ECS-N 1200℃ Horizontal Sliding Tube Furnace (Quartz Tube: Φ60-100*1000mm) with Fast Infrared Heating & Cooling, ENHSTF1200FIHC

A 1200°C Horizontal Sliding Tube Furnace configured for Fast Thermal Processing (RTP) uses a mobile heating chamber mounted on heavy-duty linear sliding rails to achieve rapid thermal quenching and instantaneous heating profiles. Unlike stationary tube furnaces, the entire high-temperature heating body is mounted on a sliding track (ranging from 1000mm to 1200mm in rail length).

Fast Heating: The furnace body can be pre-heated to the target temperature (e.g., 1000°C–1200°C). Once stable, the sliding mechanism (manual or motorized via a DC drive) rapidly shifts the hot zone over the sample position, or the sample is pushed into the pre-heated zone, yielding rapid thermal ramping.  Fast Cooling: Conversely, at the end of the dwell cycle, the furnace body instantly slides away from the processing tube. Combined with built-in forced-air cooling fans blowing across the quartz or alumina tube, this configuration achieves rapid quenching rates (up to several degrees per second).

Part Number	ENHSTF1200FIHC (EN-HSTF1200-FIHC)
General Features	High purity alumina ceramic fiber as insulation materials for energy-saving. Short wavelength infrared heating for fast heating Ring-type uniform heating Automatic sliding for the heating zone when the temperature approaches to the set point.  Intelligent HMI for convenient parameter setting and execution
Tube Furnace Features	Power: AC380V±10%, three-phases, 50/60Hz, 15 kW Heating Temperature: Max. 1150℃ (<1 h) Continuous Operation Temperature: 1100 ℃ (±1℃)  Heating/Cooling Rate: ≤100℃/s Processing quartz tube: (1) Φ60*1000mm; (2) Φ80*1000mm; (3) Φ100*1000mm Heating Zone: 200 mm (constant heating temperature zone is 150 mm) Heating Element: short wavelength infrared heater (1.1-1.5 um)           Sealing Flanges are included, but the temperature calibration probe can be supplied upon request with additional cost.                  One flowmeter has been installed and inspected for ready use.            Programmable temperature setting profiles in a 7" touch screen control panel. There are maximum 15 heating profiles can be saved for repeatable use.
Vacuum Pump (Optional)	A vacuum pump (EDSRVVP) can be supplied to provide high vacuum (~10 Pa) for sample processing in quartz tube.
Pre-Heating Unit (Optional)	The pre-heating unit made by 316L material can be added for various gases (even corrosive) pre-treatment (up to 600℃)
Notes	The door is not allowed to be opened when the furnace temperature higher than 300 ℃ The inner pressure inside the quartz tube should be less than 0.125 MPa (absolute value) to avoid damage by overpressure Under vacuum condition, the heating temperature should be less than 800 ℃ The gas pressure regulator (0.01-0.15 MPa) should be installed if the high pressure gas tank is used  Please watch out the gas pressure in quartz tube when the inlet and outlet gas valves are closed during heating condition.  The minor cracks on the furnace hearth insulation layer are normal and won't affect its operation.
Certification	CE certified UL and CSA certification is available upon request at extra cost One-year warranty and life-time technical support.
Dimension	L1120 × D520× H530 mm
Weight	~100 kg