horizontal Tube Furnace (Alumina Tube: Φ80*1000mm) with Touch Screen Control, ENCPHTFTSC1700

In Stock (Ships 3~8 Days) SKU: ENCPHTFTSC1700
Use your own shipping account?

We support FedEx, UPS, and DHL third-party billing for institutional customers.

Place your order first, then email shipping@echemsupplies.com with your account details and order number. We'll generate the label using your account and refund your shipping charges, less a handling fee.

Review third-party shipping terms →


Maintaining a constant pressure environment (whether under a slight positive pressure or a regulated rough vacuum) inside a horizontal tube furnace requires integrating specialized gas-delivery and pressure-regulation accessories with your furnace setup. To achieve stable, constant-pressure operations, laboratory tube furnace systems rely on the following components: (1) Stainless Steel Vacuum Sealing Flanges (Double-O-Ring Design): Attached to both ends of the quartz or alumina tube, these flanges feature precision needle valves, mechanical pressure gauges, and quick-connect hose barbs to maintain gas tightness. (2) Upstream Gas Regulation (Mass Flow Controllers / Pressure Regulators): Incoming process gases (Ar, N2, forming gas) are regulated using high-precision digital mass flow controllers (MFCs) or dual-stage cylinder regulators to ensure a steady inlet feed rate. (3) Downstream Pressure Control (Back-Pressure Regulators / Throttle Valves): To maintain a constant positive pressure inside the tube (e.g., maintaining 0.02 MPa / 3 psi), a downstream mechanical back-pressure regulator or automatic throttle valve is positioned on the exhaust line to restrict gas escape until the target internal pressure is reached. (4) Vacuum / Exhaust Integration: For constant-pressure or dynamic-vacuum work, needle valves allow fine-tuning of the exhaust rate to balance continuous gas inflow against vacuum pump extraction.

Part Number
  • ENCPHTFTSC1700 (EN-CPHTFTSC1700)
General Features
  • Constant pressure control: The inner tube pressure can maintain a constant value by the embedded pressure control system even under heating or cooling conditions.  
  • Various types of gases (eg: air, N2/Ar, reductive gas) can be compatible
  • Advanced temperature control system for covering RT to 1650℃
  • Tubing structure is suitable for small batch sample processing
  • PLC+HMI for convenience operation
Tube Furnace Features
  • Power: AC220V±10%, single-phases, 50/60Hz, 4500 W
  • Heating Temperature: Max. 1700 ℃ (<1 h)
  • Continuous Operation Temperature: Max. 1650 ℃
  • Heating Resolution: ±1℃
  • Heating Rate: ≤20℃/min
  • Heating Hearth Chamber: φ150*310
  • Processing alumina tube: Φ80*1000mm
  • Heating Zone: 310 mm (constant temperature heating zone length is 180 mm)
  • Heating Element: Si-Mo heating tubes with high corrosion resistance

         

  • Thermocouple: B-type
  • Sealing Flanges and tube support are included.

                    

  • One flowmeter has been installed and inspected for ready use. 

           

  • Programmable temperature setting profiles in a 7" touch screen control panel. There are maximum 15 heating profiles can be saved for repeatable use.   
Constant Pressure Control
  • Precise vacuum valve is used to finely tune the vacuum resistance and keep gas amount balance at inlet & outlet, which will maintain the constant tube pressure.

         

  • The digital vacuum gauge can measure and control the vacuum pressure.

       

Vacuum Pump (Optional)


  • A vacuum pump (EDSRVVP) can be supplied to provide high vacuum (~10 Pa) for sample processing in quartz tube

         

Notes
  • The door is not allowed to be opened when the furnace temperature higher than 300 ℃
  • The inner pressure inside the quartz tube should be less than 0.125 MPa (absolute value) to avoid damage by overpressure
  • Under vacuum condition, the heating temperature should be less than 800 ℃
  • The gas pressure regulator (0.01-0.15 MPa) should be installed if the high pressure gas tank is used 
  • Please watch out the gas pressure in quartz tube when the inlet and outlet gas valves are closed during heating condition. 
  • The minor cracks on the furnace hearth insulation layer are normal and won't affect its operation. 
Certification
  • CE certified
  • UL and CSA certification is available upon request at extra cost
  • One-year warranty and life-time technical support. 
Dimension
  • L1000 × D600× H730 mm
Weight
  • ~130 kg


You may also like